nach oben

Metallurgical and Materials Transactions A

Erschienen in:

01.07.2020

Thermodynamic Stacking Fault Energy, Chemical Composition, and Microstructure Relationship in High-Manganese Steels

Erschienen in: Metallurgical and Materials Transactions A | Ausgabe 9/2020

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Stacking fault energy (SFE) is related to activating complex high strength and ductility mechanisms such as transformation-induced plasticity and twinning-induced plasticity effects. This type of energy can be estimated by many different methods and its importance is in its ability to predict microstructure and phase transformation behavior when the material is submitted to stress/strain. In order to study the SFE, chemical composition, and microstructure relationships, eleven different welding parameters were chosen to obtain a large range of dilution levels. A new tubular wire electrode of high-manganese steel (21 wt pct Mn) was used as the consumable and an SAE 1012 steel plate (0.6 wt pct Mn) as the base metal in a flux-cored arc welding process. These welding parameters were related to the phases formed and phase transformation behavior in the fusion zone. The SFE of the austenite phase was calculated using a thermodynamic model. The welding parameters produced SFE values in the range of − 5 to 7 mJ/m². \(\epsilon \)-martensite and austenite were observed in all samples, but \(\alpha \)′-martensite was only found in those that presented negative SFE values, i.e., those with lower Mn content. Chemical Gibbs Free energy was the component with the most influence on the SFE. Nanoindentation detected the phase transformations during hardness testing for the medium and low dilution levels used, while the high dilution levels presented the highest hardness and modulus of elasticity values, and the lowest elastic and plastic deformation values. The results provide an improved method to develop high-manganese steels with microstructure control through welding parameters.

Vorheriger Artikel Effect of a New High-Pressure Heat Treatment on Additively Manufactured AlSi10Mg Alloy

Nächster Artikel Thermodynamic Properties of Li-Sb Liquid Solution by QAM

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

W. Yan, L. Fang, K. Sun, Y. Xu, Effect of surface work hardening on wear behavior of Hadfield steel, Mater. Sci. Eng. A 460–461, 542 (2007). https://doi.org/10.1016/j.msea.2007.02.094.CrossRef

B.D. Shanina, V.G. Gavriljuk, H. Berns, F. Schmalt, Concept of a new high-strength austenitic stainless steel, Steel Res. 73(3), 105 (2002). https://doi.org/10.1002/srin.200200181.CrossRef

T.H. Lee, C.S. Oh, S.J. Kim, Effects of nitrogen on deformation-induced martensitic transformation in metastable austenitic Fe-18Cr-10Mn-N steels, Scripta Materialia 58(2), 110 (2008). https://doi.org/10.1016/j.scriptamat.2007.09.029.CrossRef

S. Lee, J. Kim, S.J. Lee, B.C. De Cooman, , Scripta Materialia 65(12), 1073 (2011). https://doi.org/10.1016/j.scriptamat.2011.09.019.CrossRef

O. Bouaziz, S. Allain, C. Scott, , Scripta Materialia 58(6), 484 (2008). https://doi.org/10.1016/j.scriptamat.2007.10.050.CrossRef

B. De Cooman: in Automotive Steels (Elsevier, 2017), pp. 317–85. https://doi.org/10.1016/B978-0-08-100638-2.00011-0

S. Curtze, V.T. Kuokkala, , Acta Materialia 58(15), 5129 (2010). https://doi.org/10.1016/j.actamat.2010.05.049.CrossRef

B.C. De Cooman, O. Kwon, K.G. Chin, , Mater. Sci. Technol. 28(5), 513 (2012). https://doi.org/10.1179/1743284711Y.0000000095.CrossRef

O. Bouaziz, S. Allain, C. Scott, P. Cugy, D. Barbier, , Curr. Opin. Solid State Mater. Sci. 15(4), 141 (2011). https://doi.org/10.1016/j.cossms.2011.04.002.CrossRef

10.

M. Toloui, M. Militzer, , Acta Materialia 144, 786 (2018). https://doi.org/10.1016/j.actamat.2017.11.047.CrossRef

11.

C. Liu, Q. Peng, Z. Xue, S. Wang, C. Yang, , Materials 11(11), 2242 (2018). https://doi.org/10.3390/ma11112242.CrossRef

12.

Z.L. Li, D. Chen, J. Kang, G. Yuan, G.D. Wang, . Steel research international 89(5), 1700484 (2018). 10.1002/srin.201700484CrossRef

13.

