Skip to main content
Erschienen in: Journal of Nondestructive Evaluation 1/2019

01.03.2019

Water Migration in One-Side Heated Concrete: 4D In-Situ CT Monitoring of the Moisture-Clog-Effect

verfasst von: Bartosz Powierza, Ludwig Stelzner, Tyler Oesch, Christian Gollwitzer, Frank Weise, Giovanni Bruno

Erschienen in: Journal of Nondestructive Evaluation | Ausgabe 1/2019

Einloggen

Aktivieren Sie unsere intelligente Suche um passende Fachinhalte oder Patente zu finden.

search-config
loading …

Abstract

Explosive spalling due to fire exposure in concrete structures can lead severe damage and, in the worst case, to premature component failure. For this reason, an in situ investigation of water migration in concrete due to surface heating was undertaken. During these experiments, a miniaturized concrete specimen within a confining and insulating double-hull was subjected to surface heating during simultaneous X-ray computed tomography (CT) scanning. Through the use of subtraction-based image analysis techniques, it was possible to observe and quantify not only drying within areas of the concrete matrix close to the heated surface, but also the migration of moisture to both pore and matrix regions deeper within the specimen. It was also discovered that the correction of CT images for specimen deformation using DVC and variable detector performance using calibrated image filters significantly improved the quality of the results. This clearly demonstrates the potential of X-ray CT for evaluation of other rapid-density-change phenomena in concrete and other building materials.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Literatur
1.
Zurück zum Zitat Kordina, K.: Planung unterirdischer Verkehrsanlagen gegen Brandgefahren. In: Tunnel (2004) Kordina, K.: Planung unterirdischer Verkehrsanlagen gegen Brandgefahren. In: Tunnel (2004)
2.
Zurück zum Zitat Kalifa, P., Chéné, G., Gallé, C.: High-temperature behaviour of HPC with polypropylene fibres From spalling to microstructure. Cem. Concr. Res. 31, 1487–1499 (2001)CrossRef Kalifa, P., Chéné, G., Gallé, C.: High-temperature behaviour of HPC with polypropylene fibres From spalling to microstructure. Cem. Concr. Res. 31, 1487–1499 (2001)CrossRef
3.
Zurück zum Zitat Jansson, R., Boström, L.: Fire spalling—the moisture effect. In: Dehn F., Koenders, E.A.B. (eds.) 1st International Workshop on Concrete Spalling due to Fire Exposure, Leipzig. pp. 120–129 (2009) Jansson, R., Boström, L.: Fire spalling—the moisture effect. In: Dehn F., Koenders, E.A.B. (eds.) 1st International Workshop on Concrete Spalling due to Fire Exposure, Leipzig. pp. 120–129 (2009)
4.
Zurück zum Zitat Van der Heijden, G.H.A., et al.: One-dimensional scanning of moisture in heated porous building materials with NMR. J. Magn. Reson. 208, 235–242 (2011)CrossRef Van der Heijden, G.H.A., et al.: One-dimensional scanning of moisture in heated porous building materials with NMR. J. Magn. Reson. 208, 235–242 (2011)CrossRef
5.
Zurück zum Zitat Weber, B., et al.: Neutron radiography of heated high-performance mortar. MATEC Web Conf. 6, 8 (2013)CrossRef Weber, B., et al.: Neutron radiography of heated high-performance mortar. MATEC Web Conf. 6, 8 (2013)CrossRef
6.
Zurück zum Zitat Toropovs, N., et al.: Real-time measurement of temperature, pressure and moisture profiles in high-performance concrete exposed to high temperatures during neutron radiography imaging. Cem. Concr. Res. 68, 166–173 (2015)CrossRef Toropovs, N., et al.: Real-time measurement of temperature, pressure and moisture profiles in high-performance concrete exposed to high temperatures during neutron radiography imaging. Cem. Concr. Res. 68, 166–173 (2015)CrossRef
7.
Zurück zum Zitat Powierza, B.: In-Situ CT observation of water migration in heated concrete. In: 3rd International Conference on Tomography of Materials and Structures, Lund, Sweden (2017) Powierza, B.: In-Situ CT observation of water migration in heated concrete. In: 3rd International Conference on Tomography of Materials and Structures, Lund, Sweden (2017)
8.
Zurück zum Zitat Stelzner, L., et al.: Analysis of moisture transport in unilateral-heated dense high-strength concrete. In: 5th International Workshop on Concrete Spalling due to Fire Exposure, Borås, Sweden (2017) Stelzner, L., et al.: Analysis of moisture transport in unilateral-heated dense high-strength concrete. In: 5th International Workshop on Concrete Spalling due to Fire Exposure, Borås, Sweden (2017)
9.
Zurück zum Zitat Masschaele, B., et al.: High-speed thermal neutron tomography for the visualization of water repellents, consolidants and water uptake in sand and lime stones. Radiat. Phys. Chem. 71(3–4), 807–808 (2004)CrossRef Masschaele, B., et al.: High-speed thermal neutron tomography for the visualization of water repellents, consolidants and water uptake in sand and lime stones. Radiat. Phys. Chem. 71(3–4), 807–808 (2004)CrossRef
10.
Zurück zum Zitat Hillenbach, A., et al.: High flux neutron imaging for high-speed radiography, dynamic tomography and strongly absorbing materials. Nucl. Instrum. Methods Phys. Res. Sect. A 542(1–3), 116–122 (2005)CrossRef Hillenbach, A., et al.: High flux neutron imaging for high-speed radiography, dynamic tomography and strongly absorbing materials. Nucl. Instrum. Methods Phys. Res. Sect. A 542(1–3), 116–122 (2005)CrossRef
11.
Zurück zum Zitat Martz, H.E., et al.: Computerized-tomography analysis of reinforced-concrete. ACI Mater. J. 90(3), 259–264 (1993) Martz, H.E., et al.: Computerized-tomography analysis of reinforced-concrete. ACI Mater. J. 90(3), 259–264 (1993)
12.
Zurück zum Zitat Morgan, I.L., et al.: Examination of concrete by computerized-tomography. J. Am. Concr. Inst. 77(1), 23–27 (1980) Morgan, I.L., et al.: Examination of concrete by computerized-tomography. J. Am. Concr. Inst. 77(1), 23–27 (1980)
13.
Zurück zum Zitat Flannery, B.P., et al.: Three-dimensional X-ray microtomography. Science 237(4821), 1439–1444 (1987)CrossRef Flannery, B.P., et al.: Three-dimensional X-ray microtomography. Science 237(4821), 1439–1444 (1987)CrossRef
14.
Zurück zum Zitat Feldkamp, L.A., Davis, L.C., Kress, J.W.: Practical cone-beam algorithm. J. Opt. Soc. Am. A 1(6), 612–619 (1984)CrossRef Feldkamp, L.A., Davis, L.C., Kress, J.W.: Practical cone-beam algorithm. J. Opt. Soc. Am. A 1(6), 612–619 (1984)CrossRef
15.
Zurück zum Zitat Landis, E.N., Nagy, E.N., Keane, D.T.: Microtomographic measurements of internal damage in portland-cement-based composites. J. Aerosp. Eng. 10(1), 2–6 (1997)CrossRef Landis, E.N., Nagy, E.N., Keane, D.T.: Microtomographic measurements of internal damage in portland-cement-based composites. J. Aerosp. Eng. 10(1), 2–6 (1997)CrossRef
16.
Zurück zum Zitat Asahina, D., Landis, E.N., Bolander, J.E.: Modeling of phase interfaces during pre-critical crack growth in concrete. Cem. Concr. Compos. 33(9), 966–977 (2011)CrossRef Asahina, D., Landis, E.N., Bolander, J.E.: Modeling of phase interfaces during pre-critical crack growth in concrete. Cem. Concr. Compos. 33(9), 966–977 (2011)CrossRef
17.
Zurück zum Zitat Poinard, C., et al.: Compression triaxial behavior of concrete: the role of the mesostructure by analysis of X-ray tomographic images. Eur. J. Environ. Civ. Eng. 16, S115–S136 (2012)CrossRef Poinard, C., et al.: Compression triaxial behavior of concrete: the role of the mesostructure by analysis of X-ray tomographic images. Eur. J. Environ. Civ. Eng. 16, S115–S136 (2012)CrossRef
18.
