nach oben

Erschienen in:

2022 | OriginalPaper | Buchkapitel

Utilization of Waste Ethylene-Propylene-Diene-Monomer (EPDM) Rubber Modified Binder in Asphalt Concrete Mixtures

verfasst von : Ankush Kumar, Rajan Choudhary, Abhinay Kumar

Erschienen in: Proceedings of the Fifth International Conference of Transportation Research Group of India

Verlag: Springer Nature Singapore

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

The ethylene-propylene-diene-monomer (EPDM) rubber waste from discarded non-tire automotive rubber parts is explored as an asphalt binder modifier in this study. Rutting characterization of the binders was performed through Superpave and Shenoy rutting parameters and zero shear viscosity (ZSV). For fatigue evaluation, a dynamic shear rheometer-based elastic recovery test was performed while the cracking resistance of the binders was evaluated through the Glover-Rowe parameter. Further, Marshall stability, tensile strength ratio, and resilient modulus tests were used to characterize the performance of asphalt mixes. Results of binder testing showed that the rutting, fatigue, and cracking performance of EPDM modified binders were better than the control binder. Mix performance results indicated that the EPDM modified binders enhanced the stability, moisture damage resistance, and stiffness characteristics of the mixes. Overall, findings from the study suggest that waste EPDM has a good prospect to be utilized in asphalt binder modification.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Wirtschaft"

Online-Abonnement

Mit Springer Professional "Wirtschaft" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 340 Zeitschriften

aus folgenden Fachgebieten:

Bauwesen + Immobilien
Business IT + Informatik
Finance + Banking
Management + Führung
Marketing + Vertrieb
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Vorheriges Kapitel Experimental Investigation on the Effect of Microwave Heating Technique on the Healing Characteristics of Bituminous Concrete Mixtures

Nächstes Kapitel Assessing the Suitability of Polyethylene Terephthalate (PET) in Bituminous Concrete Mixes

Murphy M, O’mahony M, Lycett C, Jamieson I (2000) Bitumens modified with recycled polymers. Mater Struct 33(7):438–444

Airey GD (2002) Rheological evaluation of ethylene vinyl acetate polymer modified bitumens. Constr Build Mater 16(8):473–487CrossRef

Kalantar ZN, Karim MR, Mahrez A (2012) A review of using waste and virgin polymer in pavement. Constr Build Mater 33:55–62CrossRef

McNally T (2011) Introduction to polymer modified bitumen (PmB). Woodhead Publishing, CambridgeCrossRef

Polacco G, Filippi S, Merusi F, Stastna G (2015) A review of the fundamentals of polymer-modified asphalts: asphalt/polymer interactions and principles of compatibility. Adv Colloid Interface Sci 224:72–112CrossRef

Kandhal PS (2006) Quality control requirements for using crumb rubber modified bitumen (CRMB) in bituminous mixtures. J Indian Roads Congr 67(1):99–104

Sienkiewicz M, Borzędowska-Labuda K, Wojtkiewicz A, Janik H (2017) Development of methods improving storage stability of bitumen modified with ground tire rubber: a review. Fuel Process Technol 159:272–279CrossRef

Fukumori K, Matsushita M (2003) Material recycling technology of crosslinked rubber waste. R&D Rev Toyota CRDL 38(1):39–47

IS 73 (2013) Paving Bitumen—specification. Bureau of Indian Standards, New Delhi

10.

ASTM D2872 (2012) Standard test method for effect of heat and air on a moving film of asphalt (rolling thin-film oven test). ASTM International, West Conshohocken, PA

11.

ASTM D6521 (2018) Standard practice for accelerated aging of asphalt binder using a pressurized aging vessel (PAV). ASTM International, West Conshohocken, PA

12.

Shenoy A (2001) Refinement of the Superpave specification parameter for performance grading of asphalt. J Transp Eng 127(5):357–362CrossRef

13.

Liao MC, Chen JS (2011) Zero shear viscosity of bitumen-filler mastics. J Mater Civ Eng 23(12):1672–1680CrossRef

14.

