nach oben

Clean Technologies and Environmental Policy

Erschienen in:

20.07.2023 | Original Paper

Introduction of blown plate heat exchanger for cabinet cooling system

verfasst von: Saranmanduh Borjigin, Wang Fu, Huijie Wang, Wenlong Liang, Jianlong Ma, Keqilao Meng, Hexi Baoyin

Erschienen in: Clean Technologies and Environmental Policy | Ausgabe 1/2024

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Surface heat exchanger is extensively used for sustainable development in energy systems. In the surface heat exchanger, the heat transfers from hot flow to cold flow through separating solid surface. The heat transfer area of surface heat exchanger is usually constant when it is performing in energy system. Similarly, fixed plate heat exchanger is applied in electronic outdoor cabinet. In this paper, a novel approach to vary the heat transfer surface in heat exchanger is proposed. A blown plate heat exchanger is introduced for cabinet cooling system. The blown and fixed plate heat exchangers are compared. The heat transfer performances of the blown plate heat exchangers are the same with fixed plate heat exchanger for the same Reynolds numbers. For different Reynolds numbers, the blown plate heat exchanger with all mixed plates has the best performance and the temperature reduction of hot air is arrived 15.185 K, when the maximum temperature difference is 20 K.

Graphical Abstract

Vorheriger Artikel A conceptual model for a circular city: a case study of Maribor, Slovenia

Nächster Artikel The utilization of bio-ethanol for production of 1-butanol catalysed by Mg–Al mixed metal oxides enhanced by Cu or Co

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Nur mit Berechtigung zugänglich

Abbasi HR, Sedeh ES, Pourrahmani H, Mohammadi MH (2020) Shape optimization of segmental porous baffles for enhanced thermo-hydraulic performance of shell-and-tube heat exchanger. Appl Therm Eng 180:115835. https://doi.org/10.1016/j.applthermaleng.2020.115835CrossRef

Altwieb M, Mishra R, Aliyu AM, Kubiak KJ (2022) Heat transfer enhancement by perforated and louvred fin heat exchangers. Energies 15(2):400. https://doi.org/10.3390/en15020400CrossRef

Arsenyeva O, Piper M, Zibart A, Olenberg A, Kenig EY (2019) Investigation of heat transfer and hydraulic resistance in small-scale pillow-plate heat exchangers. Energy 181:1213–1224. https://doi.org/10.1016/j.energy.2019.05.099CrossRef

Bahiraei M, Naseri M, Monavari A (2022) Thermal-hydraulic performance of a nanofluid in a shell-and-tube heat exchanger equipped with new trapezoidal inclined baffles: nanoparticle shape effect. Powder Technol 395:348–359. https://doi.org/10.1016/j.powtec.2021.09.009CrossRef

Borjigin S, Ma T, Zeng M, Wang QW (2018) A numerical study of small-scale longitudinal heat conduction in plate heat exchangers. Energies 11(7):1727. https://doi.org/10.3390/en11071727CrossRef

Borjigin S, Zhang SX, Ma T, Zeng M, Wang QW (2019) Coupling ε-NTU method for thermal design of heat exchanger in cabinet cooling system. Appl Therm Eng 159:113972. https://doi.org/10.1016/j.applthermaleng.2019.113972CrossRef

Borjigin S, Zhang SX, Ma T, Zeng M, Wang QW (2020) Performance enhancement of cabinet cooling system by utilizing cross-flow plate heat exchanger. Energ Convers Manage 213:112854. https://doi.org/10.1016/j.enconman.2020.112854CrossRef

Borjigin S, Ma T, Zeng M, Wang QW (2023) The effect of longitudinal heat conduction on thermal enhancement of plastic plate heat exchangers. Heat Transfer Eng. https://doi.org/10.1080/01457632.2023.2213994CrossRef

Chang HL, Lian J, Ma T, Li L, Wang QW (2021) Design and optimization of an annular air-hydrogen precooler for advanced space launchers engines. Energ Convers Manage 241:114279. https://doi.org/10.1016/j.enconman.2021.114279CrossRef

Chu WX, Vicidomini M, Calise F, Duić N, Østergaard PA, Wang QW, Carvalho MDG (2022) Recent advances in technologies, methods, and economic analysis for sustainable development of energy, water, and environment systems. Energies 15(19):7129. https://doi.org/10.3390/en15197129CrossRef

Elyyan MA, Rozati A, Tafti DK (2008) Investigation of dimpled fins for heat transfer enhancement in compact heat exchangers. Int J Heat Mass Tran 51(11–12):2950–2966. https://doi.org/10.1016/j.ijheatmasstransfer.2007.09.013CrossRef

Hosseini H, Ashrafi MMA, Asadi Z, Ganji DD (2021) Development in household water heaters by replacing the shell and tube heat exchangers by inclined flat ones having rectangular fins. Case Stud Therm Eng 28:101490. https://doi.org/10.1016/j.csite.2021.101490CrossRef

