Skip to main content
main-content

Zeitschrift

The International Journal of Advanced Manufacturing Technology

The International Journal of Advanced Manufacturing Technology 9-10/2021

Ausgabe 9-10/2021

Inhaltsverzeichnis ( 46 Artikel )

31.05.2021 | Critical Review | Ausgabe 9-10/2021

A comprehensive review on the application of nanofluids in the machining process

Kumaran Kadirgama

31.05.2021 | Critical Review | Ausgabe 9-10/2021

A review on deep learning in machining and tool monitoring: methods, opportunities, and challenges

Vahid Nasir, Farrokh Sassani

01.06.2021 | Critical Review | Ausgabe 9-10/2021

Screw-assisted 3D printing with granulated materials: a systematic review

Joaquim Manoel Justino Netto, Henrique Takashi Idogava, Luiz Eduardo Frezzatto Santos, Zilda de Castro Silveira, Pedro Romio, Jorge Lino Alves

28.05.2021 | ORIGINAL ARTICLE | Ausgabe 9-10/2021 Open Access

Defining acoustic emission-based condition monitoring indicators for monitoring piston rod seal and bearing wear in hydraulic cylinders

Vignesh V. Shanbhag, Thomas J. J. Meyer, Leo W. Caspers, Rune Schlanbusch

28.05.2021 | ORIGINAL ARTICLE | Ausgabe 9-10/2021

Cutter position optimization with tool runout for flank milling of non-developable ruled surfaces

Sen Kong, Yecui Yan, Liqiang Zhang, Qianqian Feng

29.05.2021 | ORIGINAL ARTICLE | Ausgabe 9-10/2021

Optimal tool orientation in 3 + 2-axis machining considering machine kinematics

Laureen Grandguillaume, Sylvain Lavernhe, Christophe Tournier

29.05.2021 | ORIGINAL ARTICLE | Ausgabe 9-10/2021

High resolution electrohydrodynamic printing of conductive ink with an aligned aperture coaxial printhead

Muhammad Asif Ali Rehmani, Khalid Mahmood Arif

29.05.2021 | ORIGINAL ARTICLE | Ausgabe 9-10/2021 Open Access

Mechanical and corrosion resistance properties of AA7075-T6 sub-zero formed sheets

Rachele Bertolini, Enrico Simonetto, Luca Pezzato, Alberto Fabrizi, Andrea Ghiotti, Stefania Bruschi

29.05.2021 | ORIGINAL ARTICLE | Ausgabe 9-10/2021

Additive manufacture of porous ceramic proximal interphalangeal (PIP) joint implant: design and process optimization

Esmat Sheydaeian, Osezua Obehi Ibhadode, Eugene Hu, Robert Pilliar, Rita Kandel, Ehsan Toyserkani

29.05.2021 | ORIGINAL ARTICLE | Ausgabe 9-10/2021

Comparison of FEA simulations and experimental results for as-built additively manufactured dogbone specimens

Prathamesh Baikerikar, Cameron J. Turner

29.05.2021 | ORIGINAL ARTICLE | Ausgabe 9-10/2021

3D numerical modeling and experimental validation of machining Nomex® honeycomb materials

Mohamed Jaafar, Mohammed Nouari, Hamid Makich, Abdelhadi Moufki

30.05.2021 | ORIGINAL ARTICLE | Ausgabe 9-10/2021

A correction method for milling stability analysis based on local truncation error

Yi Wu, Youpeng You, Anmin Liu, Bin Deng, Tuo Ye, Weifang Chen

31.05.2021 | ORIGINAL ARTICLE | Ausgabe 9-10/2021

Effect of micro textures on the cutting performance of circular saw blade

Yang Lu, Jianxin Deng, Qinghao Sun, Dongliang Ge, Jiaxing Wu, Zhihui Zhang

31.05.2021 | ORIGINAL ARTICLE | Ausgabe 9-10/2021 Open Access

Tool wear and spring back analysis in orthogonal machining unidirectional CFRP with respect to tool geometry and fibre orientation

Lukas Seeholzer, Fabian Kneubühler, Frank Grossenbacher, Konrad Wegener

31.05.2021 | ORIGINAL ARTICLE | Ausgabe 9-10/2021 Open Access

Selection of parameters in nanosecond pulsed wave laser micro-welding

Julio Coroado, Supriyo Ganguly, Wojciech Suder, Stewart Williams, Sonia Meco, Goncalo Pardal

