Skip to main content
Erschienen in: Metallurgical and Materials Transactions A 6/2015

01.06.2015

Thermomechanical Fatigue of Ductile Cast Iron and Its Life Prediction

verfasst von: Xijia Wu, Guangchun Quan, Ryan MacNeil, Zhong Zhang, Xiaoyang Liu, Clayton Sloss

Erschienen in: Metallurgical and Materials Transactions A | Ausgabe 6/2015

Einloggen

Aktivieren Sie unsere intelligente Suche um passende Fachinhalte oder Patente zu finden.

search-config
loading …

Abstract

Thermomechanical fatigue (TMF) behaviors of ductile cast iron (DCI) were investigated under out-of-phase (OP), in-phase (IP), and constrained strain-control conditions with temperature hold in various temperature ranges: 573 K to 1073 K, 723 K to 1073 K, and 433 K to 873 K (300 °C to 800 °C, 450 °C to 800 °C, and 160 °C to 600 °C). The integrated creep-fatigue theory (ICFT) model was incorporated into the finite element method to simulate the hysteresis behavior and predict the TMF life of DCI under those test conditions. With the consideration of four deformation/damage mechanisms: (i) plasticity-induced fatigue, (ii) intergranular embrittlement, (iii) creep, and (iv) oxidation, as revealed from the previous study on low cycle fatigue of the material, the model delineates the contributions of these physical mechanisms in the asymmetrical hysteresis behavior and the damage accumulation process leading to final TMF failure. This study shows that the ICFT model can simulate the stress–strain response and life of DCI under complex TMF loading profiles (OP and IP, and constrained with temperature hold).

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Literatur
1.
Zurück zum Zitat J.R. Davis, ed.: ASM Specialty Handbook: Cast Irons, ASM International, Materials Park, OH, 1996. J.R. Davis, ed.: ASM Specialty Handbook: Cast Irons, ASM International, Materials Park, OH, 1996.
2.
Zurück zum Zitat G.M. Goodrich, Iron Castings Engineering Handbook, American Foundry Society (AFS), Des Plaines, IL, 2003. G.M. Goodrich, Iron Castings Engineering Handbook, American Foundry Society (AFS), Des Plaines, IL, 2003.
3.
Zurück zum Zitat R. Elliott, Cast Iron Technology, Butterworths, London, UK, 1988. R. Elliott, Cast Iron Technology, Butterworths, London, UK, 1988.
4.
Zurück zum Zitat D. Li, R. Perrin, G. Burger, D. McFarlan, B. Black, R. Logan, and R. Williams: Advances in Lightweight Automotive Castings and Wrought Aluminum Alloys, 2004 SAE World Congress, Detroit, Michigan, March 8–11, No. 2004-01-0792, 2004. D. Li, R. Perrin, G. Burger, D. McFarlan, B. Black, R. Logan, and R. Williams: Advances in Lightweight Automotive Castings and Wrought Aluminum Alloys, 2004 SAE World Congress, Detroit, Michigan, March 8–11, No. 2004-01-0792, 2004.
5.
Zurück zum Zitat B. Black, G. Burger, R. Logan, R. Perrin, and R. Gundlach: Microstructure and Dimensional Stability in Si-Mo Ductile Irons for Elevated Temperature Applications, SAE International, No. 2002-01-2115. B. Black, G. Burger, R. Logan, R. Perrin, and R. Gundlach: Microstructure and Dimensional Stability in Si-Mo Ductile Irons for Elevated Temperature Applications, SAE International, No. 2002-01-2115.
6.
Zurück zum Zitat D.L. Sponseller, W.G. Scholz, and D.F. Rundle, “Development of Low-Alloy Ductile Irons for Service at 1200-1500 F” AFS Trans. 1968, vol. 76, pp. 353-368. D.L. Sponseller, W.G. Scholz, and D.F. Rundle, “Development of Low-Alloy Ductile Irons for Service at 1200-1500 F” AFS Trans. 1968, vol. 76, pp. 353-368.
7.
Zurück zum Zitat T. Kobayashi, K. Nishino, Y. Kimoto, Y. Awano, Y. Hibino, and H. Ueno, “673K Embrittlement of Ferritic Spheroidal Graphite Cast Iron by Magnesium”, Casting Engineering, 1998, vol. 70, pp. 273-278. T. Kobayashi, K. Nishino, Y. Kimoto, Y. Awano, Y. Hibino, and H. Ueno, “673K Embrittlement of Ferritic Spheroidal Graphite Cast Iron by Magnesium”, Casting Engineering, 1998, vol. 70, pp. 273-278.
8.
Zurück zum Zitat D. Li and C. Sloss: 2010 SAE World Congress, April 13–15, Detroit, MI, SAE International, No. 2010-01-0654, 2010. D. Li and C. Sloss: 2010 SAE World Congress, April 13–15, Detroit, MI, SAE International, No. 2010-01-0654, 2010.
9.
Zurück zum Zitat Y.-J. Kim, H. Jang, and Y.-J. Oh, Metall. and Mater. Trans. A, 2009, vol. 40A, pp. 2087-2097.CrossRef Y.-J. Kim, H. Jang, and Y.-J. Oh, Metall. and Mater. Trans. A, 2009, vol. 40A, pp. 2087-2097.CrossRef
10.
Zurück zum Zitat F. Szmytka, L. Rémy, H. Maitournam, A. Köster, Int. J. Plasticity, 2010, vol. 26, pp. 905-924.CrossRef F. Szmytka, L. Rémy, H. Maitournam, A. Köster, Int. J. Plasticity, 2010, vol. 26, pp. 905-924.CrossRef
11.
Zurück zum Zitat L.Rémy, F.Szmytka, L.Bucher, Int. J. Fatigue, 2013, vol. 53, pp. 2-14.CrossRef L.Rémy, F.Szmytka, L.Bucher, Int. J. Fatigue, 2013, vol. 53, pp. 2-14.CrossRef
12.
Zurück zum Zitat T. Seifert, H. Riedel, Int. J. Fatigue, 2010, vol. 32, pp. 1358-1367.CrossRef T. Seifert, H. Riedel, Int. J. Fatigue, 2010, vol. 32, pp. 1358-1367.CrossRef
13.
Zurück zum Zitat T. Seifert, G. Maier, A. Uihlein, K.-H. Lang, H. Riedel, Int. J. Fatigue, 2010, vol. 32, pp. 1368-1377.CrossRef T. Seifert, G. Maier, A. Uihlein, K.-H. Lang, H. Riedel, Int. J. Fatigue, 2010, vol. 32, pp. 1368-1377.CrossRef
14.
Zurück zum Zitat X.J. Wu, T. Quan, R. MacNeil, Z. Zhang and C. Sloss, Failure Mechanisms and Damage Model of Ductile Cast Iron under Low-Cycle Fatigue Conditions, Metall. and Mater. Trans. A, 2014, vol. 45A, pp.5088-5097. X.J. Wu, T. Quan, R. MacNeil, Z. Zhang and C. Sloss, Failure Mechanisms and Damage Model of Ductile Cast Iron under Low-Cycle Fatigue Conditions, Metall. and Mater. Trans. A, 2014, vol. 45A, pp.5088-5097.
15.
Zurück zum Zitat ASTM E2368-10: Standard Practice for Strain Controlled Thermomechanical Fatigue Testing, American Society for Testing of Materials, West Conshohocken, PA, 2004. ASTM E2368-10: Standard Practice for Strain Controlled Thermomechanical Fatigue Testing, American Society for Testing of Materials, West Conshohocken, PA, 2004.
16.
Zurück zum Zitat K. Ishii, M. Nakada, S. Takahashi, M. Enomoto, and Y. Konishi: Evaluation of Thermal Fatigue Life on the Exhaust Manifold by Analyzing Restraint Ratio. FISITA World Automotive Congress, paper # F2000G295, June 12-15, 2000, Seoul, Korea. K. Ishii, M. Nakada, S. Takahashi, M. Enomoto, and Y. Konishi: Evaluation of Thermal Fatigue Life on the Exhaust Manifold by Analyzing Restraint Ratio. FISITA World Automotive Congress, paper # F2000G295, June 12-15, 2000, Seoul, Korea.
19.
Zurück zum Zitat R. W. Neu, H. Sehitoglu, Metall. Trans. 1989, vol. 20 (9), pp. 1755-1767.CrossRef R. W. Neu, H. Sehitoglu, Metall. Trans. 1989, vol. 20 (9), pp. 1755-1767.CrossRef
20.
Zurück zum Zitat R. W. Neu, H. Sehitoglu, Metall. Trans. 1989, vol. 20 (9), pp. 1769-1783.CrossRef R. W. Neu, H. Sehitoglu, Metall. Trans. 1989, vol. 20 (9), pp. 1769-1783.CrossRef
21.
Zurück zum Zitat X.J. Wu: in Gas Turbine, I. Gurrappa, ed., Sciyo, Rijeka, 2010, pp. 215–82. X.J. Wu: in Gas Turbine, I. Gurrappa, ed., Sciyo, Rijeka, 2010, pp. 215–82.
22.
Zurück zum Zitat X.J. Wu: Trans. ASME J. Eng. Gas Turbines Power, 2009, vol. 131, pp. 032101/1–1/6. X.J. Wu: Trans. ASME J. Eng. Gas Turbines Power, 2009, vol. 131, pp. 032101/1–1/6.
23.
Zurück zum Zitat Toth Information Systems, Private Communication, 2013. Toth Information Systems, Private Communication, 2013.
Metadaten
Titel
Thermomechanical Fatigue of Ductile Cast Iron and Its Life Prediction
verfasst von
Xijia Wu
Guangchun Quan
Ryan MacNeil
Zhong Zhang
Xiaoyang Liu
Clayton Sloss
Publikationsdatum
01.06.2015
Verlag
Springer US
Erschienen in
Metallurgical and Materials Transactions A / Ausgabe 6/2015
Print ISSN: 1073-5623
Elektronische ISSN: 1543-1940
DOI
https://doi.org/10.1007/s11661-015-2873-9

Weitere Artikel der Ausgabe 6/2015

Metallurgical and Materials Transactions A 6/2015 Zur Ausgabe

    Marktübersichten

    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.