nach oben

Progress in Additive Manufacturing

21.04.2024 | Review Article

Additive manufacturing for producing microchannel heat sinks

verfasst von: A. N. Kivanani, S. Khalilpourazary, F. Mobadersani

Erschienen in: Progress in Additive Manufacturing

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

The inability to produce 3D parts with high internal complexity and chip formation are significant disadvantages of machining processes. In contrast to machining, the wide range of materials and techniques of the additive manufacturing processes is a great step toward manufacturing the complicated ideas of designers in 3D form. The negligible dependence of additive manufacturing processes on factors such as the internal and external complexity, dimensional accuracy, and material of the 3D part has turned it into an innovative method to overcome the manufacturing problems of modern microchannel heat sinks. This review highlights the recent developments in producing physical microchannel heat sinks using additive manufacturing processes. Despite few studies conducted to produce microchannel heat sinks with 3D printing methods, the present study aims to assess the role of additive manufacturing in fabricating new microchannel heat sinks with higher efficiency and proper thermal performance to remove the heat generated from electronic systems.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Naqiuddin NH, Saw LH, Yew MC, Yusof F, Ng TC, Yew MK (2018) Overview of micro-channel design for high heat flux application. Renewable Sustain Energy Rev 82:901–914. https://doi.org/10.1016/j.rser.2017.09.110CrossRef

Yao SG, Ma ZS, Luo L, Chen RB (2003) Improvement of heat pipe technique for high heat flux electronics cooling. Dep Mech Eng East China Shipbuid Inst Zhenjiang Jiangsu 212003:1006–1008

Tuckerman D, Pease R (1981) High-performance heat sinking for VLSI. IEEE Electron Dev Lett 2:126–129CrossRef

Kose HA, Yildizeli A, Cadirci S (2022) Parametric study and optimization of microchannel heat sinks with various shapes. Appl Thermal Eng 211:118368. https://doi.org/10.1016/j.applthermaleng.2022.118368CrossRef

Dzarma G, Adeyemi A, Taj-Liad A (2020) Effect of inner surface roughness on pressure drop in a small diameter pip. Int J Novel Res Eng Pharm Sci 7:1–8

Kashefipour SM, Daryaee M, Ghomeshi M (2018) Effect of bed roughness on velocity profile and water entrainment in a sedimentary density current. Can J Civ Eng 45:9–17. https://doi.org/10.1139/cjce-2016-0490CrossRef

Al-Neama AF, Kapur N, Summers J, Thompson HM (2017) An experimental and numerical investigation of the use of liquid flow in serpentine microchannels for microelectronics cooling. Appl Therm Eng 116:709–723. https://doi.org/10.1016/j.applthermaleng.2017.02.001CrossRef

Duangthongsuk W, Wongwises S (2017) An experimental investigation on the heat transfer and pressure drop characteristics of nanofluid flowing in microchannel heat sink with multiple zigzag flow channel structures. Exp Therm Fluid Sci 87:30–9. https://doi.org/10.1016/j.expthermflusci.2017.04.013CrossRef

Cheng KX, Chong YS, Ooi KT (2018) Thermal-hydraulic performance of a tapered microchannel. Int Commun Heat Mass Transf 94:53–60. https://doi.org/10.1016/j.icheatmasstransfer.2018.03.008CrossRef

10.

Jung SY, Park H (2021) Experimental investigation of heat transfer of Al2O3 nanofluid in a microchannel heat sink. Int J Heat Mass Transf 179:121729. https://doi.org/10.1016/j.ijheatmasstransfer.2021.121729CrossRef

11.

Ho CJ, Hsu ST, Rashidi S, Yan WM (2020) Water-based nano-PCM emulsion flow and heat transfer in divergent mini-channel heat sink—an experimental investigation. Int J Heat Mass Trans 148:119086. https://doi.org/10.1016/j.ijheatmasstransfer.2019.119086CrossRef

12.

Wang G, Niu D, Xie F, Wang Y, Zhao X, Ding G (2015) Experimental and numerical investigation of a microchannel heat sink (MCHS) with micro-scale ribs and grooves for chip cooling. Appl Thermal Eng 85:61–70. https://doi.org/10.1016/j.applthermaleng.2015.04.009CrossRef

13.

Qu W, Mudawar I (2002) Experimental and numerical study of pressure drop and heat transfer in a single-phase micro-channel heat sink. Int J Heat Mass Transf 45:2549–2565. https://doi.org/10.1016/S0017-9310(01)00337-4CrossRef

14.

