nach oben

Journal of Materials Engineering and Performance

Erschienen in:

01.02.2013

Tribological Behavior of a Heat-Treated Cobalt-Based Alloy

verfasst von: Y. Bedolla-Gil, M. A. L. Hernandez-Rodriguez

Erschienen in: Journal of Materials Engineering and Performance | Ausgabe 2/2013

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

The present study reviews the tribological behavior of a Co-Cr-Mo alloy regarding to microstructural changes caused by solution and aged heat treatments. The influence of microstructure on wear resistance was assessed in a pin-on-disk configuration. It was found that after a long solution heat treatment of 6 h at 1200 °C, most of the carbides were dissolved into the matrix, and coarse grain size was obtained. Solution treatment for 1 h presented fine grains and globular carbides along the matrix. Aging at 850 °C resulted in a quantity of phase transformation which was different from austenite face cubic centered to martensite hexagonal close packed (HCP); 35% of HCP was reached during 8 h of treatment and 60% for 15 h. As-cast condition and 6-h solution heat treatment exhibited the greatest wear loss, while 1-h solution treatment and samples containing HCP phase showed a threefold lower wear.

Vorheriger Artikel Research on the Hot Deformation Behavior of Al-Zn-Mg-Sc-Zr Alloy During Compression at Elevated Temperature

Nächster Artikel Inhibition of Mild Steel Corrosion Using l-Histidine and Synergistic Surfactants Additives

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

W. Betterridge, Cobalt and its Alloys, Halsted Press, Chichester, 1982

D. Dowson, C. Hardaker, M. Flett, and G.H. Isaac, A Hip Joint Simulator Study of the Performance of Metal-on-Metal Joints Part I: The Role of Materials, J. Arthroplasty, 2004, 19, p 118–123

J.L. Tipper, P.J. Firkins, E. Ingham, and J. Fisher, Quantitative Analysis of the Wear and Wear Debris from Low and High Carbon Content Cobalt Chrome Alloys used in Metal on Metal Total Hip Replacements, J. Mater. Sci. Mater. Med., 1999, 10, p 353–362CrossRef

S.C. Scholes and A. Unsworth, Pin-on-Plate Studies on the Effect of Rotation on the Wear of Metal-on-Metal Samples, J. Mater. Sci. Mater. Med., 2001, 12, p 299–303CrossRef

A. Chiba, K. Kumagai, N. Nomura, and S. Miyakawa, Pin-on-Disk Wear Behavior in a Like-on-Like Configuration in a Biological Environment of High Carbon Cast and Low Carbon Forged Co-29Cr-6Mo Alloys, Acta Mater., 2007, 55, p 1309–1318CrossRef

A.J. Saldívar-García and H.F. López, Microstructural Effects on the Wear Resistance of Wrought and As-Cast Co-Cr-Mo-C Implant Alloys, J. Biomed. Mater. Res., 2005, 74A, p 269–274CrossRef

A.de J. Saldívar García, A. Maní Medrano, and A. Salinas Rodríguez, Formation of Hcp Martensite During the Isothermal Aging of an Fcc Co-27Cr-5Mo-0.05C Orthopedic Implant Alloy, Metall. Mater. Trans. A, 1999, 30A, p 1177–1184CrossRef

H. López and A. Saldivar-Garcia, Transformation in a Cast Co-Cr-Mo-C Alloy, Metall. Mater. Trans. A, 2008, 39A, p 8–18CrossRef

C. Montero-Ocampo, R. Juarez, and A. Salinas Rodriguez, Effect of Fcc-Hcp Phase Transformation Produced by Isothermal Aging on the Corrosion Resistance of a Co-27Cr-5Mo-0.05C Alloy, Metall. Mater. Trans. A, 2002, 33A, p 2229–2235CrossRef

10.

R. Varano, J.D. Bobyn, J.B. Medley, and S. Yue, The Effect of Microstructure on the Wear of Cobalt-Based Alloys used in Metal-on-Metal Hip Implants, Proc. Inst. Mech. Eng. H, 2005, 220(145), p 145–159

11.

K. Rajan and J.B. Vander Sande, Room Temperature Strengthening Mechanisms in a Co-Cr-Mo-C Alloy, J. Mater. Sci., 1982, 17, p 769–778CrossRef

12.

M. Sage and C. Guillaud, Méhode d’analyse quantitative des varieties allotropiques du cobalt par les rayons X, Rev. Met., 1950, 47, p 139–145 (in French)

13.

Y. Bedolla-Gil, A. Juarez-Hernandez, A. Perez-Unzueta, E. Garcia-Sanchez, R. Mercado-Solis, and M. Hernandez-Rodriguez, Influence of Heat Treatments on Mechanical Properties of a Biocompatibility Alloy ASTM F75, Rev. Mex. Fis., 2009, 55, p 1–5

14.

A.J. Clemow and B.L. Daniell, Solution Treatment Behavior of Co-Cr-Mo-C Alloy, J. Biomed. Mater. Res., 1979, 13, p 265–279CrossRef

15.

K. Rajan, Phase Transformations in a Wrought Co-Cr-Mo-C Alloy, Metall. Trans. A, 1982, 13A, p 1161–1166

16.

N.F. Garza-Montes-de-Oca and W.M. Rainforth, Wear Mechanisms Experienced by a Work Roll Grade High Speed Steel Under Different Environmental Conditions, Wear, 2009, 267, p 441–448CrossRef

17.

H.S. Dobbs and L.M. Robertson, Heat Treatment of Cast Co-Cr-Mo for Orthopaedic Implant Use, J. Mater. Sci., 1983, 18, p 391–401CrossRef

18.

M. Herrera, A. Espinoza, J. Méndez, M. Castro, J. López, and J. Rendon, Effect of C Content on the Mechanical Properties of Solution Treated As-Cast ASTM F-75, J. Mater. Sci. Mater. Med., 2004, 15, p 1–5

19.

L.E. Ramírez, M. Castro, M. Méndez, J. Lacaze, M. Herrera, and G. Lesoult, Precipitation Path of Secondary Phases During Solidification of the Co-25.5% Cr-5.5% Mo-0.26% C Alloy, Scripta Mater., 2002, 47, p 811–816CrossRef

20.

R.N. Taylor and B. Waterhouse, A Study of the Ageing Behaviour of a Cobalt Based Implant Alloy, J. Mater. Sci., 1983, 18, p 3265–3280CrossRef

21.

M. Caudillo, M. Herrera-Trejo, M.R. Castro, E. Ramírez, C.R. González, and J.I. Juárez, On Carbide Dissolution in As-Cast ASTM F-75 Alloy, J. Biomed. Mater. Res., 2002, 59, p 378–385CrossRef

22.

M.A.L. Hernández-Rodríguez, R.D. Mercado-Solís, A.J. Pérez-Unzueta, D.I. Martinez-Delgado, and M. Cantú-Sifuentes, Wear of Cast Metal–Metal Pairs for Total Replacement Hip Prostheses, Wear, 2005, 259, p 958–963CrossRef

Titel: Tribological Behavior of a Heat-Treated Cobalt-Based Alloy
verfasst von: Y. Bedolla-Gil
M. A. L. Hernandez-Rodriguez
Publikationsdatum: 01.02.2013
Verlag: Springer US
Erschienen in: Journal of Materials Engineering and Performance / Ausgabe 2/2013
Print ISSN: 1059-9495
Elektronische ISSN: 1544-1024
DOI: https://doi.org/10.1007/s11665-012-0261-9

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 2/2013

Microstructural Effects on the Mechanical Integrity of a TRIP-800 Steel Welded by Laser-CO2 Process

Analysis of Formation and Interfacial WC Dissolution Behavior of WC-Co/Invar Laser-TIG Welded Joints

The Effect of Crystallinity of Carbon Source on Mechanically Activated Carbothermic Synthesis of Nano-Sized SiC Powders

Sintering Behavior and Machinability of Phlogopite Glass Ceramics Containing Fe2O3

Machinability Study of Stir Cast Hypoeutectic Aluminum-Silicon Alloys During Turning

Effects of Calcination on Structural, Photocatalytic Properties of TiO2 Nanopowders Via TiCl4 Hydrolysis

Premium Partner

Marktübersichten