31.05.2021 | ORIGINAL ARTICLE | Ausgabe 9-10/2021

Machine tool analyzer: a device for identifying 13 position-independent geometric errors for five-axis machine tools

Seung-Han Yang, Kwang-Il Lee

31.05.2021 | ORIGINAL ARTICLE | Ausgabe 9-10/2021

A novel investigation into the edge effect reduction of 4340 steel disc through induction hardening process using magnetic flux concentrators

Mahyar Parvinzadeh, Sasan Sattarpanah Karganroudi, Narges Omidi, Noureddine Barka, Mohamed Khalifa

01.06.2021 | ORIGINAL ARTICLE | Ausgabe 9-10/2021

Additive manufacturing landscape and materials perspective in 4D printing

Muhammad Imran Farid, Wenzheng Wu, Xilin Liu, PeiPei Wang

01.06.2021 | ORIGINAL ARTICLE | Ausgabe 9-10/2021

The analysis of tool vibration signals by spectral kurtosis and ICEEMDAN modes energy for insert wear monitoring in turning operation

Mohamed Lamine Bouhalais, Mourad Nouioua

01.06.2021 | ORIGINAL ARTICLE | Ausgabe 9-10/2021

Prediction of electrode loss in micro-EDM drilling based on discharge time

Yuhua Huang, Qixuan Xing, Ming Liu, Qinhe Zhang

02.06.2021 | ORIGINAL ARTICLE | Ausgabe 9-10/2021

Experimental and computational analyses of material flow characteristics in friction stir welding

Rahul Kumar, Abhishek Kumar Lal, Ram Prakash Bharti, Vivek Pancholi

03.06.2021 | ORIGINAL ARTICLE | Ausgabe 9-10/2021

Fixed abrasive polishing: the effect of particle size on the workpiece roughness and sub-surface damage

Xinyu Luo, Wei Yang, Yuan Qian

03.06.2021 | ORIGINAL ARTICLE | Ausgabe 9-10/2021

A feedback toolpath generation method for compound trimmed surface with machine’s dynamic characteristics confined

Sun Yangfan, Shen Hongyao, Fu Jianzhong

03.06.2021 | ORIGINAL ARTICLE | Ausgabe 9-10/2021

Microstructure and mechanical properties of Ti-Mo-Nb alloys designed using the cluster-plus-glue-atom model for orthopedic applications

Lerato Raganya, Nthabiseng Moshokoa, Babatunde Obadele, Elizabeth Makhatha, Ronald Machaka

04.06.2021 | ORIGINAL ARTICLE | Ausgabe 9-10/2021

Influence of the main technological parameters and material properties of the workpiece on the geometrical accuracy of the machined surface at wedm

Ľuboslav Straka, Ján Piteľ, Ivan Čorný

04.06.2021 | ORIGINAL ARTICLE | Ausgabe 9-10/2021

Classification of transfer modes in gas metal arc welding using acoustic signal analysis

Mitchell Cullen, Sipei Zhao, Jinchen Ji, Xiaojun Qiu

04.06.2021 | ORIGINAL ARTICLE | Ausgabe 9-10/2021

Microstructure and impact toughness of high strength steel weld metals deposited by MCAW-RE process using different shielding gases

Walker A. S. Filho, Guilherme M. S. Silveira, Jeferson F. M. Costa, Matheus C. Mendes, Luís Felipe G. de Souza, Jorge C. F. Jorge

04.06.2021 | ORIGINAL ARTICLE | Ausgabe 9-10/2021

Quantitative influences of successive reuse on thermal decomposition, molecular evolution, and elemental composition of polyamide 12 residues in selective laser sintering

Feifei Yang, Angela Schnuerch, Xu Chen

04.06.2021 | ORIGINAL ARTICLE | Ausgabe 9-10/2021

Study on grinding force of Si3N4 ceramics in random rotation grinding with truncated polyhedral grains

Xianglei Zhang, Peng Chen, Jing Zhang, Sisi Li, Hongming Zhou

05.06.2021 | ORIGINAL ARTICLE | Ausgabe 9-10/2021

Vibration-based tool wear monitoring using artificial neural networks fed by spectral centroid indicator and RMS of CEEMDAN modes

Mourad Nouioua, Mohamed Lamine Bouhalais

05.06.2021 | ORIGINAL ARTICLE | Ausgabe 9-10/2021

Failure and forming quality study of metallic foil blanking with different punch-die clearances