Van Toan N, Ito K, Tuoi TTK, Toda M, Chen PH, Sabri MFM, Li J, Ono T (2022) Micro-heat sink based on silicon nanowires formed by metal-assisted chemical etching for heat dissipation enhancement to improve performance of micro-thermoelectric generator. Energy Convers Manag 267:115923. https://doi.org/10.1016/j.enconman.2022.115923CrossRef

15.

Deng D, Wan W, Huang Q, Huang X, Zhou W (2016) Investigations on laser micromilling of circular micro pin fins for heat sink cooling systems. Int J Adv Manuf Technol 87:151–164. https://doi.org/10.1007/s00170-016-8468-9CrossRef

16.

Vock S, Klöden B, Kirchner A, Weißgärber T, Kieback B (2019) Powders for powder bed fusion: a review. Prog Addit Manuf 4:383–97. https://doi.org/10.1007/s40964-019-00078-6CrossRef

17.

ISO/ASTM International (2015) ISO/ASTM 52900–Additive manufacturing–General principles–terminology. Int Stand 5:1–26

18.

Gentili E, Tabaglio L, Aggogeri F (2005) Review on micromachining techniques. In: InAMST’05 advanced manufacturing systems and technology: proceedings of the seventh international conference, pp 387–396. https://doi.org/10.1007/3-211-38053-1_37

19.

Li X, Fu D, Xu W, Yuan D, Jiang X, Fu T, Chu X, Gao Y, Zhou W (2022) Fabrication of high aspect ratio ceramic micro-channel in diamond wire sawing as catalyst support used in micro-reactor for hydrogen production. Int J Hydrog Energy 47:35123–35135. https://doi.org/10.1016/j.ijhydene.2022.08.103CrossRef

20.

Guo H, Cao S, Li L, Zhang X (2022) A review on the mainstream through-silicon via etching methods. Mater Sci Semicond Process 137:106182. https://doi.org/10.1016/j.mssp.2021.106182CrossRef

21.

Faisal N, Zindani D, Kumar K, Bhowmik S (2019) Laser micromachining of engineering materials—a review. Micro Nano Mach Eng Mater Recent Dev 2019:121–136. https://doi.org/10.1007/978-3-319-99900-5_6CrossRef

22.

Kumar MB, Sathiya P (2021) Methods and materials for additive manufacturing: a critical review on advancements and challenges. Thin-Walled Struct 159:107228. https://doi.org/10.1016/j.tws.2020.107228CrossRef

23.

Prabhu R, Simpson TW, Miller SR, Meisel NA (2022) Mastering manufacturing: exploring the influence of engineering designers’ prior experience when using design for additive manufacturing. J Eng Des 33:366–387. https://doi.org/10.1080/09544828.2022.2075222CrossRef

24.

Khorasani M, Leary M, Downing D, Rogers J, Ghasemi A, Gibson I, Brudler S, Rolfe B, Brandt M, Bateman S (2023) Numerical and experimental investigations on manufacturability of Al–Si–10Mg thin wall structures made by LB-PBF. Thin-Walled Struct 188:110814. https://doi.org/10.1016/j.tws.2023.110814CrossRef

25.

Feng S, Chen S, Kamat AM, Zhang R, Huang M, Hu L (2020) Investigation on shape deviation of horizontal interior circular channels fabricated by laser powder bed fusion. Addit Manuf 36:101585. https://doi.org/10.1016/j.addma.2020.101585CrossRef

26.

Grünewald J, Reinelt J, Sedlak H, Wudy K (2023) Support-free laser-based powder bed fusion of metals using pulsed exposure strategies. Prog Addit Manuf 8:1631–1640. https://doi.org/10.1007/s40964-023-00429-4CrossRef

27.

Jaksch A, Cholewa S, Drummer D (2023) Thin-walled part properties in powder bed fusion of polymers—a comparative study on temperature development and part performance depending on part thickness and orientation. J Manuf Mater Process 7:96. https://doi.org/10.3390/jmmp7030096CrossRef

28.

Dai H, Chen W (2020) Numerical investigation of heat transfer in the double-layered minichannel with microencapsulated phase change suspension. Int Commun Heat Mass Transf 119:104918. https://doi.org/10.1016/j.icheatmasstransfer.2020.104918CrossRef

29.

Hung TC, Yan WM, Wang XD, Huang YX (2012) Optimal design of geometric parameters of double-layered microchannel heat sinks. Int J Heat Mass Transf 55:3262–3272. https://doi.org/10.1016/j.ijheatmasstransfer.2012.02.059CrossRef

30.

Pan M, Wang H, Zhong Y, Hu M, Zhou X, Dong G, Huang P (2019) Experimental investigation of the heat transfer performance of microchannel heat exchangers with fan-shaped cavities. Int J Heat Mass Transf 134:1199–208. https://doi.org/10.1016/j.ijheatmasstransfer.2019.01.140CrossRef

31.

Joseph M, Sajith V (2019) An investigation on heat transfer performance of polystyrene encapsulated n-octadecane based nanofluid in square channel. Appl Thermal Eng 147:756–769. https://doi.org/10.1016/j.applthermaleng.2018.10.120CrossRef

32.

Wang B, Hong Y, Hou X, Xu Z, Wang P, Fang X, Ruan X (2015) Numerical configuration design and investigation of heat transfer enhancement in pipes filled with gradient porous materials. Energy Convers Manag 105:206–215. https://doi.org/10.1016/j.enconman.2015.07.064CrossRef

33.

Gong L, Li Y, Bai Z, Xu M (2018) Thermal performance of micro-channel heat sink with metallic porous/solid compound fin design. Appl Thermal Eng 137:288–295. https://doi.org/10.1016/j.applthermaleng.2018.03.065CrossRef

34.

Brinda R, Daniel RJ, Sumangalaa K (2012) Effect of aspect ratio on the hydraulic and thermal performance of ladder shape micro channels employed micro cooling systems. Procedia Eng 38:2022–2032. https://doi.org/10.1016/j.proeng.2012.06.244CrossRef

35.

Jadhav SV, Pawar PM, Ronge BP (2018) Effect of pin-fin geometry on microchannel performance. Chem Product Process Model 14:20180016. https://doi.org/10.1515/cppm-2018-0016CrossRef

36.

Ghule K, Soni MS (2017) Numerical heat transfer analysis of wavy micro channels with different cross sections. Energy Procedia 109:471–8. https://doi.org/10.1016/j.egypro.2017.03.071CrossRef

37.

Sui Y, Teo CJ, Lee PS, Chew YT, Shu C (2010) Fluid flow and heat transfer in wavy microchannels. Int J Heat Mass Transf 53:2760–72. https://doi.org/10.1016/j.ijheatmasstransfer.2010.02.022CrossRef

38.

Alfaryjat AA, Mohammed HA, Adam NM, Ariffin MK, Najafabadi MI (2014) Influence of geometrical parameters of hexagonal, circular, and rhombus microchannel heat sinks on the thermohydraulic characteristics. Int Commun Heat Mass Transf 52:121–131. https://doi.org/10.1016/j.icheatmasstransfer.2014.01.015CrossRef

39.

Duryodhan VS, Singh A, Singh SG, Agrawal A (2015) Convective heat transfer in diverging and converging microchannels. Int J Heat Mass Transf 80:424–438. https://doi.org/10.1016/j.ijheatmasstransfer.2014.09.042CrossRef

40.

Bahaidarah HM, Anand NK, Chen HC (2005) Numerical study of heat and momentum transfer in channels with wavy walls. Numer Heat Transf Part A 47:417–439. https://doi.org/10.1080/10407780590891218CrossRef

41.

Wang CC, Chen CK (2002) Forced convection in a wavy-wall channel. Int J Heat Mass Transf 45:2587–2595. https://doi.org/10.1016/S0017-9310(01)00335-0CrossRef

42.

Mohammed HA, Gunnasegaran P, Shuaib NH (2011) Influence of channel shape on the thermal and hydraulic performance of microchannel heat sink. Int Commun Heat Mass Transf 38:474–480. https://doi.org/10.1016/j.icheatmasstransfer.2010.12.031CrossRef

43.

Mohammed HA, Gunnasegaran P, Shuaib NH (2011) Numerical simulation of heat transfer enhancement in wavy microchannel heat sink. Int Commun Heat Mass Transf 38:63–68. https://doi.org/10.1016/j.icheatmasstransfer.2010.09.012CrossRef

44.

Heidarshenas A, Azizi Z, Peyghambarzadeh SM, Sayyahi S (2021) Experimental investigation of heat transfer enhancement using ionic liquid-Al₂O₃ hybrid nanofluid in a cylindrical microchannel heat sink. Appl Thermal Eng 191:116879. https://doi.org/10.1016/j.applthermaleng.2021.116879CrossRef

45.

Schneck M, Horn M, Schmitt M, Seidel C, Schlick G, Reinhart G (2021) Review on additive hybrid-and multi-material-manufacturing of metals by powder bed fusion: state of technology and development potential. Prog Addit Manuf 7:1–4. https://doi.org/10.1007/s40964-021-00205-2CrossRef

46.