AASHTO TP 123 (2016) Standard method of test for measuring asphalt binder yield energy and elastic recovery using the dynamic shear rheometer. American Association of State and Highway Transportation Officials, Washington, DC

15.

Glover CJ, Davison RR, Domke CH, Ruan Y, Juristyarini P, Knorr DB, Jung SH (2005) Development of a new method for assessing asphalt binder durability with field validation. Tex Dept Transp 1872:1–334

16.

Rowe GM (2011) Prepared discussion following the Anderson AAPT paper cited previously. AAPT 80:649–662

17.

Anderson RM, King GN, Hanson DI, Blankenship PB (2011) Evaluation of the relationship between asphalt binder properties and non-load related cracking. J Assoc Asphalt Paving Technol 80:615–664

18.

Kandhal PS (1977) Low-temperature ductility in relation to pavement performance. In: Marek C (ed) Low temperature properties of bituminous materials and compacted bituminous paving mixtures. ASTM International, West Conshohocken, PA, pp 95–106

19.

Elkashef M, Williams RC, Cochran E (2018) Investigation of fatigue and thermal cracking behavior of rejuvenated reclaimed asphalt pavement binders and mixtures. Int J Fatigue 108:90–95CrossRef

20.

Garcia Cucalon L, Kaseer F, Arámbula-Mercado E, Epps Martin A, Morian N, Pournoman S, Hajj E (2019) The crossover temperature: significance and application towards engineering balanced recycled binder blends. Road Mater Pavement Des 20(6):1391–1412CrossRef

21.

MoRTH (2013) Specifications for road and bridge works (Fifth Revision). Indian Roads Congress, Govt. of India, Ministry of Road Transport and Highways, New Delhi

22.

ASTM D6927 (2015) Standard test method for Marshall stability and flow of asphalt mixtures. West Conshohocken, PA

23.

AASHTO T 283 (2003) Standard method of test for resistance of compacted asphalt mixtures to moisture-induced damage. American Association of State and Highway Transportation Officials, Washington, DC

24.

ASTM D6931 (2017) Standard test method for indirect tensile (IDT) strength of asphalt mixtures. ASTM International, West Conshohocken, PA

25.

AASHTO TP 31 (1991) Standard test method for determining the resilient modulus of bituminous mixtures by indirect tension. American Association of State and Highway Transportation Officials, Washington, DC

26.

Nejad FM, Gholami M, Naderi K, Rahi M (2015) Evaluation of rutting properties of high density polyethylene modified binders. Mater Struct 48(10):3295–3305

27.

Ashish PK, Singh D (2019) Effect of carbon nano tube on performance of asphalt binder under creep-recovery and sustained loading conditions. Constr Build Mater 215:523–543

28.

Ragab M, Abdelrahman M (2014) Effects of interaction conditions on internal network structure of crumb rubber–modified asphalts. Transp Res Rec 2444(1):130–141

29.

Morea F, Agnusdei JO, Zerbino R (2010) Comparison of methods for measuring zero shear viscosity in asphalts. Mater Struct 43(4):499–507

30.

Clopotel CS, Bahia HU (2012) Importance of elastic recovery in the DSR for binders and mastics. Eng J 16(4):99–106

31.

Kumar A, Choudhary R, Kandhal PS, Julaganti A, Behera OP, Singh A, Kumar R (2018) Fatigue characterisation of modified asphalt binders containing warm mix asphalt additives. Road Mater Pavement Des

Titel: Utilization of Waste Ethylene-Propylene-Diene-Monomer (EPDM) Rubber Modified Binder in Asphalt Concrete Mixtures
verfasst von: Ankush Kumar
Rajan Choudhary
Abhinay Kumar
Verlag: Springer Nature Singapore
Buch: Proceedings of the Fifth International Conference of Transportation Research Group of India
Print ISBN: 978-981-16-9920-7

Electronic ISBN: 978-981-16-9921-4

Copyright-Jahr: 2022
DOI: https://doi.org/10.1007/978-981-16-9921-4_35

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Springer Professional "Wirtschaft"

Premium Partner