nach oben

Journal of Polymer Research

Erschienen in:

01.04.2024 | Original Paper

Gallic acid—polyethyleneimine modified UHMWPE fibers with epoxy resin for investigating interfacial properties

verfasst von: Ziming Wang, Xinyi Zhu, Qiang Yu, Xia Feng, Yiping Zhao, Li Chen

Erschienen in: Journal of Polymer Research | Ausgabe 4/2024

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

In this paper, a safe, non-toxic, and low-cost method was adopted to modify ultra-high molecular weight polyethylene (UHMWPE) fibers. gallic acid (GA) and polyethyleneimine (PEI) were co-deposited on the surface of UHMWPE fibers by Michael addition and Schiff base reaction in an alkaline solution with pH 8.5. The structure and properties were analyzed and characterized by Fourier Transform Infrared Spectroscopy (FTIR), X-ray Photoelectron Spectroscopy (XPS), Thermogravimetric Analyzer (TG), etc. The morphology of the UHMWPE fibers and the degree of firmness of the surface coatings were observed by Scanning Electron Microscope (SEM), and the effects of different mass ratios of GA-PEI on the UHMWPE fibers were investigated. The results showed that the surface active functional groups of the modified UHMWPE fibers increased, and the bending properties and interfacial shear strength of the composites with epoxy resin were significantly improved, with the bending strength and interfacial shear strength increased by 33.1% and 45.9%, respectively.

Vorheriger Artikel Effect of chemical additives on the stability and performance of suspended-emulsion fracturing fluid formed by associative thickener

Nächster Artikel Investigation to the effects of particulate-polymer fillers on the viscoelastic properties of VHB 4910 elastomer for artificial muscle

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Si XJ, Liu SJ, Liu DH et al (2008) The preparation and study on UHMWPE/epoxy gel-spun fibres. AMR 47–50:722–725. https://doi.org/10.4028/www.scientific.net/AMR.47-50.722CrossRef

Chhetri S, Bougherara H (2021) A comprehensive review on surface modification of UHMWPE fiber and interfacial properties. Compos A Appl Sci Manuf 140:106146. https://doi.org/10.1016/j.compositesa.2020.106146CrossRef

Abdollahiparsa H, Shahmirzaloo A, Teuffel P, Blok R (2023) A review of recent developments in structural applications of natural fiber-Reinforced composites (NFRCs). Compos Adv Mater 32:263498332211475. https://doi.org/10.1177/26349833221147540CrossRef

Crouch IG (2019) Body armour – New materials, new systems. Def Technol 15:241–253. https://doi.org/10.1016/j.dt.2019.02.002CrossRef

Qin F, Lei Z, Ma Y et al (2018) Stress transfer of single yarn drawing in soft fabric studied by micro Raman spectroscopy. Compos A Appl Sci Manuf 112:134–141. https://doi.org/10.1016/j.compositesa.2018.06.002CrossRef

Wu X, Zhan L, Huang M et al (2021) Corrosion damage evolution and mechanical properties of carbon fiber reinforced aluminum laminate. J Cent South Univ 28:657–668. https://doi.org/10.1007/s11771-021-4635-8CrossRef

Zamora-Mendoza L, Gushque F, Yanez S et al (2023) Plant fibers as composite reinforcements for biomedical applications. Bioengineering 10:804. https://doi.org/10.3390/bioengineering10070804CrossRefPubMedPubMedCentral

Holloway JL, Lowman AM, VanLandingham MR, Palmese GR (2013) Chemical grafting for improved interfacial shear strength in UHMWPE/PVA-hydrogel fiber-based composites used as soft fibrous tissue replacements. Compos Sci Technol 85:118–125. https://doi.org/10.1016/j.compscitech.2013.06.007CrossRef

Kharitonov AP, Maksimkin AV, Mostovaya KS et al (2015) Reinforcement of bulk ultrahigh molecular weight polyethylene by fluorinated carbon nanotubes insertion followed by hot pressing and orientation stretching. Compos Sci Technol 120:26–31. https://doi.org/10.1016/j.compscitech.2015.10.009CrossRef

10.

Zheng H, Zhang W, Li B et al (2022) Recent advances of interphases in carbon fiber-reinforced polymer composites: a review. Compos B Eng 233:109639. https://doi.org/10.1016/j.compositesb.2022.109639CrossRef

11.

Liu X, Wang K (2020) RETRACTED: Interfacial microstructure and properties between epoxy resin and novel organic hybrid graphene oxide modification ultra high molecular weight polyethylene fiber. Polymer 197:122472. https://doi.org/10.1016/j.polymer.2020.122472CrossRef

12.

Li S, Yang P, Liu X et al (2019) Graphene oxide based dopamine mussel-like cross-linked polyethylene imine nanocomposite coating with enhanced hexavalent uranium adsorption. J Mater Chem A 7:16902–16911. https://doi.org/10.1039/C9TA04562GCrossRef

13.

ChrysO C, Hobben E, Faisal NH et al (2021) Electroanalytical determination of gallic acid in red and white wine samples using cobalt oxide nanoparticles-modified carbon-paste electrodes. Microchem J 160:105668. https://doi.org/10.1016/j.microc.2020.105668CrossRef

14.

Zhang H, Zhou D-D, Yang F-Q et al (2019) Modulation of electroosmotic flow in capillary electrophoresis by plant polyphenol-inspired gallic acid/polyethyleneimine coatings: Analysis of small molecules. J Chromatogr B 1124:7–16. https://doi.org/10.1016/j.jchromb.2019.05.031CrossRef

15.

Zhang M, Jin L, Zhai Y et al (2021) Bio-inspired gallic acid-gelatin coating: A novel strategy for eco-friendly interfacial modification of carbon fiber composites. Compos Commun 26:100790. https://doi.org/10.1016/j.coco.2021.100790CrossRef

16.

Liu Y, Fang Y, Liu X et al (2017) Mussel-inspired modification of carbon fiber via polyethyleneimine/polydopamine co-deposition for the improved interfacial adhesion. Compos Sci Technol 151:164–173. https://doi.org/10.1016/j.compscitech.2017.08.008CrossRef

17.

Zhang M, Liu L, Jin L et al (2020) Catechol-based co-deposited carbon fiber surfaces for enhancement of fiber/epoxy composites. Polym Compos 41:3817–3829. https://doi.org/10.1002/pc.25679CrossRef

18.

Sa R, Wei Z, Yan Y et al (2015) Catechol and epoxy functionalized ultrahigh molecular weight polyethylene (UHMWPE) fibers with improved surface activity and interfacial adhesion. Compos Sci Technol 113:54–62. https://doi.org/10.1016/j.compscitech.2015.03.017CrossRef

Titel: Gallic acid—polyethyleneimine modified UHMWPE fibers with epoxy resin for investigating interfacial properties
verfasst von: Ziming Wang
Xinyi Zhu
Qiang Yu
Xia Feng
Yiping Zhao
Li Chen
Publikationsdatum: 01.04.2024
Verlag: Springer Netherlands
Erschienen in: Journal of Polymer Research / Ausgabe 4/2024
Print ISSN: 1022-9760
Elektronische ISSN: 1572-8935
DOI: https://doi.org/10.1007/s10965-024-03960-2

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 4/2024

The synthesis of 4,4'-methylenebis(cyclohexylamine)-based porous organic polymers via nucleophilic substitution reactions for uptaking iodine and fluorescence sensing to dinitrophenol

PVDF crystalline phases revisited: a first-principles computational study using the PBE-D3 functional

Study on the preparation of macromolecular compatibilizer and its effect on the characteristics of fluoroelastomer (FKM)/silicone rubber (MVQ) blend

Electrospun polyacrylonitrile-based nanofibrous membrane for various biomedical applications

Isolation of microcrystalline cellulose from Musa paradisiaca (banana) plant leaves: physicochemical, thermal, morphological, and mechanical characterization for lightweight polymer composite applications

Recent trends in the development of Polyhydroxyalkanoates (PHAs) based biocomposites by blending with different bio-based polymers

Premium Partner

Marktübersichten