R. Xiong, H. Peng, H. Si, W. Zhang, Y. Wen, , Materials Science and Engineering: A 598, 376 (2014). https://doi.org/10.1016/j.msea.2014.01.046.CrossRef

14.

S. Curtze, V.T. Kuokkala, A. Oikari, J. Talonen, H. Hänninen, , Acta Materialia 59(3), 1068 (2011). https://doi.org/10.1016/j.actamat.2010.10.037.CrossRef

15.

H.M. Otte, , Acta Metallurgica 5(11), 614 (1957). https://doi.org/10.1016/0001-6160(57)90108-6.CrossRef

16.

R.E. Smallman, K.H. Westmacott, , Philosophical Magazine 2(17), 669 (1957). https://doi.org/10.1080/14786435708242709.CrossRef

17.

P.J. Ferreira, P. Müllner, , Acta Mater. 46(13), 4479 (1998). https://doi.org/10.1016/S1359-6454(98)00155-4.CrossRef

18.

J.N. Israelachvili, D. Tabor, , Proceedings of the Royal Society of London 249(1256), 114 (1959). 10.1098/rspa.1959.0011CrossRef

19.

S. Zhao, G.M. Stocks, Y. Zhang, Stacking fault energies of face-centered cubic concentrated solid solution alloys, Acta Mater. 134, 334 (2017). DOI: https://doi.org/10.1016/j.actamat.2017.05.001.CrossRef

20.

R. Xie, W. Li, S. Lu, Y. Song, L. Vitos,. J. Phys. 31(6), 065703 (2019). https://doi.org/10.1088/1361-648X/aaf2faCrossRef

21.

S. Allain, J.P. Chateau, O. Bouaziz, S. Migot, N. Guelton, Correlations between the calculated stacking fault energy and the plasticity mechanisms in Fe-Mn-C alloys, Materials Science and Engineering A 387-389(1), 158 (2004). 10.1016/j.msea.2004.01.059CrossRef

22.

L. Remy, A. Pineau, Twinning and strain-induced, Materials Science and Engineering 28(1), 99 (1977). 10.1016/0025-5416(77)90093-3CrossRef

23.

T.H. Lee, E. Shin, C.S. Oh, H.Y. Ha, S.J. Kim, Correlation between stacking fault energy and deformation microstructure in high-interstitial-alloyed austenitic steels, Acta Mater. 58(8), 3173 (2010). DOI: https://doi.org/10.1016/j.actamat.2010.01.056.CrossRef

24.

T. Maki, Microstructure and Mechanical Behaviour of Ferrous Martensite, Materials Science Forum 56–58, 157 (1991). DOI: https://doi.org/10.4028/www.scientific.net/MSF.56-58.157.CrossRef

25.

J.K. Hwang, Deformation behaviors of various Fe-Mn-C twinning-induced plasticity steels: effect of stacking fault energy and chemical composition, Journal of Materials Science 55(4), 1779 (2020). DOI: https://doi.org/10.1007/s10853-019-04018-1.CrossRef

26.

D. Pierce, J. Jiménez, J. Bentley, D. Raabe, J. Wittig, The influence of stacking fault energy on the microstructural and strain-hardening evolution of Fe-Mn-Al-Si steels during tensile deformation, Acta Mater. 100, 178 (2015). DOI: https://doi.org/10.1016/j.actamat.2015.08.030.CrossRef

27.

G.B. Olson, M. Cohen, A general mechanism of martensitic nucleation: Part I General concepts and the FCC \(\rightarrow \) HCP transformation, Metall. Trans. A 7(12), 1897 (1976). 10.1007/BF02659822CrossRef

28.

K. Ishida, Direct estimation of stacking fault energy by thermodynamic analysis, Physica Status Solidi (a) 36(2), 717 (1976). DOI: https://doi.org/10.1002/pssa.2210360233.CrossRef

29.

A.T. Dinsdale, SGTE data for pure elements, Calphad 15(4), 317 (1991). DOI: https://doi.org/10.1016/0364-5916(91)90030-N.CrossRef

30.

O. Redlich, A.T. Kister, Algebraic Representation of Thermodynamic Properties and the Classification of Solutions, Industrial & Engineering Chemistry 40(2), 345 (1948). DOI: https://doi.org/10.1021/ie50458a036.CrossRef

31.

