Ausgabe 6/2021
Inhalt (16 Artikel)
Comparative studies on the durability and moisture performance of wood modified with cyclic N-methylol and N-methyl compounds
- Open Access
- Original
Lukas Emmerich, Alexander Ehrmann, Christian Brischke, Holger Militz
Three-dimensional numerical and experimental study of fracture saturation in panel paintings
- Open Access
- Original
Mohammad Yaghoub Abdollahzadeh Jamalabadi, Noemi Zabari, Łukasz Bratasz
Experimental study on crack initiation and propagation of wood with LT-type crack using digital image correlation (DIC) technique and acoustic emission (AE)
- Original
Juncheng Tu, Dong Zhao, Jian Zhao, Qi Zhao
Performance assessment of modal parameters identification methods for timber structures evaluation: numerical modeling and case study
- Original
Seif Eddine Hamdi, Zoubir Mehdi Sbartaï, Sidi Mohammed Elachachi
Study of acoustic emission propagation characteristics and energy attenuation of surface transverse wave and internal longitudinal wave of wood
- Original
Ming Li, Minghua Wang, Rui Ding, Tingting Deng, Saiyin Fang, Fei Lai, Ruihan Luoi
Comparison of fracture morphologies of ring shake surface and shear surface in Dahurian larch
- Original
Seong Hyun Kim, Byantara Darsan Purusatama, Jong Ho Kim, Intan Fajar Suri, Go Un Yang, Seung Hwan Lee, Fauzi Febrianto, Nam Hun Kim
Cork influenced by a specific water regime—macro and microstructure characterization: the first approach
- Original
Ana Patrícia Poeiras, Maria Emília Silva, Björn Günther, Cordula Vogel, Peter Surový, Nuno de Almeida Ribeiro
Segmented bio-based polyurethane composites containing powdered cellulose obtained from novel bio-based diisocyanate mixtures
- Open Access
- Original
Ewa Głowińska, Paulina Kasprzyk, Janusz Datta
Flexible cellulose-based material with a higher conductivity and electromagnetic shielding performance from electroless nickel plating
- Original
Ruoting Liu, Danyang Wang, Yanjun Xie, Jian Li, Lijuan Wang
Multiwalled carbon nanotube/cationic cellulose nanofibril electrothermal films: mechanical, electrical, electrothermal, and cycling performances
- Original
Shanqing Liang, Huicong Wang, Xin Tao
Sulfation of arabinogalactan with sulfamic acid under homogeneous conditions in dimethylsulfoxide medium
- Original
A. V. Levdansky, N. Yu. Vasilyeva, A. A. Kondrasenko, V. A. Levdansky, Yu. N. Malyar, A. S. Kazachenko, B. N. Kuznetsov
Understanding the effect of co-reactants on ketonization of carboxylic acids in the aqueous-phase pyrolysis oil of wood
- Open Access
- Original
Il-Ho Choi, Hye-Jin Lee, Kyung-Ran Hwang
The deposition of carbohydrates and lignin in the cell walls of Calamus simplicifolius during development
- Original
Kun Wang, Xinge Liu, Shumin Yang, Jianfeng Ma, Kexia Jin, Genlin Tian
Sodium silicate/magnesium chloride compound-modified Chinese fir wood
- Original
Yuan Zhang, Xiaoqian Bi, Ping Li, Yiqiang Wu, Guangming Yuan, Xianjun Li, Yingfeng Zuo
Effect of glycerol-maleic anhydride treatment on technological properties of short rotation teak wood
- Original
Resa Martha, Mahdi Mubarok, Irmanida Batubara, Istie S. Rahayu, Loedy Setiono, Wayan Darmawan, Firmin Obounou Akong, Béatrice George, Christine Gérardin, Philippe Gérardin
The dynamic of roasted aroma compounds release from oak wood: investigation of the heating barrel process and some spirit maturation parameters
- Original
Magali Picard, Marie-Françoise Nonier, Nathalie Vivas, Nicolas Vivas