Tiwari R, Andhare RS, Shooshtari A, Ohadi M (2019) Development of an additive manufacturing-enabled compact manifold microchannel heat exchanger. Appl Thermal Eng 147:781–788. https://doi.org/10.1016/j.applthermaleng.2018.10.122CrossRef

47.

Sezer H, Tang J, Ahsan AN, Kaul S (2022) Modeling residual thermal stresses in layer-by-layer formation of direct metal laser sintering process for different scanning patterns for 316L stainless steel. Rapid Prototyp J. https://doi.org/10.1108/RPJ-10-2021-0268CrossRef

48.

Zhang Y, Zhang J (2017) Finite element simulation and experimental validation of distortion and cracking failure phenomena in direct metal laser sintering fabricated component. Addit Manuf 16:49–57. https://doi.org/10.1016/j.addma.2017.05.002CrossRef

49.

Collins IL, Weibel JA, Pan L, Garimella SV (2018) Evaluation of additively manufactured microchannel heat sinks. IEEE Trans Compon Packag Manuf Technol 9:446–457. https://doi.org/10.1109/tcpmt.2018.2866972CrossRef

50.

Ozguc S, Pan L, Weibel JA (2021) Optimization of permeable membrane microchannel heat sinks for additive manufacturing. Appl Thermal Eng 198:117490. https://doi.org/10.1016/j.applthermaleng.2021.117490CrossRef

51.

Narendran G, Mallikarjuna B, Nagesha BK, Gnanasekaran N (2023) Experimental investigation on additive manufactured single and curved double layered microchannel heat sink with nanofluids. Heat Mass Transf. https://doi.org/10.1007/s00231-022-03336-6CrossRef

52.

Ozguc S, Teague TF, Pan L, Weibel JA (2023) Experimental study of topology optimized, additively manufactured microchannel heat sinks designed using a homogenization approach. Int J Heat Mass Transf 209:124108. https://doi.org/10.1016/j.ijheatmasstransfer.2023.124108CrossRef

53.

Kong D, Jung E, Kim Y, Manepalli VV, Rah KJ, Kim HS, Hong Y, Choi HG, Agonafer D, Lee H (2023) An additively manufactured manifold-microchannel heat sink for high-heat flux cooling. Int J Mech Sci 248:108228. https://doi.org/10.1016/j.ijmecsci.2023.108228CrossRef

54.

Xu C, Xu S, Wang Z, Feng D (2012) Experimental investigation of flow and heat transfer characteristics of pulsating flows driven by wave signals in a microchannel heat sink. Int Commun Heat Mass Transf 125:105343. https://doi.org/10.1016/j.icheatmasstransfer.2021.105343CrossRef

55.

Cohen A (2014) MICA freeform vs selective laser melting. http://www.microfabrica.com/downloads/MIC-WhitePaper-2014.

56.

Kempers R, Colenbrander J, Tan W, Chen R, Robinson AJ (2022) Experimental characterization of a hybrid impinging microjet-microchannel heat sink fabricated using high-volume metal additive manufacturing. Int J Thermofluids 5:100029. https://doi.org/10.1016/j.ijft.2020.100029CrossRef

57.

Tan H, Wu L, Wang M, Yang Z, Du P (2019) Heat transfer improvement in microchannel heat sink by topology design and optimization for high heat flux chip cooling. Int J Heat Mass Transf 129:681–689. https://doi.org/10.1016/j.ijheatmasstransfer.2018.09.092CrossRef

58.

Shatokha V (2012) Sintering: methods and products. In: BoD–books on demand, Croatia

59.

Brandt M (2016) Laser additive manufacturing: materials, design, technologies, and applications. Elsevier, London

60.

Badiru AB, Valencia VV, Liu D (2017) Additive manufacturing handbook: product development for the defense industry. CRC Press, Boca RatonCrossRef

61.

MIT University (2020). http://apt.mit.edu/am-process-comparisons. Accessed 12 Jan 2024

Titel: Additive manufacturing for producing microchannel heat sinks
verfasst von: A. N. Kivanani
S. Khalilpourazary
F. Mobadersani
Publikationsdatum: 21.04.2024
Verlag: Springer International Publishing
Erschienen in: Progress in Additive Manufacturing
Print ISSN: 2363-9512
Elektronische ISSN: 2363-9520
DOI: https://doi.org/10.1007/s40964-024-00618-9

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht