Skip to main content

2018 | OriginalPaper | Buchkapitel

Welding Technology Analysis of Bypass Coupling Micro Plasma Welding

verfasst von : Jiankang Huang, Jing He, Ting Li, Shurong Yu, Yu Shi, Ding Fan

Erschienen in: Transactions on Intelligent Welding Manufacturing

Verlag: Springer Singapore

Aktivieren Sie unsere intelligente Suche um passende Fachinhalte oder Patente zu finden.

search-config
loading …

Abstract

The method of bypass coupling micro plasma welding was introduced, and used for the research of surfacing welding experiment. Different welding parameters were investigated, the thermal cycling curves were test, and the microstructure was observed. The result shows, with the increase of bypass current, the highest temperature of thermal cycling curves decreased and the microstructure was much fine. Therefore, we could speculate that the heat input to base metal is decreasing with the increase of bypass current. The bypass coupling micro plasma welding can achieve the accurate control of arc heat, balance the heat input to base metal and welding wire. Compared with traditional micro plasma welding, bypass coupling micro plasma welding can accurately control the heat input to base metal under the condition of constant heat input.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Springer Professional "Wirtschaft"

Online-Abonnement

Mit Springer Professional "Wirtschaft" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 340 Zeitschriften

aus folgenden Fachgebieten:

  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Versicherung + Risiko




Jetzt Wissensvorsprung sichern!

