nach oben

Erschienen in:

2019 | OriginalPaper | Buchkapitel

Laser Micromachining of Engineering Materials—A Review

verfasst von : Nadeem Faisal, Divya Zindani, Kaushik Kumar, Sumit Bhowmik

Erschienen in: Micro and Nano Machining of Engineering Materials

Verlag: Springer International Publishing

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Miniaturization has led to an increase in the use of micromachining processes. The need for the material processing at microatomic resolution at an economical cost has underpinned this technology in many industries. Laser micromachining is a precise noncontact type of machining process which is used in the fabrication of micro-components ranging up to 500 µm. Laser ablation distinctively focuses on the small elemental areas which helps to absorb a high percentage of energy. This chapter represents an overview of various researches carried out in laser machining fields, its applicability and the advancements made. It also shows the implementation of ultrashort and femtosecond pulsed laser micromachining. Laser micromachining has lot of advantages over conventional contact machining processes as for instance the machining of any workpiece material can be easily accomplished within predefined time. Femtosecond laser machining can machine even transparent materials like glass, sapphire. The analysis of various theoretical and experimental research is used to describe the performance of laser beam micromachining (LBMM) on some of the advanced engineering materials.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Vorheriges Kapitel Abrasive Waterjet Cutting of Lanthanum Phosphate—Yttria Composite: A Comparative Approach

Nächstes Kapitel Experimental Analysis of Wire EDM Process Parameters for Micromachining of High Carbon High Chromium Steel by Using MOORA Technique

B.E.A. Saleh, M.C. Teich, Fundamentals of Photonics, 2nd edn (Wiley, 2007). https://doi.org/10.1002/9783527635245.ch2CrossRef

S.C. Singh, H. Zeng, C. Guo, W. Cai, Lasers: fundamentals, types, and operations, in Nanomaterials: Processing and Characterization with Lasers (2012), pp. 1–34. https://doi.org/10.1002/9783527646821.ch1CrossRef

A.P. Kumar, Laser micromachining: technology and applications. Int. J. Eng. Res. Appl. (IJERA), ISSN: 2248-9622 National Conference on Advances in Engineering and Technology. (AET-29th March 2014)

Q. Bian, S. Chen, B.T. Kim, N. Leventis, H. Lu, Z. Chang, S. Lei, Micromachining of polyurea aerogel using femtosecond laser pulses. J. Non-Crystal. Solids 357(1), 186–193 (2011). https://doi.org/10.1016/j.jnoncrysol.2010.09.037CrossRef

U. Klotzbach, A.F. Lasagni, M. Panzner, V. Franke, Laser Micromachining, in Fabrication and Characterizationin the Micro-Nano Range, Advanced Structured Materials, ed. by F.A. Lasagni, A.F. Lasagni, vol. 10 (2011). https://doi.org/10.1007/978-3-642-17782-8_2CrossRef

U. Klotzbach, A.F. Lasagni, M. Panzner, V. Franke, Laser Micromach. Spr. 10, 29–119 (2011). https://doi.org/10.1007/978-3-642-17782-8CrossRef

H. KnowlesR, Karnakis G. RutterfordM, A.D. Ferguson, Micromachining of metals, ceramics and polymers using nanosecond lasers. Int. J. Adv. Manuf. Technol. 33, 95–102 (2007). https://doi.org/10.1007/s00170-007-0967-2CrossRef

T. Brettschneider, C. Dorrer, D. Czurratis, R. Zengerle, M. Daub, Laser micromachining as a metallization tool for micro fluidic polymer stacks. J. Micromech. Micro Eng. 23(3) (2013). https://doi.org/10.1088/0960-1317/23/3/035020CrossRef

R.P. Patel, D.M. Patel, Grey relational analysis based optimization of laser cutting process parameters for aluminum alloy—a review. Int. J. Eng. Res. Technol. (IJERT) 3(3) (2014). ISSN: 2278-0181

10.

M.R.M. Rejab, T.T. Mon, M.F.F. Rashid, N.S.M. Shalahim, M.F. Ismail, Virtual laser-micromachining of MEMS components. Int. J. Recent Trend. Eng. 1(5) (2009)

11.

A. Parashar, J.S. Mann, A. Shah, N.R. Sivakumar, Numerical and experimental study of interference based micromachining of stainless steel. JLMN-J. Laser Micro/ Nano-eng. 4(2) (2009)

12.

M. Manjaiah, S. Narendranath, S. Basavarajappa, Review on non-conventional machining of shape memory alloys. Trans. Nonferrous Metals Soc. China (English Edition) 24(1), 12–21 (2014). https://doi.org/10.1016/S1003-6326(14)63022-3CrossRef

13.