Hwang SD, Kwon HG, Cho HH (2008) Heat transfer with dimple/protrusion arrays in a rectangular duct with a low Reynolds number range. Int J Heat Fluid Fl 29(4):916–926. https://doi.org/10.1016/j.ijheatfluidflow.2008.01.004CrossRef

Hwang SD, Kwon HG, Cho HH (2010) Local heat transfer and thermal performance on periodically dimple-protrusion patterned walls for compact heat exchangers. Energy 35(12):5357–5364. https://doi.org/10.1016/j.energy.2010.07.022CrossRef

Jige D, Sugihara K, Inoue N (2022) Evaporation heat transfer and flow characteristics of vertical upward flow in a plate-fin heat exchanger. Int J Refrig 133:165–171. https://doi.org/10.1016/j.ijrefrig.2021.09.030CrossRef

Jin ZL, Chen XT, Wang YQ, Liu MS (2014) Heat exchanger network synthesis based on environmental impact minimization. Clean Technol Environ Policy 16(1):183–187. https://doi.org/10.1007/s10098-013-0626-2CrossRef

Kapustenko P, Arsenyeva O, Fedorenko O, Kusakov S (2022) Integration of low-grade heat from exhaust gases into energy system of the enterprise. Clean Technol Environ Policy 24(1):67–76. https://doi.org/10.1007/s10098-021-02082-3CrossRef

Kedam N, Uglanov DA, Blagin EV, Gorshkalev AA (2021) Heat transfer factor j and friction factor f correlations for offset strip fin and wavy fin of compact plate-fin heat-exchangers. Case Stud Therm Eng 28:101552. https://doi.org/10.1016/j.csite.2021.101552CrossRef

Lara-Montaño OD, Gómez-Castro FI, Gutiérrez-Antonio C (2021) Comparison of the performance of different metaheuristic methods for the optimization of shell-and-tube heat exchangers. Comput Chem Eng 152:107403. https://doi.org/10.1016/j.compchemeng.2021.107403CrossRef

Li KJ, Wang S, Ke ZQ, Chen CL (2019) A novel caudal-fin-inspired hourglass-shaped self-agitator for air-side heat transfer enhancement in plate-fin heat exchanger. Energ Convers Manage 187:297–315. https://doi.org/10.1016/j.enconman.2019.03.048CrossRef

Li K, Wen J, Wang SM, Li YZ (2020) Multi-parameter optimization of serrated fins in plate-fin heat exchanger based on fluid-structure interaction. Appl Therm Eng 176:115357. https://doi.org/10.1016/j.applthermaleng.2020.115357CrossRef

Li H, Zou ZP, Li H, Chen YM, Fu C (2022) Thermal performance of a microchannel primary surface recuperator for portable microturbine generators: design and experimental study. Appl Therm Eng 206:118103. https://doi.org/10.1016/j.applthermaleng.2022.118103CrossRef

Lin SC, Huang CL (2002) An integrated experimental and numerical study of forward–curved centrifugal fan. Exp Therm Fluid Sci 26(5):421–434. https://doi.org/10.1016/S0894-1777(02)00112-7CrossRef

McDonald CF (2000) Low-cost compact primary surface recuperator concept for microturbines. Appl Therm Eng 20(5):471–497. https://doi.org/10.1016/S1359-4311(99)00033-2CrossRef

Ocłoń P, Łopata S, Stelmach T, Li MJ, Zhang JF, Mzad H, Tao WQ (2021) Design optimization of a high-temperature fin-and-tube heat exchanger manifold–a case study. Energy 215:119059. https://doi.org/10.1016/j.energy.2020.119059CrossRef

Piper M, Zibart A, Djakow E, Springer R, Homberg W, Kenig EY (2019) Heat transfer enhancement in pillow-plate heat exchangers with dimpled surfaces: A numerical study. Appl Therm Eng 153:142–146. https://doi.org/10.1016/j.applthermaleng.2019.02.082CrossRef

Qian ZQ, Wang Q, Lv S (2020) Research on the thermal hydraulic performance and entropy generation characteristics of finned tube heat exchanger with streamline tube. Energies 13(20):5408. https://doi.org/10.3390/en13205408CrossRef

Shirzad M, Delavar MA, Ajarostaghi SSM, Sedighi K (2019) Evaluation the effects of geometrical parameters on the performance of pillow plate heat exchanger. Chem Eng Res Des 150:74–83. https://doi.org/10.1016/j.cherd.2019.06.032CrossRef

Tang LH, Zeng M, Wang QW (2009) Experimental and numerical investigation on air-side performance of fin-and-tube heat exchangers with various fin patterns. Exp Therm Fluid Sci 33(5):818–827. https://doi.org/10.1016/j.expthermflusci.2009.02.008CrossRef

Tao WQ (2019) Heat transfer. Higher Education Press, Publisher Beijing, China ((5th ed.))

