nach oben

Geotechnical and Geological Engineering

Erschienen in:

11.06.2020 | Original Paper

Determination of P-wave Velocity of Carbonate Building Stones During Freeze–Thaw Cycles

verfasst von: Vahid Amirkiyaei, Ebrahim Ghasemi, Lohrasb Faramarzi

Erschienen in: Geotechnical and Geological Engineering | Ausgabe 6/2020

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

In this paper, laboratory investigations were conducted on 22 carbonate building stones (including 3 types of limestone, 12 types of travertine and 7 types of marble) from various quarries in Iran. Based on data obtained from these investigations, an empirical equation was developed to determine the P-wave velocity (V_P) of stones during freeze–thaw (F–T) cycles. This equation was developed by combining two previously suggested F–T decay models and predicts V_P of stones after each cycle of F–T based on properties of fresh stone. During developing phase, the performance of proposed equation was evaluated using three statistical indices including the coefficient of determination (R²), the root mean square error (RMSE) and the variance account for (VAF). The mean values of R², NRMSE and VAF were obtained as 0.940, 0.027 and 93.921, respectively, which indicates good prediction capacity of proposed equation. Furthermore, the results obtained from the validating phase indicated that the equation provides reliable prediction of V_p with error percentage of less than 10%. Therefore, the output of equation can be applied to assess the deterioration of building stones during F–T action.

Vorheriger Artikel Developing a Liquefaction-Related Protocol for the FEED Design Phase of a Pipeline RoW Corridor

Nächster Artikel Strong Ground Motion in Bangladesh and North-East Indian Region from 2005 to 2017 and Its Prediction of Attenuation Data during Future Earthquakes

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Altindag R (2012) Correlation between P-wave velocity and some mechanical properties for sedimentary rocks. J S Afr Inst Min Metal 112:229–237

Altindag R, Alyildiz IS, Onargan T (2004) Mechanical property degradation of ignimbrite subjected to recurrent freeze–thaw cycles. Int J Rock Mech Min Sci 41:1023–1028. https://doi.org/10.1016/j.ijrmms.2004.03.005CrossRef

Bayram F (2012) Predicting mechanical strength loss of natural stones after freeze–thaw in cold regions. Cold Reg Sci Technol 83–84:98–102. https://doi.org/10.1016/j.coldregions.2012.07.003CrossRef

Chawre B (2018) Correlations between ultrasonic pulse wave velocities and rock properties of quartz-mica schist. J Rock Mech Geotech Eng 10:594–602. https://doi.org/10.1016/j.jrmge.2018.01.006CrossRef

Christaras B (2009) P-wave velocity and quality of building materials. In: Proceedings of the 3rd IASME/WSEAS International Conference on Geological Seismology (GES 2009), pp 41–46

Christaras B, Cuccuru F, Fais S (2015) Application of non destructive ultrasonic techniques for the analysis of the conservation status of building materials in monumental structures. Eng Geol Soc Territ Preserv 8:7–9. https://doi.org/10.1007/978-3-319-09408-3CrossRef

Concu G, De Nicolo B, Valdes M (2014) Prediction of building limestone physical and mechanical properties by means of ultrasonic P-wave velocity. Sci World J. https://doi.org/10.1155/2014/508073CrossRef

Demirdag S (2013) Effects of freezing–thawing and thermal shock cycles on physical and mechanical properties of filled and unfilled travertines. Constr Build Mater 47:1395–1401. https://doi.org/10.1016/j.conbuildmat.2013.06.045CrossRef

Eslami J, Walbert C, Beaucour AL et al (2018) Influence of physical and mechanical properties on the durability of limestone subjected to freeze-thaw cycles. Constr Build Mater 162:420–429. https://doi.org/10.1016/j.conbuildmat.2017.12.031CrossRef

Fener M, Ince I (2015) Effects of the freeze–thaw (F–T) cycle on the andesitic rocks (Sille-Konya/Turkey) used in construction building. J Afr Earth Sci J 109:96–106. https://doi.org/10.1016/j.jafrearsci.2015.05.006CrossRef

Fioretti G, Andriani GF (2018) Ultrasonic wave velocity measurements for detecting decay in carbonate rocks. Q J Eng Geol Hydrogeol 51:179–186. https://doi.org/10.1144/qjegh2016-110CrossRef

Freire-Lista DM, Fort R, Varas-Muriel MJ (2015) Freeze-thaw fracturing in building granites. Cold Reg Sci Technol 113:40–51. https://doi.org/10.1016/j.coldregions.2015.01.008CrossRef

Gökçe MV, Ince I, Fener M et al (2016) The effects of freeze–thaw (F–T) cycles on the Gödene travertine used in historical structures in Konya (Turkey). Cold Reg Sci Technol 127:65–75. https://doi.org/10.1016/j.coldregions.2016.04.005CrossRef

Hatır ME, Korkanç M, Başar ME (2019) Evaluating the deterioration effects of building stones using NDT: the Küçükköy Church, Cappadocia Region, central Turkey. Bull Eng Geol Environ 78:3465–3478. https://doi.org/10.1007/s10064-018-1339-xCrossRef

International Society for Rock Mechanics (1981) Rock characterisation, testing and monitoring. In: Brown ET (ed) ISRM suggested methods. Pergamon, Oxford, p 211

ISRM (1981) Suggested method for rock characterization, testing and monitoring, ISRM commission on testingmethods. Pergamon Press, Oxford, p 211

Jamshidi A, Nikudel MR, Khamehchiyan M (2013) Predicting the long-term durability of building stones against freeze–thaw using a decay function model. Cold Reg Sci Technol 92:29–36. https://doi.org/10.1016/j.coldregions.2013.03.007CrossRef

Jamshidi A, Reza M, Khamehchiyan M (2016) Evaluation of the durability of Gerdoee travertine after freeze–thaw cycles in fresh water and sodium sulfate solution by decay function models. Eng Geol 202:36–43. https://doi.org/10.1016/j.enggeo.2016.01.004CrossRef

Kahraman S, Ulker U, Delibalta MS (2007) A quality classification of building stones from P-wave velocity and its application to stone cutting with gang saws. J S Afr Inst Min Metal 107:427–430

Kilic AM, Kahraman E, Kilic Ö (2017) The use of ultrasonic mesaurements determining the quality of the dimension stone blocks. Int J Nat Eng Sci 11:28–33

Kos A, Kortnik J (2015) Determining compatness of the quality of natural stone blocks with ultrasonic technic. RMZ M&G 62:255–264

Martínez-martínez J, Benavente D, Gomez-heras M et al (2013) Non-linear decay of building stones during freeze–thaw weathering processes. Constr Build Mater 38:443–454. https://doi.org/10.1016/j.conbuildmat.2012.07.059CrossRef

Matsuoka N (1990) Mechanisms of rock breakdown by frost action: an experimental approach. Cold Reg Sci Technol 17:253–270CrossRef

Momeni A, Abdilor Y, Khanlari GR et al (2016) The effect of freeze–thaw cycles on physical and mechanical properties of granitoid hard rocks. Bull Eng Geol Environ 75:1649–1656. https://doi.org/10.1007/s10064-015-0787-9CrossRef

Mutlutürk M, Altindag R, Türk G (2004) A decay function model for the integrity loss of rock when subjected to recurrent cycles of freezing-thawing and heating-cooling. Int J Rock Mech Min Sci 41:237–244. https://doi.org/10.1016/S1365-1609(03)00095-9CrossRef

Noor-E-Khuda S, Albermani F, Veidt M (2017) Flexural strength of weathered granites: influence of freeze and thaw cycles. Constr Build Mater 156:891–901. https://doi.org/10.1016/j.conbuildmat.2017.09.049CrossRef

Özbek A (2014) Investigation of the effects of wetting-drying and freezing-thawing cycles on some physical and mechanical properties of selected ignimbrites. Bull Eng Geol Environ 73:595–609. https://doi.org/10.1007/s10064-013-0519-yCrossRef

Park J, Hyun CU, Park HD (2015) Changes in microstructure and physical properties of rocks caused by artificial freeze–thaw action. Bull Eng Geol Environ 74:555–565. https://doi.org/10.1007/s10064-014-0630-8CrossRef

Sakcali A, Yavuz H, Sahin S (2016) Quality assessment of natural stone blocks by an Ultrasonic Method. Bull Eng Geol Environ 75:959–966CrossRef

SPSS 16.0 (2007) Statistical analysis software (Standard Version), SPSS Inc

Tan X, Chen Weizhong W, Yang J, Cao J (2011) Laboratory investigations on the mechanical properties degradation of granite under freeze-thaw cycles. Cold Reg Sci Technol 68:130–138. https://doi.org/10.1016/j.coldregions.2011.05.007CrossRef

Tripathy A, Singh TN, Kundu J (2015) Prediction of abrasiveness index of some Indian rocks using soft computing methods. Meas J Int Measure Confed 68:302–309. https://doi.org/10.1016/j.measurement.2015.03.009CrossRef

TSE 699 (1987) Methods of testing for natural building stones. Institute of Turkish Standards, Turk Standartları Enstitusu (TSE), Ankara, p 82

Uğur İ, Toklu HÖ (2019) Effect of multi-cycle freeze-thaw tests on the physico-mechanical and thermal properties of some highly porous natural stones. Bull Eng Geol Environ 63:1–13

Vasanelli E, Sileo M, Calia A, Aiello MA (2013) Non-destructive techniques to assess mechanical and physical properties of soft calcarenitic stones. Procedia Chem 8:35–44. https://doi.org/10.1016/j.proche.2013.03.006CrossRef

Vasanelli E, Colangiuli D, Calia A et al (2015) Ultrasonic pulse velocity for the evaluation of physical and mechanical properties of a highly porous building limestone. Ultrasonics 60:33–40. https://doi.org/10.1016/j.ultras.2015.02.010CrossRef

Vasanelli E, Calia A, Colangiuli D et al (2016) Assessing the reliability of non-destructive and moderately invasive techniques for the evaluation of uniaxial compressive strength of stone masonry units. Constr Build Mater 124:575–581. https://doi.org/10.1016/j.conbuildmat.2016.07.130CrossRef

Yasar E, Erdogan Y (2004) Correlating sound velocity with the density, compressive strength and Young’s modulus of carbonate rocks. Int J Rock Mech Min Sci 41:871–875. https://doi.org/10.1016/j.ijrmms.2004.01.012CrossRef

Yavuz H (2011) Effect of freeze–thaw and thermal shock weathering on the physical and mechanical properties of an andesite stone. Bull Eng Geol Environ. https://doi.org/10.1007/s10064-010-0302-2CrossRef

Yavuz H, Altindag R, Sarac S et al (2006) Estimating the index properties of deteriorated carbonate rocks due to freeze-thaw and thermal shock weathering. Int J Rock Mech Min Sci 43:767–775. https://doi.org/10.1016/j.ijrmms.2005.12.004CrossRef

Yurdakul M, Akdas H (2013) Modeling uniaxial compressive strength of building stones using non-destructive test results as neural networks input parameters. Constr Build Mater 47:1010–1019. https://doi.org/10.1016/j.conbuildmat.2013.05.109CrossRef

Zhang J, Deng H, Taheri A et al (2018) Degradation of physical and mechanical properties of sandstone subjected to freeze-thaw cycles and chemical erosion. Cold Reg Sci Technol 155:37–46. https://doi.org/10.1016/j.coldregions.2018.07.007CrossRef

Titel: Determination of P-wave Velocity of Carbonate Building Stones During Freeze–Thaw Cycles
verfasst von: Vahid Amirkiyaei
Ebrahim Ghasemi
Lohrasb Faramarzi
Publikationsdatum: 11.06.2020
Verlag: Springer International Publishing
Erschienen in: Geotechnical and Geological Engineering / Ausgabe 6/2020
Print ISSN: 0960-3182
Elektronische ISSN: 1573-1529
DOI: https://doi.org/10.1007/s10706-020-01409-z

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 6/2020

Application and Progress of Reinforcement Technology for Chinese Ancient Buildings with Wood Structure

Importance of Lower-Bound Shear Strengths in the Reliability of Spatially Random Clayey Slopes

Construction Method for Pulling Out Existing Piles and Influence of Pulling-Out Holes on the Surrounding Ground

Composition, Geotechnical Characteristics and the Potential for Industrial Use of Some Clay Bodies in Obudu and its Environs, Southeastern Nigeria

Rock Mass Structural Characterization Through DFN–LiDAR–DOS Methodology

An Investigation into Support Interaction of Ground Support Through Numerical Modelling and Laboratory Testing