Y. Long, Q. Liu, Z. Zhong, L. Xiong, T. Shi, Experimental study on the processes of laser-enhanced electrochemical micromachining stainless steel. Optik 126(19), 1826–1829 (2015). https://doi.org/10.1016/j.ijleo.2015.05.019CrossRef

14.

S.N. Akhtar, S.A. Ramakrishna, J. Ramkumarv, Excimer laser micromachining for miniaturized hybrid microwave integrated circuits. Directions 15(1) (2015)

15.

A. Sen, B. Doloi, B. Bhattacharyya, Experimental studies on fibre laser micro-machining of Ti-6al-4v, in 5th International & 26th All India Manufacturing Technology, Design and Research conference (AIMTDR 2014), 14 Dec 2014

16.

N.S.M. Shalahim, T.T. Mon, M.F. Ismail, M.F.F. Rashid, M.R.M. Rejab, Finite Element Simulation of Laser-Micromachining”. Proceedings of the International Multi Conference of Engineers and Computer Scientists, IMECS 2010, vol. 3 (Hong Kong, 17–19 March 2010)

17.

C.K. Walker, G. Narayanan, H. Knoepfle, J. Capara, J. Glenn, A. Hungerford, T.M. Bloomstein, S.T. Palmacci, M.B. Stern, J.E. Curtin, Laser micromachining of silicon: a new technique for fabricating high quality terahertz waveguide components, in Proceedings of 8th international symposium on space terahertz technology (Harvard University, 1997), p. 358

18.

L. Slatineanu, M. Coteaţă, O. Dodun, A. Iosub, L. Apetrei, Impact phenomena in the case of some non-traditional machining processes, in Project No. ID 625 National Council of Scientific Research in Higher Education (Romania) (2008)CrossRef

19.

S. Mishra, V. Yadava, Laser beam micromachining (LBMM)—a review. Opt. Lasers Eng. (2015). https://doi.org/10.1016/j.optlaseng.2015.03.017CrossRef

20.

M.C. Gower, Industrial applications of laser micromachining. Opt. Exp. 7(2), 56–67 (2000). https://doi.org/10.1364/OE.7.000056CrossRef

21.

N. Bloembergen, Laser-material interactions; fundamentals and applications, in AIP Conference Proceedings, vol. 288. (1993), pp. 3–10. https://doi.org/10.1063/1.44887

22.

J.C. Miller, History, scope and the future of laser ablation, in Laser Ablation, Principles and Applications, ed. by J.C. Miller. Springer (1994)

23.

Y. Kawamura, K. Toyoda, S. Namba, Effective deep ultraviolet photoetching of polymethyl methacrylate by an excimer laser. Appl. Phys. Lett. 40(5), 374–375 (1982). https://doi.org/10.1063/1.93108CrossRef

24.

R. Srinivasan, V. Mayne-Banton, Self-developing photoetching of poly (ethylene terephthalate) films by far-ultraviolet excimer laser radiation. Appl. Phys. Lett. 41(6), 576–578 (1982). https://doi.org/10.1063/1.93601CrossRef

25.

B. Wilhelmi, J. Herrmann, Lasers for Ultrashort Light Pulses, OSTI-Identifier:5733239 (United States, 1987)

26.

M.S. Brown, C.B. Arnold, Fundamentals of laser-material interaction and application to multiscale surface modificatication. Springer Ser. Mat. Sci. 135(0933–033X), 91–120 (2010). https://doi.org/10.1007/978-3-642-10523-4.

27.

J.R. Lankard, G.E. Wolbold, Laser ablation of polyimide in a manufacturing facility. Appl. Phys. A54, 355 (1992)

28.

F.O. Olsen, L. Alting, Pulsed laser materials processing, ND-YAG versus CO₂ Lasers. CIRP Ann. Manuf. Technol. 44(1), 141–145 (1995). https://doi.org/10.1016/S0007-8506(07)62293-8CrossRef

29.

J. Meijer, Laser beam machining (LBM), state of the art and new opportunities. J. Mat. Process. Technol. 149, 2–17 (2004). https://doi.org/10.1016/j.jmatprotec.2004.02.003CrossRef

30.

X. Liu, D. Du, G. Mourou, Laser ablation and micromachining with ultrashort laser pulses. IEEE J. Quant. Electronics, 33(10), 1706–1716 (1997). https://doi.org/10.1109/3.631270CrossRef

31.

