Skip to main content
Erschienen in: The International Journal of Advanced Manufacturing Technology 1-4/2019

13.08.2019 | ORIGINAL ARTICLE

The layout design in reconfigurable manufacturing systems: a literature review

verfasst von: Isabela Maganha, Cristovao Silva, Luis Miguel D. F. Ferreira

Erschienen in: The International Journal of Advanced Manufacturing Technology | Ausgabe 1-4/2019

Einloggen

Aktivieren Sie unsere intelligente Suche um passende Fachinhalte oder Patente zu finden.

search-config
loading …

Abstract

The layout is an important issue in the design of manufacturing systems. In conventional systems, the layout rarely changes after the initial design. However, as the market demands are changing more frequently, layout configurations must be capable of reconfiguring the arrangement of resources to suit new production requirements, while minimising material handling and relocation costs and maximising savings in material flow and inventory costs. This paper presents a literature review on the layout design of reconfigurable manufacturing systems (RMS), focusing on reconfigurable layouts, which have been attracting increasing attention in recent years. A systematic literature network analysis was applied to identify trends, evolutionary trajectories and key issues that are influencing the development of knowledge in this field of study. The results are analysed and discussed using a bibliometric and a chronological citation network analysis. The major findings of this research includes (1) the layout design of RMS must be integrated in the process of RMS design, which, in turn, should be considered as a cyclic process, instead of divided into phases. (2) The core characteristics of reconfigurability and the layout design cannot be dissociated. (3) Operational performance measures are rarely considered in the reconfigurable layout problem, despite their importance. (4) Optimisation approaches have been widely used to solve the reconfigurable layout problem. However, they might not be the most suitable approach to deal with the uncertainty and variability present in manufacturing environments in which reconfigurable layouts are required. Finally, this paper identifies gaps in the literature and suggests directions for future research.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Literatur
1.
Zurück zum Zitat Koren Y, Gu X, Guo W (2018) Reconfigurable manufacturing systems: principles, design and future trends. Front Mech Eng 13:121–136CrossRef Koren Y, Gu X, Guo W (2018) Reconfigurable manufacturing systems: principles, design and future trends. Front Mech Eng 13:121–136CrossRef
2.
Zurück zum Zitat Koren Y, Heisel U, Jovane F et al (1999) Reconfigurable manufacturing systems. CIRP Ann Manuf Technol 48:527–540CrossRef Koren Y, Heisel U, Jovane F et al (1999) Reconfigurable manufacturing systems. CIRP Ann Manuf Technol 48:527–540CrossRef
3.
Zurück zum Zitat Renzi C, Leali F, Cavazzuti M, Andrisano AO (2014) A review on artificial intelligence applications to the optimal design of dedicated and reconfigurable manufacturing systems. Int J Adv Manuf Technol 72:403–418CrossRef Renzi C, Leali F, Cavazzuti M, Andrisano AO (2014) A review on artificial intelligence applications to the optimal design of dedicated and reconfigurable manufacturing systems. Int J Adv Manuf Technol 72:403–418CrossRef
4.
Zurück zum Zitat Hasan MA, Sarkis J, Shankar R (2012) Agility and production flow layouts: an analytical decision analysis. Comput Ind Eng 62:898–907CrossRef Hasan MA, Sarkis J, Shankar R (2012) Agility and production flow layouts: an analytical decision analysis. Comput Ind Eng 62:898–907CrossRef
5.
Zurück zum Zitat Wang L (2011) Alternative shop-floor re-layout design due to dynamic operation changes. In: ASME-MSEC, pp 1–7 Wang L (2011) Alternative shop-floor re-layout design due to dynamic operation changes. In: ASME-MSEC, pp 1–7
6.
Zurück zum Zitat Setchi RM, Lagos N (2004) Reconfigurability and reconfigurable manufacturing systems - state-of-the-art review. Ind Informatics, 2004 INDIN ’04 2004 2nd IEEE Int Conf, pp 529–535 Setchi RM, Lagos N (2004) Reconfigurability and reconfigurable manufacturing systems - state-of-the-art review. Ind Informatics, 2004 INDIN ’04 2004 2nd IEEE Int Conf, pp 529–535
7.
Zurück zum Zitat Koren Y, Shpitalni M (2010) Design of reconfigurable manufacturing systems. J Manuf Syst 29:130–141CrossRef Koren Y, Shpitalni M (2010) Design of reconfigurable manufacturing systems. J Manuf Syst 29:130–141CrossRef
8.
Zurück zum Zitat Xiaobo Z, Jiancai W, Zhenbi L (2000) A stochastic model of a reconfigurable manufacturing system part 1: a framework. Int J Prod Res 38:2273–2285MATHCrossRef Xiaobo Z, Jiancai W, Zhenbi L (2000) A stochastic model of a reconfigurable manufacturing system part 1: a framework. Int J Prod Res 38:2273–2285MATHCrossRef
9.
Zurück zum Zitat Youssef AMA, ElMaraghy HA (2008) Availability consideration in the optimal selection of multiple-aspect RMS configurations. Int J Prod Res 46:5849–5882MATHCrossRef Youssef AMA, ElMaraghy HA (2008) Availability consideration in the optimal selection of multiple-aspect RMS configurations. Int J Prod Res 46:5849–5882MATHCrossRef
10.
Zurück zum Zitat Saxena LK, Jain PK (2012) A model and optimisation approach for reconfigurable manufacturing system configuration design. Int J Prod Res 50:3359–3381CrossRef Saxena LK, Jain PK (2012) A model and optimisation approach for reconfigurable manufacturing system configuration design. Int J Prod Res 50:3359–3381CrossRef
11.
Zurück zum Zitat Dahane M, Benyoucef L (2016) An adapted NSGA-II algorithm for a reconfigurable manufacturing system (RMS) design under machines reliability constraints. In: Metaheuristics for production systems. Springer, Cham, pp 93–107 Dahane M, Benyoucef L (2016) An adapted NSGA-II algorithm for a reconfigurable manufacturing system (RMS) design under machines reliability constraints. In: Metaheuristics for production systems. Springer, Cham, pp 93–107
12.
Zurück zum Zitat Oke A, Abou-El-Hossein K, Theron NJ (2011) The design and development of a reconfigurable manufacturing system. S Afr J Ind Eng 22:121–132 Oke A, Abou-El-Hossein K, Theron NJ (2011) The design and development of a reconfigurable manufacturing system. S Afr J Ind Eng 22:121–132
13.
Zurück zum Zitat Benderbal HH, Dahane M, Benyoucef L (2017) Layout evolution effort for product family in reconfigurable manufacturing system design. IFAC-PapersOnLine 50:10166–10171CrossRef Benderbal HH, Dahane M, Benyoucef L (2017) Layout evolution effort for product family in reconfigurable manufacturing system design. IFAC-PapersOnLine 50:10166–10171CrossRef
14.
Zurück zum Zitat Singh SP, Sharma RRK (2006) A review of different approaches to the facility layout problems. Int J Adv Manuf Technol 30:425–433CrossRef Singh SP, Sharma RRK (2006) A review of different approaches to the facility layout problems. Int J Adv Manuf Technol 30:425–433CrossRef
15.
