nach oben

Journal of Materials Engineering and Performance

Erschienen in:

01.12.2013

Water Droplet and Cavitation Erosion Behavior of Laser-Treated Stainless Steel and Titanium Alloy: Their Similarities

Erschienen in: Journal of Materials Engineering and Performance | Ausgabe 12/2013

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

This article deals with water droplet and cavitation erosion behavior of diode laser-treated X10CrNiMoV1222 stainless steel and Ti6Al4V alloy. After laser surface treatment, the water droplet and cavitation erosion resistance (WDER and CER) of these materials improved significantly. The main reason for the improvement is the increased surface hardness and formation of fine-grained microstructures after laser surface treatment. It is observed that there is a similarity in both the phenomena. The WDER and CER can be correlated with a single mechanical property based on modified ultimate resilience (MUR) provided the laser-treated layers are free from microcracks and interface defects. The CER and WDER behavior of HPDL-treated X10CrNiMoV1222 stainless steel and Ti6Al4V alloy samples using different test equipment as per ASTM G32-2003 and ASTM G73-1978, their correlation with MUR, and their damage mechanism compared on the basis of XRD analyses, optical and scanning electron micrographs are discussed and reported in this article.

Vorheriger Artikel Modeling of Ionic Conductivity Enhancement of LiClO4-PVA-C System by TiO2 Addition Using Complex Numerical Model of PDE

Nächster Artikel Dilution and Ferrite Number Prediction in Pulsed Current Cladding of Super-Duplex Stainless Steel Using RSM

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

M. Lesser, Thirty Years of Liquid Impact Research: A Tutorial Review, Wear, 1995, 186–187, p 28–34CrossRef

J.E. Field, J.P. Dear, and J.E. Ogren, The Effects of Target Compliance on Liquid Drop Impact, J. Appl. Phys., 1989, 65, p 540–553CrossRef

M.B. Lesser and J.E. Field, The Impact of Compressible Liquids, Annu. Rev. Fluid Mech., 1983, 15, p 97–122CrossRef

J.E. Field, ELSI, Conference: Invited Lecture Liquid Impact: Theory, Experiment, Applications, Wear, 1999, 233–235, p 1–12CrossRef

W.F Adler, Ed., Erosion: Prevention and Useful Applications, ASTM STP 664, Philadelphia, PA, 1979, 643 pp

J.E. Field, J.J. Camusa, M. Tinguely, D. Obreschkowc, and M. Farhat, Cavitation in Impacted Drops and Jets and the Effect on Erosion Damage Thresholds, Wear, 2012, 290–291, p 154–160CrossRef

J.M. Robinson and R.C. Reed, Water Droplet Erosion of Laser Surface Treated Ti-6Al-4V, Wear, 1995, 186–187, p 360–367CrossRef

R. Garcia and F.G. Hammitt, Cavitation Damage and Correlations with Material and Fluid Properties, J. Basic Eng., 1967, 89(4), p 753–763CrossRef

B.S. Mann, V. Arya, and P. Joshi, Advanced High-Velocity Oxygen Fuel Coating and Candidate Materials for Protecting LP Steam Turbine Blades against Droplet Erosion, J. Mater. Eng. Perform., 2005, 14(4), p 487–494CrossRef

10.

B.S. Mann, Boronizing of Cast Martensitic Chromium Nickel Stainless Steel and Its Abrasion and Cavitation—Erosion Behaviour, Wear, 1997, 208, p 125–131CrossRef

11.

B.S. Mann, V. Arya, B.K. Pant, and M. Agrawal, High-Power Diode Laser Surface Treatment to Minimize Droplet Erosion of Low-Pressure Steam Turbine Moving Blades, J. Mater. Eng. Perform., 2009, 18(7), p 990–998CrossRef

12.

B.S. Mann, V. Arya, and B.K. Pant, Enhanced Erosion Protection of TWAS Coated Ti6Al4V Alloy Using Boride Bond Coat and Subsequent Laser Treatment, J. Mater. Eng. Perform., 2011, 20(6), p 932–940CrossRef

13.

B.S. Mann, V. Arya, and B.K. Pant, Influence of Laser Power on the Hardening of Ti6Al4V Low Pressure Steam Turbine Blade Material for Enhancing the Water Droplet Erosion Resistance, J. Mater. Eng. Perform., 2011, 20(2), p 213–218CrossRef

14.

B.K. Pant, V. Arya, and B.S. Mann, Enhanced Droplet Erosion Resistance of Laser Treated Nano Structured TWAS and Plasma Ion-Nitro Carburized Coatings for High Rating Steam Turbine Components, J. Therm. Spray Technol., 2010, 19, p 884–892CrossRef

15.

B.S. Mann, High-Power Diode Laser Treated HP-HVOF and Twin Wire Arc Sprayed Coatings for Fossil Fuel Power Plants, J. Mater. Eng. Perform., 2013, 22(8), p 2191–2200

16.

B.S. Mann, V. Arya, and B.K. Pant, High Power Diode Laser Surface Treated HVOF Coating to Combat High Energy Particle Impact Wear, J. Mater. Eng. Perform., 2013, 22(7), p 1995–2004CrossRef

17.

B.S. Mann, V. Arya, and B.K. Pant, Cavitation Erosion Behaviour of HPDL-Treated TWAS Coated Ti6Al4V Alloy and Its Similarity with Water Droplet Erosion, J. Mater. Eng. Perform., 2012, 21(6), p 849–853

18.

B.S. Mann, Laser Treatment of Textured X20Cr13 Stainless Steel to Improve Water Droplet Erosion Resistance of LPST Blades and LP Bypass Valves, J. Mater. Eng. Perform., 2013 (Accepted)

19.

A. Lisiecki and A. Klimpel, Diode Laser Surface Modification of Ti6Al4V Alloy to Improve Erosion Wear Resistance, J. Achiev. Mater. Sci. Eng., 2008, 32(1), p 5–12

20.

Y.I. Oka and H. Miyata, Erosion Behaviour of Ceramic Bulk and Coating Materials Caused by Water Droplet Impingement, Wear, 2009, 267, p 1804–1810CrossRef

21.

M. Ahmad, M. Casey, and N. Surken, Experimental Assessment of Droplet Impact Erosion Resistance of Steam Turbine Blade Materials, Wear, 2009, 267, p 1605–1618CrossRef

22.

F.T. Cheng, K.H. Lo, and H.C. Man, NiTi Cladding on Stainless Steel by TIG Surfacing Process Part I. Cavitation Erosion Behavior, Surf. Coat. Technol., 2003, 172, p 308–315CrossRef

23.

F.T. Cheng, K.H. Lo, and H.C. Man, NiTi Cladding on Stainless Steel by TIG Surfacing Process Part II. Corrosion Behavior, Surf. Coat. Technol., 2003, 172, p 316–321CrossRef

24.

K.H. Lo, F.T. Cheng, C.T. Kwok, and H.C. Man, Improvement of Cavitation Erosion Resistance of AISI, 316 Stainless Steel by Laser Surface Alloying Using Fine WC Power, Surf. Coat. Technol., 2003, 165, p 258–267CrossRef

25.

C.T. Kwok, F.T. Cheng, and H.C. Man, Laser-Fabricated Fe-Ni-Co-Cr-B Austenitic Alloy on Steels. Part I. Microstructures and Cavitation Erosion Behaviour, Surf. Coat. Technol., 2001, 145, p 194–205CrossRef

26.

C.T. Kwok, F.T. Cheng, and H.C. Man, Laser-Fabricated Fe-Ni-Co-Cr-B Austenitic Alloy on Steels. Part II. Corrosion Behaviour and Corrosion-Erosion, Surf. Coat. Technol., 2001, 145, p 206–214CrossRef

27.

M. Duraiselvam, R. Galun, S. Siegmann, V. Wesling, and B.L. Mordik, Liquid Impact Erosion Characteristics of Martensitic Stainless Steel Laser Clad with Ni-Based Intermetallic Composites and Matrix Composites, Wear, 2006, 261, p 1140–1149CrossRef

28.

J.H. Brunton and M.C. Rochester, Erosion of Solid Surfaces by the Impact of Liquid Drops, Erosion, C.M. Preece, Ed., Academic Press, New York, 1979, p 185–248

29.

Y.I. Oka, S. Mihara, and H. Miyata, Effective Parameters for Erosion Caused by Water Droplet Impingement and Applications to Surface Treatment Technology, Wear, 2007, 263, p 386–394CrossRef

30.

S. Hattori and M. Takinami, Comparison of Cavitation Erosion Rate with Liquid Impingement Erosion Rate, Wear, 2010, 269, p 310–316CrossRef

31.

R.J. Hand and J.E. Field, Liquid Impact on Toughened Glasses, Eng. Fract. Mech., 1990, 37(2), p 293–311CrossRef

32.

J. Steller, International Cavitation Erosion Test and Quantitative Assessment of Material Resistance to Cavitation, Wear, 1999, 233–235, p 51–64CrossRef

33.

W.F. Adler, The Mechanisms of Liquid Impact, Erosion, C.M. Preece, Ed., Academic Press, New York, 1979, p 127–184

34.

F.J. Heymann, On Shock Wave Velocity and Impact Pressure in High Speed Liquid-Solid Impact, Trans. ASME J. Basic Eng., 1968, 90, p 400–402CrossRef

35.

R. Hiking, Transient, High-Pressure Solidification Associated with Cavitation in Water, Phys. Rev. Lett., 1994, 73, p 2853–2856CrossRef

Titel: Water Droplet and Cavitation Erosion Behavior of Laser-Treated Stainless Steel and Titanium Alloy: Their Similarities
Publikationsdatum: 01.12.2013
Erschienen in: Journal of Materials Engineering and Performance / Ausgabe 12/2013
Print ISSN: 1059-9495
Elektronische ISSN: 1544-1024
DOI: https://doi.org/10.1007/s11665-013-0660-6

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 12/2013

Static Recrystallized Grain Size of Coarse-Grained Austenite in an API-X70 Pipeline Steel

Effect of Continuous Cooling on Secondary Phase Precipitation in the Super Duplex Stainless Steel ZERON-100

Strain Aging of X100 Steel in Service and the Enhanced Susceptibility of Pipelines to Stress Corrosion Cracking

Dilution and Ferrite Number Prediction in Pulsed Current Cladding of Super-Duplex Stainless Steel Using RSM

Localized Corrosion Behavior of Al-Si-Mg Alloys Used for Fabrication of Aluminum Matrix Composites

Effect of Pyrolysis Temperature on Properties of Porous Si3N4-BN Composites Fabricated Via PIP Route

Premium Partner

Marktübersichten