E. Ohmura, I. Fukumoto, Study on fusing and evaporating process of fcc metal due to laser irradiation using molecular dynamics. Int. J. Jpn. Soc. Precis. Eng. 30, 47–48 (1996)

32.

F.J. McClung, R.W. Hellwarth, Giant optical pulsations from ruby. J. Appl. Phys. 33(3), 828–829 (1962). https://doi.org/10.1063/1.1777174CrossRef

33.

R.S. Patel, T.F. Redmond, C. Tessler, D. Tudryn, D. Pulaski, Production benefits from excimer laser tools, in Laser Focus World (1996)

34.

C. Rowan, Excimer lasers drill precise holes with higher yields, in Laser Focus World (1995)

35.

M.C. Gower, Excimer lasers for surgery and biomedical fabrication, in Nanotechnology in Medicine and the Biosciences, ed. by R.R.H. Coombs, D.W. Robinson (Gordon & Breach, New York, 1996)

36.

B. Tan, K. Venkatakrishnan, Thermal coupling in multishot laser microvia drilling for interconnection application. J. Vac. Sci. Technol. B Microelectron. Nanometer Struct. 24, 211–215 (2006). https://doi.org/10.1116/1.2162573CrossRef

37.

J.N. Reddy, An Introduction to the Finite Element Method (McGraw-Hill, New York, USA, 2006). ISBN 9780072466850

38.

C.B. Arnold, A. Piqué, Laser Direct-Write Processing. MRS Bulletin 32, 15 (2007)

39.

K. Venkatakrishnan, B. Tan, N.R. Sivakumar, Submicron machining of metallic film by low influence ultrashort”. Opt. Laser Technol. 34, 575–578 (2002)CrossRef

40.

S.D. Allen, M. Bass, M.L. Teisniger, Comparison of pulsed Nd:YAG and pulsed CO₂ lasers for hole drilling in printed circuit board materials, in CLEO Conference Summary (1982)

41.

F. Bachman, Excimer lasers in a fabrication line for a highly integrated printed circuit board. Chemtronics 4, 149 (1989)

42.

P. Crosby, Get to know types of lasers, in Materials Processing Units from Coherent Inc. June 2002.

43.

J.P. Desbiens, P. Masson, ArF excimer laser micromachining of Pyrex, SiC and PZT for rapid prototyping of MEMS components. Sens. Actuators A Phys. 136(2), 554–563 (2007). https://doi.org/10.1016/j.sna.2007.01.002CrossRef

44.

W.S. Lau, W.B. Lee, S.Q. Pang, Pulsed Nd: YAG laser cutting of carbon fibre composite materials. CIRP Ann. Manuf. Technol. 39(1), 179–182 (1990). https://doi.org/10.1016/S0007-8506(07)61030-0CrossRef

45.

J. Meijer, K. Du, A. Gillner, D. Hoffmann, V.S. Kovalenko, T. Masuzawa, W. Schulz, Laser machining by short and ultrashort pulses, state of the art and new opportunities in the age of the photons. CIRP Ann. Manuf. Technol. 51(2), 531–550 (2002). https://doi.org/10.1016/S0007-8506(07)61699-0CrossRef

46.

H.W. Mocker, R.J. Collins, Mode competition and self-locking effects in a q-switched ruby laser. Appl. Phys. Lett. 7(10), 270–273 (1965). https://doi.org/10.1063/1.1754253CrossRef

47.

E. Ohmura, I. Fukumoto, I. Miyamoto, Molecular dynamics simulationon laser ablation and thermal shock phenomena, in Proceedings of the ICALEO (1998), pp. A45–A54

48.

R. Paschotta, R.P. Photonics, C. Gmbh, Solid state lasers for ultrashort pulses—a diverse family, in Photonick International (2006), pp. 1–4

49.

S. Ronald, Fundamentals of Laser Micromachining (CRC Press, A Taylor & Francis Group, USA, 2012). ISBN 9781439860557

50.

M.N. Watson, Laser drilling of printed circuit boards, in Circuit World, (1984), pp. 11, 13CrossRef

Titel: Laser Micromachining of Engineering Materials—A Review
verfasst von: Nadeem Faisal
Divya Zindani
Kaushik Kumar
Sumit Bhowmik
Verlag: Springer International Publishing
Buch: Micro and Nano Machining of Engineering Materials
Print ISBN: 978-3-319-99899-2

Electronic ISBN: 978-3-319-99900-5

Copyright-Jahr: 2019
DOI: https://doi.org/10.1007/978-3-319-99900-5_6

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht