nach oben

Erschienen in:

2019 | OriginalPaper | Buchkapitel

4. Toughening Mechanism in Epoxy Resin Modified Recycled Rubber Based Composites Reinforced with Gamma-Alumina, Graphene and CNT

verfasst von : A. B. Irez, E. Bayraktar, I. Miskioglu

Erschienen in: Mechanics of Composite, Hybrid and Multifunctional Materials, Volume 5

Verlag: Springer International Publishing

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

In this research, low cost devulcanized recycled rubber based composites were designed with fine gamma alumina (d < 5–10 μm) reinforcements containing minor reinforcements such as nano graphene platelets and Carbon Nano Tubes. After determination (in different wt% percentages) of the reinforcements with matrix, a special process was applied to complete successfully the manufacturing of the composites. After that, the relevant toughening mechanisms for the most suitable reinforcements were analyzed in detail for aeronautical engineering applications. For this purpose, certain mechanical and physical properties (ISO 13586:2000, K_Ic – Fracture toughness stress intensity factor and G_Ic- Critical energy release rate in mode I) have been determined by fracture toughness tests (static 3P bending test with single edge notch specimens, Charpy impact, etc.). Microstructural and fracture surfaces analysis have been carried out by means of Optical Microscopy (OM) and Scanning Electron Microscopy (SEM).

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Vorheriges Kapitel Study of Mechanical Characteristics of Banana and Jute Fiber Reinforced Polyester Composites

Nächstes Kapitel AlSi10Mg Nanocomposites Prepared by DMLS Using In-Situ CVD Growth of CNTs: Process Effects and Mechanical Characterization

Wan, C., Chen, B.: Reinforcement and interphase of polymer/graphene oxide nanocomposites. J. Mater. Chem. 22, 3637–3646 (2012)CrossRef

Bokobza, L.: Multiwall carbon nanotube elastomeric composites: A review. Polymer. 48, 4907–4492 (2007)CrossRef

Zhang, G., et al.: Effect of functionalization of graphene nanoplatelets on the mechanical and thermal properties of silicone rubber composites. Materials. 9(2), 92 (2016)CrossRef

Shokoohi, S., Arefazar, A., Khosrokhavar, R.: Silane coupling agents in polymer-based reinforced composites: A review. J. Reinf. Plast. Compos. 27.5, 473–485 (2008)CrossRef

Zaimova, D., Bayraktar, E., Miskioglu, I.: Design and manufacturing of new elastomeric composites: Mechanical properties, chemical and physical analysis. Int. J. Composites Part B, Elsevier, USA 1(1):1–12, November 2016, on line 2017

Sadasivuni, K.-K., Ponnamma, D., Thomas, S., Grohens, Y.: Evolution from to graphene elastomer composites. Prog. Polym. Sci. 39, 749–778 (2014)CrossRef

Zaimova, D., Bayraktar, E., Miskioglu, I., Dishovsky, N.: Wear resistance of elastomeric based composites by continuous multi-cycle indentation used in manufacturing engineering. Adv. Mater. Res. 939:106–113 (2014), Trans Tech Publications, Switzerland, Doi:10.4028/www.scientific.net/AMR.939.106

Zhang, G., Wang, F., Dai, J., Huang, Z.: Effect of functionalization of graphene nanoplatelets on the mechanical and thermal properties of silicone rubber composites. Materials. 9(92), 1–13 (2016)

Irez, A. B., Bayraktar, E., Miskioglu, I.: Mechanical Characterization of Epoxy – Scrap Rubber Based Composites Reinforced With Alumina Fibers, Springer link, Mechanics of Composite and Multi-functional Materials, vol. 6, pp. 59–70 (2017). ISBN 978-3-319-63408-1, https://doi.org/10.1007/978-3-319-63408-1

10.

Ferreira, L. M. P., Miskioglu, I., Bayraktar, E., Katundi, D.: Mechanical and Tribological Properties of Scrap Rubber Reinforced With Al2O3 Fiber, Aluminium and TiO2, Springer link, Mechanics of Composite and Multi-functional Materials, vol 7, pp. 37–44 (2016). ISBN 978-3-319-41766-0, https://doi.org/10.1007/978-3-319-41766-0

11.

Kinloch, A.J., Mohammed, R.D., Taylor, A.C.: The effect of silica nano-particles and rubber particles on the toughness of multiphase thermosetting epoxy polymers. J. Mater. Sci. 40, 5083–5086 (2005)CrossRef

12.

Burak Irez, A., Hay, J., Miskioglu, I., Bayraktar, E.: Scrap-rubber Based Composites Reinforced With Boron and Alumina, Springer link, Mechanics of Composite and Multi-functional Materials, vol. 6, pp. 1–10

Titel: Toughening Mechanism in Epoxy Resin Modified Recycled Rubber Based Composites Reinforced with Gamma-Alumina, Graphene and CNT
verfasst von: A. B. Irez
E. Bayraktar
I. Miskioglu
Verlag: Springer International Publishing
Buch: Mechanics of Composite, Hybrid and Multifunctional Materials, Volume 5
Print ISBN: 978-3-319-95509-4

Electronic ISBN: 978-3-319-95510-0

Copyright-Jahr: 2019
DOI: https://doi.org/10.1007/978-3-319-95510-0_4

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht