nach oben

Metallurgist

Erschienen in:

08.10.2024

Vacuum synthesis of composite powder of Al–Ni system for fabricating aluminum-matrix composite reinforced with Al₃Ni particles

verfasst von: K. S. Senkevich, D. A. Ivanov

Erschienen in: Metallurgist | Ausgabe 5/2024

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

The composite powder containing Al₃Ni and Al₃Ni₂ intermetallic compounds was obtained by vacuum synthesis to reinforce the aluminum matrix of the developed composite. For this purpose, nickel and aluminum powders were mixed in a ball mill, followed by heating the resulting mixture in vacuum to 650 °C to initiate an exothermic reaction between the powder components. To obtain an Al–Al₃Ni composite, the synthesized composite powder and matrix aluminum powder were mixed in a mill, followed by compacting the resulting mixture and sintering the obtained samples in vacuum. It has been found that vacuum synthesis results in the formation of a composite powder with heterogeneous phase composition, including Al₃Ni, Al₃Ni₂, Al₄C₃, and Al. Carbon formed as a result of thermal decomposition of stearin on the surface of aluminum particles reacts with aluminum to form aluminum carbide. After sintering the compacted mixture of aluminum and composite powders, a composite reinforced with Al₃Ni and Al₄C₃ phases is formed. Tribological tests have shown that the obtained composite is a promising wear-resistant material with hybrid reinforcement by intermetallic and carbide phases.

Vorheriger Artikel Analyzing methods for enhancing the mechanical properties of hot-finished sintered steels

Nächster Artikel Formation of VKNA-4U powder alloy using the SPS technology with preliminary mechanical activation

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

International Centre for Diffraction Data.

Mitra R (2018) Structural intermetallics and intermetallic-matrix composites: An introduction. Intermet Matrix Compos Prop Appl. https://doi.org/10.1016/b978-0-85709-346-2.00001-7CrossRef

Baker I, Intermetallics EPG (2001) Nickel Aluminides, In: Encyclopedia of Materials: Science and Technology, 2nd edn. Elsevier, Amsterdam, pp 4225–4231CrossRef

Lloyd DJ (1994) Particle reinforced aluminum and magnesium matrix composites. intern Mater Rev 39:1–23CrossRef

Eby FJ, Narayanan SA, Abhiram R, Navaneeth MV, Manu K, Shankar KV, Nidhin AR (2022) Influence of solutionising time on the dendrite morphology and mechanical behavior of Al–Si–Mg–Ni hypoeutectic alloy. Silicon 14:6749–6760. https://doi.org/10.1007/s12633-021-01401-zCrossRef

Uan J, Chen L, Lui T (2001) On the extrusion microstructural evolution of Al–Al₃Ni in situ composite. Acta Mater 49:313–320. https://doi.org/10.1016/S1359-6454(00)00309-8CrossRef

Farajollahi R, Aval HJ, Jamaati R (2023) Development and characterization of in-situ AA2024-Al₃NiCu composites. Intern J Met Cast 17:109–123. https://doi.org/10.1007/s40962-021-00752-yCrossRef

Najarian AR, Emadi R, Hamzeh M (2018) Fabrication of as-cast Al matrix composite reinforced by Al₂O₃/Al₃Ni hybrid particles via in-situ reaction and evaluation of its mechanical properties. Mater Sci Eng B 231:57–65CrossRef

Rajan TPD, Pillai RM, Pa BC (2008) Functionally graded Al–Al₃Ni in situ intermetallic composites: Fabrication and microstructural characterization. J Alloys Compd 453(1/2):L4–L7CrossRef

Qian JW, Li JL, Xiong JT, Zhang FS, Lin X (2012) In situ synthesizing Al₃Ni for fabrication of intermetallic-reinforced aluminum alloy composites by friction stir processing. Mater Sci Eng A 550:279–285CrossRef

10.

Zhang S, Li Y, Frederick A, Wang Y, Wang Y, Allard L, Koehler M, Shin S, Hu A, Feng Z (2023) In-Situ formation of Al₃Ni nano particles in synthesis of Al 7075 alloy by friction stir processing with Ni powder addition. J Mater Process Technol 311:117803CrossRef

11.

Heim FM, Zhang Y, Li X (2018) Uniting strength and toughness of al matrix composites with coordinated Al₃Ni and Al₃Ti reinforcements. Adv Eng Mater 20:1700605CrossRef

12.

Fogagnolo JB, Pallone EMJA, Martin DR, Kiminami CS, Bolfarini C, Botta WJ (2009) Processing of Al matrix composites reinforced with Al–Ni compounds and Al₂O₃ by reactive milling and reactive sintering. J Alloys Compd 471:448–452CrossRef

13.

Reddy BSB, Rajsekar K, Venu M, Dilip JSS, Das S, Das K (2008) Mechanical activation assisted solid-state combustion synthesis of in situ aluminum matrix hybrid (Al₃Ni/Al₂O₃) nano composite. J Alloys Compd 465:97–105. https://doi.org/10.1016/j.jallcom.2007.10.098CrossRef

14.

Mamnooni S, Borhani E, Bovand D (2019) In-situ synthesis of aluminum matrix composite from Al–NiO system by mechanical alloying. Met Mater Intern 25:1–8. https://doi.org/10.1007/s12540-019-00549-zCrossRef

15.

Gxowa-Penxa Z, Daswa P, Modiba R, Mathabathe MN, Bolokang AS (2021) Development and characterization of Al–Al₃Ni–Sn metal matrix composite. Mater Chem Phys 259:124027. https://doi.org/10.1016/j.matchemphys.2020.124027CrossRef

16.

Xue J, Yu X, Yao M, Huang H (2023) The solid-state combustion synthesis of in-situ hybrid (Al₃Ni+Al₂O₃)/Al composites and evaluation of its mechanical properties. J Alloys Compd 934:167917CrossRef

17.

Jiang L, Li Z, Fan G, Zhang D (2011) A flake powder metallurgy approach to Al₂O₃/Al biomimetic nanolaminated composites with enhanced ductility. Scr Mater 65:412–415CrossRef

18.

He HY, Fan GL, Saba F, Tan ZQ, Su Z, Xiong DB, Li ZQ (2023) Enhanced distribution and mechanical properties of high content nanoparticles reinforced metal matrix composite prepared by flake dispersion. Compos 252:110514

19.

Sadeghi B, Cavaliere P (2021) Progress of flake powder metallurgy research. Metals 11:931. https://doi.org/10.3390/met11060931CrossRef

20.

Zhang Z, Li Z, Tan Z, Zhao H, Fan G, Xu Y, Xiong DB, Li Z (2021) Bioinspired Hierarchical Al₂O₃/Al laminated composite fabricated by flake powder metallurgy. Compos Part A Appl Sci Manuf 140:106187. https://doi.org/10.1016/j.compositesa.2020.106187CrossRef

21.

Sadeghi B, Cavaliere P, Balog M, Pruncu CI, Shabani A (2022) Microstructure dependent dislocation density evolution in micro-macro rolled Al₂O₃/Al laminated composite. Mater Sci Eng A 830:142317. https://doi.org/10.1016/j.msea.2021.142317CrossRef

22.

Ivanov DA, Sitnikov AI, Shlyapin SD (2009) Peculiarities of the technology and physico-mechanical properties of a laminated Al₂O₃–Al cermet. Russ J Non-ferrous Met 50:160–165. https://doi.org/10.3103/S1067821209020163CrossRef

23.

Ivanov DA, Ivanov AV, Shlyapin SD (2012) Physicochemical aspects of technology of the Al₂O₃-Al layered cermet obtained using reaction sintering. Russ J Non-ferrous Met 53:338–347. https://doi.org/10.3103/S106782121203011XCrossRef

24.

Ivanov DA, Shlyapin SD, Valyano GE, Fedorova LV (2019) Peculiarities of granulation of the PAP‑2 aluminum powder in the technology of the Al–Al₂O₃ powder composite with a layered structure. Russ J Non-ferrous Met 60:81–86. https://doi.org/10.3103/S106782121901005XCrossRef

25.

