Skip to main content
main-content

Zeitschrift

The International Journal of Advanced Manufacturing Technology

The International Journal of Advanced Manufacturing Technology 9-10/2021

Ausgabe 9-10/2021

Inhaltsverzeichnis ( 45 Artikel )

06.07.2021 | Critical Review | Ausgabe 9-10/2021

A state-of-the-art review on sensors and signal processing systems in mechanical machining processes

Mustafa Kuntoğlu, Emin Salur, Munish Kumar Gupta, Murat Sarıkaya, Danil Yu. Pimenov

15.07.2021 | Critical Review | Ausgabe 9-10/2021

Finite element methods used in clinching process

Denglin Qin, Chao Chen, Yawen Ouyang, Jinliang Wu, Huiyang Zhang

15.07.2021 | Critical Review | Ausgabe 9-10/2021

Finite element simulation of ultrasonic-assisted machining: a review

Mohammad Lotfi, Javad Akbari

15.07.2021 | Critical Review | Ausgabe 9-10/2021

Research progress of improving surface friction properties by surface texture technology

Keyang Chen, Xuefeng Yang, Yifeng Zhang, Hui Yang, Guojie Lv, Yalong Gao

12.07.2021 | ORIGINAL ARTICLE | Ausgabe 9-10/2021

Development of an expert system for optimal design of the grinding process

Mohammad Baraheni, Bahman Azarhoushang, Amir Daneshi, Mohammadi Kadivar, Saied Amini

12.07.2021 | ORIGINAL ARTICLE | Ausgabe 9-10/2021

Simulating a high-speed abrasive particle impacting on a tensile block using SPH-FEM

Yanjie Liu, Yue Zhao, Kenji Yoshigoe, Shijin Zhang, Ming Chen

12.07.2021 | ORIGINAL ARTICLE | Ausgabe 9-10/2021

The effect of tool pin size and taper angle on the thermal process and plastic material flow in friction stir welding

Jie Chen, Lei Shi, Chuansong Wu, Yuanning Jiang

12.07.2021 | ORIGINAL ARTICLE | Ausgabe 9-10/2021

A new single probe scanning method for on-machine measurement of roundness error

Bin Duan, Ziqiang Yin, Ning Chai, Songtao Meng, Jianhua Yao

13.07.2021 | ORIGINAL ARTICLE | Ausgabe 9-10/2021

Surface and interior residual stress analysis of a deep-drawn 1180-MPa class ultra-high strength steel sheet with scratch marks

Takashi Matsuno, Yuta Ochiai, Yoshitaka Okitsu, Masayuki Iga, Ami Kohri, Takao Mikami

13.07.2021 | ORIGINAL ARTICLE | Ausgabe 9-10/2021

Experimental investigation and optimization of delamination factors in the drilling of jute fiber–reinforced polymer biocomposites with multiple estimators

Bachir Adda, Ahmed Belaadi, Messaouda Boumaaza, Mostefa Bourchak

13.07.2021 | ORIGINAL ARTICLE | Ausgabe 9-10/2021

Numerical and experimental study on the flow characteristics and the erosive ability of magnetorheological jet

Zhe Lv, Rongguo Hou, Ping Lu, Xiangtian Wang

14.07.2021 | ORIGINAL ARTICLE | Ausgabe 9-10/2021

Fatigue design curves for laser-metal-deposited type 420 stainless steel and effect of an interval during deposition process

Yoshihiko Uematsu, Ryosuke Sasaki, Toshifumi Kakiuchi, Seiei Yamamoto, Akihiro Zensho, Ri-ichiro Sano

15.07.2021 | ORIGINAL ARTICLE | Ausgabe 9-10/2021

Effect of cutting parameters and cutting edge preparation on milling of VP20TS steel

Marcos Guilherme Carvalho Braulio Barbosa, Amauri Hassui, Patrick Abreu de Oliveira

15.07.2021 | ORIGINAL ARTICLE | Ausgabe 9-10/2021

A method of welding path planning of steel mesh based on point cloud for welding robot

Yusen Geng, Yuankai Zhang, Xincheng Tian, Xiaorui Shi, Xiujing Wang, Yigang Cui

15.07.2021 | ORIGINAL ARTICLE | Ausgabe 9-10/2021

Understanding novel assisted electrode from a theoretical and experimental perspectives for EDM of aluminum nitride ceramics