S. Cotes, M. Sade, A.F. Guillermet, Fcc/Hcp martensitic transformation in the Fe-Mn system: Experimental study and thermodynamic analysis of phase stability, Metall. Mater. Trans. A 26A(8), 1957 (1995). DOI: https://doi.org/10.1007/BF02670667.CrossRef

32.

A. Dumay, J.P. Chateau, S. Allain, S. Migot, O. Bouaziz, Influence of addition elements on the stacking-fault energy and mechanical properties of an austenitic Fe-Mn-C steel, Materials Science and Engineering A 483-484(1), 184 (2008). 10.1016/j.msea.2006.12.170CrossRef

33.

K. Ishida, T. Nishizawa, Effect of Alloying Elements on Stability of Epsilon Iron. Trans Jap Inst Met 15(3), 225–231 (1974). https://doi.org/10.2320/matertrans1960.15.225CrossRef

34.

W.S. Yang, C.M. Wan, The influence of aluminium content to the stacking fault energy in Fe-Mn-Al-C alloy system, Journal of Materials Science 25(3), 1821 (1990). DOI: https://doi.org/10.1007/BF01045392.CrossRef

35.

S. Chen, C.Y. Chung, C. Yan, T.Y. Hsu, Effect of fcc antiferromagnetism on martensitic transformation in Fe-Mn-Si based alloys, Materials Science and Engineering A 264(1-2), 262 (1999). 10.1016/s0921-5093(98)01105-8CrossRef

36.

P.H. Adler, G.B. Olson, W.S. Owen, Strain Hardening of Hadfield Manganese Steel, Metallurgical and Materials Transactions A 17A(10), 1725 (1986). DOI: https://doi.org/10.1007/BF02817271.CrossRef

37.

I.A. Yakubtsov, A. Ariapour, D.D. Perovic, Effect of nitrogen on stacking fault energy of fcc iron-based alloys, Acta Mater. 47(4), 1271 (1999). 10.1016/S1359-6454(98)00419-4CrossRef

38.

. , The role of magnetism in the calculation of phase diagrams, Physica B+C 103(1), 82 (1981). 10.1016/0378-4363(81)91004-4CrossRef

39.

X. Wu, T.Y. Hsu, Effect of the Neel temperature, TN, on martensitic transformation in Fe-Mn-Si-based shape memory alloys, Materials Characterization 45(2), 137 (2000). DOI: https://doi.org/10.1016/S1044-5803(00)00066-8.CrossRef

40.

Y.S. Zhang, X. Lu, X. Tian, Z. Qin, Compositional dependence of the Néel transition, structural stability, magnetic properties and electrical resistivity in Fe-Mn-Al-Cr-Si alloys, Materials Science and Engineering A 334(1–2), 19 (2002). DOI: https://doi.org/10.1016/S0921-5093(01)01781-6.CrossRef

41.

J.N. DuPont, A.R. Marder, Dilution in single pass arc welds, Metall. Mater. Trans. B 27B(3), 481 (1996). DOI: https://doi.org/10.1007/BF02914913.CrossRef

42.

J.N. Dupont: in Welding Fundamentals and Processes, vol. 6A (ASM International, 2018), pp. 115–121. https://doi.org/10.31399/asm.hb.v06a.a0005589

43.

G.M. Pharr, An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments, Journal of Materials Research 7(6), 1564 (1992). DOI: https://doi.org/10.1557/JMR.1992.1564.CrossRef

44.

R. Elliott, K. Coley, S. Mostaghel, M. Barati, Review of Manganese Processing for Production of TRIP/TWIP Steels, Part 2: Reduction Studies, Jom 70(5), 680 (2018). DOI: https://doi.org/10.1007/s11837-018-2773-8.CrossRef

45.

B. Hu, H. Luo, F. Yang, H. Dong, Recent progress in medium-Mn steels made with new designing strategies, a review, Journal of Materials Science and Technol. 33(12), 1457 (2017). DOI: https://doi.org/10.1016/j.jmst.2017.06.017.CrossRef

46.

X. Qiao, L. Han, W. Zhang, J. Gu, Nano-indentation investigation on the mechanical stability of individual austenite in high-carbon steel, Materials Characterization 110, 86 (2015). DOI: https://doi.org/10.1016/j.matchar.2015.10.024.CrossRef

47.

S. Sadeghpour, A. Kermanpur, A. Najafizadeh, Investigation of the effect of grain size on the strain-induced martensitic transformation in a high-Mn stainless steel using nanoindentation, Materials Science and Engineering A 612, 214 (2014). DOI: https://doi.org/10.1016/j.msea.2014.06.055.CrossRef

48.

Y. Kim, T.H. Ahn, D.W. Suh, H.N. Han, Variant selection during mechanically induced martensitic transformation of metastable austenite by nanoindentation, Scripta Mater. 104, 13 (2015). DOI: https://doi.org/10.1016/j.scriptamat.2015.03.014.CrossRef

49.

T.H. Ahn, S.B. Lee, K.T. Park, K.H. Oh, H.N. Han, Strain-induced \(\epsilon \)-martensite transformation during nanoindentation of high-nitrogen steel, Materials Science and Engineering A 598, 56 (2014). DOI: https://doi.org/10.1016/j.msea.2014.01.030.CrossRef

50.

T.H. Ahn, C.S. Oh, D.H. Kim, K.H. Oh, H. Bei, E.P. George, H.N. Han, Investigation of strain-induced martensitic transformation in metastable austenite using nanoindentation, Scripta Mater. 63(5), 540 (2010). DOI: https://doi.org/10.1016/j.scriptamat.2010.05.024.CrossRef

51.

B.C. De Cooman, Y. Estrin, S.K. Kim, Twinning-induced plasticity (TWIP) steels, Acta Mater. 142, 283 (2018). DOI: https://doi.org/10.1016/j.actamat.2017.06.046.CrossRef

52.

C. Haase, C. Zehnder, T. Ingendahl, A. Bikar, F. Tang, B. Hallstedt, W. Hu, W. Bleck, D.A. Molodov, On the deformation behavior of \(\kappa \)-carbide-free and \(\kappa \)-carbide-containing high-Mn light-weight steel, Acta Mater. 122, 332 (2017). DOI: https://doi.org/10.1016/j.actamat.2016.10.006.CrossRef

53.

B. De Cooman: in Phase Transformations in Steels, vol. 2 (Elsevier, 2012), pp. 295–331. https://doi.org/10.1533/9780857096111.2.295

54.

D. Hull, D.J. Bacon: Introduction to Dislocations (Elsevier, 2011). https://doi.org/10.1016/C2009-0-64358-0

55.

R. Xiong, H. Peng, S. Wang, H. Si, Y. Wen, Effect of stacking fault energy on work hardening behaviors in Fe-Mn-Si-C high manganese steels by varying silicon and carbon contents, Materials & Design 85, 707 (2015). DOI: https://doi.org/10.1016/j.matdes.2015.07.072.CrossRef

56.

Q. Xie, Z. Pei, J. Liang, D. Yu, Z. Zhao, P. Yang, R. Li, M. Eisenbach, K. An, Transition from the twinning induced plasticity to the \(\gamma \)-\(\epsilon \) transformation induced plasticity in a high manganese steel, Acta Mater. 161, 273 (2018). DOI: https://doi.org/10.1016/j.actamat.2018.09.020.CrossRef

57.

B. Sun, D. Palanisamy, D. Ponge, B. Gault, F. Fazeli, C. Scott, S. Yue, D. Raabe, Revealing fracture mechanisms of medium manganese steels with and without delta-ferrite, Acta Mater. 164, 683 (2019). DOI: https://doi.org/10.1016/j.actamat.2018.11.029.CrossRef

Titel: Thermodynamic Stacking Fault Energy, Chemical Composition, and Microstructure Relationship in High-Manganese Steels
Publikationsdatum: 01.07.2020
Erschienen in: Metallurgical and Materials Transactions A / Ausgabe 9/2020
Print ISSN: 1073-5623
Elektronische ISSN: 1543-1940
DOI: https://doi.org/10.1007/s11661-020-05877-z

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 9/2020

The Critical Chloride Concentration of Austenitic and Duplex Stainless Steel Reinforcing Bars

Effects of Mg Content on Characteristics of Nanoscale TiN Particles and Toughness of Heat-Affected Zones of Steel Plates After High-Heat-Input Welding

The Ecosystem of Research, Education, and Community

Stored Energy Evaluation for High Strength Dual-Phase Steels with Different Pre-annealing Conditions

Experimental Study of the Micromechanical Behavior of Ferrite in DP Steel Under Various Stress States

On the Corrosion Mechanism of Borided X12CrNiMoV12-3 Steel Immersed in a Neutral Aqueous Solution Containing Chloride and Sulfate Ions

Premium Partner

Marktübersichten