Wu L, Yang L, Liu C, Ma Y, Yu Z, Wang T, Liu W, Yan H (2022) The coupling effect of vacuum, pressure and temperature on microstructure and mechanical properties of PM aluminum alloy. Vacuum 196:110728. https://doi.org/10.1016/j.vacuum.2021.110728CrossRef

26.

Ivanov DA (2020) Investigation of physical-mechanical properties and structure of layered cermet Al–Al₂O₃–Al₄C₃. refract Ceram 61:393–398. https://doi.org/10.1007/s11148-020-00491-3CrossRef

27.

Mondolfo LF (1976) Aluminum Alloys: Structure and Properties. Butterworths

28.

Nandwana P, Kannan R, Siddel D (2020) Microstructure evolution during binder jet additive manufacturing of H13 tool steel. Addit Manuf 36:101534. https://doi.org/10.1016/j.addma.2020.101534CrossRef

29.

Kannan R, Nandwana P (2021) Predicting sintering window during supersolidus liquid phase sintering of steels using feedstock analysis and CALPHAD. Mater Lett 304:130648. https://doi.org/10.1016/j.matlet.2021.130648CrossRef

30.

Akçamlı N, Şenyurt B (2021) Fabrication and characterization of in-situ Al₃Ni intermetallic and CeO₂ particulate-reinforced aluminum matrix composites. Ceram Intern 47:21197–21206. https://doi.org/10.1016/j.ceramint.2021.04.122CrossRef

31.

Zuo LJ, Ye B, Feng J, Zhang HX, Kong XY, Jiang HY (2020) Effect of ε‑Al₃Ni phase on mechanical properties of Al–Si–Cu–Mg–Ni alloys at elevated temperature. Mater Sci Eng A 772:138794. https://doi.org/10.1016/j.msea.2019.138794CrossRef

32.

Chen C, Liu FG, Huang CP, Xia Y, Xia C, Niu PL (2023) Comparative strengthening of intermetallic compounds produced in situ by friction stir processing on different aluminum alloy matrixes. j Mater Res Tech 24:816–1826. https://doi.org/10.1016/j.jmrt.2023.03.121CrossRef

33.

Miranda G, Madeira S, Silva FS, Carvalho O (2017) A nanoindentation study on Al3Ni interface of Ni reinforced aluminum-silicon composite. Mech Adv Mater Struct 24(10):871–874. https://doi.org/10.1080/15376494.2016.1196790CrossRef

34.

Jimenez AE, Bermudez MD, Cintas J, Herrera EJ (2009) Dry wear of NiAl₃-reinforced mechanically alloyed aluminum with different microstructure. Wear 266(1/2):255–265. https://doi.org/10.1016/j.wear.2008.06.017CrossRef

Titel: Vacuum synthesis of composite powder of Al–Ni system for fabricating aluminum-matrix composite reinforced with Al3Ni particles
verfasst von: K. S. Senkevich
D. A. Ivanov
Publikationsdatum: 08.10.2024
Verlag: Springer US
Erschienen in: Metallurgist / Ausgabe 5/2024
Print ISSN: 0026-0894
Elektronische ISSN: 1573-8892
DOI: https://doi.org/10.1007/s11015-024-01780-9

Laser welding of aluminum-calcium alloys based on ((Al) + Al4(Ca, La)) eutectic

Modernization of the control system for gas purification in ferroalloy furnaces

Studying the microstructure, phase composition, and wear resistance of alloyed layers after laser surface melting of low-carbon steel 20

Formation of VKNA-4U powder alloy using the SPS technology with preliminary mechanical activation

Development and industrial exploitation of welding technology for heat-resistant nickel alloys for high-temperature nuclear power plants

Influence of the properties of working liquid on the size characteristics of powders obtained under the conditions of electroerosion metallurgy of the wastes of TN20 tungsten-free hard alloy

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht