nach oben

Journal of Material Cycles and Waste Management

Erschienen in:

07.11.2022 | REVIEW

Impact and effectiveness of Bio-Coke conversion from biomass waste as alternative source of coal coke in Southeast Asia

verfasst von: Nur Syahirah Kamal Baharin, Supitchaya Cherdkeattikul, Nami Kanada, Hirofumi Hara, Satoru Mizuno, Toru Sawai, Manabu Fuchihata, Tamio Ida

Erschienen in: Journal of Material Cycles and Waste Management | Ausgabe 1/2023

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Growing concern over fossil fuel depletion and the environmental impact of greenhouse gases have driven the demand for solid biofuel energy as an alternative source of coal coke. Therefore, there is increasing attention on Bio-Coke as a new solid biofuel product. The moderate temperature with high loading pressure densification method shows the uniqueness of Bio-Coke, as it has a higher density and mechanical strength when compared to wood pellets and briquettes. These reasons are ideal properties for long-term storage and transportation to ensure the sustainable supply of solid biofuel. Moreover, Bio-Coke also has a stable structure at high temperatures (700 °C), making it suitable for many practical applications such as cupola furnaces. The potential utilization of Bio-Coke and the viability of Bio-Coke feedstock in Southeast Asia are described in this paper. The utilization of agricultural residues from the Southeast Asia region, such as coconut husk and oil palm frond showed a good quality of solid biofuel as it can exhibit a high calorific value of Bio-Coke. The paper also reviews the factors affecting the production process of Bio-Coke and the suggested methods for its mechanical property’s improvement. Moreover, it reviews the economics of Bio-Coke and the impact of its utilization in the Southeast Asia region. Finally, implementing a low-temperature drying system is recommended to lower the production cost of Bio-Coke.

Vorheriger Artikel Extraction of keratin from keratinous wastes: current status and future directions

Nächster Artikel 4R of rubber waste management: current and outlook

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Rahman MN, Wahid MA (2021) Renewable-based zero-carbon fuels for the use of power generation: a case study in Malaysia supported by updated developments worldwide. Energy Rep 7:1986–2020. https://doi.org/10.1016/j.egyr.2021.04.005CrossRef

Malaysia should shake off its increasing addiction to dirty coal. 2021. Available from https://www.freemalaysiatoday.com/category/opinion/2021/04/08/malaysia-should-shake-off-its-increasing-addiction-to-dirty-coal/?__cf_chl_jschl_tk__=sg9MxNtzt0fFtmp.NA8LYK17LClKAEyfg17WwT6WN54-1637547524-0-gaNycGzNB70

Nakapreecha N, Pongthanaisawan J, Wangjiraniran W (2021) Plausible scenarios for Thai energy businesses in the next 30 years. Front Energy Res 8:372. https://doi.org/10.3389/fenrg.2020.590932CrossRef

Zaekhan NND, Lubis AF, Soetjipto W (2019) Decomposition analysis of decoupling of manufacturing CO₂ emission in Indonesia. Int J Bus Soc 20:91–106

Lee H-H, Iraqui O, Wang C (2019) The impact of future fuel consumption on regional air quality in Southeast Asia. Sci Rep 9:2648. https://doi.org/10.1038/s41598-019-39131-3CrossRef

Advantages and disadvantages of solid fuels. 2021. Available from https://www.mechanicalfunda.com/2017/03/advantage-disadvantage-solid-fuel.html

Coal (2021). Available from https://www.nationalgeographic.org/encyclopedia/coal/

Tun MM, Juchelkova D, Win MM, Thu AM, Puchor T (2019) Biomass energy: an overview of biomass sources, energy potential, and management in Southeast Asian countries. Resources 8:81. https://doi.org/10.3390/resources8020081CrossRef

Umar M, Ji X, Kirikkaleli D, Alola AA (2021) The imperativeness of environmental quality in the United States transportation sector amidst biomass–fossil energy consumption and growth. J Clean Prod 285:1–15. https://doi.org/10.1016/j.jclepro.2020.124863CrossRef

10.

COP26 Goals (2021) Available from https://ukcop26.org/cop26-goals/

11.

Goal 13 (2021) Take urgent action to combat climate change and its impacts. Available from https://www.un.org/sustainabledevelopment/climate-change/

12.

Kandiyoti R, Herod A, Bartle K, Morgan T (2017) 1—Fossil fuels and renewables. In: Kandiyoti R, Herod A, Bartle K, Morgan T (eds) Solid fuels and heavy hydrocarbon liquids, 2nd edn. Elsevier, Amsterdam, pp 1–9

13.

Zhang L, Wang G, Xue Q, Zuo H, She X, Wang J (2021) Effect of preheating on coking coal and metallurgical coke properties: a review. Fuel Process Technol 221:1–14. https://doi.org/10.1016/j.fuproc.2021.106942CrossRef

14.

Farias Neto GW, Leite MBM, Marcelino TOAC, Carneiro LO, Brito KD, Brito RP (2021) Optimizing the coke oven process by adjusting the temperature of the combustion chambers. Energy 217:1–12. https://doi.org/10.1016/j.energy.2020.119419CrossRef

15.

Speight JG (2014) Chapter 4—Effects in refining. In: Speight JG (ed) High acid crudes. Gulf Professional Publishing, Boston, pp 77–109CrossRef

16.

Nishifuji M, Saito K, Ueki M, Fujioka Y, Ishiharaguchi Y (2011) Characterization of gas generation during coking reaction and continuous monitoring of COG using gas monitoring system. Nippon Steel

17.

Nieto-Delgado C, Cannon FS, Paulsen PD, Furness JC, Voigt RC, Pagnotti JR (2014) Bindered anthracite briquettes as fuel alternative to metallurgical coke: full scale performance in cupola furnaces. Fuel 121:39–47. https://doi.org/10.1016/j.fuel.2013.12.034CrossRef

18.

Wang S, Shen Y (2021) CFD-DEM modelling of raceway dynamics and coke combustion in an ironmaking blast furnace. Fuel 302:121167. https://doi.org/10.1016/j.fuel.2021.121167CrossRef

19.

Ahmed H, Sideris D, Björkman B (2020) Injection of H2-rich carbonaceous materials into the blast furnace: devolatilization, gasification and combustion characteristics and effect of increased H2–H2O on iron ore pellets reducibility. J Market Res 9:16029–16037. https://doi.org/10.1016/j.jmrt.2020.11.042CrossRef

20.

Mousa E, Lundgren M, Ökvist L, From L-E, Robles A, Hällsten S et al (2019) Reduced carbon consumption and CO₂ emission at the blast furnace by use of briquettes containing torrefied sawdust. J Sustain Metall 5:1–11. https://doi.org/10.1007/s40831-019-00229-7CrossRef

21.

Mandova H, Gale WF, Williams A, Heyes AL, Hodgson P, Miah KH (2018) Global assessment of biomass suitability for ironmaking—opportunities for co-location of sustainable biomass, iron and steel production and supportive policies. Sustain Energy Technol Assess 27:23–39. https://doi.org/10.1016/j.seta.2018.03.001CrossRef

22.

Mizuno S, Ida T, Fuchihata M, Namba K (2016) Effect of specimen size on ultimate compressive strength of Bio-Coke produced from green tea grounds. Mech Eng J 3:15–00441. https://doi.org/10.1299/mej.15-00441CrossRef

23.

Tagami N, Ida T (2018) Effect of moisture content, forming temperature and structural components on Biocoke solidification from various biomass resources. Mech Eng J 5:18–00030. https://doi.org/10.1299/mej.18-00030CrossRef

24.

Kamal Baharin NS, Koesoemadinata VC, Nakamura S, Yahya WJ, Muhammad Yuzir MA, Md Akhir FN et al (2020) Conversion and characterization of Bio-Coke from abundant biomass waste in Malaysia. Renew Energy 162:1017–1025. https://doi.org/10.1016/j.renene.2020.08.083CrossRef

25.

Shojaeiarani J, Bajwa DS, Bajwa SG (2019) Properties of densified solid biofuels in relation to chemical composition, moisture content, and bulk density of the biomass. BioResources 14:20. https://doi.org/10.15376/biores.14.2.ShojaeiaraniCrossRef

26.

Mizuno S, Ida T, Fuchihata M, Namba K, Sawai T (2013) Scale effect of compressive strength properties under high temperature, for green tea Bio-Coke. J Jpn Soc Exp Mech 13:190–193. https://doi.org/10.11395/jjsem.13.190CrossRef

27.

Bajwa DS, Peterson T, Sharma N, Shojaeiarani J, Bajwa SG (2018) A review of densified solid biomass for energy production. Renew Sustain Energy Rev 96:296–305. https://doi.org/10.1016/j.rser.2018.07.040CrossRef

28.

Fuchigami Y, Hara K, Kurimoto S (2016) Analysis of effect on CO₂ emission reduction and cost estimation for the use of Bio-Coke: a case study of Osaka, Japan. J Wood Sci 62:93–100. https://doi.org/10.1007/s10086-015-1515-6CrossRef

29.

Mansor AM, Theo WL, Lim JS, Ani FN, Hashim H, Ho WS (2018) Potential commercialisation of biocoke production in Malaysia—a best evidence review. Renew Sustain Energy Rev 90:636–649. https://doi.org/10.1016/j.rser.2018.03.008CrossRef

30.

A review on biomass densification technologies for energy application. 2010. Available from https://citeseerx.ist.psu.edu/viewdoc/download?doi=10.1.1.691.8373&rep=rep1&type=pdf

31.

Priyanto DE, Ueno S, Kasai H, Mae K (2018) Rethinking the inherent moisture content of biomass: its ability for milling and upgrading. ACS Sustain Chem Eng 6:2905–2910. http://orcid.org/0000-0002-7262-9372

32.

Albashabsheh NT, Heier Stamm JL (2021) Optimization of lignocellulosic biomass-to-biofuel supply chains with densification: literature review. Biomass Bioenergy 144:105888. https://doi.org/10.1016/j.biombioe.2020.105888CrossRef

33.

Tumuluru JS, Wright CT, Kenny KL, Hess JR (2011) A review of biomass densification systems to develop uniform feedstock commodities for bioenergy application. Biofuels Bioprod Biorefin 5:720. https://doi.org/10.1002/bbb.324CrossRef

34.

Ibitoye SE, Jen T-C, Mahamood RM, Akinlabi ET (2021) Densification of agro-residues for sustainable energy generation: an overview. Bioresour Bioprocess 8:75. https://doi.org/10.1186/s40643-021-00427-wCrossRef

35.

Frodeson S, Henriksson G, Berghel J (2019) Effects of moisture content during densification of biomass pellets, focusing on polysaccharide substances. Biomass Bioenergy 122:322–330. https://doi.org/10.1016/j.biombioe.2019.01.048CrossRef

36.

Mani S, Tabil L, Sokhansanj S (2004) Evaluation of compaction equations applied to four biomass species. Can Biosyst Eng 46:3.55-3.61

37.

Frodeson S, Henriksson G, Berghel J (2018) Pelletizing pure biomass substances to investigate the mechanical properties and bonding mechanisms. BioResources 13:1202–1222. https://doi.org/10.15376/biores.13.1.1202-1222CrossRef

38.

Lee Y-W, Ryu C, Lee W-J, Park Y-K (2011) Assessment of wood pellet combustion in a domestic stove. J Mater Cycles Waste Manag 13:165–172. https://doi.org/10.1007/s10163-011-0014-0CrossRef

39.

What Are Pellets? (2021) Available from https://www.pelletheat.org/what-are-pellets

40.

Yılmaz H, Çanakcı M, Topakcı M, Karayel D (2021) The effect of raw material moisture and particle size on agri-pellet production parameters and physical properties: a case study for greenhouse melon residues. Biomass Bioenergy 150:106125. https://doi.org/10.1016/j.biombioe.2021.106125CrossRef

41.

Samomssa I, Nono YJ, Cârâc G, Gurău G, Dinică MR, Kamga R (2021) Optimization of fuel briquette production from cassava peels, plantain peels and corn cobs. J Mater Cycles Waste Manag 23:1905–1917. https://doi.org/10.1007/s10163-021-01260-1CrossRef

42.

Mitchell EJS, Gudka B, Whittaker C, Shield I, Price-Allison A, Maxwell D et al (2020) The use of agricultural residues, wood briquettes and logs for small-scale domestic heating. Fuel Process Technol 210:106552. https://doi.org/10.1016/j.fuproc.2020.106552CrossRef

43.

Thiruvenkadam S, Izhar S, Yoshida H, Danquah MK, Harun R (2015) Process application of Subcritical Water Extraction (SWE) for algal bio-products and biofuels production. Appl Energy 154:815–828. https://doi.org/10.1016/j.apenergy.2015.05.076CrossRef

44.

Tagami-Kanada N, Mizuno S, Cherdkeattikul S, Ida T (2021) Estimation of maximum Bio-Coke compressive strength based on chemical composition. Mech Eng J 8:20–00391. https://doi.org/10.1299/mej.20-00391CrossRef

45.

Mizuno S, Ida T, Fuchihata M (2011) A study of physical properties of high-density solid biomass, Bio-Coke, with unutilized biomass. J Jpn Soc Exp Mech (JSEM) 11:s19–s24. https://doi.org/10.11395/jjsem.11.s19CrossRef

46.

Khorasgani NB, Sengul AB, Asmatulu E (2020) Briquetting grass and tree leaf biomass for sustainable production of future fuels. Biomass Convers Biorefin 10:915–924. https://doi.org/10.1007/s13399-019-00465-7CrossRef

47.

Mitchual SJ, Frimpong-Mensah K, Darkwa NA (2013) Effect of species, particle size and compacting pressure on relaxed density and compressive strength of fuel briquettes. Int J Energy Environ Eng 4:30. https://doi.org/10.1186/2251-6832-4-30CrossRef

48.

Tumuluru JS (2018) Effect of pellet die diameter on density and durability of pellets made from high moisture woody and herbaceous biomass. Carbon Resour Convers 1:44–54. https://doi.org/10.1016/j.crcon.2018.06.002CrossRef

49.

Ida T (2022) Bio-Coke—a foundation of a renewable energy society based on new solid bioenergy. Corona Publishing Co. Ltd., Beijing (in Japanese)

50.

Mohd Isa MAA (2019) Influences of raw material characteristics on mechanical properties of blended Bio-Coke. Kindai University, Higashiosaka

51.