Zurück zum Zitat Abbasi M, Houshmand M (2011) Production planning and performance optimization of reconfigurable manufacturing systems using genetic algorithm. Int J Adv Manuf Technol 54:373–392CrossRef Abbasi M, Houshmand M (2011) Production planning and performance optimization of reconfigurable manufacturing systems using genetic algorithm. Int J Adv Manuf Technol 54:373–392CrossRef
16.
Zurück zum Zitat Kheirkhah A, Navidi H, Bidgoli MM (2015) Dynamic facility layout problem: a new bilevel formulation and some metaheuristic solution methods. IEEE Trans Eng Manag 62:396–410CrossRef Kheirkhah A, Navidi H, Bidgoli MM (2015) Dynamic facility layout problem: a new bilevel formulation and some metaheuristic solution methods. IEEE Trans Eng Manag 62:396–410CrossRef
17.
Zurück zum Zitat Meng G, Heragu SS, Zijm H (2004) Reconfigurable layout problem. Int J Prod Res 42:4709–4729MATHCrossRef Meng G, Heragu SS, Zijm H (2004) Reconfigurable layout problem. Int J Prod Res 42:4709–4729MATHCrossRef
18.
Zurück zum Zitat Benjaafar S, Heragu SS, Irani SA (2002) Next generation factory layouts: research challenges and recent progress. Interfaces (Providence) 32:58–76CrossRef Benjaafar S, Heragu SS, Irani SA (2002) Next generation factory layouts: research challenges and recent progress. Interfaces (Providence) 32:58–76CrossRef
19.
Zurück zum Zitat Baykasoǧlu A (2003) Capability-based distributed layout approach for virtual manufacturing cells. Int J Prod Res 41:2597–2618CrossRef Baykasoǧlu A (2003) Capability-based distributed layout approach for virtual manufacturing cells. Int J Prod Res 41:2597–2618CrossRef
20.
Zurück zum Zitat Baykasoǧlu A, Göçken M (2010) Capability-based distributed layout and its simulation based analyses. J Intell Manuf 21:471–485CrossRef Baykasoǧlu A, Göçken M (2010) Capability-based distributed layout and its simulation based analyses. J Intell Manuf 21:471–485CrossRef
21.
Zurück zum Zitat Maganha I, Silva C (2017) A theoretical background for the reconfigurable layout problem. Procedia Manuf 11:2025–2033CrossRef Maganha I, Silva C (2017) A theoretical background for the reconfigurable layout problem. Procedia Manuf 11:2025–2033CrossRef
22.
Zurück zum Zitat Drira A, Pierreval H, Hajri-Gabouj S (2007) Facility layout problems: a survey. Annu Rev Control 31:255–267CrossRef Drira A, Pierreval H, Hajri-Gabouj S (2007) Facility layout problems: a survey. Annu Rev Control 31:255–267CrossRef
23.
Zurück zum Zitat Anjos MF, Vieira MVC (2017) Mathematical optimization approaches for facility layout problems: the state-of-the-art and future research directions. Eur J Oper Res 261:1–16MathSciNetMATHCrossRef Anjos MF, Vieira MVC (2017) Mathematical optimization approaches for facility layout problems: the state-of-the-art and future research directions. Eur J Oper Res 261:1–16MathSciNetMATHCrossRef
24.
Zurück zum Zitat Hosseini-Nasab H, Fereidouni S, Ghomi SMTF, Fakhrzad MB (2018) Classification of facility layout problems: a review study. Int J Adv Manuf Technol 94:957–977CrossRef Hosseini-Nasab H, Fereidouni S, Ghomi SMTF, Fakhrzad MB (2018) Classification of facility layout problems: a review study. Int J Adv Manuf Technol 94:957–977CrossRef
25.
Zurück zum Zitat Askin RG (2013) Contributions to the design and analysis of cellular manufacturing systems. Int J Prod Res 51:6778–6787CrossRef Askin RG (2013) Contributions to the design and analysis of cellular manufacturing systems. Int J Prod Res 51:6778–6787CrossRef
26.
Zurück zum Zitat Houshyar AN, Leman Z, Moghadam HP et al (2014) Literature review on dynamic cellular manufacturing system. IOP Conf Ser Mater Sci Eng 58:012016CrossRef Houshyar AN, Leman Z, Moghadam HP et al (2014) Literature review on dynamic cellular manufacturing system. IOP Conf Ser Mater Sci Eng 58:012016CrossRef
27.
Zurück zum Zitat Moslemipour G, Lee TS, Rilling D (2012) A review of intelligent approaches for designing dynamic and robust layouts in flexible manufacturing systems. Int J Adv Manuf Technol 60:11–27CrossRef Moslemipour G, Lee TS, Rilling D (2012) A review of intelligent approaches for designing dynamic and robust layouts in flexible manufacturing systems. Int J Adv Manuf Technol 60:11–27CrossRef
28.
Zurück zum Zitat Colicchia C, Strozzi F (2012) Supply chain risk management: a new methodology for a systematic literature review. Supply Chain Manag An Int J 17:403–418CrossRef Colicchia C, Strozzi F (2012) Supply chain risk management: a new methodology for a systematic literature review. Supply Chain Manag An Int J 17:403–418CrossRef
29.
Zurück zum Zitat Ding Y, Chowdhury GG, Foo S (2001) Bibliometric cartography of information retrieval research by using co-word analysis. Inf Process Manag 37:817–842MATHCrossRef Ding Y, Chowdhury GG, Foo S (2001) Bibliometric cartography of information retrieval research by using co-word analysis. Inf Process Manag 37:817–842MATHCrossRef
30.
Zurück zum Zitat Fera M, Fruggiero F, Lambiase A et al (2017) The role of uncertainty in supply chains under dynamic modeling. Int J Ind Eng Comput 8:119–140 Fera M, Fruggiero F, Lambiase A et al (2017) The role of uncertainty in supply chains under dynamic modeling. Int J Ind Eng Comput 8:119–140
31.
Zurück zum Zitat Strozzi F, Colicchia C, Creazza A, Noè C (2017) Literature review on the ‘smart factory’ concept using bibliometric tools. Int J Prod Res 55:1–20CrossRef Strozzi F, Colicchia C, Creazza A, Noè C (2017) Literature review on the ‘smart factory’ concept using bibliometric tools. Int J Prod Res 55:1–20CrossRef
32.
Zurück zum Zitat Colicchia C, Creazza A, Noè C, Strozzi F (2019) Information sharing in supply chains: a review of risks and opportunities using the systematic literature network analysis (SLNA). Supply Chain Manag 24:5–21CrossRef Colicchia C, Creazza A, Noè C, Strozzi F (2019) Information sharing in supply chains: a review of risks and opportunities using the systematic literature network analysis (SLNA). Supply Chain Manag 24:5–21CrossRef
33.
Zurück zum Zitat Vargas SA, Esteves GRT, Maçaira PM et al (2019) Wind power generation: a review and a research agenda. J Clean Prod 218:850–870CrossRef Vargas SA, Esteves GRT, Maçaira PM et al (2019) Wind power generation: a review and a research agenda. J Clean Prod 218:850–870CrossRef
34.
Zurück zum Zitat Benderbal HH, Dahane M, Benyoucef L (2017) Flexibility-based multi-objective approach for machines selection in reconfigurable manufacturing system (RMS) design under unavailability constraints. Int J Prod Res 55:6033–6051CrossRef Benderbal HH, Dahane M, Benyoucef L (2017) Flexibility-based multi-objective approach for machines selection in reconfigurable manufacturing system (RMS) design under unavailability constraints. Int J Prod Res 55:6033–6051CrossRef
35.
Zurück zum Zitat Nooy W, Mrvar A, Batagelj V (2011) Exploratory social network analysis with Pajek (Strucutural analysis in the social sciences; 34), 2nd ed. Cambridge University Press Nooy W, Mrvar A, Batagelj V (2011) Exploratory social network analysis with Pajek (Strucutural analysis in the social sciences; 34), 2nd ed. Cambridge University Press
36.
Zurück zum Zitat Liu JS, Ly LYY (2012) An integrated approach for main path analysis: development of the Hirsch index as an example. J Am Soc Inf Sci Technol 63:528–542CrossRef Liu JS, Ly LYY (2012) An integrated approach for main path analysis: development of the Hirsch index as an example. J Am Soc Inf Sci Technol 63:528–542CrossRef
37.
Zurück zum Zitat Abdi MR, Labib AW (2003) A design strategy for reconfigurable manufacturing systems (RMSs) using analytical hierarchical process (AHP): a case study. Int J Prod Res 41:2273–2299CrossRef Abdi MR, Labib AW (2003) A design strategy for reconfigurable manufacturing systems (RMSs) using analytical hierarchical process (AHP): a case study. Int J Prod Res 41:2273–2299CrossRef
38.
Zurück zum Zitat Abdi MR, Labib AW (2004) Grouping and selecting products: the design key of reconfigurable manufacturing systems (RMSs). Int J Prod Res 42:521–546CrossRef Abdi MR, Labib AW (2004) Grouping and selecting products: the design key of reconfigurable manufacturing systems (RMSs). Int J Prod Res 42:521–546CrossRef
39.
Zurück zum Zitat Youssef AMA, ElMaraghy HA (2006) Modelling and optimization of multiple-aspect RMS configurations. Int J Prod Res 44:4929–4958MATHCrossRef Youssef AMA, ElMaraghy HA (2006) Modelling and optimization of multiple-aspect RMS configurations. Int J Prod Res 44:4929–4958MATHCrossRef
40.
Zurück zum Zitat Youssef AMA, ElMaraghy HA (2007) Optimal configuration selection for reconfigurable manufacturing systems. Int J Flex Manuf Syst 19:67–106MATHCrossRef Youssef AMA, ElMaraghy HA (2007) Optimal configuration selection for reconfigurable manufacturing systems. Int J Flex Manuf Syst 19:67–106MATHCrossRef
41.
Zurück zum Zitat Dou JP, Dai X, Meng Z (2009) Graph theory-based approach to optimize single-product flow-line configurations of RMS. Int J Adv Manuf Technol 41:916–931CrossRef Dou JP, Dai X, Meng Z (2009) Graph theory-based approach to optimize single-product flow-line configurations of RMS. Int J Adv Manuf Technol 41:916–931CrossRef
42.
Zurück zum Zitat Dou JP, Dai X, Meng Z (2010) Optimisation for multi-part flow-line configuration of reconfigurable manufacturing system using GA. Int J Prod Res 48:4071–4100MATHCrossRef Dou JP, Dai X, Meng Z (2010) Optimisation for multi-part flow-line configuration of reconfigurable manufacturing system using GA. Int J Prod Res 48:4071–4100MATHCrossRef
43.
Zurück zum Zitat Benderbal HH, Dahane M, Benyoucef L (2018) Modularity assessment in reconfigurable manufacturing system (RMS) design: an archived multi-objective simulated annealing-based approach. Int J Adv Manuf Technol 94:729–749CrossRef Benderbal HH, Dahane M, Benyoucef L (2018) Modularity assessment in reconfigurable manufacturing system (RMS) design: an archived multi-objective simulated annealing-based approach. Int J Adv Manuf Technol 94:729–749CrossRef
44.
Zurück zum Zitat Waltman L, van Eck NJ, Noyons ECM (2010) A unified approach to mapping and clustering of bibliometric networks. J Inf Secur 4:629–635 Waltman L, van Eck NJ, Noyons ECM (2010) A unified approach to mapping and clustering of bibliometric networks. J Inf Secur 4:629–635
45.
Zurück zum Zitat Deif AM, ElMaraghy WH (2006) A systematic design approach for reconfigurable manufacturing systems. In: Advances in design. Springer, London, pp 219–228MATHCrossRef Deif AM, ElMaraghy WH (2006) A systematic design approach for reconfigurable manufacturing systems. In: Advances in design. Springer, London, pp 219–228MATHCrossRef
46.
Zurück zum Zitat Benkamoun N, Huyet A-L, Kouiss K (2013) Reconfigurable assembly system configuration design approaches for product change. In: 5th Industrial Engineering and Systems Management, pp 1–8 Benkamoun N, Huyet A-L, Kouiss K (2013) Reconfigurable assembly system configuration design approaches for product change. In: 5th Industrial Engineering and Systems Management, pp 1–8
47.
Zurück zum Zitat Andersen AL, Brunoe TD, Nielsen K, Rösiö C (2017) Towards a generic design method for reconfigurable manufacturing systems: analysis and synthesis of current design methods and evaluation of supportive tools. J Manuf Syst 42:179–195CrossRef Andersen AL, Brunoe TD, Nielsen K, Rösiö C (2017) Towards a generic design method for reconfigurable manufacturing systems: analysis and synthesis of current design methods and evaluation of supportive tools. J Manuf Syst 42:179–195CrossRef
48.
Zurück zum Zitat Rabbani M, Samavati M, Ziaee MS, Rafiei H (2014) Reconfigurable dynamic cellular manufacturing system: a new bi-objective mathematical model. RAIRO-Rech Opér 48:75–102MathSciNetMATHCrossRef Rabbani M, Samavati M, Ziaee MS, Rafiei H (2014) Reconfigurable dynamic cellular manufacturing system: a new bi-objective mathematical model. RAIRO-Rech Opér 48:75–102MathSciNetMATHCrossRef
49.
Zurück zum Zitat Lee S, Tilbury DM (2007) Deadlock-free resource allocation control for a reconfigurable manufacturing system with serial and parallel configuration. IEEE Trans Syst Man Cybern Part C Appl Rev 37:1373–1381CrossRef Lee S, Tilbury DM (2007) Deadlock-free resource allocation control for a reconfigurable manufacturing system with serial and parallel configuration. IEEE Trans Syst Man Cybern Part C Appl Rev 37:1373–1381CrossRef
50.
Zurück zum Zitat Padayachee J, Bright G (2014) Synthesis of evolving cells for reconfigurable manufacturing systems. IOP Conf Ser Mater Sci Eng 65:12009–12017CrossRef Padayachee J, Bright G (2014) Synthesis of evolving cells for reconfigurable manufacturing systems. IOP Conf Ser Mater Sci Eng 65:12009–12017CrossRef
51.
Zurück zum Zitat Niroomand I, Kuzgunkaya O, Bulgak AA (2014) The effect of system configuration and ramp-up time on manufacturing system acquisition under uncertain demand. Comput Ind Eng 73:61–74CrossRef Niroomand I, Kuzgunkaya O, Bulgak AA (2014) The effect of system configuration and ramp-up time on manufacturing system acquisition under uncertain demand. Comput Ind Eng 73:61–74CrossRef
52.
Zurück zum Zitat Koren Y, Wang W, Gu X (2016) Value creation through design for scalability of reconfigurable manufacturing systems. Int J Prod Res 55:1227–1242CrossRef Koren Y, Wang W, Gu X (2016) Value creation through design for scalability of reconfigurable manufacturing systems. Int J Prod Res 55:1227–1242CrossRef
53.
Zurück zum Zitat Bruccoleri M, Renna P, Perrone G (2005) Reconfiguration: a key to handle exceptions and performance deteriorations in manufacturing operations. Int J Prod Res 43:4125–4145CrossRef Bruccoleri M, Renna P, Perrone G (2005) Reconfiguration: a key to handle exceptions and performance deteriorations in manufacturing operations. Int J Prod Res 43:4125–4145CrossRef
54.
Zurück zum Zitat Aljuneidi T, Bulgak AA (2016) A mathematical model for designing reconfigurable cellular hybrid manufacturing-remanufacturing systems. Int J Adv Manuf Technol 87:1585–1596CrossRef Aljuneidi T, Bulgak AA (2016) A mathematical model for designing reconfigurable cellular hybrid manufacturing-remanufacturing systems. Int J Adv Manuf Technol 87:1585–1596CrossRef
55.
Zurück zum Zitat Galan R, Racero J, Eguia I, Canca D (2007) A methodology for facilitating reconfiguration in manufacturing: the move towards reconfigurable manufacturing systems. Int J Adv Manuf Technol 33:345–353CrossRef Galan R, Racero J, Eguia I, Canca D (2007) A methodology for facilitating reconfiguration in manufacturing: the move towards reconfigurable manufacturing systems. Int J Adv Manuf Technol 33:345–353CrossRef
56.
Zurück zum Zitat Singh RK, Khilwani N, Tiwari MK (2007) Justification for the selection of a reconfigurable manufacturing system: a fuzzy analytical hierarchy based approach. Int J Prod Res 45:3165–3190MATHCrossRef Singh RK, Khilwani N, Tiwari MK (2007) Justification for the selection of a reconfigurable manufacturing system: a fuzzy analytical hierarchy based approach. Int J Prod Res 45:3165–3190MATHCrossRef
57.
Zurück zum Zitat Li A, Lv C, Xu L (2007) Analysis and research of system configuration and economic evaluation of reconfigurable manufacturing system. 2007 IEEE Int Conf Robot Biomimetics, ROBIO, pp 1727–1732 Li A, Lv C, Xu L (2007) Analysis and research of system configuration and economic evaluation of reconfigurable manufacturing system. 2007 IEEE Int Conf Robot Biomimetics, ROBIO, pp 1727–1732
58.
Zurück zum Zitat Spicer P, Carlo HJ (2007) Integrating reconfiguration cost into the design of multi-period scalable reconfigurable manufacturing systems. J Manuf Sci Eng 129:202CrossRef Spicer P, Carlo HJ (2007) Integrating reconfiguration cost into the design of multi-period scalable reconfigurable manufacturing systems. J Manuf Sci Eng 129:202CrossRef
59.
Zurück zum Zitat Dou JP, Dai X, Meng Z (2009) Precedence graph-oriented approach to optimise single-product flow-line configurations of reconfigurable manufacturing system. Int J Comput Integr Manuf 22:923–940CrossRef Dou JP, Dai X, Meng Z (2009) Precedence graph-oriented approach to optimise single-product flow-line configurations of reconfigurable manufacturing system. Int J Comput Integr Manuf 22:923–940CrossRef
60.
Zurück zum Zitat Bensmaine A, Dahane M, Benyoucef L (2013) A non dominated sorting genetic algorithm based approach for optimal machines selection in reconfigurable manufacturing environment. Comput Ind Eng 66:519–524CrossRef Bensmaine A, Dahane M, Benyoucef L (2013) A non dominated sorting genetic algorithm based approach for optimal machines selection in reconfigurable manufacturing environment. Comput Ind Eng 66:519–524CrossRef
61.
Zurück zum Zitat Benderbal HH, Dahane M, Benyoucef L (2015) A new robustness index for machines selection in reconfigurable manufacturing system. Proc 2015 Int Conf Ind Eng Syst Manag IEEE IESM, pp 1019–1026 Benderbal HH, Dahane M, Benyoucef L (2015) A new robustness index for machines selection in reconfigurable manufacturing system. Proc 2015 Int Conf Ind Eng Syst Manag IEEE IESM, pp 1019–1026
62.
Zurück zum Zitat Goyal KK, Jain PK, Jain M (2013) A novel methodology to measure the responsiveness of RMTs in reconfigurable manufacturing system. J Manuf Syst 32:724–730CrossRef Goyal KK, Jain PK, Jain M (2013) A novel methodology to measure the responsiveness of RMTs in reconfigurable manufacturing system. J Manuf Syst 32:724–730CrossRef
63.
Zurück zum Zitat Molina A, Rodriguez CA, Ahuett H et al (2005) Next-generation manufacturing systems: key research issues in developing and integrating reconfigurable and intelligent machines. Int J Comput Integr Manuf 18:525–536CrossRef Molina A, Rodriguez CA, Ahuett H et al (2005) Next-generation manufacturing systems: key research issues in developing and integrating reconfigurable and intelligent machines. Int J Comput Integr Manuf 18:525–536CrossRef
64.
Zurück zum Zitat Goyal KK, Jain PK, Jain M (2012) Optimal configuration selection for reconfigurable manufacturing system using NSGA II and TOPSIS. Int J Prod Res 50:4175–4191CrossRef Goyal KK, Jain PK, Jain M (2012) Optimal configuration selection for reconfigurable manufacturing system using NSGA II and TOPSIS. Int J Prod Res 50:4175–4191CrossRef
65.
Zurück zum Zitat Eguia I, Molina JC, Lozano S, Racero J (2017) Cell design and multi-period machine loading in cellular reconfigurable manufacturing systems with alternative routing. Int J Prod Res 55:2775–2790CrossRef Eguia I, Molina JC, Lozano S, Racero J (2017) Cell design and multi-period machine loading in cellular reconfigurable manufacturing systems with alternative routing. Int J Prod Res 55:2775–2790CrossRef
66.
Zurück zum Zitat Xiaobo Z, Jiancai W, Zhenbi L (2000) A stochastic model of a reconfigurable manufacturing system part 2: optimal configurations. Int J Prod Res 38:747–758MATH Xiaobo Z, Jiancai W, Zhenbi L (2000) A stochastic model of a reconfigurable manufacturing system part 2: optimal configurations. Int J Prod Res 38:747–758MATH
67.
Zurück zum Zitat Cedeno-Campos VM, Trodden PA, Dodd TJ, Heley J (2013) Highly flexible self-reconfigurable systems for rapid layout formation to offer manufacturing services. In: IEEE International Conference on Systems, Man, and Cybernetics, pp 4819–4824 Cedeno-Campos VM, Trodden PA, Dodd TJ, Heley J (2013) Highly flexible self-reconfigurable systems for rapid layout formation to offer manufacturing services. In: IEEE International Conference on Systems, Man, and Cybernetics, pp 4819–4824
68.
Zurück zum Zitat Zheng L, Zhu L, Wang B, Bai L (2013) A simulation analysis of facility layout problems in reconfigurable manufacturing systems. In: International Conference on Computer Sciences and Applications. pp 423–427 Zheng L, Zhu L, Wang B, Bai L (2013) A simulation analysis of facility layout problems in reconfigurable manufacturing systems. In: International Conference on Computer Sciences and Applications. pp 423–427
69.