Zurück zum Zitat Oesch, T.S., Landis, E.N., Kuchma, D.A.: Conventional concrete and UHPC performance-damage relationships identified using computed tomography. J. Eng. Mech. 142(12), 531–538 (2016)CrossRef Oesch, T.S., Landis, E.N., Kuchma, D.A.: Conventional concrete and UHPC performance-damage relationships identified using computed tomography. J. Eng. Mech. 142(12), 531–538 (2016)CrossRef
19.
Zurück zum Zitat Oesch, T.S.: In-Situ CT investigation of pull-out failure for reinforcing bars embedded in conventional and high-performance concretes. In: 6th Conference on Industrial Computed Tomography (ICT), Wels, Austria: NDT.net (2016) Oesch, T.S.: In-Situ CT investigation of pull-out failure for reinforcing bars embedded in conventional and high-performance concretes. In: 6th Conference on Industrial Computed Tomography (ICT), Wels, Austria: NDT.net (2016)
20.
Zurück zum Zitat Paetsch, O., et al.: 3D corrosion detection in time-dependent CT images of concrete. In: Digital Industrial Radiology and Computed Tomography Conference, Ghent, Belgium (2015) Paetsch, O., et al.: 3D corrosion detection in time-dependent CT images of concrete. In: Digital Industrial Radiology and Computed Tomography Conference, Ghent, Belgium (2015)
21.
Zurück zum Zitat Yang, L., et al.: In-Situ tracking of water transport in cement paste using X-ray computed tomography combined with CsCl enhancing. Mater. Lett. 160, 381–383 (2015)CrossRef Yang, L., et al.: In-Situ tracking of water transport in cement paste using X-ray computed tomography combined with CsCl enhancing. Mater. Lett. 160, 381–383 (2015)CrossRef
22.
Zurück zum Zitat Boone, M.A., et al.: 3D mapping of water in oolithic limestone at atmospheric and vacuum saturation using X-ray micro-CT differential imaging. Mater. Charact. 97, 150–160 (2014)CrossRef Boone, M.A., et al.: 3D mapping of water in oolithic limestone at atmospheric and vacuum saturation using X-ray micro-CT differential imaging. Mater. Charact. 97, 150–160 (2014)CrossRef
23.
Zurück zum Zitat Yang, F., et al.: Visualization of water drying in porous materials by X-ray phase contrast imaging. J. Microsc. 261(1), 88–104 (2016)CrossRef Yang, F., et al.: Visualization of water drying in porous materials by X-ray phase contrast imaging. J. Microsc. 261(1), 88–104 (2016)CrossRef
24.
Zurück zum Zitat Wildenschild, D., et al.: Using X-ray computed tomography in hydrology: systems, resolutions, and limitations. J. Hydrol. 267(3), 285–297 (2002)CrossRef Wildenschild, D., et al.: Using X-ray computed tomography in hydrology: systems, resolutions, and limitations. J. Hydrol. 267(3), 285–297 (2002)CrossRef
25.
Zurück zum Zitat Wildenschild, D., et al.: Quantitative analysis of flow processes in a sand using synchrotron-based X-ray microtomography. Vadose Zone J. 4(1), 112–126 (2005)CrossRef Wildenschild, D., et al.: Quantitative analysis of flow processes in a sand using synchrotron-based X-ray microtomography. Vadose Zone J. 4(1), 112–126 (2005)CrossRef
26.
Zurück zum Zitat Dauti, D., et al.: Analysis of moisture migration in concrete at high temperature through in situ neutron tomography. Cem. Concr. Res. 111, 41–55 (2018)CrossRef Dauti, D., et al.: Analysis of moisture migration in concrete at high temperature through in situ neutron tomography. Cem. Concr. Res. 111, 41–55 (2018)CrossRef
27.
Zurück zum Zitat Schneider, U.: Compressive strength for service and accident conditions. Mater. Struct. 28(181), 410–414 (1995) Schneider, U.: Compressive strength for service and accident conditions. Mater. Struct. 28(181), 410–414 (1995)
28.
Zurück zum Zitat Kalifa, P., Menneteau, F.-D., Quenard, D.: Spalling and pore pressure in HPC at high temperatures. Papers presented at the symposium on transport properties and microstructure of cement-based systems, vol. 30, pp. 1915–1927 (2000)CrossRef Kalifa, P., Menneteau, F.-D., Quenard, D.: Spalling and pore pressure in HPC at high temperatures. Papers presented at the symposium on transport properties and microstructure of cement-based systems, vol. 30, pp. 1915–1927 (2000)CrossRef
29.
Zurück zum Zitat Feldkamp, L.A., Davis, L.C., Kress, J.W.: Practical cone-beam algorithm. J. Opt. Soc. Am. A 1(6), 612–619 (1984)CrossRef Feldkamp, L.A., Davis, L.C., Kress, J.W.: Practical cone-beam algorithm. J. Opt. Soc. Am. A 1(6), 612–619 (1984)CrossRef
30.
Zurück zum Zitat Rüegsegger, P., et al.: Standardization of computed tomography images by means of a material-selective beam hardening correction. J. Comput. Assist. Tomogr. 2(2), 184–188 (1978)CrossRef Rüegsegger, P., et al.: Standardization of computed tomography images by means of a material-selective beam hardening correction. J. Comput. Assist. Tomogr. 2(2), 184–188 (1978)CrossRef
31.
Zurück zum Zitat Weise, F., Onel, Y., Goebbels, J.: Analyse des Gefuge- und Feuchtezustandes in mineralischen Baustoffen mit der Rontgen-3D-Computertomografie. Bauphysik 29(3), 194–201 (2007)CrossRef Weise, F., Onel, Y., Goebbels, J.: Analyse des Gefuge- und Feuchtezustandes in mineralischen Baustoffen mit der Rontgen-3D-Computertomografie. Bauphysik 29(3), 194–201 (2007)CrossRef
32.
Zurück zum Zitat Bay, B.K., et al.: Digital volume correlation: three-dimensional strain mapping using X-ray tomography. Exp. Mech. 39(3), 217–226 (1999)CrossRef Bay, B.K., et al.: Digital volume correlation: three-dimensional strain mapping using X-ray tomography. Exp. Mech. 39(3), 217–226 (1999)CrossRef
33.
Zurück zum Zitat Roberts, B.C., Perilli, E., Reynolds, K.J.: Application of the digital volume correlation technique for the measurement of displacement and strain fields in bone: a literature review. J. Biomech. 47(5), 923–934 (2014)CrossRef Roberts, B.C., Perilli, E., Reynolds, K.J.: Application of the digital volume correlation technique for the measurement of displacement and strain fields in bone: a literature review. J. Biomech. 47(5), 923–934 (2014)CrossRef
34.
Zurück zum Zitat Alba, A., et al.: Phase correlation with sub-pixel accuracy: a comparative study in 1D and 2D. Comput. Vis. Image Underst. 137(Suppl C), 76–87 (2015)CrossRef Alba, A., et al.: Phase correlation with sub-pixel accuracy: a comparative study in 1D and 2D. Comput. Vis. Image Underst. 137(Suppl C), 76–87 (2015)CrossRef
35.
Zurück zum Zitat Foroosh, H., Zerubia, J.B., Berthod, M.: Extension of phase correlation to subpixel registration. Trans. Image Proc. 11(3), 188–200 (2002)CrossRef Foroosh, H., Zerubia, J.B., Berthod, M.: Extension of phase correlation to subpixel registration. Trans. Image Proc. 11(3), 188–200 (2002)CrossRef
36.
Zurück zum Zitat DIN, V., 1-2 Eurocode 2: Planung von Stahlbeton-und Spann-betontragwerken-Teil 1-2: Allgemeine Regeln-Tragwerksbemessung für den Brandfall, Ausgabe Dezember (2010) DIN, V., 1-2 Eurocode 2: Planung von Stahlbeton-und Spann-betontragwerken-Teil 1-2: Allgemeine Regeln-Tragwerksbemessung für den Brandfall, Ausgabe Dezember (2010)
Metadaten
Titel
Water Migration in One-Side Heated Concrete: 4D In-Situ CT Monitoring of the Moisture-Clog-Effect
verfasst von
Bartosz Powierza
Ludwig Stelzner
Tyler Oesch
Christian Gollwitzer
Frank Weise
Giovanni Bruno
Publikationsdatum
01.03.2019
Verlag
Springer US
Erschienen in
Journal of Nondestructive Evaluation / Ausgabe 1/2019
Print ISSN: 0195-9298
Elektronische ISSN: 1573-4862
DOI
https://doi.org/10.1007/s10921-018-0552-7

Weitere Artikel der Ausgabe 1/2019

Journal of Nondestructive Evaluation 1/2019 Zur Ausgabe

    Marktübersichten

    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.