Skip to main content
Fachgebiete
Automobil + Motoren Bauwesen + Immobilien Business IT + Informatik Elektrotechnik + Elektronik Energie + Nachhaltigkeit Finance + Banking Management + Führung Marketing + Vertrieb Maschinenbau + Werkstoffe Versicherung + Risiko
DE
EN
Bücher
Zeitschriften
Themenseiten
Organisationspsychologie Projektmanagement Marketing Smart Manufacturing
Weitere Formate
Podcasts Webinare Technik Webinare Wirtschaft Kongresse Veranstaltungskalender Awards
Jetzt Einzelzugang starten
Zugang für Unternehmen
Referenzkunden
SLX-Digitalkonferenz: Zukunftswerkstatt 2024

Mehr Umsatz mit Top-Kontakten

Am 7. Mai erfahren Sie, wie Vertriebsteams Leadgenerierung, Leadnurturing und Leadstrategien effizient steuern können.
Erweiterte Suche
Anmelden
nach oben
Erschienen in:
Kurzbeschreibung Kapitel lesen Erstes Kapitel lesen

2021 | OriginalPaper | Buchkapitel

2. Wissenschaftlicher und technischer Stand zu Beginn des Vorhabens

verfasst von : Heiko Assing, Thanh Nam Le, Robert Stranz, Benjamin Reil, Knut Böttcher, Martin Hillebrecht, Ulrich Berges, Carsten Jatzen, Tobias Reincke, Sven Hartwig, Klaus Dilger, Albert Sedlmaier, Thomas Dietl, Andreas Wedemeier, Benjamin Poller

Erschienen in: Thermoplastische, rollgeformte Profile in Hybridbauweise 2 - TroPHy2

Verlag: Springer Berlin Heidelberg

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config
loading …

Zusammenfassung

Kap. 2 präsentiert den Stand der Technik zu hybriden Werkstoffen. Nach einer kurzen Einführung (Abschn. 2.1.1) zu allgemeinen Anwendungen von Hybridlaminaten stellen die teilnehmenden Partner ihre projektrelevanten laufenden oder bereits abgeschlossenen Forschungsarbeiten vor (Abschn. 2.1.2). Grundlegende Aspekte, die das Projekt TroPHy2 im Folgenden berücksichtigt, sind die Fügetechnik (Abschn. 2.1.3), die Anbindung zwischen Faserkunststoffverbunden (FKV) und Metallen (Abschn. 2.1.4) und das Eigenspannungs- sowie Verformungsverhalten in Hybridlaminaten (Abschn. 2.1.5). Recherchen zu Simulationsmethoden (Abschn. 2.1.6) sowie die Fertigung von Hybridlaminaten (Abschn. 2.1.7) insbesondere im Rollformverfahren (Abschn. 2.1.8) liefern weiteren wichtigen Input für das Projekt.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Jetzt informieren
Vorheriges Kapitel Kurzbeschreibung
Nächstes Kapitel Planung und Ablauf des Vorhabens
Literatur
1.
2.
3.
Jäschke A, Dajek U (2004) Dachrahmen in Hybridbauweise. VDI-Tagungsband Nr. 4260:25–45. VDI, Düsseldorf
4.
5.
6.
7.
Van Roojnen R, Sinke J, De Vries TJ, Van Der Zwaag S (2004) Property optimisation in fibre metal laminates. Appl Compos Mater 11(2):63–76CrossRef
8.
Sinmazcelik T, Avcu E, Özgür Bora M, Coban O (2011) A review: fibre metal laminates, background, bonding types and applied test methods. Mater Des 32(7):3671–3685CrossRef
9.
Park SY, Choi WJ, Choi HS (2010) A comparative study on the properties of GLARE laminates cured by autoclave and autoclave consolidation followed by oven postcuring. Int J Adv Manuf Technol 49(5–8):605–613CrossRef
10.
Sinke J (2003) Manufacturing of GLARE parts and structures. Appl Compos Mater 10(4–5):293–305CrossRef
11.
Subbaramaiah R, Lim SH, Prusty BG, Pearce G, Kelly D, Thompson R (2013) Rubber pad forming of GLARE cruciform using numerical and experimental analysis. In: ICCM19 the 19th international conference on composite materials, Montreal
12.
Djokic D, Johnston A, Rogers A, Lee-Sullivan P, Mrad N (2002) Residual stress development during the composite patch bonding process: measurement and modeling. Compos A: Appl Sci Manuf 33(2):277–288CrossRef
13.
Hagenbeek M, van Hengel C, Bosker OJ, Vermeeren CAJR (2003) Static properties of fibre metal laminates. Appl Compos Mater 10(4–5):207–222CrossRef
14.
Hofslagere P (2003) Residual stress measurement on fibre-metal-lamintes. J Neutron Res 11(4):215–220CrossRef
15.
Jumbo FS, Ashcroft IA, Crocombe AD, Abdel Wahab MM (2010) Thermal residual stress analysis of epoxy bi-material laminates and bonded joints. Int J Adhes Adhes 30(7):523–538CrossRef
16.
Khan SU, Alderliesten RC, Benedictus R (2009) Post-stretching induced stress redistribution in fibre metal laminates for increased fatigue crack growth resistance. Compos Sci Technol 69(3–4):396–405CrossRef
17.
Kim HS, Park SW, Hwang HY, Lee DG (2006) Effect of the smart cure cycle on the performance of the co-cured aluminium/composite hybrid shaft. Compos Struct 75(1–4):276–288CrossRef
18.
Kim HS, Park SW, Lee DG (2006) Smart cure cycle with cooling and reheating for co-cure bonded steel/carbon epoxy composite hybrid structures for reducing thermal residual stress. Compos A: Appl Sci Manuf 37(10):1708–1721CrossRef
19.
Xue J, Wang W-X, Takao Y, Matsubara T (2011) Reduction of thermal residual stress in carbon fiber aluminum laminates using a thermal expansion clamp. Compos A: Sci Manuf 42(8):986–992CrossRef
20.
Yu Y, Ashcroft IA, Swallow G (2006) An experimental investigation of residual stresses in an epoxy-steel laminate. Int J Adhes Adhes 26:511–519CrossRef
21.
Lin CT, Kao PW (1995) Effect of fiber bridging on the fatigue crack propagation in carbon fiber-reinforced aluminum laminates. Mater Sci Eng 190(1–2):65–73CrossRef
22.
Wang W-X, Takao Y, Matsubara T (2007) Galvnic corrosion-resistant carbon fiber metal-laminates. In: 16th international conference on composite materials, Kyoto, Japan, S 1–10
23.
Silva DF, Botelho EC, Ancelotti AC, Damato CA (2013) Environmental conditioning effects on the mechanical properties of titanium fiber-metal-laminates. In: ICCM19 – the 19th international conference on composite materials, Montreal
24.
Kolesnikov B, Stefaniak D, Wölper J, Hühne C (2012) Adaptive, tolerant and efficient composite structures. In: Wiedemann M, Sinapius M (Hrsg) Fibre-metal-laminate-laminate struts. Springer-Verlag, Berlin/Heidelberg, S 263–274
25.
Kolesnikov B, Fink A, Hühne C, Stefaniak D, Borgwardt H (2010) Strukturelement aus einem Hybridlaminat. DE102010035324A1, Patentschrift
26.
Stefaniak D, Fink A, Kolesnikov B, Hühne C (2011) Improving the mechanical performance of CFRP by metal-hybridization. In: ICCS16 – 16th international conference on composite structures, Porto
27.
Stefaniak D, Kolesnikov B, Kappel E, Hühne C (2012) Improving impact endangered CFRP structures by metal-hybridisation. In: 12th European conference on spacecraft structues, materials & environmental testing, Nordwijk, Netherlands
28.
Stefaniak D, Kappel E, Kolesnikov B, Hühne C (2012) Improving the mechanical performance of unidirectional CFRP by metal-hybridization. In: ECCM15 – 15th European conference on composite materials, Venice, Italy
29.
30.
31.
32.
33.
34.
Herrmann A, Friedrich M, Klein-Lassek M (2006) AUTO-RTM – highly automated process chain for the production of carbon-fiber reinforced components. In: DELMIA European user conference, Fellbach
35.
36.
Rudolf R (2000) Entwicklung einer neuartigen Prozess- und Anlagentechnik zum wirtschaftlichen Fügen von thermoplastischen Faser-Kunststoff-Verbunden, Dissertation. Band10, Kaiserslautern: Prof. Dr.-Ing. M. Neitzel (Hrsg.), Institut für Verbundwerkstoffe GmbH, Technische Universität Kaiserslautern
37.
Golde HD (1995) Ultraschall-Metallschweißen: Funktionsweise und Anwendung einer hochwertigen Verbindungstechnik. Verlag Moderne In-dustrie, Landsberg/Lech
38.
Balle F (2009) Ultraschallschweißen von Metall/C-Faser-Kunststoff (CFK) – Verbunden, Dissertation. Band 22, Kaiserslautern: Prof. Dr.- Ing.habil. D. Eifler (Hrsg.), Lehrstuhl für Werkstoffkunde, Technische Universität Kaiserslautern
39.
Krüger S, Wagner G, Eifler D (2004) Ultrasonic welding of metal/composite joints. Adv Eng Mater 6(3, Weinheim: Wiley-VCH Verlag):157–159CrossRef
40.
Wagner G, Roeder E, Wagner J, Woltersdorf J, Pippel E (1995) Interlayer mi-crostructure and bonding behaviour of ultrasonic-welded aluminium oxid/aluminium joints. Phys Status Solidi (a) Jahrg 150(2, Weinheim: Wiley-VCH Verlag):307–317
41.
Ehrenstein GW (2006) Faserverbundkunststoffe, Werkstoffe – Verarbeitung – Eigenschaften, 2., völlig überarbeitete Aufl. Carl Hanser Verlag, München
42.
Velthuis R (2007) Induction welding of fiber reinforced thermoplastic polymer composites to metal, Dissertation. Band 75, Kaiserslautern: Prof. Dr.-Ing. A. K. Schlarb (Hrsg.), Institut für Verbundwerkstoffe, Technische Universität Kaiserslautern
43.
Schmeer S (2009) Experimentelle und simulative Analysen von induktionsge-schweißten Hybridverbindungen, Dissertation. Band 89, Kaiserslautern: Prof. Dr.-Ing. P. Mitschang (Hrsg.), Institut für Verbundwerkstoffe GmbH, Techni-sche Universität Kaiserslautern
44.
Ehrenstein GW (2004) Handbuch Kunststoff-Verbindungstechnik. Carl Hanser Verlag, München, S 179–196
45.
Flock D (2011) Wärmepressfügen hybrider Kunststoff-Metall-Verbindungen, Dissertation. Rheinisch Westfälische Technische Hochschule Aachen
46.
De Baere I, Van Paepegem W, Degrieck J (2012) Feasibility study of fusion bonding for carbon fabric reinforced polyphenylene sulphide by hot-tool welding. Journal of Thermoplastic Composite Materials 25(2):135–151
47.
Baldan A (2004) Review adhesively-bonded joints and repairs in metallic alloys, polymers and composite materials: adhesives, adhesion theories and surface pretreatment. J Mater Sci 39:1–49CrossRef
48.
Habenicht G (2006) Kleben. Springer, Berlin
49.
Rider A, Shum IWE, Mirabella L (2005) Environmental durability trial of bonded composite repairs to metallic aircraft structures. DSTO Platforms Sciences Laboratory, Australia
50.
Blohowiak KY, Osborne JH, Krienke KA (1999) A surface pretreatment of metals to activate the surface for sol-gel coating. US005869140, Patentschrift
51.
Davis M, Bond D (1999) Principles and practices of adhesive bonded structural joints and repairs. Int J Adhes Adhes 99(2–3):91–105CrossRef
52.
Molitor P, Barron V, Young T (2001) Surface treatment of titanium for adhesive bonding to polymer composites: a review. Int J Adhes Adhes 21(2):129–136CrossRef
53.
Harris AF, Beevers A (1999) The effects of grit-blasting on surface properties for adhesion. Int J Adhes Adhes 19(6):445–452CrossRef
54.
McCombe GP, Etches JA, Mellor PH, Bond IP (2011) Development of a ferromagnetic fibre metal laminate. Compos A: Sci Manuf 42(10):1380–1389CrossRef
55.
Covino BS (1984) Information circular 8985, chapter pickling of stainless steels – a review. United States Department of Interieur, Bureau of Mines, Washington, DC
56.
Covino BS, Scalera JV, Driscoll TJ, Carter JP (1986) Dissolution behaviour of 304 stainles steel in HNO3/HF mixtures. Metall Mater Trans A 17(1):137–149CrossRef
57.
Schmitz A, Sen Gupta D, Peter H (1999) Verfahren zum Beizen von Werkstücken aus hochlegierten Werkstoffen. DE4417284 C2, Patentschrift
58.
Honkanen M (2011) Injection-molded hybrids – characterization of metal-plastic interfacial features. PhD thesis, Tampere University of Technology
59.
Honkanen M, Vippola M, Lepistö T (2011) Characterisation of stainless steel surfaces – modified in air at 350 °C. Surf Eng 27(5):325–331
60.
Mazza JJ (2004) Sol-gel technology for low-VOC, Nonchromated adhesive bonding applications SERDP project PP-1113, Task 1. Storming Media, New York
61.
Oliver MS, Blohowiak KY, Dauskardt RH (2008) Reliability of adhesive interphases for titanium-graphite laminates. In: SAMPE 2008, Long Beach, CA
62.
Wong JT (2012) Evaluation of titanium bonding surface preparation method: sol-gel AC-130-2. In: American Helicopter Society 68th annual forum, Fort Worth, Texas
63.
Zheludkevich ML, Miranda Salvado I, Ferreira MGS (2005) Sol-gel coatings for corrosion protection of metals. J Mater Chem 15:5099–5111CrossRef
64.
Niederberger M, Pinna N (2009) Metal oxide nanoparticles in organic solvents. Springer-Verlag, Berlin/Heidelberg. [48] Kominar V (1996) Thermo-mechanical regulation of residual stresses in polymers and polymer composites. J Compos Mater 30(3):406–415CrossRef
65.
Ruiz E, Trochu F (2005) Numerical analysis of cure temperature and internal stresses in thin and thick RTM parts. Compos A: Appl Sci Manuf 36(6):806–826CrossRef
66.
Cowley KD, Beaumont PWR (1997) The measurement and prediction of residual stresses in carbon-fibre/polymer composites. Compos Sci Technol 57(1):1445–1455CrossRef
67.
Gigliotti M, Wisnom MR, Potter KD (2003) Development of curvature during the cure of AS4/8552 [0/90] unsymmetric composite plates. Compos Sci Technol 63(2):187–197CrossRef
68.
Gigliotti M, Jaquemin F, Vautrin A (2005) On the maximum curvatures of 0/90 plates under thermal stress. Compos Struct 68(2):177–184CrossRef
69.
Kappel E, Stefaniak D, Hühne C (2012) Adaptive, tolerant and efficient composite structures. In: Wiedemann M, Sinapius M (Hrsg) Chapter about the spring-in phenomenon: quantifying the effects of thermal expansion and chemical shrinkage. Springer-Verlag, Berlin/Heidelberg
70.
Kappel E, Stefaniak D, Hühne C (2013) Process distortions in prepreg manufacturing – an experimental study on CFRP L-profiles. Compos Struct 106:615–625
71.
Kappel E (2013) Distortions in composite manufacturing – from an experimental characterization to a prediction approach for the global scale. PhD thesis, Otto von Guericke University Magdeburg
72.
Radford DW, Rennick TS (2000) Seperating sources of manufacturing distortion in laminated composites. J Reinf Plast Compos 19(8):621–641CrossRef
73.
Albert C, Fernlund G (2002) Spring-in and warpage of angled composite laminates. Compos Sci Technol 62(14):1895–1912CrossRef
74.
Svanberg JM (2002) Predictions of manufacturing induced shape distortions- high performance thermoset composites. PhD thesis, Lulea University of Techology, Lulea University of Technilogy, Sweden
75.
Wisnom MR, Gigliotti M, Ersoy N, Campbell M, Potter KD (2006) Mechanisms generating residual stresses and distortion during manufacture of polymer-matrix composite structures. Compos A: Appl Sci Manuf 37(4):522–529CrossRef
76.
Arafath ARA, Vaziri R, Poursartip A (2008) Closed-form solution for process-induced stresses and deformation of a composite part cured on a solid tool: part I – flat geometries. Compos A: Appl Sci Manuf 39(7):1106–1117CrossRef
77.
Arafath ARA, Vaziri R, Poursartip A (2009) Closed-form solution for process-induced stresses and deformation of a composite part cured on a solid tool: part II – curved geometries. Compos A: Appl Sci Manuf 40(10):1545–1557
78.
Radford DW (2010) Balancing mechanisms of distortion to yield distortion-free/shape stable composites. J Reinf Plast Compos 29(12):1875–1892CrossRef
79.
Stefaniak D, Kappel E, Spröwitz T, Hühne C (2012) Experimental identification of process parameters inducing warpage of autoclave-processed CFRP parts. Compos A: Appl Sci Manuf 43(7):1081–1091CrossRef
80.
Rohwer K, Kappel E, Stefaniak D, Wille T (2012) Spring-in and warpage – progess in simulating manufacturing aspects. In: Seventeenth international conference – mechanics of composite materials, Riga, Latvia
81.
Garstka T, Ersoy N, Potter KD, Wisnom MR (2007) In situ measurements of through-the-thickness strains during processing AS4/8552 composite. Compos A: Appl Sci Manuf 38(12):2571–2526CrossRef
82.
Hubert P, Poursartip A (2001) A method for the direct measurement of the fibre bed compaction curve of composite prepregs. Compos A: Appl Sci Manuf 32(2):179–187CrossRef
83.
Fernlund G, Poursartip A, Twigg G, Albert C (2003) Residual stress, spring-in and warpage in autoclaved composite parts. In: 14th International Conference on Composite Materials (ICCM-14), San Diego, CA, USA, 14–18 July
84.
Twigg G, Poursartip A, Fernlund G (2003) An experimental method for quantifying tool-part shear interaction during composite processing. Compos Sci Technol 63(13):1985–2002CrossRef
85.
Twigg G, Poursartip A, Fernlund G (2004) Tool-part interaction in composites processing. Part I: experimental investigation and analytical model. Compos A: Appl Sci Manuf 35(1):121–133CrossRef
86.
Larberg YR, Akermo M (2011) On the interply friction of different generations of carbon/epoxy prepreg systems. Compos A: Appl Sci Manuf 42(9):1067–1074CrossRef
87.
Martin CJ, Seferis JC (1996) Frictional resistance of thermoset prepregs and its influence on honeycomb composites processing. Compos A: Appl Sci Manuf 27(10):943–951CrossRef
88.
de Oliveira R, Lavanchy S, Chatton R, Constantini D, Michaud V, Salathé R, Manson J-AE (2008) Experimental investigation of the effect of the mould thermal expansion on the development of internal stresses during carbon fibre composite processing. Compos A: Appl Sci Manuf 39(7):1083–1090CrossRef
89.
Ersoy N, Potter K, Wisnom MR, Clegg MJ (2005) An experimental method to study the frictional process during composites manuacturing. Compos A: Appl Sci Manuf 36(11):1536–1544CrossRef
90.
Ersoy N, Potter K, Wisnom MR, Clegg MJ (2005) Development of spring-in angle during cure of a thermosetting composite. Compos A: Appl Sci Manuf 36(12):1700–1706CrossRef
91.
Kaushik V, Raghavan J (2010) Experimental study of tool-part interaction during autoclave processing of thermoset polymer composite structures. Compos A: Appl Sci Manuf 41(9):1210–1218CrossRef
92.
Zheng X, Raghavan J (2010) Role of tool-part interaction in process-induced warpage of autoclave-manufactured composite structures. Compos A: Appl Sci Manuf 41(9):1174–1183CrossRef
93.
Kappel E, Stefaniak D, Spröwitz T, Hühne C (2011) A semi-analytical simulation strategy and its application to warpage of autoclave-processed CFRP parts. Compos A: Appl Sci Manuf 42(12):1985–1994CrossRef
94.
Khoun L, de Oliveira R, Michaud V, Hubert P (2011) Investigation of process-induced strains development by fibre Bragg grating sensors in resin transfer moulded composites. Compos A: Appl Sci Manuf 42(3):274–282CrossRef
95.
White SR, Hahn HT (1993) Cure cycle optimization for the reduction of precessing-induced residual stresses in composite materials. J Compos Mater 27(14):1352–1378CrossRef
96.
Yi S, Hilton HH (1998) Effects of thermo-mechanical properties of composites on viscosity, temperature and degree of cure in thick thermosetting composite laminates during curing process. J Compos Mater 32(7):600–614CrossRef
97.
Kim HS, Lee DG (2006) Avoidance of fabricational thermal residual stresses in co-cure bonded metal-composite hybrid structures. J Adhes Sci Technol 20(9):959–997CrossRef
98.
Ersoy N, Garstka T, Potter K, Wisnom MR, Porter D, Clegg M, Stringer G (2010) Development of the properties of a carbon fibre reinforced thermosetting composite through cure. Compos A: Appl Sci Manuf 41(3):401–409CrossRef
99.
Fernlund G, Rahman N, Courdji R, Bresslauer M, Poursartip A, Willden K, Nelson K (2002) Experimental and numerical study of the effect of cure cycle, tool surface, geometry, and lay-up on the dimensional fidelity of autoclave-processed composite parts. Compos A: Appl Sci Manuf 33(3):341–351CrossRef
100.
Buhl J. Umformverhalten und Grenzen von Schichtverbundwerkstoffen, Dissertation. ISBN 978-3-8440-2822-5
101.
Sun J, Gu Y, Li M, Ma X, Zhang Z (2012) Effect of forming temperature on the quality of hot diaphragm formed C-shaped thermosetting composite laminates. J Reinf Plast Compos 31:1074–1087CrossRef
102.
Sun J, Gu YZ, Li M, Li YX, Zhang ZG (2013) Relationship between slipping friction of prepreg stacks and forming quality of hot diaphragm formed C-shaped thermosetting composite laminates. In: ICCM19 the 19th international conference on composite materials, Montreal
103.
Tucker C (1997) Forming of advanced composites. Adv Compos Manuf. ISBN: 978-0-471-15301-6
104.
Pandey RK, Sun CT (1999) Mechanism of wrinkle formation during the processing of composite laminates. Compos Sci Technol 59:403–417CrossRef
105.
Lightfoot JS, Wisnom MR, Potter K (2013) A new mechanism for the formation of ply wrinkles due to shear between plies. Compos A: Sci Manuf 49(1):139–147CrossRef
106.
Akermo M, Larberg YR, Sjölander J, Hallander P (2013) Influence of interply friction on the forming of stacked UD prepreg. In: ICCM19 the 19th international conference on composite materials, Montreal
107.
Engel B, Selter O (2011) Potentiale und Fertigungsstrategien zur geometrischen Gestaltung von Profilbauteilen. UTF Sci III:1–30
108.
Geyer S, Stricker N, Schmoeckel D (Hrsg) (1994) Innovative Fertigungs- und Planungssysteme für den Walzprofilieren, Neue Perspektiven für die Umformtechnik, Bd 5, Heft 16. IFB und PTU, Darmstadt
109.
Nilsen T, Normann E (1986) Machine for adjustable longitudinal corrugation of sheet Materials. PTC-Patent WO 00 198 7004 375 A1, Blommenholm, 17 January
110.
Sedlmaier A (2014) Simulation of roll forming process of 3D chassis long member and its industrial application. In: IDDRG conference, Paris, 1–4 June
111.