Xiao Li, Zhanghua Chen, Chaofang Dong

05.06.2021 | ORIGINAL ARTICLE | Ausgabe 9-10/2021

Liquid filling and external extrusion composite forming tiny size spiral tube with equal wall thickness

Changshuai Shi, Jinping Li, Xiaohua Zhu

05.06.2021 | ORIGINAL ARTICLE | Ausgabe 9-10/2021

A practical fabrication strategy for wire arc additive manufacturing of metallic parts with wire structures

Ziping Yu, Zengxi Pan, Donghong Ding, Joseph Polden, Fengyang He, Lei Yuan, Huijun Li

05.06.2021 | ORIGINAL ARTICLE | Ausgabe 9-10/2021

Experimental evaluation of rotational and traverse speeds effects on corrosion behavior of friction stir welded joints of aluminum alloy AA5052-H32

Roosvel Soto-Díaz, Anderson Sandoval-Amador, Jimy Unfried-Silgado

05.06.2021 | ORIGINAL ARTICLE | Ausgabe 9-10/2021

Experimental study on machining germanium wafer with ice particle, fixed abrasive tools

Ze Yu, Yuli Sun, Guiguan Zhang, Wenzhuang Lu, Dunwen Zuo

06.06.2021 | ORIGINAL ARTICLE | Ausgabe 9-10/2021

Effects of sandwich core structure and infill rate on mechanical properties of 3D-printed wood/PLA composites

Nadir Ayrilmis, Mirko Kariz, Milan Šernek, Manja Kitek Kuzman

06.06.2021 | ORIGINAL ARTICLE | Ausgabe 9-10/2021

Experimental study on near-polished ultra-precision grinding of fused glass with the assistant of pure CeO2 atomizing liquid

Long Zhang, Gong Yu Liu, Li Min Zhu, Tian Feng Zhou, Peng Guo, Peng Liu

06.06.2021 | ORIGINAL ARTICLE | Ausgabe 9-10/2021

Study of the tool path generation method for an ultra-precision spherical complex surface based on a five-axis machine tool

Tianji Xing, Xuesen Zhao, Zhipeng Cui, Rongkai Tan, Tao Sun

07.06.2021 | ORIGINAL ARTICLE | Ausgabe 9-10/2021

Investigation of inner-jet electrochemical face grinding of thin-walled rotational parts

Feng Wang, Jianshe Zhao, Min Kang

07.06.2021 | ORIGINAL ARTICLE | Ausgabe 9-10/2021

An analytical prediction model of surface topography generated in 4-axis milling process

Ruihu Zhou, Qinlin Chen

07.06.2021 | ORIGINAL ARTICLE | Ausgabe 9-10/2021

Unified plastic limit analysis of the cap bottom generated by a dedicated cutting tool in orbital drilling

Lan Zhou, Guosheng An, Wensheng Li, Haijin Wang, Wei Li

07.06.2021 | ORIGINAL ARTICLE | Ausgabe 9-10/2021

Researches on the EDM of magnetized sintered NdFeB permanent magnetic material

Xue Bai, Ting-Yi Yang, Xi-Peng Gong, Li Li, Jia-Zhi Cui

07.06.2021 | ORIGINAL ARTICLE | Ausgabe 9-10/2021

A precision sizing method for cold extruded sun gear with internal-external tooth shapes

Zuofa Liu, Jie Zhou, Zhiyuan Qu, Xi Wang, Qiang Liang, Wenjie Feng

07.06.2021 | ORIGINAL ARTICLE | Ausgabe 9-10/2021

Feedrate optimization method based on machining allowance optimization and constant power constraint

Baohai Wu, Yang Zhang, Guangxin Liu, Ying Zhang

21.06.2021 | Retraction Note | Ausgabe 9-10/2021

Retraction Note: 3D printing of surface characterization and finite element analysis improvement of PEEK-HAP-GO in bone implant

Bankole I. Oladapo, S. Abolfazl Zahedi, Seng Chong, Francis T. Omigbodun, Idowu O. Malachi

25.06.2021 | Retraction Note | Ausgabe 9-10/2021

Retraction Note: Research on tool change time and the dynamic reliability of the machining process based on sensitivity analysis

Xingang Wang, Baoyan Wang, Chunmei LV, Xiaoming Chen, Yimin Zhang

Aktuelle Ausgaben

Premium Partner

    Marktübersichten

    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen. 

    Bildnachweise