Zurück zum Zitat Kuo C-H (2001) Resource allocation and performance evaluation of the reconfigurable manufacturing systems. In: International Conference on Systems, Man and Cybernetics, pp 2451–2456 Kuo C-H (2001) Resource allocation and performance evaluation of the reconfigurable manufacturing systems. In: International Conference on Systems, Man and Cybernetics, pp 2451–2456
70.
Zurück zum Zitat Azevedo MM, Crispim JA, Sousa JP (2013) Flexible and reconfigurable layouts in complex manufacturing systems. IFIP AICT 397:484–493 Azevedo MM, Crispim JA, Sousa JP (2013) Flexible and reconfigurable layouts in complex manufacturing systems. IFIP AICT 397:484–493
71.
Zurück zum Zitat Azevedo MM, Crispim JA, Sousa JP (2016) Layout design and reconfiguration in a collaborative manufacturing network. In: IFIP AICT. Springer, Cham, pp 545–556 Azevedo MM, Crispim JA, Sousa JP (2016) Layout design and reconfiguration in a collaborative manufacturing network. In: IFIP AICT. Springer, Cham, pp 545–556
72.
Zurück zum Zitat Azevedo MM, Crispim JA, Sousa JP (2017) A dynamic multi-objective approach for the reconfigurable multi-facility layout problem. J Manuf Syst 42:140–152CrossRef Azevedo MM, Crispim JA, Sousa JP (2017) A dynamic multi-objective approach for the reconfigurable multi-facility layout problem. J Manuf Syst 42:140–152CrossRef
73.
Zurück zum Zitat Purnomo MRA, Wiwoho YS (2016) Multi-objective mixed integer programming approach for facility layout design by considering closeness ratings, material handling, and re-layout cost. IOP Conf Ser Mater Sci Eng 105:012045CrossRef Purnomo MRA, Wiwoho YS (2016) Multi-objective mixed integer programming approach for facility layout design by considering closeness ratings, material handling, and re-layout cost. IOP Conf Ser Mater Sci Eng 105:012045CrossRef
74.
Zurück zum Zitat Guan X, Dai X, Qiu B, Li J (2012) A revised electromagnetism-like mechanism for layout design of reconfigurable manufacturing system. Comput Ind Eng 63:98–108CrossRef Guan X, Dai X, Qiu B, Li J (2012) A revised electromagnetism-like mechanism for layout design of reconfigurable manufacturing system. Comput Ind Eng 63:98–108CrossRef
75.
Zurück zum Zitat Bejlegaard M, Brunoe TD, Nielsen K, Bossen J (2015) Machine-part formation enabling reconfigurable manufacturing systems configuration design: line balancing problem for low volume and high variety. In: Managing Complexity : Proceedings of the 8th World Conference on Mass Customization, Personalization, and Co-Creation (MCPC 2015), pp 139–146 Bejlegaard M, Brunoe TD, Nielsen K, Bossen J (2015) Machine-part formation enabling reconfigurable manufacturing systems configuration design: line balancing problem for low volume and high variety. In: Managing Complexity : Proceedings of the 8th World Conference on Mass Customization, Personalization, and Co-Creation (MCPC 2015), pp 139–146
76.
Zurück zum Zitat Ren C, Barlotti C, Cohen Y et al (2015) Re-layout of an assembly area: a case study at Bosch Rexroth oil control. Assem Autom 35:94–103CrossRef Ren C, Barlotti C, Cohen Y et al (2015) Re-layout of an assembly area: a case study at Bosch Rexroth oil control. Assem Autom 35:94–103CrossRef
77.
Zurück zum Zitat Vitayasak S, Pongcharoen P (2015) Re-layout and robust machine layout design under stochastic demand. Appl Mech Mater 789–790:1252–1257CrossRef Vitayasak S, Pongcharoen P (2015) Re-layout and robust machine layout design under stochastic demand. Appl Mech Mater 789–790:1252–1257CrossRef
78.
Zurück zum Zitat Lacksonen TA, Chao-Yen H (1998) Project scheduling algorithms for re-layout projects. IIE Trans 30:91–99CrossRef Lacksonen TA, Chao-Yen H (1998) Project scheduling algorithms for re-layout projects. IIE Trans 30:91–99CrossRef
79.
Zurück zum Zitat Ferrari E, Pareschi A, Persona A, Regattieri A (2003) Plant layout computerised design: logistic and relayout program (LRP). Int J Adv Manuf Technol 21:917–922CrossRef Ferrari E, Pareschi A, Persona A, Regattieri A (2003) Plant layout computerised design: logistic and relayout program (LRP). Int J Adv Manuf Technol 21:917–922CrossRef
80.
Zurück zum Zitat Keshavarzmanesh S, Wang L, Feng H-Y (2010) A hybrid approach for dynamic routing planning in an automated assembly shop. Robot Comput Integr Manuf 26:768–777CrossRef Keshavarzmanesh S, Wang L, Feng H-Y (2010) A hybrid approach for dynamic routing planning in an automated assembly shop. Robot Comput Integr Manuf 26:768–777CrossRef
81.
Zurück zum Zitat Maniraj M, Pakkirisamy V, Jeyapaul R (2017) An ant colony optimization-based approach for a single-product flow-line reconfigurable manufacturing systems. Proc Inst Mech Eng B J Eng Manuf 231:1229–1236CrossRef Maniraj M, Pakkirisamy V, Jeyapaul R (2017) An ant colony optimization-based approach for a single-product flow-line reconfigurable manufacturing systems. Proc Inst Mech Eng B J Eng Manuf 231:1229–1236CrossRef
82.
Zurück zum Zitat Dou J, Dai X, Ma X, Meng Z (2008) A GA-based approach to optimize single-product flow-line configurations of RMS. In: Proceedings of 2008 IEEE International Conference on Mechatronics and Automation, pp 654–659 Dou J, Dai X, Ma X, Meng Z (2008) A GA-based approach to optimize single-product flow-line configurations of RMS. In: Proceedings of 2008 IEEE International Conference on Mechatronics and Automation, pp 654–659
83.
Zurück zum Zitat Kant R, Pandey V, Pattanaik LN (2017) An NSGA II-based approach for optimization of reconfigurable cellular manufacturing system. In: Advances in intelligent systems and computing. Springer, Singapore, pp 57–66 Kant R, Pandey V, Pattanaik LN (2017) An NSGA II-based approach for optimization of reconfigurable cellular manufacturing system. In: Advances in intelligent systems and computing. Springer, Singapore, pp 57–66
84.
Zurück zum Zitat Qiu RG, Mcdonnell P, Joshi S, Russell DW (2005) A heuristic game theoretic approach to resource sharing in reconfigurable manufacturing. Int J Adv Manuf Technol 25:78–87CrossRef Qiu RG, Mcdonnell P, Joshi S, Russell DW (2005) A heuristic game theoretic approach to resource sharing in reconfigurable manufacturing. Int J Adv Manuf Technol 25:78–87CrossRef
85.
Zurück zum Zitat Fan S, Li J, Catherine A, Pan M (2011) GASD based relayout method in mass customization manufacturing quality assurance. Adv Mater Res 225–226:368–371 Fan S, Li J, Catherine A, Pan M (2011) GASD based relayout method in mass customization manufacturing quality assurance. Adv Mater Res 225–226:368–371
86.
Zurück zum Zitat Wang G, Yan Y, Zhang X, et al (2008) A simulation optimization approach for facility layout problem. In: International Conference on Industrial Engineering and Engineering Management, pp 734–738 Wang G, Yan Y, Zhang X, et al (2008) A simulation optimization approach for facility layout problem. In: International Conference on Industrial Engineering and Engineering Management, pp 734–738
87.
Zurück zum Zitat Jiang S, Ong SK, Nee AYC (2014) An AR-based hybrid approach for facility layout planning and evaluation for existing shop floors. Int J Adv Manuf Technol 72:457–473CrossRef Jiang S, Ong SK, Nee AYC (2014) An AR-based hybrid approach for facility layout planning and evaluation for existing shop floors. Int J Adv Manuf Technol 72:457–473CrossRef
88.
Zurück zum Zitat Yamada Y, Lei J (2006) Reconfiguration process design of a reconfigurable manufacturing system. IMACS Multiconference Computational Eng Syst Appl 1012–1019 Yamada Y, Lei J (2006) Reconfiguration process design of a reconfigurable manufacturing system. IMACS Multiconference Computational Eng Syst Appl 1012–1019
89.
Zurück zum Zitat Yamada Y (2006) Dynamic reconfiguration of reconfigurable manufacturing systems using particle swarm optimization. In: International Conference on Robotics and Automation, pp 1444–1449 Yamada Y (2006) Dynamic reconfiguration of reconfigurable manufacturing systems using particle swarm optimization. In: International Conference on Robotics and Automation, pp 1444–1449
90.
Zurück zum Zitat Kia R, Baboli A, Javadian N et al (2012) Solving a group layout design model of a dynamic cellular manufacturing system with alternative process routings, lot splitting and flexible reconfiguration by simulated annealing. Comput Oper Res 39:2642–2658MathSciNetMATHCrossRef Kia R, Baboli A, Javadian N et al (2012) Solving a group layout design model of a dynamic cellular manufacturing system with alternative process routings, lot splitting and flexible reconfiguration by simulated annealing. Comput Oper Res 39:2642–2658MathSciNetMATHCrossRef
91.
Zurück zum Zitat Kia R, Javadian N, Paydar MM, Saidi-Mehrabad M (2013) A simulated annealing for intra-cell layout design of dynamic cellular manufacturing systems with route selection, purchasing machines and cell reconfiguration. Asia Pacific J Oper Res 30:1350004MathSciNetMATHCrossRef Kia R, Javadian N, Paydar MM, Saidi-Mehrabad M (2013) A simulated annealing for intra-cell layout design of dynamic cellular manufacturing systems with route selection, purchasing machines and cell reconfiguration. Asia Pacific J Oper Res 30:1350004MathSciNetMATHCrossRef
92.
Zurück zum Zitat Shafigh F, Defersha FM, Moussa SE (2017) A linear programming embedded simulated annealing in the design of distributed layout with production planning and systems reconfiguration. Int J Adv Manuf Technol 88:1119–1140CrossRef Shafigh F, Defersha FM, Moussa SE (2017) A linear programming embedded simulated annealing in the design of distributed layout with production planning and systems reconfiguration. Int J Adv Manuf Technol 88:1119–1140CrossRef
93.
Zurück zum Zitat Kulturel-Konak S, Smith AE, Norman BA (2007) Bi-objective facility expansion and relayout considering monuments. IIE Trans 39:747–761CrossRef Kulturel-Konak S, Smith AE, Norman BA (2007) Bi-objective facility expansion and relayout considering monuments. IIE Trans 39:747–761CrossRef
94.
Zurück zum Zitat Giordani S, Lujak M, Martinelli F (2009) A decentralized scheduling policy for a dynamically reconfigurable production system. In: Lecture notes in computer science (including subseries lecture notes in artificial intelligence and lecture notes in bioinformatics). Springer, Berlin Heidelberg, pp 102–113 Giordani S, Lujak M, Martinelli F (2009) A decentralized scheduling policy for a dynamically reconfigurable production system. In: Lecture notes in computer science (including subseries lecture notes in artificial intelligence and lecture notes in bioinformatics). Springer, Berlin Heidelberg, pp 102–113
95.
Zurück zum Zitat Leitao P, Barbosa J, Trentesaux D (2012) Bio-inspired multi-agent systems for reconfigurable manufacturing systems. Eng Appl Artif Intell 25:934–944CrossRef Leitao P, Barbosa J, Trentesaux D (2012) Bio-inspired multi-agent systems for reconfigurable manufacturing systems. Eng Appl Artif Intell 25:934–944CrossRef
96.
Zurück zum Zitat Hsieh FS (2018) Design of scalable agent-based reconfigurable manufacturing systems with Petri nets. Int J Comput Integr Manuf 31:748–759CrossRef Hsieh FS (2018) Design of scalable agent-based reconfigurable manufacturing systems with Petri nets. Int J Comput Integr Manuf 31:748–759CrossRef
97.
Zurück zum Zitat AlGeddawy T, ElMaraghy HA (2010) Design of single assembly line for the delayed differentiation of product variants. Flex Serv Manuf J 22:163–182MATHCrossRef AlGeddawy T, ElMaraghy HA (2010) Design of single assembly line for the delayed differentiation of product variants. Flex Serv Manuf J 22:163–182MATHCrossRef
98.
Zurück zum Zitat AlGeddawy T, ElMaraghy HA (2010) Assembly systems layout design model for delayed products differentiation. Int J Prod Res 48:5281–5305MATHCrossRef AlGeddawy T, ElMaraghy HA (2010) Assembly systems layout design model for delayed products differentiation. Int J Prod Res 48:5281–5305MATHCrossRef
99.
Zurück zum Zitat Wu ZJ, Ning RX (2006) Design and application of virtual reconfigurable manufacturing system. In: Proceedings of the 13th International Conference on Industrial Engineering and Engineering Management, pp 763–767 Wu ZJ, Ning RX (2006) Design and application of virtual reconfigurable manufacturing system. In: Proceedings of the 13th International Conference on Industrial Engineering and Engineering Management, pp 763–767
100.
Zurück zum Zitat Ming D, Fei L, Forest H et al (2007) Multi-objective layout optimization in dynamic environments: a heuristic approach. Int Conf Manag 05:159–164 Ming D, Fei L, Forest H et al (2007) Multi-objective layout optimization in dynamic environments: a heuristic approach. Int Conf Manag 05:159–164
101.
Zurück zum Zitat Lin HW, Murata T (2010) Decision support for the dynamic reconfiguration of machine layout and part routing in cellular manufacturing. In: Proceedings of the International MultiConference of Engineers and Computer Scientists 2010, IMECS 2010 Lin HW, Murata T (2010) Decision support for the dynamic reconfiguration of machine layout and part routing in cellular manufacturing. In: Proceedings of the International MultiConference of Engineers and Computer Scientists 2010, IMECS 2010
102.
Zurück zum Zitat Lv C, Li AP, Xu LY (2010) Research and optimization of reconfigurable manufacturing system configuration based on system reliability. Kybernetes 39:1058–1065MATHCrossRef Lv C, Li AP, Xu LY (2010) Research and optimization of reconfigurable manufacturing system configuration based on system reliability. Kybernetes 39:1058–1065MATHCrossRef
103.
Zurück zum Zitat Abdi MR, Labib AW (2004) Feasibility study of the tactical design justification for reconfigurable manufacturing systems using the fuzzy analytical hierarchical process. Int J Prod Res 42:3055–3076MATHCrossRef Abdi MR, Labib AW (2004) Feasibility study of the tactical design justification for reconfigurable manufacturing systems using the fuzzy analytical hierarchical process. Int J Prod Res 42:3055–3076MATHCrossRef
104.
Zurück zum Zitat Al-Zaher A, Elmaraghy W, Pasek ZJ (2013) RMS design methodology for automotive framing systems BIW. J Manuf Syst 32:436–448CrossRef Al-Zaher A, Elmaraghy W, Pasek ZJ (2013) RMS design methodology for automotive framing systems BIW. J Manuf Syst 32:436–448CrossRef
105.
Zurück zum Zitat Izquierdo LE, Hu SJ, Du H et al (2009) Robust fixture layout design for a product family assembled in a multistage reconfigurable line. J Manuf Sci Eng 131:041008CrossRef Izquierdo LE, Hu SJ, Du H et al (2009) Robust fixture layout design for a product family assembled in a multistage reconfigurable line. J Manuf Sci Eng 131:041008CrossRef
106.
Zurück zum Zitat Jefferson TG, Benardos P, Ratchev S (2016) Reconfigurable assembly system design methodology: a wing assembly case study. Int J Mater Manuf 9:31–48CrossRef Jefferson TG, Benardos P, Ratchev S (2016) Reconfigurable assembly system design methodology: a wing assembly case study. Int J Mater Manuf 9:31–48CrossRef
107.
Zurück zum Zitat Kamrani AK (2003) A template-based engineering methodology for integrated product design and reconfigurable manufacturing layout. Int J Ind Eng Theory Appl Pract 10:147–156 Kamrani AK (2003) A template-based engineering methodology for integrated product design and reconfigurable manufacturing layout. Int J Ind Eng Theory Appl Pract 10:147–156
108.
Zurück zum Zitat Kochhar JS, Heragu SS (1999) Facility layout design in a changing environment. Int J Prod Res 37:2429–2446MATHCrossRef Kochhar JS, Heragu SS (1999) Facility layout design in a changing environment. Int J Prod Res 37:2429–2446MATHCrossRef
109.
Zurück zum Zitat Li J, Dai X, Meng Z et al (2009) Rapid design and reconfiguration of Petri net models for reconfigurable manufacturing cells with improved net rewriting systems and activity diagrams. Comput Ind Eng 57:1431–1451CrossRef Li J, Dai X, Meng Z et al (2009) Rapid design and reconfiguration of Petri net models for reconfigurable manufacturing cells with improved net rewriting systems and activity diagrams. Comput Ind Eng 57:1431–1451CrossRef
110.
Zurück zum Zitat Moghaddam SK, Houshmand M, Valilai OF (2018) Configuration design in scalable reconfigurable manufacturing systems (RMS); a case of single-product flow line (SPFL). Int J Prod Res 56:3932–3954CrossRef Moghaddam SK, Houshmand M, Valilai OF (2018) Configuration design in scalable reconfigurable manufacturing systems (RMS); a case of single-product flow line (SPFL). Int J Prod Res 56:3932–3954CrossRef
111.
Zurück zum Zitat Unglert J, Becker JJ, Hoekstra S (2016) Computational design synthesis of reconfigurable cellular manufacturing systems: a design engineering model. Procedia CIRP 57:374–379CrossRef Unglert J, Becker JJ, Hoekstra S (2016) Computational design synthesis of reconfigurable cellular manufacturing systems: a design engineering model. Procedia CIRP 57:374–379CrossRef
112.
Zurück zum Zitat Unglert J, Hoekstra S, Becker JJ, van Houten F (2016) Towards decision-support for reconfigurable manufacturing systems based on computational design synthesis. Procedia CIRP 41:153–158CrossRef Unglert J, Hoekstra S, Becker JJ, van Houten F (2016) Towards decision-support for reconfigurable manufacturing systems based on computational design synthesis. Procedia CIRP 41:153–158CrossRef
113.
Zurück zum Zitat Unglert J, Hoekstra S, Becker JJ (2016) Supporting the design of reconfigurable cellular manufacturing systems by computational design synthesis. In: DS 84: Proceedings of the DESIGN 2016 14th International Design Conference, pp 1417–1426 Unglert J, Hoekstra S, Becker JJ (2016) Supporting the design of reconfigurable cellular manufacturing systems by computational design synthesis. In: DS 84: Proceedings of the DESIGN 2016 14th International Design Conference, pp 1417–1426
114.
Zurück zum Zitat Zhang S, Li Y, Bilberg A, Hadar R (2014) Design and evaluation of a reconfigurable manufacturing system. In: Lecture Notes in Production Engineering: Twenty Years of Mass Customization – Towards New Frontiers, pp 115–127 Zhang S, Li Y, Bilberg A, Hadar R (2014) Design and evaluation of a reconfigurable manufacturing system. In: Lecture Notes in Production Engineering: Twenty Years of Mass Customization – Towards New Frontiers, pp 115–127
115.
Zurück zum Zitat Benama Y, Alix T, Perry N (2014) Reconfigurable manufacturing system design: the case of mobile manufacturing system. In: Advances in Production Management Systems (Ajaccio; 2014), pp 1–8 Benama Y, Alix T, Perry N (2014) Reconfigurable manufacturing system design: the case of mobile manufacturing system. In: Advances in Production Management Systems (Ajaccio; 2014), pp 1–8
116.
Zurück zum Zitat Dou J, Dai X, Meng Z (2007) Optimization for flow-line configurations of RMS based on graph theory. Proc 2007 IEEE Int Conf Mechatronics Autom ICMA 2007 1261–1266 Dou J, Dai X, Meng Z (2007) Optimization for flow-line configurations of RMS based on graph theory. Proc 2007 IEEE Int Conf Mechatronics Autom ICMA 2007 1261–1266
117.
Zurück zum Zitat Farid AM (2013) An axiomatic design approach to production path enumeration in reconfigurable manufacturing systems. 2013 IEEE Int Conf Syst Man, Cybern, pp 3862–3869 Farid AM (2013) An axiomatic design approach to production path enumeration in reconfigurable manufacturing systems. 2013 IEEE Int Conf Syst Man, Cybern, pp 3862–3869
118.
Zurück zum Zitat Guerra-Zubiaga D, Rosas R, Camacho R, Molina A (2005) Information models to support reconfigurable manufacturing system design. In: Bouras A, Gurumoorthy B, Sudarsan R (eds) Product lifecycle management: emerging solutions and challenges for global networked enterprises. Inderscience Enterprises Limited, Genève, pp 55–63 Guerra-Zubiaga D, Rosas R, Camacho R, Molina A (2005) Information models to support reconfigurable manufacturing system design. In: Bouras A, Gurumoorthy B, Sudarsan R (eds) Product lifecycle management: emerging solutions and challenges for global networked enterprises. Inderscience Enterprises Limited, Genève, pp 55–63
119.
Zurück zum Zitat Huang L, Gao Y, Qian F et al (2010) Configuration selection for reconfigurable manufacturing systems by means of characteristic state space. Chinese J Mech Eng 23:1–10CrossRef Huang L, Gao Y, Qian F et al (2010) Configuration selection for reconfigurable manufacturing systems by means of characteristic state space. Chinese J Mech Eng 23:1–10CrossRef
120.
Zurück zum Zitat Kahloul L, Bourekkache S, Djouani K (2016) Designing reconfigurable manufacturing systems using reconfigurable object Petri nets. Int J Comput Integr Manuf 29:889–906CrossRef Kahloul L, Bourekkache S, Djouani K (2016) Designing reconfigurable manufacturing systems using reconfigurable object Petri nets. Int J Comput Integr Manuf 29:889–906CrossRef
121.
Zurück zum Zitat Lamotte FF, Berruet P, Philippe JL (2006) Evaluation of reconfigurable manufacturing systems configurations using tolerance criteria. IECON Proc Industrial Electron Conf pp 3715–3720 Lamotte FF, Berruet P, Philippe JL (2006) Evaluation of reconfigurable manufacturing systems configurations using tolerance criteria. IECON Proc Industrial Electron Conf pp 3715–3720
122.
Zurück zum Zitat Chao L, Aiping L, Liyun X (2007) The research of performance evaluation system on manufacturing system with reconfigurable configuration. Proc 2007 IEEE Int Conf Mechatronics Autom ICMA 2007 pp 1005–1010 Chao L, Aiping L, Liyun X (2007) The research of performance evaluation system on manufacturing system with reconfigurable configuration. Proc 2007 IEEE Int Conf Mechatronics Autom ICMA 2007 pp 1005–1010
123.
Zurück zum Zitat Orozco OJL, Lastra JLM (2007) Analysis and design of a distributed model of coordination control for reconfigurable manufacturing systems. In: Proceedings of the 13th IASTED International Conference on Robotics and Applications, pp 537–542 Orozco OJL, Lastra JLM (2007) Analysis and design of a distributed model of coordination control for reconfigurable manufacturing systems. In: Proceedings of the 13th IASTED International Conference on Robotics and Applications, pp 537–542
124.
Zurück zum Zitat Tang Y, Qiu RG (2004) Integrated design approach for virtual production line-based reconfigurable manufacturing systems. Int J Prod Res 42:3803–3822MATHCrossRef Tang Y, Qiu RG (2004) Integrated design approach for virtual production line-based reconfigurable manufacturing systems. Int J Prod Res 42:3803–3822MATHCrossRef
125.
Zurück zum Zitat Wang Q, Lassalle S, Mileham AR, Owen GW (2009) Analysis of a linear walking worker line using a combination of computer simulation and mathematical modeling approaches. J Manuf Syst 28:64–70CrossRef Wang Q, Lassalle S, Mileham AR, Owen GW (2009) Analysis of a linear walking worker line using a combination of computer simulation and mathematical modeling approaches. J Manuf Syst 28:64–70CrossRef
126.
Zurück zum Zitat Baqai A, Shafiq A (2013) Dimensional analysis of the generated design solutions for reconfigurable manufacturing system. Int Mech Eng Congr Expo IMECE pp 1–7 Baqai A, Shafiq A (2013) Dimensional analysis of the generated design solutions for reconfigurable manufacturing system. Int Mech Eng Congr Expo IMECE pp 1–7
127.
Zurück zum Zitat Schmidt KW (2013) Optimal configuration changes for reconfigurable manufacturing systems. 52nd IEEE Conf Decis Control 16:7621–7626 Schmidt KW (2013) Optimal configuration changes for reconfigurable manufacturing systems. 52nd IEEE Conf Decis Control 16:7621–7626
128.
Zurück zum Zitat Yamada Y, Ookoudo K, Komura Y (2003) Layout optimization of manufacturing cells and allocation optimization of transport robots in reconfigurable manufacturing systems using particle swarm optimization. Proc 2003 IEEE/RSJ Int Conf Intell Robot Syst 2:2049–2054 Yamada Y, Ookoudo K, Komura Y (2003) Layout optimization of manufacturing cells and allocation optimization of transport robots in reconfigurable manufacturing systems using particle swarm optimization. Proc 2003 IEEE/RSJ Int Conf Intell Robot Syst 2:2049–2054
129.
Zurück zum Zitat Zheng P, Wang H, Sang Z et al (2018) Smart manufacturing systems for industry 4.0: conceptual framework, scenarios, and future perspectives. Front Mech Eng 13:137–150CrossRef Zheng P, Wang H, Sang Z et al (2018) Smart manufacturing systems for industry 4.0: conceptual framework, scenarios, and future perspectives. Front Mech Eng 13:137–150CrossRef
130.
Zurück zum Zitat Scholz S, Mueller T, Plasch M, Limbeck H, Adamietz R, Iseringhausen T, Kimmig D, Dickerhof M, Woegerer C (2016) A modular flexible scalable and reconfigurable system for manufacturing of microsystems based on additive manufacturing and e-printing. Robot Comput Integr Manuf 40:14–23CrossRef Scholz S, Mueller T, Plasch M, Limbeck H, Adamietz R, Iseringhausen T, Kimmig D, Dickerhof M, Woegerer C (2016) A modular flexible scalable and reconfigurable system for manufacturing of microsystems based on additive manufacturing and e-printing. Robot Comput Integr Manuf 40:14–23CrossRef
131.
Zurück zum Zitat Wang L (2011) Combining facility layout redesign and dynamic routing for job-shop assembly operations. In: International Symposium on Assembly and Manufacturing, ISAM 2011, pp 1–6 Wang L (2011) Combining facility layout redesign and dynamic routing for job-shop assembly operations. In: International Symposium on Assembly and Manufacturing, ISAM 2011, pp 1–6
132.
Zurück zum Zitat Singh A, Gupta S, Asjad M, Gupta P (2017) Reconfigurable manufacturing systems: journey and the road ahead. Int J Syst Assur Eng Manag 8:1849–1857CrossRef Singh A, Gupta S, Asjad M, Gupta P (2017) Reconfigurable manufacturing systems: journey and the road ahead. Int J Syst Assur Eng Manag 8:1849–1857CrossRef
133.
Zurück zum Zitat Maganha I, Silva C, Ferreira LMDF (2018) Understanding reconfigurability of manufacturing systems: an empirical analysis. J Manuf Syst 48:120–130CrossRef Maganha I, Silva C, Ferreira LMDF (2018) Understanding reconfigurability of manufacturing systems: an empirical analysis. J Manuf Syst 48:120–130CrossRef
134.
Zurück zum Zitat Bortolini M, Galizia FG, Mora C (2018) Reconfigurable manufacturing systems: literature review and research trend. J Manuf Syst 49:93–106CrossRef Bortolini M, Galizia FG, Mora C (2018) Reconfigurable manufacturing systems: literature review and research trend. J Manuf Syst 49:93–106CrossRef
Metadaten
Titel
The layout design in reconfigurable manufacturing systems: a literature review
verfasst von
Isabela Maganha
Cristovao Silva
Luis Miguel D. F. Ferreira
Publikationsdatum
13.08.2019
Verlag
Springer London
Erschienen in
The International Journal of Advanced Manufacturing Technology / Ausgabe 1-4/2019
Print ISSN: 0268-3768
Elektronische ISSN: 1433-3015
DOI
https://doi.org/10.1007/s00170-019-04190-3

Weitere Artikel der Ausgabe 1-4/2019

The International Journal of Advanced Manufacturing Technology 1-4/2019 Zur Ausgabe

    Marktübersichten

    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.