Asif Rashid, Asma Perveen, Muhammad P. Jahan

15.07.2021 | ORIGINAL ARTICLE | Ausgabe 9-10/2021

Laser forming process of complex surface on Al7075

Xiaogang Wang, Yongjun Shi, Yankuo Guo, Xianfa Li, Xiaoyu Zhao

15.07.2021 | ORIGINAL ARTICLE | Ausgabe 9-10/2021

A general method for calibration of milling force coefficients and cutter runout parameters simultaneously for helical end milling

Zhao Zhang, Zepeng Liang, Ming Luo, Baohai Wu, Dinghua Zhang

15.07.2021 | ORIGINAL ARTICLE | Ausgabe 9-10/2021

A novel accurate positioning method for object pose estimation in robotic manipulation based on vision and tactile sensors

Dan Zhao, Fuchun Sun, Zongtao Wang, Quan Zhou

15.07.2021 | ORIGINAL ARTICLE | Ausgabe 9-10/2021

Investigations on tool wear, surface roughness, cutting temperature, and chip formation in machining of Cu-B-CrC composites

Üsame Ali Usca, Mahir Uzun, Mustafa Kuntoğlu, Emine Sap, Munish Kumar Gupta

15.07.2021 | ORIGINAL ARTICLE | Ausgabe 9-10/2021 Open Access

C-ALB (Collaborative Assembly Line Balancing): a new approach in cobot solutions

Giovanni Boschetti, Maurizio Faccio, Mattia Milanese, Riccardo Minto

16.07.2021 | ORIGINAL ARTICLE | Ausgabe 9-10/2021

Fabrication of S-shaped micron-sized constrictions on FeC (steel) surface using femtosecond laser ablation with beam shaping

Patrice Umenne

16.07.2021 | ORIGINAL ARTICLE | Ausgabe 9-10/2021

Evaluation of machinability-based sustainability indicators in the eco-benign turning of Ti3Al2.5V alloy with textured tools

Rupinder Singh, Munish Kumar Gupta, Murat Sarikaya, Mozammel Mia, A. Garcia-Collado

16.07.2021 | ORIGINAL ARTICLE | Ausgabe 9-10/2021

A new hot forging method for the die temperature higher than the billet temperature

Lin Yuan, Qinghe Wei, Le Han, Debin Shan, Bin Guo

16.07.2021 | ORIGINAL ARTICLE | Ausgabe 9-10/2021

Fabrication of large-scale infrared diffractive lens arrays on chalcogenide glass by means of step-and-repeat hot imprinting and non-isothermal glass molding

Yang Shu, Tiantong Chen, Wenchen Zhou, Zhixiong Zhou, Allen Y. Yi

16.07.2021 | ORIGINAL ARTICLE | Ausgabe 9-10/2021 Open Access

Analysis of dimensional accuracy for micro-milled areal material measures with kinematic simulation

Katja Klauer, Matthias Eifler, Benjamin Kirsch, Volker Böß, Jörg Seewig, Jan C. Aurich

16.07.2021 | ORIGINAL ARTICLE | Ausgabe 9-10/2021

An investigation on discharge servo parameters and machining servo mode optimization of MS-WEDM

Huliang Ma, Yanqing Wang, Ming Lv, Shengqiang Yang

16.07.2021 | ORIGINAL ARTICLE | Ausgabe 9-10/2021

Effect of end-clamping constraints on bending crashworthiness of square profiles

Quirino Estrada, Julio Vergara-Vázquez, Dariusz Szwedowicz, Alejandro Rodriguez-Mendez, Oscar A. Gómez-Vargas, Gonzalo Partida-Ochoa, Martin Ortiz-Domínguez

17.07.2021 | ORIGINAL ARTICLE | Ausgabe 9-10/2021

Milling Inconel 718 workpiece with cryogenically treated and untreated cutting tools

Hüseyin Gürbüz, Şehmus Baday

17.07.2021 | ORIGINAL ARTICLE | Ausgabe 9-10/2021

Effect of surface line/regular hexagonal texture on tribological performance of cemented carbide tool for machining Ti-6Al-4V alloys