Utriainen E, Sundén B (2002) Evaluation of the cross corrugated and some other candidate heat transfer surfaces for microturbine recuperators. J Eng Gas Turbines Power 124(3):550–560. https://doi.org/10.1115/1.1456093CrossRef

Välikangas T, Folkersma M, Maso MD, Keskitalo T, Peltonen P, Vuorinen V (2022) Parametric CFD study for finding the optimal tube arrangement of a fin-and-tube heat exchanger with plain fins in a marine environment. Appl Therm Eng 200:117642. https://doi.org/10.1016/j.applthermaleng.2021.117642CrossRef

Wang QW, Zeng M, Ma T, Du XP, Yang JF (2014) Recent development and application of several high-efficiency surface heat exchangers for energy conversion and utilization. Appl Energy 135:748–777. https://doi.org/10.1016/j.apenergy.2014.05.004ADSCrossRef

Wang WQ, Qiu Y, Shi HYL, HY, (2019) Experimental study on the heat transfer performance of a molten-salt printed circuit heat exchanger with airfoil fins for concentrating solar power. Int J Heat Mass Tran 135:837–846. https://doi.org/10.1016/j.ijheatmasstransfer.2019.02.012CrossRef

Wang W, Shuai Y, Ding L, Li BX, Sundén B (2021) Investigation of complex flow and heat transfer mechanism in multi-tube heat exchanger with different arrangement corrugated tube. Int J Therm Sci 167:107010. https://doi.org/10.1016/j.ijthermalsci.2021.107010CrossRef

Wang JH, Shi HN, Zeng M, Ma T, Wang QW (2022a) Investigations on thermal–hydraulic performance and entropy generation characteristics of sinusoidal channeled printed circuit LNG vaporizer. Clean Technol Environ Policy 24(1):95–108. https://doi.org/10.1007/s10098-021-02084-1CrossRef

Wang W, Li BR, Tan YF, Li BX, Shuai Y (2022b) Multi-objective optimal design of NACA airfoil fin PCHE recuperator for micro-gas turbine systems. Appl Therm Eng 204:117864. https://doi.org/10.1016/j.applthermaleng.2021.117864CrossRef

Wen ZX, Lv YG, Li Q, Zhou P (2020) Numerical study on heat transfer behavior of wavy channel supercritical CO₂ printed circuit heat exchangers with different amplitude and wavelength parameters. Int J Heat Mass Tran 147:118922. https://doi.org/10.1016/j.ijheatmasstransfer.2019.118922CrossRef

Wen J, Li CL, Hao HW, Zhao X, Lei G, Wang SM, Li YZ (2021) Numerical investigation on fin configuration improvement of 2 K sub-atmospheric plate-fin heat exchangers for the superfluid helium cryogenic systems. Appl Therm Eng 196:117290. https://doi.org/10.1016/j.applthermaleng.2021.117290CrossRef

Wu JF, Liu P, Yu MJ, Liu ZC, Liu W (2022) Thermo-hydraulic performance and exergy analysis of a fin-and-tube heat exchanger with sinusoidal wavy winglet type vortex generators. Int J Therm Sci 172(A):107274. https://doi.org/10.1016/j.ijthermalsci.2021.107274CrossRef

Yang JF, Zeng M, Wang QW (2015) Numerical investigation on shell-side performances of combined parallel and serial two shell-pass shell-and-tube heat exchangers with continuous helical baffles. Appl Energy 139:163–174. https://doi.org/10.1016/j.apenergy.2014.11.029ADSCrossRef

Yang JF, Lin YS, Ke HB, Zeng M, Wang QW (2016) Investigation on combined multiple shell-pass shell-and-tube heat exchanger with continuous helical baffles. Energy 115(3):1572–1579. https://doi.org/10.1016/j.energy.2016.05.090CrossRef

Zhang X, Ge YT (2021) The effect of heat conduction through fins on the performance of finned-tube CO₂ supercritical gas coolers. Int J Heat Mass Tran 181:121908. https://doi.org/10.1016/j.ijheatmasstransfer.2021.121908CrossRef

Titel: Introduction of blown plate heat exchanger for cabinet cooling system
verfasst von: Saranmanduh Borjigin
Wang Fu
Huijie Wang
Wenlong Liang
Jianlong Ma
Keqilao Meng
Hexi Baoyin
Publikationsdatum: 20.07.2023
Verlag: Springer Berlin Heidelberg
Erschienen in: Clean Technologies and Environmental Policy / Ausgabe 1/2024
Print ISSN: 1618-954X
Elektronische ISSN: 1618-9558
DOI: https://doi.org/10.1007/s10098-023-02580-6

Springer Professional

Abstract

Graphical Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 1/2024

Techno-economic review of pyrolysis and gasification plants for thermochemical recovery of plastic waste and economic viability assessment of small-scale implementation

Recent advances in the use of ionic liquids in the CO2 conversion to CO and C2+ hydrocarbons

Reduction of carbon intensity of electrification by reservoir-to-wire integration with CO2 capture and storage: conceptual design and analysis

A methodology to characterize energy consumption in small and medium-sized enterprises at national level in European countries

The utilization of bio-ethanol for production of 1-butanol catalysed by Mg–Al mixed metal oxides enhanced by Cu or Co

Thermo-catalytic co-pyrolysis of waste plastic and hydrocarbon by-products using β-zeolite