Simple ways to check wood pellet quality. COFORD. 2007. Available from http://www.coford.ie/media/coford/content/publications/projectreports/cofordconnects/ccncheckpelletquality.pdf

52.

Haapakangas J (2016) Coke properties in simulated blast furnace conditions. University of Oulu, Oulu

53.

Taylor S, Lester E, Giddings D, Williams O, Kingman S, Eastwick C (2018) Applicability of mechanical tests for biomass pellet characterisation for bioenergy applications. Materials 11:1329. https://doi.org/10.3390/ma11081329CrossRef

54.

Odusote J (2017) Mechanical and combustion characteristics of oil palm biomass fuel briquette. J Eng Technol 8:14–29

55.

Liu S, Shangguan J, Yang S, Du W, Yan X, Zhang K (2019) Producing effective and clean coke for household combustion activities to reduce gaseous pollutant emissions. J Chem 2019:7142804. https://doi.org/10.1155/2019/7142804CrossRef

56.

Restuccia F, Fernandez-Anez N, Rein G (2019) Experimental measurement of particle size effects on the self-heating ignition of biomass piles: homogeneous samples of dust and pellets. Fuel 256:115838. https://doi.org/10.1016/j.fuel.2019.115838CrossRef

57.

Telmo C, Lousada J (2011) Heating values of wood pellets from different species. Biomass Bioenergy 35:2634–2639. https://doi.org/10.1016/j.biombioe.2011.02.043CrossRef

58.

Nakahara T, Yan H, Ito H, Fujita O (2015) Study on one-dimensional steady combustion of highly densified biomass briquette (Bio-Coke) in air flow. Proc Combust Inst 35:2415–2422. https://doi.org/10.1016/j.proci.2014.08.013CrossRef

59.

Contreras-Trejo JC, Vega-Nieva DJ, Heya MN, Prieto-Ruíz JA, Nava-Berúmen CA, Carrillo-Parra A (2022) Sintering and fusibility risks of pellet ash from different sources at different combustion temperatures. Energies 15:5026. https://doi.org/10.3390/en15145026CrossRef

60.

Maia BGdO, Souza O, Marangoni C, Hotza D, Oliveira APNd, Sellin N (2014) Production and characterization of fuel briquettes from banana leaves waste. Chem Eng Trans 37:439–444. https://doi.org/10.3303/CET1437074CrossRef

61.

Graham S, Eastwick C, Snape C, Quick W (2017) Mechanical degradation of biomass wood pellets during long term stockpile storage. Fuel Process Technol 160:143–151. https://doi.org/10.1016/j.fuproc.2017.02.017CrossRef

62.

Kang S, Sim B, Kim J (2017) Volume and mass measurement of a burning wood pellet by image processing. Energies 10:603. https://doi.org/10.3390/en10050603CrossRef

63.

Obernberger I, Thek G (2004) Physical characterisation and chemical composition of densified biomass fuels with regard to their combustion behaviour. Biomass Bioenergy 27:653–669. https://doi.org/10.1016/j.biombioe.2003.07.006CrossRef

64.

Szymajda A, Łaska G (2019) The effect of moisture and ash on the calorific value of cow dung biomass. Multidiscip Digit Publ Inst Proc 16:4. https://doi.org/10.3390/proceedings2019016004CrossRef

65.

Ohashi K, Sasauchi KI, Mizuno S, Ida T, Yamanishi H (2015) A study for safety storage stability of radioactive cesium based on high density volume reduction technology. Sumato Purosesu Gakkai-Shi 4:307–311

66.

Ito H, Sakai Y, Ida T, Nakamura Y, Fujita O (2011) Combustion of Bio-Coke (highly densified biomass fuel) block in high-temperature air flow

67.

Japan Coal Energy Center (JCOAL) (2017) Long-term demonstration of 25% reduction in CO₂ emissions at general waste treatment facilities using multi-raw material Bio-Cokes. Japan Coal Energy Center (JCOAL), Tokyo

68.

Bargiacchi E, Thonemann N, Geldermann J, Antonelli M, Desideri U (2020) Life cycle assessment of synthetic natural gas production from different CO₂ sources: a cradle-to-gate study. Energies 13:4579CrossRef

69.

Clarke S, Preto F (2011) Biomass densification for energy production. Fact Sheet

70.

Biomass advantages and disadvantages. 2021. Available from https://www.syntechbioenergy.com/blog/biomass-advantages-disadvantages

71.

Ida T, Mizuno S, Yamanishi H, Ohashi K, Taniguchi M, Ki S (2014) Research on renewable energy and stockpile by Bio-Coke technology of pollution biomass. Jpn Soc Mech Eng 2014:J0540204. https://doi.org/10.1299/jsmemecj.2014._J0540204-CrossRef

72.

Cherdkeattikul S, Ida T (2019) The influence of additional hemicellulose on Japanese cedar based pre-carbonized solid biofuel properties. Mech Eng J. https://doi.org/10.1299/mej.19-00282CrossRef

73.

Shaaban A, Se S-M, Ibrahim IM, Ahsan Q (2015) Preparation of rubber wood sawdust-based activated carbon and its use as a filler of polyurethane matrix composites for microwave absorption. New Carbon Mater 30:167–175. https://doi.org/10.1016/S1872-5805(15)60182-2CrossRef

74.

Chaichanawong J (2015) Production of Biocoke for industry from rubber wood sawdust. Thai-Nichi Institute of Technology, Bangkok

75.

Kamal Baharin NS (2018) Influence for thermal decomposition with biochemistry in bio-solidification process. Kindai University, Higashiosaka

76.

Torii Y, Mizuno S, Nishi K, Ichino Y, Ohmasa M, Sawai T et al (2012) Forming characteristics of Bio-Coke with a mixture of bamboo and carbonized Japanese cedar. J Smart Process 1:63–70. https://doi.org/10.7791/jspmee.1.63CrossRef

77.

Koesoemadinata VC, Chou K, Baharin NSK, Yahya WJ, Yuzir MAM, Akhir FNM et al (2021) The effectiveness of biological pretreatment of oil palm empty fruit bunch on its conversion into Bio-Coke. Bioresour Technol Rep 15:100765. https://doi.org/10.1016/j.biteb.2021.100765CrossRef

78.

Saisermsak P, Chaichanawong J (2020) Effect of forming temperature on properties of biocoke from palm oil residues. IOP Confer Ser Mater Sci Eng 778:012025. https://doi.org/10.1088/1757-899x/778/1/012025CrossRef

79.

Muhammad SBR, Ida T, Mizuno S (2016) Compressive strength properties of mixed Bio-Coke made from palm leaves and coconut shell. In: Proceedings of the environmental engineering comprehensive symposium 2016, vol 26, p 206. https://doi.org/10.1299/jsmeenv.2016.26.206

80.

Lersin W, Fakkao M, Cerdkeadttikul S, Ida T, Chaichanawong J (2021) Investigation of the potential for Biocoke production from the coconut shell. In: 2021 6th International conference on business and industrial research (ICBIR), pp 165–168. https://doi.org/10.1109/icbir52339.2021.9465858

81.

Kamal Baharin NS, Koesoemadinata V, Nakamura S, Azman NF, Yuzir M, Md Akhir F et al (2020) Production of Bio-Coke from spent mushroom substrate for a sustainable solid fuel. Biomass Convers Biorefin. https://doi.org/10.1007/s13399-020-00844-5CrossRef

82.

Murata H, Hanaka N, Mizuno S, Sanchez E Jr, Namba K, Ida T (2014) Forming properties of Bio-Coke using fruit peels as raw material: effective utilization of unused biomass resources obtained from imported fruit from ASEAN countries. J Smart Process 3:276–282. https://doi.org/10.7791/jspmee.3.276CrossRef

83.

Wongsuwan W, Burapornpong S, Supachutikul P, Cherdkeattikul S, Nantasaksiri K, Chaichanawong J (2015) OS24-10 effect of temperature on properties of Biocoke from soybean residues (Bio-Coke characteristics, OS24 Scale modeling, fluid and thermodynamic). In: The abstracts of ATEM: international conference on advanced technology in experimental mechanics: Asian conference on experimental mechanics 2015, vol 14, p 298. https://doi.org/10.1299/jsmeatem.2015.14.298

84.

Chaichanawong J, Cherdkeattikul S, Supachutikul P (2015) OS24-8 preparation of Biocoke from coffee grounds (invited, Bio-Coke characteristics, OS24 Scale modeling, fluid and thermodynamic). In: The abstracts of ATEM: international conference on advanced technology in experimental mechanics: Asian conference on experimental mechanics 2015, vol 14, p 296. https://doi.org/10.1299/jsmeatem.2015.14.296

85.

Solomon S, Li Y-R (2016) Editorial—The sugar industry of Asian region. Sugar Tech 18:557–558. https://doi.org/10.1007/s12355-016-0500-8CrossRef

86.

Rezania S, Md Din MF, Kamaruddin SF, Taib SM, Singh L, Yong EL et al (2016) Evaluation of water hyacinth (Eichhornia crassipes) as a potential raw material source for briquette production. Energy 111:768–773. https://doi.org/10.1016/j.energy.2016.06.026CrossRef

87.

Chang SH (2014) An overview of empty fruit bunch from oil palm as feedstock for bio-oil production. Biomass Bioenergy 62:174–181. https://doi.org/10.1016/j.biombioe.2014.01.002CrossRef

88.

Nuriana W, Suryanto A, Kamal M (2019) Calorific value analysis, reduction of period weight, reaction rate, activation energy of old coconut, young coconut waste briquette burning, cocoa. IOP Confer Ser Mater Sci Eng 588:012004. https://doi.org/10.1088/1757-899x/588/1/012004CrossRef

89.

