nach oben

Journal of Material Cycles and Waste Management

16.05.2024 | ORIGINAL ARTICLE

Evaluation of the long-term performance of high-performance concrete produced with blended river sand/sea sand and high-volume GGBFS

verfasst von: Duy-Hai Vo, Vinh-Phuc Doan, May Huu Nguyen, Tan-Khoa Nguyen

Erschienen in: Journal of Material Cycles and Waste Management

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

The large amount of natural aggregate and cement in concrete production caused the exhaustion of natural resources and environmental impacts. Replacing the natural aggregate and cement using alternative materials in concrete production is necessary. The study aims to present the mechanical properties and durability of high-performance concrete produced with high-volume ground granulated blast furnace slag (GGBFS) and river sand/sea sand blended (S-HPC). The concrete mixtures were designed with a constant ratio of river sand and sea sand blending at 60:40 and various GGBFS content as partial cement replacement of 30%, 50%, and 70%. The mechanical strength and durability properties were observed up to 365 days of curing age. According to the findings, the S-HPC presented a good compressive strength achievement in a range of 73.2–83.9 MPa and UPV value of 4662–4860 m/s at 365 days of curing age. The washed sea sand concrete mixture presented a higher compressive strength and better durability performance than non-washed sea sand. Incorporating with GGBFS into S-HPC by up to 50% significantly improved concrete samples' mechanical performance, durability, and microstructure. Using GGBFS reduced the current records and delayed the initiation corrosion time of concrete samples.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Kazemian M, Shafei B (2023) Carbon sequestration and storage in concrete: a state-of-the-art review of compositions, methods, and developments. J CO2 Util 70:102443. https://doi.org/10.1016/j.jcou.2023.102443CrossRef

Hottle T, Hawkins TR, Chiquelin C, Lange B, Young B, Sun P, Elgowainy A, Wang M (2022) Environmental life-cycle assessment of concrete produced in the United States. J Clean Prod 363:131834. https://doi.org/10.1016/j.jclepro.2022.131834CrossRef

Monteiro PJM, Miller SA, Horvath A (2017) Towards sustainable concrete. Nat Mater 16:698–699. https://doi.org/10.1038/nmat4930CrossRef

Lai G, Liu X, Li S, Xu Y, Zheng Y, Guan J, Gao R, Wei Z, Wang Z, Cui S (2023) Development of chemical admixtures for green and environmentally friendly concrete: a review. J Clean Prod 389:136116. https://doi.org/10.1016/j.jclepro.2023.136116CrossRef

Shehata N, Mohamed OA, Sayed ET, Abdelkareem MA, Olabi AG (2022) Geopolymer concrete as green building materials: Recent applications, sustainable development and circular economy potentials. Sci Total Environ 836:155577. https://doi.org/10.1016/j.scitotenv.2022.155577CrossRef

Guo Y, Luo L, Liu T, Hao L, Li Y, Liu P, Zhu T (2024) A review of low-carbon technologies and projects for the global cement industry. J Environ Sci 136:682–697. https://doi.org/10.1016/j.jes.2023.01.021CrossRef

Chindasiriphan P, Meenyut B, Orasutthikul S, Jongvivatsakul P, Tangchirapat W (2023) Influences of high-volume coal bottom ash as cement and fine aggregate replacements on strength and heat evolution of eco-friendly high-strength concrete. J Build Eng 65:105791. https://doi.org/10.1016/j.jobe.2022.105791CrossRef

Atmaca A (2023) Detailed assessment of specific exergetic costing, energy consumption, and environmental impacts of a rotary kiln in cement industry. Environ Sci Pollut Res 30:40260–40282. https://doi.org/10.1007/s11356-022-24882-wCrossRef

Mossie AT, Khatiwada D, Palm B, Bekele G (2023) Investigating energy saving and climate mitigation potentials in cement production – a case study in Ethiopia. Energy Convers Manage 287:117111. https://doi.org/10.1016/j.enconman.2023.117111CrossRef

10.

Marschke M, Rousseau J-F (2022) Sand ecologies, livelihoods and governance in Asia: a systematic scoping review. Resour Policy 77:102671. https://doi.org/10.1016/j.resourpol.2022.102671CrossRef

11.

Limeira J, Agullo L, Etxeberria M (2010) Dredged marine sand in concrete: An experimental section of a harbor pavement. Constr Build Mater 24:863–870. https://doi.org/10.1016/j.conbuildmat.2009.12.011CrossRef

12.

Drew LJ, Langer WH, Sachs JS (2002) Environmentalism and natural aggregate mining. Nat Resour Res 11:19–28. https://doi.org/10.1023/A:1014283519471CrossRef

13.

Liu W, Huang R, Fu J, Tang W, Dong Z, Cui H (2018) Discussion and experiments on the limits of chloride, sulphate and shell content in marine fine aggregates for concrete. Constr Build Mater 159:725–733. https://doi.org/10.1016/j.conbuildmat.2017.10.078CrossRef

14.

Çağatay İH (2005) Experimental evaluation of buildings damaged in recent earthquakes in Turkey. Eng Fail Anal 12:440–452. https://doi.org/10.1016/j.engfailanal.2004.02.007CrossRef

15.

Miller S, Shemer H, Semiat R (2015) Energy and environmental issues in desalination. Desalination 366:2–8. https://doi.org/10.1016/j.desal.2014.11.034CrossRef

16.

Nishida T, Otsuki N, Ohara H, Garba-Say Zoulkanel M, Nagata T (2015) Some considerations for applicability of seawater as mixing water in concrete. J Mater Civ Eng 27:B4014004. https://doi.org/10.1061/(ASCE)MT.1943-5533.0001006CrossRef

17.

Tulashie SK, Kotoka F, Mensah D, Kwablah AK (2017) Investigation of the compressive strength of pit sand, and sea sand mortar prisms produced with rice husk ash as additive. Constr Build Mater 151:383–387. https://doi.org/10.1016/j.conbuildmat.2017.06.082CrossRef

18.

Limeira J, Etxeberria M, Agulló L, Molina D (2011) Mechanical and durability properties of concrete made with dredged marine sand. Constr Build Mater 25:4165–4174. https://doi.org/10.1016/j.conbuildmat.2011.04.053CrossRef

19.

Chen C, Ji T, Zhuang Y, Lin X (2015) Workability, mechanical properties and affinity of artificial reef concrete. Constr Build Mater 98:227–236. https://doi.org/10.1016/j.conbuildmat.2015.05.109CrossRef

20.

Xu Q, Ji T, Yang Z, Ye Y (2019) Preliminary investigation of artificial reef concrete with sulphoaluminate cement, marine sand and sea water. Constr Build Mater 211:837–846. https://doi.org/10.1016/j.conbuildmat.2019.03.272CrossRef

21.

Sai Deepak W, Naidu GT (2015) Effect on compressive strength of concrete using sea sand as a partial replacement for fine aggregate. Int J Res Eng Technol 04:180–183CrossRef

22.

Mahendran R, Godwin K, Selvan TG, Murugan M (2016) Experimental study on concrete using sea sand as fine aggregate. Int J Sci Eng Res 7:48–52

23.

Li YL, Zhao XL, Singh Raman RK, Al-Saadi S (2018) Thermal and mechanical properties of alkali-activated slag paste, mortar and concrete utilising seawater and sea sand. Constr Build Mater 159:704–724. https://doi.org/10.1016/j.conbuildmat.2017.10.104CrossRef

24.

Yang S, Xu J, Zang C, Li R, Yang Q, Sun S (2019) Mechanical properties of alkali-activated slag concrete mixed by seawater and sea sand. Constr Build Mater 196:395–410. https://doi.org/10.1016/j.conbuildmat.2018.11.113CrossRef

25.

