Skip to main content
Erschienen in: Metallurgist 3-4/2014

01.07.2014

Use of the Program PAM-STAMP to Study the Effect of the As-Received Condition of a Material on its Formability During Stamping

verfasst von: A. A. Ershov, Yu. N. Loginov

Erschienen in: Metallurgist | Ausgabe 3-4/2014

Einloggen

Aktivieren Sie unsere intelligente Suche um passende Fachinhalte oder Patente zu finden.

search-config
loading …

Abstract

The effect of the as-received condition of an aluminum alloy on its stampability in the production of an automobile part is examined. An explanation is given of the process of using software package PAM-STAMP to model the sheet-stamping operation. The results obtained from the modeling clearly show the need to correctly choose not only the material that will be used to make the part but also the properties that it will have as a result of the condition in which it is received.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Literatur
1.
Zurück zum Zitat B. N. Matveev, “New types of materials and semifinished products for the automobile industry (survey of the foreign and domestic literature),” Zagotov. Proizv. Mashinostr., No. 6, 47–52 (2007). B. N. Matveev, “New types of materials and semifinished products for the automobile industry (survey of the foreign and domestic literature),” Zagotov. Proizv. Mashinostr., No. 6, 47–52 (2007).
2.
Zurück zum Zitat I. N. Fridlyander, V. G. Sister, O. E. Grushko, et al, “Aluminum alloys – promising materials for the automobile industry,” MiTOM, No. 9, 3–9 (2002). I. N. Fridlyander, V. G. Sister, O. E. Grushko, et al, “Aluminum alloys – promising materials for the automobile industry,” MiTOM, No. 9, 3–9 (2002).
3.
Zurück zum Zitat S. Holmberg and P. Thilderkvist, “Influence of material properties and stamping conditions on the stiffness and static dent resistance of automotive panels,” Materials & Design, 23, No. 8, 681–691 (2002).CrossRef S. Holmberg and P. Thilderkvist, “Influence of material properties and stamping conditions on the stiffness and static dent resistance of automotive panels,” Materials & Design, 23, No. 8, 681–691 (2002).CrossRef
4.
Zurück zum Zitat Yu. N. Loginov, B. I. Kamenetskii, and G. I. Studenok, “Modeling the strain state of a circular sheet during drawing,” Izv. Vyssh. Uchebn. Zaved. Chern. Metall., No. 3, 26–28 (2006). Yu. N. Loginov, B. I. Kamenetskii, and G. I. Studenok, “Modeling the strain state of a circular sheet during drawing,” Izv. Vyssh. Uchebn. Zaved. Chern. Metall., No. 3, 26–28 (2006).
5.
Zurück zum Zitat I. A. Choudhury, O. H. Lai, and L. T. Wong, “PAM-STAMP in the simulation of stamping process of an automotive component,” Simul. Model.: Pract. & Theory, 14, No. 1, 71–81 (2006).CrossRef I. A. Choudhury, O. H. Lai, and L. T. Wong, “PAM-STAMP in the simulation of stamping process of an automotive component,” Simul. Model.: Pract. & Theory, 14, No. 1, 71–81 (2006).CrossRef
6.
Zurück zum Zitat A. A. Ershov and Yu. N. Loginov, “Using the inverse solver INVERSE in PAM-STAMP 2G to assess the formability of a part,” Metallurgist, 57, No. 5/6, 372–377 (2013).CrossRef A. A. Ershov and Yu. N. Loginov, “Using the inverse solver INVERSE in PAM-STAMP 2G to assess the formability of a part,” Metallurgist, 57, No. 5/6, 372–377 (2013).CrossRef
7.
Zurück zum Zitat Yu. N. Loginov and A. A. Ershov, “Using the software QFORM to model the formation of a pull crack during pressing,” Kuzn.-Shtamp. Proizv. Obrab. Mater. Davl., No. 7, 42–46 (2013). Yu. N. Loginov and A. A. Ershov, “Using the software QFORM to model the formation of a pull crack during pressing,” Kuzn.-Shtamp. Proizv. Obrab. Mater. Davl., No. 7, 42–46 (2013).
8.
Zurück zum Zitat Yu. N. Loginov and A. A. Ershov, “Effect of the form of the strain-hardening curve on local deformation during the upsetting of titanium semifinished products,” Titan, No. 1, 22–28 (2012). Yu. N. Loginov and A. A. Ershov, “Effect of the form of the strain-hardening curve on local deformation during the upsetting of titanium semifinished products,” Titan, No. 1, 22–28 (2012).
9.
Zurück zum Zitat M. S. Mohamed, A. D. Foster, J. Lin, et al., “Investigation of deformation and failure features in hot stamping of AA6082: experimentation and modeling,” Int. J. Mach. Tools & Manuf., 53, 27–38 (2012).CrossRef M. S. Mohamed, A. D. Foster, J. Lin, et al., “Investigation of deformation and failure features in hot stamping of AA6082: experimentation and modeling,” Int. J. Mach. Tools & Manuf., 53, 27–38 (2012).CrossRef
10.
Zurück zum Zitat O. Fahrettin, E. Emre, T. Serkan, and R. P. Catalin, “Effects of aging parameters on formability of 6061-O alloy,” Materials and Design, 31, 4847–4852 (2010).CrossRef O. Fahrettin, E. Emre, T. Serkan, and R. P. Catalin, “Effects of aging parameters on formability of 6061-O alloy,” Materials and Design, 31, 4847–4852 (2010).CrossRef
11.
Zurück zum Zitat N. Abedrabbo, F. Pourboghrat, and J. Carsley, “Forming of AA5182-O and AA554-O at elevated temperatures using coupled thermo-mechanical finite element models,” Int. J. Plasticity, 23, 841–875 (2007).CrossRef N. Abedrabbo, F. Pourboghrat, and J. Carsley, “Forming of AA5182-O and AA554-O at elevated temperatures using coupled thermo-mechanical finite element models,” Int. J. Plasticity, 23, 841–875 (2007).CrossRef
12.
Zurück zum Zitat S. K. Hong, K. Muammer, and N. Jun, “Development of an analytical model for warm deep drawing of aluminum alloys,” J. Mater. Proc. Technol., 197, 393–407 (2008).CrossRef S. K. Hong, K. Muammer, and N. Jun, “Development of an analytical model for warm deep drawing of aluminum alloys,” J. Mater. Proc. Technol., 197, 393–407 (2008).CrossRef
13.
Zurück zum Zitat A. A. Ershov, V. V. Kotov, and Yu. N. Loginov, “Calculation of the compensation of a stamping tool after springback in the software package PAM-STAMP 2G,” Metallurgist, 56, No. 7/8, 477–481 (2012).CrossRef A. A. Ershov, V. V. Kotov, and Yu. N. Loginov, “Calculation of the compensation of a stamping tool after springback in the software package PAM-STAMP 2G,” Metallurgist, 56, No. 7/8, 477–481 (2012).CrossRef
14.
Zurück zum Zitat A. A. Yershov, V. V. Kotov, and Yu. N. Loginov, “Optimization of the initial form of a semifinished product in PAM-STAMP 2G,” Metallurgist, 56, No. 3/4, 231–235 (2012).CrossRef A. A. Yershov, V. V. Kotov, and Yu. N. Loginov, “Optimization of the initial form of a semifinished product in PAM-STAMP 2G,” Metallurgist, 56, No. 3/4, 231–235 (2012).CrossRef
15.
Zurück zum Zitat H. Halim, D. S. Wilkinson, and M. Niewczas, “The Portevin–Le Chatelier (PLC) effect and shear band formation in an AA5754 alloy,” Acta Mater., 55, 4151–4160 (2007).CrossRef H. Halim, D. S. Wilkinson, and M. Niewczas, “The Portevin–Le Chatelier (PLC) effect and shear band formation in an AA5754 alloy,” Acta Mater., 55, 4151–4160 (2007).CrossRef
Metadaten
Titel
Use of the Program PAM-STAMP to Study the Effect of the As-Received Condition of a Material on its Formability During Stamping
verfasst von
A. A. Ershov
Yu. N. Loginov
Publikationsdatum
01.07.2014
Verlag
Springer US
Erschienen in
Metallurgist / Ausgabe 3-4/2014
Print ISSN: 0026-0894
Elektronische ISSN: 1573-8892
DOI
https://doi.org/10.1007/s11015-014-9886-2

Weitere Artikel der Ausgabe 3-4/2014

Metallurgist 3-4/2014 Zur Ausgabe

    Marktübersichten

    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.