nach oben

Tribology Letters

Erschienen in:

01.06.2019 | Original Paper

Tribology of Selected Hard Coatings for Oil and Gas Applications Up to 450 °C

verfasst von: Reza Gheisari, Andreas A. Polycarpou

Erschienen in: Tribology Letters | Ausgabe 2/2019

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Three different surface treatments, which are of interest to the oil and gas industry, and are commonly used for tribological applications at elevated temperatures, namely chromium carbide (CrC) coating, Ni–P coating, and boronized nickel alloy were investigated. In addition to different structural compositions, these surface treatments possess different surface topographies, which is of practical importance. Pin-on-disk experiments were conducted to measure their friction and wear performance against tungsten carbide. Experiments were carried out at room temperature and 450 °C using a specialized tribometer. Nanomechanical properties of the coatings were obtained at room and elevated temperatures. To investigate the physical and chemical changes that occurred during tribo-testing, scanning electron microscopy of the coatings’ cross section, wear tracks, and wear debris were obtained. Energy-Dispersive X-ray Spectroscopy analysis revealed the changes in elemental composition of the coatings wear track after the experiments, which could affect their tribological performance. It was found that the intensity and composition of the generated oxides, changes in the mechanical properties of the surface materials with temperature, and the surface topographical characteristics affected the tribo-mechanism. Among the tested samples, boronized nickel alloy surface outperformed the coatings with lower friction coefficient and lower wear rate, especially at elevated temperature.

Vorheriger Artikel On the Assessment of Mechanical Degradation of Grease Using Entropy Generation Rate

Nächster Artikel Tribological Response of PEEK to Temperature Induced by Frictional and External Heating

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

K. Homlberg, A. Matthews, Coating tribology, properties, techniques and applications in surface engineering, Tribol. Ser. 28 (1994)

Xu, Z., Shi, X., Zhang, Q., Zhai, W., Li, X., Yao, J., Song, S., Chen, L., Xiao, Y., Zhu, Q.: Wear and friction of TiAl matrix self-lubricating composites against Si₃N₄ in air at room and elevated temperatures. Tribol. Trans. 57, 1017–1027 (2014). https://doi.org/10.1080/10402004.2014.931497 CrossRef

Blau, P.J., Erdman, D.L., Ohriner, E., Jolly, B.C.: High-temperature galling characteristics of ti-6AL-4 V with and without surface treatments. Tribol. Trans. 54, 192–200 (2011). https://doi.org/10.1080/10402004.2010.534837 CrossRef

Holmberg, K., Mathews, A.: Coatings tribology: a concept, critical aspects and future directions. Thin Solid Films 253, 173–178 (1994). https://doi.org/10.1016/0040-6090(94)90315-8 CrossRef

Prasad, S.V., McDevitt, N.T., Zabinski, J.S.: Tribology of tungsten disulfide-nanocrystalline zinc oxide adaptive lubricant films from ambient to 500°C. Wear 237, 186–196 (2000). https://doi.org/10.1016/S0043-1648(99)00329-4 CrossRef

Gulbiński, W., Suszko, T., Sienicki, W., Warcholiński, B.: Tribological properties of silver-and copper-doped transition metal oxide coatings. Wear 254, 129–135 (2003)CrossRef

Medvedovski, E., Jiang, J.R., Robertson, M.: Tribological properties of boride based thermal diffusion coatings. Adv. Appl. Ceram. 113, 427–437 (2014). https://doi.org/10.1179/1743676114Y.0000000175 CrossRef

Takács, G.: Electrical submersible pumps manual: design, operations, and maintenance. Gulf Professional Pub./Elsevier, Houston (2009)

Lee, L., Behera, P., Sriraman, K.R., Chromik, R.R.: The effect of contact stress on the sliding wear behaviour of Zn-Ni electrodeposited coatings. Wear 400–401, 82–92 (2018). https://doi.org/10.1016/J.WEAR.2017.12.018 CrossRef

10.

Abourayak, K., Fayeulle, S., Vincent, L., Ribeiro, C., Cavaleiro, A., Vieira, M.T.: Tribological behaviour at elevated temperatures of thin physical vapour deposited coatings. Surf. Coatings Technol. 80, 171–175 (1996)CrossRef

11.

Fu, Y., Li, H., Ji, L., Liu, X., He, N., Zhou, H., Chen, J.: Preparation and high-temperature tribological properties of CrAlVYN-Ag nanocomposite coatings. Mater. Manuf. Process. 32, 409–415 (2017). https://doi.org/10.1080/10426914.2016.1176189 CrossRef

12.

Radil, K., DellaCorte, C.: The performance of PS400 subjected to sliding contact at temperatures from 260 to 927°C. Tribol. Trans. 60, 957–964 (2017). https://doi.org/10.1080/10402004.2016.1231357 CrossRef

13.

Li, J., Xiong, D.: Tribological behavior of graphite-containing nickel-based composite as function of temperature, load and counterface. Wear 266, 360–367 (2009). https://doi.org/10.1016/J.WEAR.2008.06.020 CrossRef

14.

Hu, E., Hu, X., Liu, T., Fang, L., Dearn, K.D., Xu, H.: The role of soot particles in the tribological behavior of engine lubricating oils. Wear 304, 152–161 (2013). https://doi.org/10.1016/j.wear.2013.05.002 CrossRef

15.

Li, J.L., Xiong, D.S.: Tribological properties of nickel-based self-lubricating composite at elevated temperature and counterface material selection. Wear 265, 533–539 (2008). https://doi.org/10.1016/J.WEAR.2007.09.005 CrossRef

16.

Zhen, J., Li, F., Zhu, S., Ma, J., Qiao, Z., Liu, W., Yang, J.: Friction and wear behavior of nickel-alloy-based high temperature self-lubricating composites against Si3N4 and Inconel 718. Tribol. Int. 75, 1–9 (2014). https://doi.org/10.1016/J.TRIBOINT.2014.03.005 CrossRef

17.

Polcar, T., Cvrček, L., Široký, P., Novák, R.: Tribological characteristics of CrCN coatings at elevated temperature. Vacuum 80, 113–116 (2005). https://doi.org/10.1016/j.vacuum.2005.07.033 CrossRef

18.

Singla, Y.K., Dwivedi, D.K., Arora, N.: On the modeling of dry sliding adhesive wear parameters of vanadium additive iron-based alloys at elevated temperatures. Surf. Coatings Technol. 283, 223–233 (2015). https://doi.org/10.1016/j.surfcoat.2015.10.078 CrossRef

19.

Polychronopoulou, K., Demas, N.G., Gibson, P.N., Rebholz, C., Polycarpou, A.A.: Effect of Cu content on the structure, and performance of substoichiometric Cr-N coatings. Tribol. Lett. 38, 57–68 (2010). https://doi.org/10.1007/s11249-009-9572-x CrossRef

20.

Hardell, J., Prakash, B.: Tribological performance of surface engineered tool steel at elevated temperatures. Int. J. Refract. Met. Hard Mater. 28, 106–114 (2010). https://doi.org/10.1016/j.ijrmhm.2009.07.009 CrossRef

21.

Taktak, S.: Tribological behaviour of borided bearing steels at elevated temperatures. Surf. Coatings Technol. 201, 2230–2239 (2006). https://doi.org/10.1016/j.surfcoat.2006.03.032 CrossRef

22.

Solzak, T.A., Polycarpou, A.A.: Tribology of hard protective coatings under realistic operating conditions for use in oilless piston-type and swash-plate compressors. Tribol. Trans. 53, 319–328 (2010). https://doi.org/10.1080/10402000903283300 CrossRef

23.

Acchar, W., Gomes, U.U., Kaysser, W.A., Goring, J.: Strength degradation of a tungsten carbide-cobalt composite at elevated temperatures. Mater. Charact. 41, 27–32 (1999)CrossRef

24.

Gheisari, R., Polycarpou, A.A.: Three-body abrasive wear of hard coatings: effects of hardness and roughness. Thin Solid Films 666, 66–75 (2018). https://doi.org/10.1016/J.TSF.2018.07.052 CrossRef

25.

Ranganatha, S., Venkatesha, T.V., Vathsala, K.: Development of high performance electroless Ni–P–HNT composite coatings. Appl. Surf. Sci. 263, 149–156 (2012). https://doi.org/10.1016/J.APSUSC.2012.09.020 CrossRef

26.

Novák, M., Vojtěch, D., Vítů, T.: Influence of heat treatment on tribological properties of electroless Ni–P and Ni–P–Al2O3 coatings on Al–Si casting alloy. Appl. Surf. Sci. 256, 2956–2960 (2010). https://doi.org/10.1016/J.APSUSC.2009.11.057 CrossRef

27.

Yoon, J., Jee, Y., Lee, S.: Plasma paste boronizing treatment of the stainless steel AISI 304. Surf. Coatings Technol. 112, 71–75 (1999). https://doi.org/10.1016/S0257-8972(98)00743-9 CrossRef

28.

Tabur, M., Izciler, M., Gul, F., Karacan, I.: Abrasive wear behavior of boronized AISI 8620 steel. Wear 266, 1106–1112 (2009). https://doi.org/10.1016/J.WEAR.2009.03.006 CrossRef

29.

Sen, U.: Friction and wear properties of thermo-reactive diffusion coatings against titanium nitride coated steels. Mater. Des. 26, 167–174 (2005). https://doi.org/10.1016/j.matdes.2004.05.010 CrossRef

30.

Chen, F.S., Lee, P.Y., Yeh, M.C.: Thermal reactive deposition coating of chromium carbide on die steel in a fluidized bed furnace. Mater. Chem. Phys. 53, 19–27 (1998). https://doi.org/10.1016/S0254-0584(97)02048-8 CrossRef

31.

Zikin, A., Hussainova, I., Katsich, C., Badisch, E., Tomastik, C.: Advanced chromium carbide-based hardfacings. Surf. Coatings Technol. 206, 4270–4278 (2012). https://doi.org/10.1016/J.SURFCOAT.2012.04.039 CrossRef

32.

Oliver, W.C., Pharr, G.M.: An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments. J. Mater. Res. 7, 1564–1583 (1992). https://doi.org/10.1557/JMR.1992.1564 CrossRef

33.

Lan, P., Zhang, Y., Dai, W., Polycarpou, A.A.: A phenomenological elevated temperature friction model for viscoelastic polymer coatings based on nanoindentation. Tribol. Int. 119, 299–307 (2018). https://doi.org/10.1016/J.TRIBOINT.2017.11.009 CrossRef

34.

Engqvist, H., Wiklund, U.: Mapping of mechanical properties of WC-Co using nanoindentation. Tribol. Lett. 8, 147–152 (2000). https://doi.org/10.1023/A:1019143419984 CrossRef

35.

Duszová, A., Halgaš, R., Bľanda, M., Hvizdoš, P., Lofaj, F., Dusza, J., Morgiel, J.: Nanoindentation of WC–Co hardmetals. J. Eur. Ceram. Soc. 33, 2227–2232 (2013). https://doi.org/10.1016/J.JEURCERAMSOC.2012.12.018 CrossRef

36.

Gee, M.G., Roebuck, B., Lindahl, P., Andren, H.-O.: Constituent phase nanoindentation of WC/Co and Ti(C, N) hard metals. Mater. Sci. Eng., A 209, 128–136 (1996). https://doi.org/10.1016/0921-5093(95)10099-7 CrossRef

37.

Wood, R.J.K.: Tribology of thermal sprayed WC–Co coatings. Int. J. Refract. Met. Hard Mater. 28, 82–94 (2010). https://doi.org/10.1016/J.IJRMHM.2009.07.011 CrossRef

38.

Kundu, S., Das, S.K., Sahoo, P.: Influence of load and temperature on tribological behaviour of electroless Ni-P deposits. IOP Conf. Ser. Mater. Sci. Eng. 149, 12046 (2016)CrossRef

39.

Gök, M.S., Küçük, Y., Erdoğan, A., Öge, M., Kanca, E., Günen, A.: Dry sliding wear behavior of borided hot-work tool steel at elevated temperatures. Surf. Coatings Technol. 328, 54–62 (2017). https://doi.org/10.1016/j.surfcoat.2017.08.008 CrossRef

40.

Li, J., Xiong, D., Wu, H., Dai, J., Cui, T.: Tribological properties of molybdenized silver-containing nickel base alloy at elevated temperatures. Tribol. Int. 42, 1722–1729 (2009). https://doi.org/10.1016/j.triboint.2008.12.004 CrossRef

41.

Geng, Z., Duan, D., Hou, S., Li, S.: Tribological behavior of WC-12Co air plasma-sprayed coating at elevated temperatures. Tribol. Trans. 59, 55–61 (2016). https://doi.org/10.1080/10402004.2015.1068423 CrossRef

42.

Kundu, S., Das, S.K., Sahoo, P.: Influence of load and temperature on tribological behaviour of electroless Ni-P deposits. IOP Conf. Ser. Mater. Sci. Eng. 149, 012046 (2016). https://doi.org/10.1088/1757-899x/149/1/012046 CrossRef

43.

Lan, P., Meyer, J.L., Vaezian, B., Polycarpou, A.A.: Advanced polymeric coatings for tilting pad bearings with application in the oil and gas industry. Wear 354–355, 10–20 (2016). https://doi.org/10.1016/j.wear.2016.02.013 CrossRef

44.