Literatur
1.
Zurück zum Zitat Manti R, Dwivedi DK, Agarwal A (2008) Pulse TIG welding of two Al-Mg-Si alloys. J Mater Eng Perform 17:667–673CrossRef Manti R, Dwivedi DK, Agarwal A (2008) Pulse TIG welding of two Al-Mg-Si alloys. J Mater Eng Perform 17:667–673CrossRef
2.
Zurück zum Zitat Kumar A, Sundarrajan S (2009) Optimization of pulsed TIG welding process parameters on mechanical properties of AA 5456 Aluminum alloy weldments. Mater Des 30:1288–1297CrossRef Kumar A, Sundarrajan S (2009) Optimization of pulsed TIG welding process parameters on mechanical properties of AA 5456 Aluminum alloy weldments. Mater Des 30:1288–1297CrossRef
3.
Zurück zum Zitat Giridharan PK, Murugan N (2009) Optimization of pulsed GTA welding process parameters for the welding of AISI 304L stainless steel sheets. Int J Adv Manufact Technol 40:478–489CrossRef Giridharan PK, Murugan N (2009) Optimization of pulsed GTA welding process parameters for the welding of AISI 304L stainless steel sheets. Int J Adv Manufact Technol 40:478–489CrossRef
4.
Zurück zum Zitat Silva CLMD, Scotti A (2006) The influence of double pulse on porosity formation in aluminum GMAW. J Mater Process Technol 171:366–372CrossRef Silva CLMD, Scotti A (2006) The influence of double pulse on porosity formation in aluminum GMAW. J Mater Process Technol 171:366–372CrossRef
5.
Zurück zum Zitat Zhang Z, Kong X (2012) Study on DC double pulse metal inert gas (MIG) welding of magnesium alloy. Mater Manufact Processes 27:462–466CrossRef Zhang Z, Kong X (2012) Study on DC double pulse metal inert gas (MIG) welding of magnesium alloy. Mater Manufact Processes 27:462–466CrossRef
6.
Zurück zum Zitat Zhang HT, Feng JC, He P (2008) Interfacial phenomena of cold metal transfer (CMT) welding of zinc coated steel and wrought aluminium. Mater Sci Technol 24(11):1346–1349CrossRef Zhang HT, Feng JC, He P (2008) Interfacial phenomena of cold metal transfer (CMT) welding of zinc coated steel and wrought aluminium. Mater Sci Technol 24(11):1346–1349CrossRef
7.
Zurück zum Zitat Feng J, Zhang H, He P (2009) The CMT short-circuiting metal transfer process and its use in thin aluminium sheets welding. Mater Des 30:1850–1852CrossRef Feng J, Zhang H, He P (2009) The CMT short-circuiting metal transfer process and its use in thin aluminium sheets welding. Mater Des 30:1850–1852CrossRef
8.
Zurück zum Zitat Lu Y, Chen SJ, Shi Y et al (2014) Double-electrode arc welding process: principle, variants, control and developments. J Manufact Process 16:93–108CrossRef Lu Y, Chen SJ, Shi Y et al (2014) Double-electrode arc welding process: principle, variants, control and developments. J Manufact Process 16:93–108CrossRef
9.
Zurück zum Zitat Li KH, Zhang YM, Xu P et al (2008) High-strength steel welding with consumable double-electrode gas metal arc welding. Weld J 87:57 Li KH, Zhang YM, Xu P et al (2008) High-strength steel welding with consumable double-electrode gas metal arc welding. Weld J 87:57
10.
Zurück zum Zitat Li KH, Chen JS, Zhang YM (2007) Double-electrode GMAW process and control. Weld J 86:231–237 Li KH, Chen JS, Zhang YM (2007) Double-electrode GMAW process and control. Weld J 86:231–237
11.
Zurück zum Zitat Zhang MX, Wu CS, Li KH et al (2007) FEA based prediction of weld dimension in new DE-GMAW process. Trans China Weld Inst 28:33–37 Zhang MX, Wu CS, Li KH et al (2007) FEA based prediction of weld dimension in new DE-GMAW process. Trans China Weld Inst 28:33–37
12.
Zurück zum Zitat Shi Y, Han RH, Fan D et al (2012) Numerical simulation of temperature field of DE-GMAW and its comparison with experimental measurements. Chin J Phys 61:1–7 Shi Y, Han RH, Fan D et al (2012) Numerical simulation of temperature field of DE-GMAW and its comparison with experimental measurements. Chin J Phys 61:1–7
13.
Zurück zum Zitat Shi Y, Wen JX, Huang JK et al (2011) Study on DE-GMAW MIG-brazing method for bonding steel with aluminum. Chin J Mech Eng-En 47:25–29CrossRef Shi Y, Wen JX, Huang JK et al (2011) Study on DE-GMAW MIG-brazing method for bonding steel with aluminum. Chin J Mech Eng-En 47:25–29CrossRef
14.
Zurück zum Zitat Lu LH, Fan D, Huang JK et al (2012) Decoupling control scheme for pulsed GMAW process of aluminum. J Mater Process Technol 212:801–807CrossRef Lu LH, Fan D, Huang JK et al (2012) Decoupling control scheme for pulsed GMAW process of aluminum. J Mater Process Technol 212:801–807CrossRef
15.
Zurück zum Zitat Li KH, Zhang YM (2008) Consumable DE-GMAW part 1: the process. Weld J 87:11–17 Li KH, Zhang YM (2008) Consumable DE-GMAW part 1: the process. Weld J 87:11–17
16.
Zurück zum Zitat Li KH, Zhang YM (2008) Consumable DE-GMAW part 2: monitoring, modeling, and control. Weld J 87:44–50CrossRef Li KH, Zhang YM (2008) Consumable DE-GMAW part 2: monitoring, modeling, and control. Weld J 87:44–50CrossRef
17.
Zurück zum Zitat Prasad KS, Rao CS, Rao DN (2011) Prediction of weld pool geometry in pulsed current micro plasma arc welding of SS304L stainless steel sheets. Int Trans J Eng Manage Appl Sci Technol 2:325–336 Prasad KS, Rao CS, Rao DN (2011) Prediction of weld pool geometry in pulsed current micro plasma arc welding of SS304L stainless steel sheets. Int Trans J Eng Manage Appl Sci Technol 2:325–336
18.
Zurück zum Zitat Urena A, Otero E, Utrilla MV et al (2007) Weldability of a 2205 duplex stainless steel using plasma arc welding. J Mater Process Technol 182:624–631CrossRef Urena A, Otero E, Utrilla MV et al (2007) Weldability of a 2205 duplex stainless steel using plasma arc welding. J Mater Process Technol 182:624–631CrossRef
19.
Zurück zum Zitat Huang JK, Yang MH, Li T et al (2016) The research on additive manufacturing by double electrode micro-plasma Arc welding. J Shanghai Jiaotong Univ 12:1906–1909 Huang JK, Yang MH, Li T et al (2016) The research on additive manufacturing by double electrode micro-plasma Arc welding. J Shanghai Jiaotong Univ 12:1906–1909
Metadaten
Titel
Welding Technology Analysis of Bypass Coupling Micro Plasma Welding
verfasst von
Jiankang Huang
Jing He
Ting Li
Shurong Yu
Yu Shi
Ding Fan
Copyright-Jahr
2018
Verlag
Springer Singapore
DOI
https://doi.org/10.1007/978-981-10-5355-9_6