Avoid common mistakes on your manuscript.
Correction to: JOM, Vol. 69, No. 3, 2017, DOI: 10.1007/s11837-017-2257-2
In the published version of this paper, there is an error in the indexing of the fcc diffraction pattern in Fig. 5c. The corrected figure is shown below (Fig. 5).
SEM images of LENS™-deposited (a) Ni-Fe-V and (b) Ni-Fe-Mo alloy as well as selected area diffraction patterns and bright-field TEM images of Ni-Fe-V (c, d) and Ni-Fe-Mo (e, f) alloys, respectively
Author information
Authors and Affiliations
Corresponding author
Additional information
The online version of the original article can be found under doi:10.1007/s11837-017-2257-2.
Rights and permissions
About this article
Cite this article
Mikler, C.V., Chaudhary, V., Borkar, T. et al. Correction to: Laser Additive Manufacturing of Magnetic Materials. JOM 69, 2855–2856 (2017). https://doi.org/10.1007/s11837-017-2623-0
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11837-017-2623-0