Skip to main content
516787 Suchergebnisse für:

Materials Technology 

sortieren nach |
"Aktualität" sortiert die Ergebnisse nach Publikationsdatum. "Relevanz" berücksichtigt auch noch andere Faktoren wie zum Beispiel die Häufigkeit der Suchbegriffe im Text.
  1. 2024 | Buch

    Knitting Science, Technology, Process and Materials

    A Sustainable Approach

    This volume explains knitting technology in an easily-comprehensible and user-friendly manner. The manufacturing of a cost-effective quality product requires careful planning and thorough knowledge of the product as well as production technology.

    Buchreihe:
    Textile Science and Clothing Technology
    Verlag:
    Springer Nature Switzerland
  2. 2024 | OriginalPaper | Buchkapitel

    Electrochemical Approach for Hydrogen Technology: Fundamental Concepts and Materials

    This chapter presents aspects related to the electrochemical approach to hydrogenHydrogen technologies, considering key concepts that drive both the thermodynamicThermodynamic and kineticKinetic phenomena of the redoxRedox processes involved.

    verfasst von:
    Victor Márquez, Eva Ng, Daniel Torres, Carlos Borrás, Benjamín R. Scharifker, Franco M. Cabrerizo, Lorean Madriz, Ronald Vargas
    Erschienen in:
    Advances in Catalysts Research (2024)
  3. 2024 | OriginalPaper | Buchkapitel

    Development of Rapid-Setting Repair Materials Through One-Part Geopolymer Technology

    The development of geopolymer materials has been over 35 years. Compared with ordinary portland cement (OPC), geopolymer materials have many excellent properties such as high-early strength, nice durability, low carbon emission…etc. Therefore …

    verfasst von:
    Wei-Hao Lee, Ying-Kuan Tsai, Chien-Chin Chen, De-Wei Gao
    Erschienen in:
    Proceedings of the 3rd International Civil Engineering and Architecture Conference (2024)
  4. 2024 | OriginalPaper | Buchkapitel

    3D Printing Technology: Materials, Application and Current Trends in Process Improvement

    Additive manufacturing, or 3D printing, is production technology for manufacturing parts, especially parts with complex geometry or complex structures. It opens different possibilities in part mass optimization, rapid prototyping as well as …

    verfasst von:
    Ivan Palinkas, Eleonora Desnica, Jasmina Pekez, Aleksandar Rajic, Milan Rackov
    Erschienen in:
    32nd International Conference on Organization and Technology of Maintenance (OTO 2023) (2024)
  5. 2024 | OriginalPaper | Buchkapitel

    Intelligent Data Analysis for Materials Obtained Using Selective Laser Melting Technology

    In this study, we present a software solution (toolkit) for intelligent data analysis obtained using the selective laser melting (SLM) technology. We have developed a program that uses Data Science approaches and machine learning (ML) algorithms …

    verfasst von:
    Dmitry Evsyukov, Vladimir Bukhtoyarov, Aleksei Borodulin, Vadim Lomazov
    Erschienen in:
    High-Performance Computing Systems and Technologies in Scientific Research, Automation of Control and Production (2024)
  6. 19.12.2023 | ReviewPaper

    Numerical simulation studies of jet rapid solidification technology for magnetic materials: a review

    Jet rapid solidification (JRS) is a key process to obtain the ribbon of magnetic materials. Numerical simulation is an effective method to analyze real-time distribution of status parameters during the JRS process and optimize the process. In this …

  7. 2024 | OriginalPaper | Buchkapitel

    Evolution of “International Advanced Research Center for Powder Metallurgy and New Materials (ARCI)”, a Unique Centre for Translating Materials Research to Technology

    The International Advanced Research Centre for Powder Metallurgy and New Materials (ARCI) is a research and development institution established in 1990 as a product of India’s extensive bilateral cooperation program, the Integrated Long-Term …

    verfasst von:
    R. Vijay, D. Srinivasa Rao, Roy Johnson, R. Gopalan, Tata Narasinga Rao
    Erschienen in:
    Indian Metallurgy (2024)
  8. 26.11.2023 | Online First

    Optimization of surface mechanical process parameters of composite materials based on industrial engineering technology

    The so-called industrial engineering mainly refers to the large-scale industrial production and industrial economic system as the object of technological research; the purpose is to further optimize the industrial engineering production system, in …

  9. 2024 | OriginalPaper | Buchkapitel

    Metallurgical and Materials Engineering at the National Institute of Technology Karnataka: A Historical Overview

    The Department of Metallurgical & Materials Engineering at the National Institute of Technology Karnataka was established in 1965, and offers undergraduate, graduate, and doctoral programmes. The curriculum includes intensive training in …

    verfasst von:
    K. Narayan Prabhu
    Erschienen in:
    Indian Metallurgy (2024)
  10. 26.10.2023 | ReviewPaper

    Materials and wetting issues in molten carbonate fuel cell technology: a review

    Molten carbonate fuel cell (MCFC) technology continues to attract significant attention due to its high performance over a range of carbon-containing fuel gases and non-toxic chemistry of its carbonate electrolyte which makes it especially …

  11. 2024 | OriginalPaper | Buchkapitel

    Sterilization of Biotic Agents by Microwave Technology in Construction Materials

    The use of high-frequency electromagnetic microwave radiation in civil engineering is no novelty. There have been various discussions related to this issue. However, they are often based on inaccurate and superficial knowledge. One of the reasons …

    verfasst von:
    Miloslav Novotný, Jindřich Sobotka, Radim Kolář, Táňa Švecová
    Erschienen in:
    Modern Building Materials, Structures and Techniques (2024)
  12. 03.06.2023 | ReviewPaper

    Science and Technology of Additive Manufacturing Progress: Processes, Materials, and Applications

    As a special review article, several significant and applied results in 3D printing and additive manufacturing (AM) science and technology are reviewed and studied. Which, the reviewed research works were published in 2020. Then, we would have …

  13. 2024 | OriginalPaper | Buchkapitel

    Challenges in Additive Manufacturing Technology: Post Processing, Design and Material’s Selection

    It is important to bear in mind that additive manufacturing (AM) did not emerge in isolation but rather built upon earlier technologies. The rapid adoption of 3D printing technology across industries serves as a testament to its effective …

    verfasst von:
    Hamaid Mahmood Khan, Saad Waqar
    Erschienen in:
    Practical Implementations of Additive Manufacturing Technologies (2024)
  14. 2023 | OriginalPaper | Buchkapitel

    Waste-Free Technology for the Production of Building Materials by Mining and Processing Plants

    The purpose of the study is to develop a waste-free technology for the production of building materials by mining and processing plants. The emission spectral analysis method was used to determine the chemical composition of mining waste and …

    verfasst von:
    Oksana Vovk, Kostiantyn Tkachuk, Oksana Tverda, Andrii Syniuk, Eduard Kukuiashnyi
    Erschienen in:
    Research Developments in Sustainable Aviation (2023)
  15. 2023 | OriginalPaper | Buchkapitel

    Structural Optimization via 3D Printing Technology Using NPR Materials

    3D printing technology is now the trendiest term in engineering in general and advanced structural design engineering in particular. Finding structures with optimum geometry and materials that fit the technologies above is difficult. This study …

    verfasst von:
    Tran-Trung Nguyen, Phu-Cuong Nguyen, Thanh-Tuan Tran, Nguyen Van Thuan
    Erschienen in:
    Proceedings of the 3rd Annual International Conference on Material, Machines and Methods for Sustainable Development (MMMS2022) (2023)
  16. 2024 | OriginalPaper | Buchkapitel

    Ergonomics and Materials Technology: The Case of the Uniform of the Cycle Couriers in the City of Recife–Pernambuco/Brazil

    This article brings the partial result of the dissertation of the Postgraduate Program in Design of Federal University of Pernambuco, in the line of research Design, Ergonomics and Technology, which aims to propose improvements for professional …

    verfasst von:
    Thuanne R. F. Teixeira, Etienne A. A. Silva Martins, Germannya D’Garcia Silva
    Erschienen in:
    Advances in Fashion and Design Research II (2024)
  17. Open Access 2021 | Open Access | Buch

    Data Technology in Materials Modelling

    This open access book discusses advances in semantic interoperability for materials modelling, aiming at integrating data obtained from different methods and sources into common frameworks, and facilitating the development of platforms where …

    verfasst von:
    Dipl.-Ing. Martin Thomas Horsch, Dr. Silvia Chiacchiera, Dr. Welchy Leite Cavalcanti, Björn Schembera
    Buchreihe:
    SpringerBriefs in Applied Sciences and Technology
    Verlag:
    Springer International Publishing
  18. 2023 | OriginalPaper | Buchkapitel

    Technology of Gold Extraction from Clay Ore and Technogenic Raw Materials

    Currently technogenic gold-bearing raw materials (tailings and dumps of existing or closed mines) are considered by many experts as a promising raw material for the extraction of residual gold. Technogenic raw materials, as a rule, are crushed …

    verfasst von:
    Sergey Bordunov, Yuriy Fedorchuk, Olga Galtseva, Gufana Narimanova
    Erschienen in:
    Emerging Trends in Materials Research and Manufacturing Processes (2023)
  19. 2023 | Buch

    Recent Advances in Materials and Manufacturing Technology

    Select Proceedings of ICAMMT 2022

    This book presents the select proceedings of the 2nd International Conference on Advances in Materials and Manufacturing Technology (ICAMMT 2022). The book covers the latest trends in existing and new materials, manufacturing processes, evaluation …

    Buchreihe:
    Lecture Notes in Mechanical Engineering
    Verlag:
    Springer Nature Singapore
  20. 2023 | OriginalPaper | Buchkapitel

    A Review on Selective Laser Sintering 3D Printing Technology for Polymer Materials

    This review analyzes different approaches used to study selective laser sintering (SLS) technology of polymer materials. These main approaches concern: thermal behavior and fatigue. Regarding the first behavior, researchers studied extensively the …

    verfasst von:
    Fatima-ezzahrae Jabri, Aissa Ouballouch, Larbi Lasri, Rachid EL Alaiji
    Erschienen in:
    Proceedings of CASICAM 2022 (2023)

Suchergebnisse filtern:

Suchoperatoren:

„ ... ... “ Findet Dokumente mit genau dieser Wortgruppe in exakt dieser Schreibweise und Reihenfolge (z.B., "employer branding").
AND / UND Findet Dokumente, in denen beide Begriffe zusammen vorkommen (z.B., vertrieb UND bonus).
OR / ODER Findet Dokumente, in denen einer der beiden oder beide Begriffe vorkommen (z.B., porsche OR volkswagen).
Leerzeichen Findet Dokumente, in denen alle Begriffe vorkommen. Der Leerschritt wird als UND interpretiert (z.B., mensch roboter alltag).
NOT / NICHT Findet Dokumente, in denen der Begriff nach NOT nicht vorkommt (z.B., ford NOT "harrison ford").
COUNT(...)>n Findet Dokumente, in denen der gesuchte Begriff mehr als n mal vorkommt. n steht für eine beliebige Anzahl (z.B., COUNT(getriebe)>8).
NEAR(..., ..., ) Findet Dokumente, in denen beide Begriffe in beliebiger Reihenfolge innerhalb von maximal n Worten zueinander stehen. Empfehlung: wählen Sie zwischen 15 und 30 als maximale Wortanzahl (z.B., NEAR(hybrid, antrieb, 20)).
* Findet Dokumente, in denen der Begriff in Wortvarianten vorkommt, wobei diese VOR, HINTER oder VOR und HINTER dem Suchbegriff anschließen können (z.B., leichtbau*, *leichtbau, *leichtbau*).
? Findet Dokumente mit dem Suchbegriff in verschiedenen Schreibweisen, hier mit s oder z, also organisation und organization. Das ? steht für eine einzige Stelle (z.B., organi?ation).
& + - Sonderzeichen werden als UND interpretiert (z.B., Mann + Hummel).

Sie können Operatoren mit Ihrer Suchanfrage kombinieren, um diese noch präziser einzugrenzen.

Fahren Sie mit der Maus über den Suchoperator, um eine Erklärung seiner Funktionsweise anzuzeigen.