Kairui Zheng, Fazhan Yang, Mingzhang Pan, Guodong Zhao, Dongchao Bian

17.07.2021 | ORIGINAL ARTICLE | Ausgabe 9-10/2021

Cutting temperature measurement in turning of thermoplastic composites using a tool-work thermocouple

Petr Masek, Pavel Zeman, Petr Kolar

19.07.2021 | ORIGINAL ARTICLE | Ausgabe 9-10/2021

Modeling and optimization of weld bead profile with varied welding stages for weathering steel A606

Dawei Zhao, Yuriy Bezgans, Nikita Vdonin, Liudmila Radionova, Vitaly Bykov

19.07.2021 | ORIGINAL ARTICLE | Ausgabe 9-10/2021

A mixed reality platform for assembly assistance based on gaze interaction in industry

Zenglei Wang, Shusheng Zhang, Xiaoliang Bai

19.07.2021 | ORIGINAL ARTICLE | Ausgabe 9-10/2021

Fabrication and characterization of in situ structural health monitoring hybrid continuous carbon/glass fiber–reinforced thermoplastic composite

Congcong Luan, Xinhua Yao, Jianzhong Fu

19.07.2021 | ORIGINAL ARTICLE | Ausgabe 9-10/2021

Magnetic-enhanced common conductive channel characteristics of two-electrode TIG

Yanli Zhu, Xinkun Xu, Runtao Liu, Liming Liu

19.07.2021 | ORIGINAL ARTICLE | Ausgabe 9-10/2021

Numerical modeling and experimental investigation of brass wire forming by friction stir back extrusion

Parviz Asadi, Mostafa Akbari

19.07.2021 | ORIGINAL ARTICLE | Ausgabe 9-10/2021

A novel approach to modelling the bond characteristics between CFRP fabrics and steel plate joints under quasi-static tensile loads

Hemad Hamedi, Ata Kamyabi-Gol

19.07.2021 | ORIGINAL ARTICLE | Ausgabe 9-10/2021

3D printing of porcelain: finite element simulation of anisotropic sintering

Charles Manière, Christelle Harnois, Sylvain Marinel

19.07.2021 | ORIGINAL ARTICLE | Ausgabe 9-10/2021

Design of precision finishing method for cold extruded sun gear with internal-external tooth shapes

Zuofa Liu, Qiuyun Wang, Jie Zhou, Wenjie Feng, Qiang Liang

19.07.2021 | ORIGINAL ARTICLE | Ausgabe 9-10/2021

A measurement method of the belt grinding allowance of hollow blades based on blue light scanning

Guijian Xiao, Shuai Liu, Youdong Zhang, Yuan Wu, Bengqiang Chen, Shayu Song

19.07.2021 | ORIGINAL ARTICLE | Ausgabe 9-10/2021

Development and research of the press operating mechanism, made in the form of the wedge-joint mechanism with a curving wedge for separation operations

Sergii G. Karnaukh, Nataly V. Chosta, Oleg E. Markov, Volodymyr V. Kukhar

20.07.2021 | ORIGINAL ARTICLE | Ausgabe 9-10/2021

Comparison in performance by emulsion and SiC nanofluids HS-WEDM multi-cutting process

Cuixia Guo, Zhangyong Wu, Xing Wang, Jianping Zhang

20.07.2021 | ORIGINAL ARTICLE | Ausgabe 9-10/2021

A prediction model for bending springback of AZM120 sheet metal and mechanical compensation of CNC automatic panel bender

Chen Chen, Junjie Gong, Yangdong Chen, Jinrong Wang

20.07.2021 | ORIGINAL ARTICLE | Ausgabe 9-10/2021

On-line autonomous path optimization for multi-pass incremental forming using model predictive control

An He, Chenhao Wang, Sheng Liu, Paul A. Meehan

14.07.2021 | Application | Ausgabe 9-10/2021

Theoretical modeling and experimental research on the depth of radial material removal for flexible grinding

Gang Zheng, Keyan Chen, Xiaojian Zhang, Xu Zhang

17.05.2021 | Correction | Ausgabe 9-10/2021

Correction to: A new in-process material removal rate monitoring approach in abrasive belt grinding

Lijuan Ren, Guangpeng Zhang, Yuan Wang, Qian Zhang, Fei Wang, Yumei Huang

Aktuelle Ausgaben

Premium Partner

    Marktübersichten

    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen. 

    Bildnachweise