Guo F, Al-Saadi S, Singh Raman RK, Zhao XL (2018) Durability of fiber reinforced polymer (FRP) in simulated seawater sea sand concrete (SWSSC) environment. Corros Sci 141:1–13. https://doi.org/10.1016/j.corsci.2018.06.022CrossRef

26.

Zhang Q, Xiao J, Liao Q, Duan Z (2019) Structural behavior of seawater sea-sand concrete shear wall reinforced with GFRP bars. Eng Struct 189:458–470. https://doi.org/10.1016/j.engstruct.2019.03.101CrossRef

27.

Kuo WT, Wang HY, Shu CY (2014) Engineering properties of cementless concrete produced from GGBFS and recycled desulfurization slag. Constr Build Mater 63:189–196. https://doi.org/10.1016/j.conbuildmat.2014.04.017CrossRef

28.

Sharmila P, Dhinakaran G (2016) Compressive strength, porosity and sorptivity of ultra fine slag based high strength concrete. Constr Build Mater 120:48–53. https://doi.org/10.1016/j.conbuildmat.2016.05.090CrossRef

29.

Song HW, Saraswathy V (2006) Studies on the corrosion resistance of reinforced steel in concrete with ground granulated blast-furnace slag—an overview. J Hazard Mater 138:226–233. https://doi.org/10.1016/j.jhazmat.2006.07.022CrossRef

30.

Duran Atiş C, Bilim C (2007) Wet and dry cured compressive strength of concrete containing ground granulated blast-furnace slag. Build Environ 42:3060–3065. https://doi.org/10.1016/j.buildenv.2006.07.027CrossRef

31.

Özbay E, Erdemir M, Durmuş Hİ (2016) Utilization and efficiency of ground granulated blast furnace slag on concrete properties – a review. Constr Build Mater 105:423–434. https://doi.org/10.1016/j.conbuildmat.2015.12.153CrossRef

32.

Irassar EF, Di Maio A, Batic OR (1996) Sulfate attack on concrete with mineral admixtures. Cem Concr Res 26:113–123. https://doi.org/10.1016/0008-8846(95)00195-6CrossRef

33.

Higgins DD (2003) Increased sulfate resistance of ggbs concrete in the presence of carbonate. Cement Concr Compos 25:913–919. https://doi.org/10.1016/S0958-9465(03)00148-3CrossRef

34.

Saikia N, Kato S, Kojima T (2006) Thermogravimetric investigation on the chloride binding behaviour of MK–lime paste. Thermochim Acta 444:16–25. https://doi.org/10.1016/j.tca.2006.02.012CrossRef

35.

Chang H (2017) Chloride binding capacity of pastes influenced by carbonation under three conditions. Cement Concr Compos 84:1–9. https://doi.org/10.1016/j.cemconcomp.2017.08.011CrossRef

36.

Li Q, Geng H, Huang Y, Shui Z (2015) Chloride resistance of concrete with metakaolin addition and seawater mixing: a comparative study. Constr Build Mater 101:184–192. https://doi.org/10.1016/j.conbuildmat.2015.10.076CrossRef

37.

Kaneko T, Okura M (2018) Properties of concrete with portland blast-furnace slag cement TYpe A consisting of a blend of ordinary portland cement and blast-furnace slag cement type B. Concr J 56:562–569. https://doi.org/10.3151/coj.56.7_562CrossRef

38.

Nguyen MH, Huynh TP (2022) Turning incinerator waste fly ash into interlocking concrete bricks for sustainable development. Constr Build Mater 321:126385. https://doi.org/10.1016/j.conbuildmat.2022.126385CrossRef

39.

Nguyen MH, Nguyen VT, Huynh TP, Hwang CL (2021) Incorporating industrial by-products into cement-free binders: Effects on water absorption, porosity, and chloride penetration. Constr Build Mater 304:124675. https://doi.org/10.1016/j.conbuildmat.2021.124675CrossRef

40.

Zhao Y, Hu X, Shi C, Zhang Z, Zhu D (2021) A review on seawater sea-sand concrete: mixture proportion, hydration, microstructure and properties. Constr Build Mater 295:123602. https://doi.org/10.1016/j.conbuildmat.2021.123602CrossRef

41.

Raupach M (1996) Chloride-induced macrocell corrosion of steel in concrete—theoretical background and practical consequences. Constr Build Mater 10:329–338. https://doi.org/10.1016/0950-0618(95)00018-6CrossRef

42.

Society C (2004) Concrete Society Technical Report 60: Electrochemical Tests for Reinforcement Corrosion. The Concrete Society, Surrey, UK

43.

Vo DH, Do ND, Mamuye Y, Liao MC, Hwang CL, Tran QT (2022) Engineering properties and durability of concrete samples designed by densified mixture design algorithm (DMDA) method incorporating steel reducing slag aggregate. Constr Build Mater 354:129180. https://doi.org/10.1016/j.conbuildmat.2022.129180CrossRef

44.

Yaseen SA, Yiseen GA, Poon CS, Li Z (2020) Influence of seawater on the morphological evolution and the microchemistry of hydration products of tricalcium silicates (C3S). ACS Sustain Chem Eng 8:15875–15887. https://doi.org/10.1021/acssuschemeng.0c04440CrossRef

45.

Keisaburo Katano NT, Yoshikazu Ishizeki, and Keishiro Iriya (2013) Properties and application of concrete made with sea water and un-washed sea sand. Third International Conference on Sustainable Construction Materials and Technologies SCMT3 : proceedings

46.

Taylor MA, Kuwairi A (1978) Effects of ocean salts on the compressive strength of concrete. Cem Concr Res 8:491–500. https://doi.org/10.1016/0008-8846(78)90029-7CrossRef

47.

Younis A, Ebead U, Suraneni P, Nanni A (2018) Fresh and hardened properties of seawater-mixed concrete. Constr Build Mater 190:276–286. https://doi.org/10.1016/j.conbuildmat.2018.09.126CrossRef

48.

De Weerdt K, Justnes H, Geiker MR (2014) Changes in the phase assemblage of concrete exposed to sea water. Cement Concr Compos 47:53–63. https://doi.org/10.1016/j.cemconcomp.2013.09.015CrossRef

49.

Mesbah A, François M, Cau-dit-Coumes C, Frizon F, Filinchuk Y, Leroux F, Ravaux J, Renaudin G (2011) Crystal structure of Kuzel’s salt 3CaO•Al2O3•1/2CaSO4•1/2CaCl2•11H2O determined by synchrotron powder diffraction. Cem Concr Res 41:504–509. https://doi.org/10.1016/j.cemconres.2011.01.015CrossRef

50.

Etxeberria M, Fernandez JM, Limeira J (2016) Secondary aggregates and seawater employment for sustainable concrete dyke blocks production: case study. Constr Build Mater 113:586–595. https://doi.org/10.1016/j.conbuildmat.2016.03.097CrossRef

51.

Erdem S, Dawson AR, Thom NH (2012) Impact load-induced micro-structural damage and micro-structure associated mechanical response of concrete made with different surface roughness and porosity aggregates. Cem Concr Res 42:291–305. https://doi.org/10.1016/j.cemconres.2011.09.015CrossRef

52.

Thomas MDA, Hooton RD, Scott A, Zibara H (2012) The effect of supplementary cementitious materials on chloride binding in hardened cement paste. Cem Concr Res 42:1–7. https://doi.org/10.1016/j.cemconres.2011.01.001CrossRef

53.

Li H, Farzadnia N, Shi C (2018) The role of seawater in interaction of slag and silica fume with cement in low water-to-binder ratio pastes at the early age of hydration. Constr Build Mater 185:508–518. https://doi.org/10.1016/j.conbuildmat.2018.07.091CrossRef

54.

Pan D, Yaseen SA, Chen K, Niu D, Ying Leung CK, Li Z (2021) Study of the influence of seawater and sea sand on the mechanical and microstructural properties of concrete. J Build Eng 42:103006. https://doi.org/10.1016/j.jobe.2021.103006CrossRef

55.

Gan Y, Zhang H, Liang M, Zhang Y, Schlangen E, Van Breugel K, Šavija B (2022) Flexural strength and fatigue properties of interfacial transition zone at the microscale. Cement Concr Compos 133:104717CrossRef

56.

Adiwijaya HH, Sagawa Y, Yamamoto D (2017) Influence of seawater mixing and curing on strength characteristics and porosity of ground granulated blast-furnace slag concrete. IOP Conf Ser: Mater Sci Eng 271:012070. https://doi.org/10.1088/1757-899X/271/1/012070CrossRef

57.

Whitehurst EA (1951) Soniscope tests concrete structures. ACI J Proceed. https://doi.org/10.14359/12004CrossRef

58.

Shi Z, Shui Z, Li Q, Geng H (2015) Combined effect of metakaolin and sea water on performance and microstructures of concrete. Constr Build Mater 74:57–64. https://doi.org/10.1016/j.conbuildmat.2014.10.023CrossRef

59.

Jakobsen UH, De Weerdt K, Geiker MR (2016) Elemental zonation in marine concrete. Cem Concr Res 85:12–27. https://doi.org/10.1016/j.cemconres.2016.02.006CrossRef

60.

Sukmak P, De Silva P, Horpibulsuk S, Chindaprasirt P (2015) Sulfate resistance of clay-portland cement and clay high-calcium fly ash geopolymer. J Mater Civ Eng 27:04014158. https://doi.org/10.1061/(ASCE)MT.1943-5533.0001112CrossRef

61.

Li J, Wu Z, Shi C, Yuan Q, Zhang Z (2020) Durability of ultra-high performance concrete – a review. Constr Build Mater 255:119296. https://doi.org/10.1016/j.conbuildmat.2020.119296CrossRef

62.

Elahi MMA, Shearer CR, Naser Rashid Reza A, Saha AK, Khan MNN, Hossain MM, Sarker PK (2021) Improving the sulfate attack resistance of concrete by using supplementary cementitious materials (SCMs): A review. Constr Build Mater 281:122628. https://doi.org/10.1016/j.conbuildmat.2021.122628CrossRef

63.

Topçu IB (2013) 10 - High-volume ground granulated blast furnace slag (GGBFS) concrete. In: Pacheco-Torgal F, Jalali S, Labrincha J, John VM (eds) Eco-Efficient Concrete. Woodhead Publishing, pp 218–240CrossRef

64.

Chen W (2006) Hydration of slag cement : theory, modeling and application

65.

Aly T, Sanjayan JG (2010) Effect of pore-size distribution on shrinkage of concretes. J Mater Civ Eng 22:525–532. https://doi.org/10.1061/(ASCE)0899-1561(2010)22:5(525)CrossRef

66.

Jiqiu Yuan WLDD, JoAnn B (2015) Effect of slag cement on drying shrinkage of concrete. ACI Mater J. https://doi.org/10.14359/51687129CrossRef

67.

Liu J, Wang X, Qiu Q, Ou G, Xing F (2017) Understanding the effect of curing age on the chloride resistance of fly ash blended concrete by rapid chloride migration test. Mater Chem Phys 196:315–323. https://doi.org/10.1016/j.matchemphys.2017.05.011CrossRef

68.

Liu J, Qiu Q, Chen X, Xing F, Han N, He Y, Ma Y (2017) Understanding the interacted mechanism between carbonation and chloride aerosol attack in ordinary Portland cement concrete. Cem Concr Res 95:217–225. https://doi.org/10.1016/j.cemconres.2017.02.032CrossRef

69.

Jin H, Liu J, Jiang Z, Zhou H, Liu J (2021) Influence of the rainfall intensity on the chloride ion distribution in concrete with different levels of initial water saturation. Constr Build Mater 281:122561. https://doi.org/10.1016/j.conbuildmat.2021.122561CrossRef

70.

Liu J, Ou G, Qiu Q, Chen X, Hong J, Xing F (2017) Chloride transport and microstructure of concrete with/without fly ash under atmospheric chloride condition. Constr Build Mater 146:493–501. https://doi.org/10.1016/j.conbuildmat.2017.04.018CrossRef

71.

Han S, Zhong J, Ding W, Ou J (2021) Strength, hydration, and microstructure of seawater sea-sand concrete using high-ferrite Portland cement. Constr Build Mater 295:123703. https://doi.org/10.1016/j.conbuildmat.2021.123703CrossRef

72.

Li Q, Yuan G, Xu Z, Dou T (2014) Effect of elevated temperature on the mechanical properties of high-volume GGBS concrete. Mag Concr Res 66(24):1277–1285CrossRef

73.

Dias WPS, Seneviratne GAPSN, Nanayakkara SMA (2008) Offshore sand for reinforced concrete. Constr Build Mater 22:1377–1384. https://doi.org/10.1016/j.conbuildmat.2007.04.006CrossRef

74.

Nguyen HA, Chang TP, Shih JY, Chen CT, Nguyen TD (2016) Sulfate resistance of low energy SFC no-cement mortar. Construction and Building Materials 102. Part 1:239–243. https://doi.org/10.1016/j.conbuildmat.2015.10.107CrossRef

75.

Zhang ZH, Sang ZQ, Zhang LY, Ma ZX, Zhang Y (2013) Experimental research on durability of concrete made by seawater and sea-sand. Adv Mater Res 641–642:385–388. https://doi.org/10.4028/www.scientific.net/AMR.641-642.385CrossRef

76.

Vo DH, Tran Thi KD, Mamuye Y, Do ND, Liao MC, Hwang CL (2023) Engineering properties and stability of high-performance mortar incorporating untreated and treated steel reducing slag aggregate. J Build Eng 67:105992. https://doi.org/10.1016/j.jobe.2023.105992CrossRef

77.

Han S, Zhong J, Yu Q, Yan L, Ou J (2021) Sulfate resistance of eco-friendly and sulfate-resistant concrete using seawater sea-sand and high-ferrite Portland cement. Constr Build Mater 305:124753. https://doi.org/10.1016/j.conbuildmat.2021.124753CrossRef

78.

Majhi RK, Nayak AN (2019) Bond, durability and microstructural characteristics of ground granulated blast furnace slag based recycled aggregate concrete. Constr Build Mater 212:578–595. https://doi.org/10.1016/j.conbuildmat.2019.04.017CrossRef

79.

Majhi RK, Nayak AN (2020) Production of sustainable concrete utilising high-volume blast furnace slag and recycled aggregate with lime activator. J Clean Prod 255:120188. https://doi.org/10.1016/j.jclepro.2020.120188CrossRef

80.

Guo M, Hu B, Xing F, Zhou X, Sun M, Sui L, Zhou Y (2020) Characterization of the mechanical properties of eco-friendly concrete made with untreated sea sand and seawater based on statistical analysis. Constr Build Mater 234:117339. https://doi.org/10.1016/j.conbuildmat.2019.117339CrossRef

81.

Ho LS, Huynh TP (2023) Long-term mechanical properties and durability of high-strength concrete containing high-volume local fly ash as a partial cement substitution. Results Eng 18:101113. https://doi.org/10.1016/j.rineng.2023.101113CrossRef

82.

Crawford R, Stephan A, Prideaux F (2019) Environmental Performance in Construction (EPiC) Database

Titel: Evaluation of the long-term performance of high-performance concrete produced with blended river sand/sea sand and high-volume GGBFS
verfasst von: Duy-Hai Vo
Vinh-Phuc Doan
May Huu Nguyen
Tan-Khoa Nguyen
Publikationsdatum: 16.05.2024
Verlag: Springer Japan
Erschienen in: Journal of Material Cycles and Waste Management
Print ISSN: 1438-4957
Elektronische ISSN: 1611-8227
DOI: https://doi.org/10.1007/s10163-024-01977-9