Hennig R, Sedlmaier A, Abee A. Fabrication of load optimized truck members with variable cross sections by flexible roll forming. In: SCT2011 the 3rd international conference on steels in cars and trucks, 2011 – future trends in steel development, processing technologies and applications, 5–9 June, Salzburg, Austria, Verlag Stahleisen GmbH, Düsseldorf
112.
Hennig R, Sedlmaier A (2011) Henry Wolfkamp, Bernard Rolfe, Matthias Weiss: understanding the shape defects in roll forming using a novel material characterising method. In: The 17th international symposium on plasticity and its current applications, CasaMagna Marriot Puerto Vallarta, Mexico, 3–8 January
113.
Sedlmaier A, Hennig R, Abee A (2010) Making tubes with discontinuous cross sections by means of 3D roll forming. pipe & tube Pittsburgh 2010. In: Technology for profitable production; TPA and ITA conference, Holiday Inn Pittsburgh Airport, USA, 3–5 October
114.
Sedlmaier A (2010) Development of roll forming applications by means of numerical analysis as a part of quality control. In: Cold rolled event by confederation of British metal forming, Birmingham, UK, 23 June
115.
Guitierrez MA (Proform Coordinator), Labein-Tecnalia I, Eguia (Proform EMF Leader), Labein-Tecnalia S, Berner (Proform Roll Forming Leader) PtU, Hennigs C (Proform Laser Leader) LZH, Sedlmaier A (Proform Control Leader) data M Sheet Metal Solutions, Agnello A (Proform Validation Leader) Centro Ricerche Fiat, Bahillo J (Proform Integration Leader) Ingemat (2010) PROFORM: Profile Forming Innovation. In: IDDRG 50th anniversary conference „tools and technologies for the processing of ultra high strength steels“, Graz, Austria, 31 May–02 June, ISBN 978-3-85125-108-1
116.
Poks B, Dietl T, Sedlmaier A (2009) Computer control for roll forming of profiles with discontinuous cross sections – 1st international congress on roll forming, Bilbao, 14–15 October, ISBN 978-84-88734-03-7
117.
Sedlmaier A, Abee A (2009) On the quality improvement of roll formed profiles with variable cross sections. In: PLASTICITY 2009 – international symposium on plasticity, Frenchman’s Reef and Morning Star Marriott Beach Resort, 3–8 January
118.
Abee A, Berner S, Sedlmaier A (2008) Accuracy improvement of roll formed profiles with variable cross sections. In: ICTP 2008 – 9th international conference on technology of plasticity, Hotel Hyundai, Gyeongju, Korea, 7–11 September
119.
Ingvarsson L, Rudmann L (2008) Vorrichtung und Verfahren zum Rollformen, EP 1 661 636 B1/DE 000 060 132 646 T2, Firma Ortic 3D AB, Borlänge, Schweden, 23 January
120.
Ingvarsson L, Rudman L (2002) A roll forming machine, WO 002 002 043 886 A1, Firma Ortic AB, Borlänge, Schweden, 06 June
121.
Wedemeier A, Istrate A, Elvenkemper A, Kötter J, Groche P, Beiter P, Vietor T, Nehuis F (2012) Entwicklung einer hoch integrierten Profilbaukastenfamilie für den Automotive- und Transportsektor aus höher- und höchstfesten Mehrphasenstählen mit belastungsangepassten Blechdickenverläufen: HI-PAT; Schlussbericht zum gleichnamigen Forschungsvorhaben; Förderkennzeichen 03X3025. Salzgitter
122.
Anbari B, Finet S (2005) Outil de formage pour la fabrication dún profilé, machine àprofilier, utilisation et élèment correspondant, EP 000 001 627 697 B1, Firma Wagon Automotive S.A., Poissy, 08 August
Metadaten
Titel
Wissenschaftlicher und technischer Stand zu Beginn des Vorhabens
verfasst von
Heiko Assing
Thanh Nam Le
Robert Stranz
Benjamin Reil
Knut Böttcher
Martin Hillebrecht
Ulrich Berges
Carsten Jatzen
Tobias Reincke
Sven Hartwig
Klaus Dilger
Albert Sedlmaier
Thomas Dietl
Andreas Wedemeier
Benjamin Poller
Copyright-Jahr
2021
Verlag
Springer Berlin Heidelberg
Buch
Thermoplastische, rollgeformte Profile in Hybridbauweise 2 - TroPHy2

Print ISBN: 978-3-662-62354-1

Electronic ISBN: 978-3-662-62355-8

Copyright-Jahr: 2021

DOI
https://doi.org/10.1007/978-3-662-62355-8_2

    Premium Partner

    Bildnachweise