Converting pineapple waste into biogas. 2022. Available from https://www.lipp-system.de/wp-content/uploads/Philippinen_BJ_engl._1_21.pdf

90.

Handra N, Kasim A, Gunawarman G, Santosa S (2020) Effect of heating temperature on quality of bio-briquette empty fruit bunch fiber. Int J Adv Appl Sci 9:192. https://doi.org/10.11591/ijaas.v9.i3.pp192-200CrossRef

91.

Nielsen NPK, Gardner D, Poulsen T, Felby C (2009) Importance of temperature, moisture content, and species for the conversion process of wood residues into fuel pellets. Wood Fiber Sci 41:414–425

92.

Kaliyan N, Vance Morey R (2009) Factors affecting strength and durability of densified biomass products. Biomass Bioenergy 33:337–359. https://doi.org/10.1016/j.biombioe.2008.08.005CrossRef

93.

Said N, Abdel Daiem MM, García-Maraver A, Zamorano M (2015) Influence of densification parameters on quality properties of rice straw pellets. Fuel Process Technol 138:56–64. https://doi.org/10.1016/j.fuproc.2015.05.011CrossRef

94.

Ungureanu N, Vladut V, Voicu G, Dinca M-N, Zăbavă B-Ș (2018) Influence of biomass moisture content on pellet properties—review. Eng Rural Dev 17:1876–1883

95.

Riva L, Nielsen H, Skreiberg Ø, Wang L, Bartocci P, Barbanera M et al (2019) Analysis of optimal temperature, pressure and binder quantity for the production of biocarbon pellet to be used as a substitute for coke. Appl Energy 256:113933. https://doi.org/10.1016/j.apenergy.2019.113933CrossRef

96.

Kimura T, Hirose T, Ye X, Sonoki T, Oda A, Zhang S (2018) Effects of molding pressures on physical and chemical changes in Bio-Coke produced from wood biomass. J Soc Mater Eng Resour Jpn 29:7–11. https://doi.org/10.5188/sjsmerj.29.1_2_7CrossRef

97.

Tumuluru JS, Heikkila D (2019) Biomass grinding process optimization using response surface methodology and a hybrid genetic algorithm. Bioengineering 6:12. https://doi.org/10.3390/bioengineering6010012CrossRef

98.

Yub Harun N, Afzal MT (2016) Effect of particle size on mechanical properties of pellets made from biomass blends. Procedia Eng 148:93–99. https://doi.org/10.1016/j.proeng.2016.06.445CrossRef

99.

Yumak H, Ucar T, Seyidbekiroglu N (2010) Briquetting soda weed (Salsola tragus) to be used as a rural fuel source. Biomass Bioenergy 34:630–636. https://doi.org/10.1016/j.biombioe.2010.01.006CrossRef

100.

Mizuno S, Hamidun OBIN, Ida T, Fuchihata M, Fumoto T, Namba K (2014) Effect of crushing particle size on cold/hot compressive strength of high-density and high-hardness solid fuel produced from raw rice husk. J Smart Process 3:269–275. https://doi.org/10.7791/jspmee.3.269CrossRef

101.

Gao W, Tabil LG, Dumonceaux T, Espinel Ríos S, Zhao R (2017) Optimization of biological pretreatment to enhance the quality of wheat straw pellets. Biomass Bioenergy 97:77–89. https://doi.org/10.1016/j.biombioe.2016.12.012CrossRef

102.

Ahn BJ, Chang H-s, Lee SM, Choi DH, Cho ST, Han G-s et al (2014) Effect of binders on the durability of wood pellets fabricated from Larix kaemferi C. and Liriodendron tulipifera L. sawdust. Renew Energy 62:18–23. https://doi.org/10.1016/j.renene.2013.06.038CrossRef

103.

Mišljenović N, Čolović R, Vukmirović Đ, Brlek T, Bringas CS (2016) The effects of sugar beet molasses on wheat straw pelleting and pellet quality. A comparative study of pelleting by using a single pellet press and a pilot-scale pellet press. Fuel Process Technol 144:220–229. https://doi.org/10.1016/j.fuproc.2016.01.001CrossRef

104.

Surdi de Castro PG, de Siqueira HF, de Castro VR, Zanuncio AJV, Zanuncio JC, Berger MDS et al (2021) Quality of Pinus sp. pellets with kraft lignin and starch addition. Sci Rep 11:900. https://doi.org/10.1038/s41598-020-78918-7CrossRef

105.

Poudel J, Karki S, Oh SC (2018) Valorization of waste wood as a solid fuel by torrefaction. Energies 11:1641. https://doi.org/10.3390/en11071641CrossRef

106.

Setkit N, Li X, Yao H, Worasuwannarak N (2021) Torrefaction behavior of hot-pressed pellets prepared from leucaena wood. Bioresour Technol 321:124502. https://doi.org/10.1016/j.biortech.2020.124502CrossRef

107.

Uche Paul O, Obanor A, Aliu S, Ighodaro O (2019) Proximate and ultimate analysis of fuel pellets from oil palm residues. Niger J Technol 36:987–990. https://doi.org/10.4314/njt.v36i3.44CrossRef

108.

Tumuluru JS, Ghiasi B, Soelberg NR, Sokhansanj S (2021) Biomass torrefaction process, product properties, reactor types, and moving bed reactor design concepts. Front Energy Res 9:728140. https://doi.org/10.3389/fenrg.2021.728140CrossRef

109.

Felfli FF, Luengo CA, Suárez JA, Beatón PA (2005) Wood briquette torrefaction. Energy Sustain Dev 9:19–22. https://doi.org/10.1016/S0973-0826(08)60519-0CrossRef

110.

Wang C, Peng J, Li H, Bi XT, Legros R, Lim CJ et al (2013) Oxidative torrefaction of biomass residues and densification of torrefied sawdust to pellets. Bioresour Technol 127:318–325. https://doi.org/10.1016/j.biortech.2012.09.092CrossRef

111.

Adhikari BB, Chae M, Zhu C, Khan A, Harfield D, Choi P et al (2019) Pelletization of torrefied wood using a proteinaceous binder developed from hydrolyzed specified risk materials. Processes 7:229. https://doi.org/10.3390/pr7040229CrossRef

112.

Tagami N, Fb MN, Nakadate T, Namba K, Ida T (2016) A study of influence of the torrefaction processing on combustion properties of the powders Bio-Coke. J Smart Process 5:171–178. https://doi.org/10.7791/jspmee.5.171CrossRef

113.

Dishwar RK, Mandal AK, Sinha OP (2021) Studies on reduction behaviour of highly fluxed iron ore pellets for application in steelmaking. Mater Today Proc 46:1471–1475. https://doi.org/10.1016/j.matpr.2020.10.886CrossRef

114.

Isnugroho K, Birawidha DC (2018) The production of pig iron from crushing plant waste using hot blast cupola. Alex Eng J 57:427–433. https://doi.org/10.1016/j.aej.2016.11.004CrossRef

115.

Jaimes W, Maroufi S (2020) Sustainability in steelmaking. Curr Opin Green Sustain Chem 24:42–47. https://doi.org/10.1016/j.cogsc.2020.01.002CrossRef

116.

Usage of wood pellet. 2004. Available from https://www.pelletclub.jp/en/pellet/use.html

117.

Khanh Toan P, Duc Cuong N, Thi Quy N, Kim SP (2000) Chapter 295—Application of briquetting technology to produce briquettes from agricultural residues and by-products. In: Sayigh AAM (ed) World renewable energy Congress VI. Pergamon, Oxford, pp 1416–1419CrossRef

118.

Kongprasert N, Wangphanich P, Jutilarptavorn A (2019) Charcoal briquettes from Madan wood waste as an alternative energy in Thailand. Procedia Manuf 30:128–135. https://doi.org/10.1016/j.promfg.2019.02.019CrossRef

119.

Antwi-Boasiako C, Acheampong BB (2016) Strength properties and calorific values of sawdust-briquettes as wood-residue energy generation source from tropical hardwoods of different densities. Biomass Bioenergy 85:144–152. https://doi.org/10.1016/j.biombioe.2015.12.006CrossRef

120.

Ståhl M, Wikström F (2009) Swedish perspective on wood fuel pellets for household heating: a modified standard for pellets could reduce end-user problems. Biomass Bioenergy 33:803–809. https://doi.org/10.1016/j.biombioe.2008.12.003CrossRef

121.

Thomson H, Liddell C (2015) The suitability of wood pellet heating for domestic households: a review of literature. Renew Sustain Energy Rev 42:1362–1369. https://doi.org/10.1016/j.rser.2014.11.009CrossRef

122.

Bio-Coke manufacture facility. 2021. Available from https://www.naniwaroki.co.jp/en/product/biocoke/

123.

Ida T (2021) Kindai University Bio-Coke research institute progress report 2021. Kindai University, Higashiosaka

124.

Bio-Coke—Advanced biomass fuel. 2016. Available from https://www.youtube.com/watch?v=8E3NjT-HWLo

125.

The feasibility study of Bio-Coke production and distribution business. 2013. Available from https://openjicareport.jica.go.jp/pdf/12124871.pdf

126.

Chaichanawong J, Ida T (2019) Current situation of biomass energy and development of Biocoke technology in Thailand. J Smart Process 8:235–242. https://doi.org/10.7791/jspmee.8.235CrossRef

127.

Bio-Coke (2021) Available from http://www.jcoal.or.jp/event/upload/biocoke.pdf

128.

Kobe City to Start Test Production of Biofuels from Coffee Grounds. 2017. Available from https://www.japanfs.org/sp/en/news/archives/news_id035802.html

129.

JFE to Demonstrate Biocoke Utilization at Shaft-Type Gasifying and Direct Melting Furnace in Singapore—In collaboration with Nanyang Technological University and Kinki University. 2021. Available from https://www.jfe-eng.co.jp/en/news/2021/20210303.html

130.

Krishnan S, Md Din MF, Mat Taib S, Kamaludin NH, Hanafi N, Ida T et al (2019) Conversion of landscape waste into Bio-Coke solid fuel. Green Eng Campus Sustain. https://doi.org/10.1007/978-981-13-7260-5_8CrossRef

131.

Sultana A, Kumar A, Harfield D (2010) Development of agri-pellet production cost and optimum size. Bioresour Technol 101:5609–5621. https://doi.org/10.1016/j.biortech.2010.02.011CrossRef

132.

Nolan A, Mc Donnell K, Devlin JG, Carroll PJ, Finnan J (2010) Economic analysis of manufacturing costs of pellet production in the Republic of Ireland using non-woody biomass. Open Renew Energy J 3:1–11. https://doi.org/10.2174/1876387101003010001CrossRef

133.

Hoque M, Sokhansanj S, Mani S, Jafari L, Lim J, Zaini P et al (2006) Economics of pellet production for export market

134.

Stolarski MJ, Szczukowski S, Tworkowski J, Krzyżaniak M, Gulczyński P, Mleczek M (2013) Comparison of quality and production cost of briquettes made from agricultural and forest origin biomass. Renew Energy 57:20–26. https://doi.org/10.1016/j.renene.2013.01.005CrossRef

135.

APEC Energy Working Group (2017) Heating applications of bio-pellet to enhance utilization of renewable energy in the APEC region. Asia-Pacific Economic Cooperation, Canberra

136.

Eriksson G, Athanassiadis D, Bergström D, Nordfjell T, Bergsten U (2012) Production costs and markets for pellet chips: case studies in Northern Sweden. Int J For Res 2012:302014. https://doi.org/10.1155/2012/302014CrossRef

137.

Haque N, Somerville M (2013) Techno-economic and environmental evaluation of biomass dryer. Procedia Eng 56:650–655. https://doi.org/10.1016/j.proeng.2013.03.173CrossRef

138.

Antar M, Lyu D, Nazari M, Shah A, Zhou X, Smith DL (2021) Biomass for a sustainable bioeconomy: an overview of world biomass production and utilization. Renew Sustain Energy Rev 139:110691. https://doi.org/10.1016/j.rser.2020.110691CrossRef

139.

Malaysia’s Biomass Potential (2012) Available from: https://www.besustainablemagazine.com/cms2/malaysias-biomass-potential/

140.

Purnomo H, Okarda B, Shantiko B, Achdiawan R, Dermawan A, Kartodiharjo H et al (2019) Forest and land fires, toxic haze and local politics in Indonesia. Int For Rev 21:486–500. https://doi.org/10.1505/146554819827906799CrossRef

141.

Carlos RM, Ba Khang D (2008) Characterization of biomass energy projects in Southeast Asia. Biomass Bioenergy 32:525–532. https://doi.org/10.1016/j.biombioe.2007.11.005CrossRef

142.

Barz M (2011) Agricultural residues as promising biofuels for biomass power generation in Thailand. J Sustain Energy Environ Spec Issue 21:27

143.

ASEAN (2021) ASEAN strategy on sustainable biomass energy for agriculture communities and rural development in 2020–2030. ASEAN, Jakarta

Titel: Impact and effectiveness of Bio-Coke conversion from biomass waste as alternative source of coal coke in Southeast Asia
verfasst von: Nur Syahirah Kamal Baharin
Supitchaya Cherdkeattikul
Nami Kanada
Hirofumi Hara
Satoru Mizuno
Toru Sawai
Manabu Fuchihata
Tamio Ida
Publikationsdatum: 07.11.2022
Verlag: Springer Japan
Erschienen in: Journal of Material Cycles and Waste Management / Ausgabe 1/2023
Print ISSN: 1438-4957
Elektronische ISSN: 1611-8227
DOI: https://doi.org/10.1007/s10163-022-01539-x

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 1/2023

Evaluation of properties and composition of the mixed municipal waste fine fraction, the case study of Czech Republic

Material conversion from used oil sorbents by pyrolysis

A low-cost process for efficient hydrolysis of deoiled rice bran and ethanol production using an inhouse produced multi-enzyme preparation from Aspergillus niger P-19

Analysis of emergency situations at municipal solid waste landfills

A novel mechanical plant compression system for biomass fuel and acquisition of squeezed liquid with water-soluble lignin as anti-virus materials

Performance evaluation of dolomite production waste in development of sustainable concrete: hardened properties and ecological assessment