Skip to main content
main-content

Tipp

Weitere Artikel dieser Ausgabe durch Wischen aufrufen

Erschienen in: Physics of Metals and Metallography 14/2021

18.08.2021 | STRUCTURE, PHASE TRANSFORMATIONS, AND DIFFUSION

Wire Arc Additive Manufacturing of Low-Carbon Mild Steel Using Two Different 3D Printers

verfasst von: Y. Ayan, N. Kahraman

Erschienen in: Physics of Metals and Metallography | Ausgabe 14/2021

Einloggen, um Zugang zu erhalten
share
TEILEN

Abstract

Additive manufacturing (AM) has gained prominence in the industrial sector due to its superior capability for fabricating small parts and meeting larger requirements in many fields. Among the AM processes, wire arc additive manufacturing (WAAM), which is commonly based on the welding process, is also a good option for manufacturing large-scale metallic components. In the present study, WAAM was performed using gas metal arc welding (GMAW). In addition, two customized 3D printers having different types of welding torch movements were used in the deposition process. Because it is generally preferred for joining works in the welding process, ER70S-6 filler wire was chosen for the WAAM. Two different parts were fabricated using this filler wire. The effects of the different torch movements on the properties of the WAAM samples were investigated via tensile and microhardness tests and microstructural examinations were performed. Moreover, the specimens were processed from three different material directions (horizontal, vertical, and 45°) in order to observe the layer effects. Following the WAAM process, optical emission spectrometry (OES) studies were conducted to evaluate the chemical composition of the parts. Visual inspection was then carried out to assess the layer features of the fabricated WAAM parts.
Literatur
34.
Zurück zum Zitat J. Prado-Cerqueira, A. Camacho, J. Diéguez, Á. Rodríguez-Prieto, A. Aragón, C. Lorenzo-Martín, and Á. Yanguas-Gil, “Analysis of favorable process conditions for the manufacturing of thin-wall pieces of mild steel obtained by Wire and Arc Additive Manufacturing (WAAM),” Materials 11, 1449 (2018). https://​doi.​org/​10.​3390/​ma11081449 CrossRef J. Prado-Cerqueira, A. Camacho, J. Diéguez, Á. Rodríguez-Prieto, A. Aragón, C. Lorenzo-Martín, and Á. Yanguas-Gil, “Analysis of favorable process conditions for the manufacturing of thin-wall pieces of mild steel obtained by Wire and Arc Additive Manufacturing (WAAM),” Materials 11, 1449 (2018). https://​doi.​org/​10.​3390/​ma11081449 CrossRef
35.
Zurück zum Zitat W. D. Callister and D. D. Rethwisch, Materials Science and Engineering: An Introduction (Wiley, Chichester, 2014). W. D. Callister and D. D. Rethwisch, Materials Science and Engineering: An Introduction (Wiley, Chichester, 2014).
Metadaten
Titel
Wire Arc Additive Manufacturing of Low-Carbon Mild Steel Using Two Different 3D Printers
verfasst von
Y. Ayan
N. Kahraman
Publikationsdatum
18.08.2021
Verlag
Pleiades Publishing
Erschienen in
Physics of Metals and Metallography / Ausgabe 14/2021
Print ISSN: 0031-918X
Elektronische ISSN: 1555-6190
DOI
https://doi.org/10.1134/S0031918X21140039

Weitere Artikel der Ausgabe 14/2021

Physics of Metals and Metallography 14/2021 Zur Ausgabe