nach oben

Measurement Techniques

Erschienen in:

01.06.2015

The Use of Optical Methods of Measurement to Investigate the Composition of New Aviation Materials

Erschienen in: Measurement Techniques | Ausgabe 3/2015

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

A procedure for the microwave sample preparation of nickel alloys to determine the mass fractions of Al, Ti, Cr, Co, Nb, Mo, Ru, Ta, W, and Re by atomic-emission spectrometry with an inductively coupled plasma is described. The compositions of the mixtures for solution and the parameters of the microwave dispersion are chosen. The limits of the relative error in measuring the mass fraction of the elements from 0.1% to 20% do not exceed 4% (P = 0.95).

Vorheriger Artikel A Hardware-Software System for Monitoring the Content of Atmospheric Impurities

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

A. A. Papyshev and D. A. Danilova, “The use of atomic-emission spectrometry with an inductively coupled plasma to analyze materials and products of ferrous metallurgy,” Analit. Kontrol, 11, No. 2–3, 131–181 (2007).

E. A. Tormysheva, E. V. Smirnova, and T. N. Ermolaeva, “Microwave sample preparation of fused materials for analysis by atomic-emission spectroscopy with an inductively coupled plasma,” Zavod. Lab. Diagn. Mater., 76, No. 10, 10–13 (2010).

E. N. Kablov, G. A. Morozov, V. N. Krutikov, and N. P. Muravskaya, “Certification of standard samples of a compound of multiply-doped alloys using a standard,” Aviats. Mater. Tekhnol., No. 2, 9–11 (2012).

A. F. Letov, F. N. Karachevtsev, N. V. Gundobin and V. I. Titov, “The development of standard samples of a compound of alloys for aviation purposes,” Aviats. Mater. Tekhnol., No. 5, 393–398 (2012).

B. S. Lomberg, M. M. Bakradze, E. B. Chabina, and E. V. Filonova, “The relation between the structure and properties of highly heat-resisting nickel alloys for the disks of gas turbine engines,” Aviats. Mater. Tekhnol., No. 2, 25–30 (2011).

E. B. Chabina, E. V. Filonova, B. S. Lomberg, and M. M. Bakradze, “The structure of modern deformable nickel alloys,” All Materials: Encyclopedic Handbooh (2012), Vol. 6, pp. 22–27.

N. V. Petrushin, E. S. Elyutin, E. B. Chabina, and O. B. Timofeeva, “Phase and structural transitions in heat resistant rhenium-containing alloys of single-crystal structure,” Lit. Proizv., No. 7, 1–7 (2008).

N. V. Petrushin, I. L. Svetlov, A. P. Samoilov, et al., “High-temperature phase and structural transitions in single crystals of heat-resistant nickel-alloy, containing rhenium and ruthenium,” Materialovedenie, No. 11, 26–31 (2008).

E. N. Kablov, N. V. Petrushin, I. L. Svetlov, and I. H. Demonis, “Nickel lithium heat-resistant alloys of a new generation,” Aviats. Mater. Tekhnol., No. 5, 36–52 (2012).

10.

B. S. Lomberg, S. V. Ovsepyan, M. M. Bakradze, and I. S. Mazalov, “High-temperature heat-resistant nickel alloys for the components of gas turbine engines,” ibid., 52–57.

11.

B. S. Lomberg, S. V. Ovsepyan, and M. M. Bakradze, “Features of the doping and heat treatment of heat-resistant nickel alloys for the disks of a new generation of gas turbine engines,” Aviats. Mater. Tekhnol., No. 2, 3–8 (2010).

12.

B. S. Lomberg, S. V. Ovsepyan, and M. M. Bakradze, “A new heat-resistant nickel alloy for the disks of gas turbine engines and gas turbine equipment,” Materialovedenie, No. 7, 24–28 (2010).

13.

J. L. Todoli, L. Gras, V. Hernandis, and J. Mora, “Elemental matrix effects in ICP-AES,” J. Anal. At. Spectrom., No. 17, 142–169 (2002).

14.

GOST R ISO12284–2009, Steel and Cast Iron. Selection and Preparation of Samples for Determining the Chemical Composition.

15.

GOST 8.563–2009, GSI. Measurement Procedures (Methods).

Titel: The Use of Optical Methods of Measurement to Investigate the Composition of New Aviation Materials
Publikationsdatum: 01.06.2015
Erschienen in: Measurement Techniques / Ausgabe 3/2015
Print ISSN: 0543-1972
Elektronische ISSN: 1573-8906
DOI: https://doi.org/10.1007/s11018-015-0717-z

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 3/2015

Optimization of Measurements of the Geometry of Parts with Complex Surfaces

The Calibration of a Water Vapor Radiometer

A Method of Estimating the Components of the Error in Measurement of the Linear Dimensions of Objects in Automatic Systems of Computer Microscopy

Development of Methods of Realization and Dissemination of the Units of Spectroradiometry with the Use of Synchrotron Radiation

Updating the Secondary Standard for the Unit of Low Absolute Pressure VE-13–13

Time Dynamics of the Radiation Spectrum of the DRGS-12 Mercury-Helium Lamp