H.O. Pierson, Handbook of refractory carbides and nitrides: properties, characteristics, processing and applications, William Andrew, 1996

45.

León, O., Staia, M., Hintermann, H.: High temperature wear of an electroless Ni–P–BN (h) composite coating. Surf. Coatings Technol. 163–164, 578–584 (2003). https://doi.org/10.1016/S0257-8972(02)00663-1 CrossRef

46.

Lin, K., Lai, P.: The Crystallization of an Electroless Ni-P Deposit. J. Electrochem. Soc. 136, 3803–3809 (1989). https://doi.org/10.1149/1.2096552 CrossRef

47.

Parker, K.: Effects of heat treatment on the properties of electroless nickel deposits. Plat. Surf. Finish. 68, 71–77 (1981)

48.

Palaniappa, M., Seshadri, S.K.: Friction and wear behavior of electroless Ni–P and Ni–W–P alloy coatings. Wear 265, 735–740 (2008). https://doi.org/10.1016/j.wear.2008.01.002 CrossRef

49.

Takeuchi, E., Fujii, K., Katagiri, T.: Sliding wear characteristics of gas boronized steel. Wear 55, 121–130 (1979). https://doi.org/10.1016/0043-1648(79)90184-4 CrossRef

50.

Sen, S., Sen, U., Bindal, C.: Tribological properties of oxidised boride coatings grown on AISI 4140 steel. Mater. Lett. 60, 3481–3486 (2006). https://doi.org/10.1016/J.MATLET.2006.03.036 CrossRef

51.

Bindal, C., Erdemir, A.: Ultralow friction behavior of borided steel surfaces after flash annealing. Appl. Phys. Lett. 923, 923 (1995). https://doi.org/10.1063/1.116232 CrossRef

52.

Staia, M.H., D’Alessandria, M., Quinto, D.T., Roudet, F., Marsal Astort, M.: High-temperature tribological characterization of commercial TiAlN coatings. J. Phys. Condens. Matter. 18, S1727 (2006). https://doi.org/10.1088/0953-8984/18/32/s04 CrossRef

53.

Wang, D.-Y., Weng, K.-W., Chang, C.-L., Ho, W.-Y.: Synthesis of Cr3C2 coatings for tribological applications. Surf. Coatings Technol. 120–121, 622–628 (1999). https://doi.org/10.1016/S0257-8972(99)00430-2 CrossRef

54.

Casas, B., Ramis, X., Anglada, M., Salla, J., Llanes, L.: Oxidation-induced strength degradation of WC–Co hardmetals. Int. J. Refract. Met. Hard Mater. 19, 303–309 (2001). https://doi.org/10.1016/S0263-4368(01)00033-6 CrossRef

55.

Asthana, P., Liang, H., Usta, M., Ucisik, A.H.: Wear and surface characterization of boronized pure iron. J. Tribol. 129, 1 (2007). https://doi.org/10.1115/1.2401211 CrossRef

56.

Balaraju, J.N., Sankara Narayanan, T.S.N., Seshadri, S.K.: Electroless Ni–P composite coatings. J. Appl. Electrochem. 33, 807–816 (2003). https://doi.org/10.1023/a:1025572410205 CrossRef

Titel: Tribology of Selected Hard Coatings for Oil and Gas Applications Up to 450 °C
verfasst von: Reza Gheisari
Andreas A. Polycarpou
Publikationsdatum: 01.06.2019
Verlag: Springer US
Erschienen in: Tribology Letters / Ausgabe 2/2019
Print ISSN: 1023-8883
Elektronische ISSN: 1573-2711
DOI: https://doi.org/10.1007/s11249-019-1159-6

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 2/2019

In Situ Synthesized Phosphate-based Ionic Liquids as High-Performance Lubricant Additives

Lubricity and Adsorption of Castor Oil Sulfated Sodium Salt Emulsion Solution on Titanium Alloy

Relaxation Tribometry: A Generic Method to Identify the Nature of Contact Forces

Effect of Running-In Induced Groove-Structured Wear and Fe(acac)3 on Ultralow Friction When Lubricating with 5CB Liquid Crystal

The Influence of Slide–Roll Ratio on the Extent of Micropitting Damage in Rolling–Sliding Contacts Pertinent to Gear Applications

How Sliding and Hydrodynamics Contribute to Articular Cartilage Fluid and Lubrication Recovery

Premium Partner

Marktübersichten