nach oben

Journal of Material Cycles and Waste Management

Erschienen in:

19.10.2023 | ORIGINAL ARTICLE

Recycling of fine fraction of spent foundry sands into fireclay bricks

verfasst von: Volha Zalyhina, Victoria Cheprasova, Valentin Romanovski

Erschienen in: Journal of Material Cycles and Waste Management | Ausgabe 1/2024

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

The most large-scale foundry waste is burnt molding earth, which is formed at the stage of knocking out castings from foundry molds. The properties of burnt molding earth (humidity, loss on ignition, elemental, phase, and grain composition) were studied and the possibility of its regeneration was confirmed. It is shown that during mechanical regeneration, about 24 wt.% of the considered waste turns into a fine pulverized fraction, which cannot be returned to the technological process and is sent to a landfill. On the basis of experimental studies, it has been established that this fraction of burnt molding earth can be used in the production of ceramic bricks as a lean additive. The obtained samples of ceramic bricks containing 20 wt.% finely dispersed fraction of molding burnt earth at a firing temperature of 1000 °C for 60 min are characterized by the following properties: average density 2020 kg/m³, water absorption 10.8%, compressive strength 39.8 MPa, and ultimate strength in bending 12.67 MPa.

Vorheriger Artikel Recovery limitation due to metal loss to fiberglass particles during printed circuit board leaching and probable mechanisms

Nächster Artikel Sustainable composite cement prepared by two different types of iron slag

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Yefimenko N, Rajabzadeh M, Zaloga V, Fesenko D, Ryasnaya O (2023) A Universal Quality Control System on Machine-Building Enterprises. In: Grabchenko’s International Conference on Advanced Manufacturing Processes (pp. 391–399). Springer, Cham. https://doi.org/10.1007/978-3-031-16651-8_37

Iqbal MF, Liu QF, Azim I, Zhu X, Yang J, Javed MF, Rauf M (2020) Prediction of mechanical properties of green concrete incorporating waste foundry sand based on gene expression programming. J Hazard Mater 384:121322. https://doi.org/10.1016/j.jhazmat.2019.121322CrossRef

Iqbal MF, Liu QF, Azim I (2019) Experimental study on the utilization of waste foundry sand as embankment and structural fill. In: IOP conference series: materials science and engineering (Vol. 474, No. 1, p. 012042). IOP Publishing. https://doi.org/10.1088/1757-899X/474/1/012042

Aftab B, Ok YS, Cho J, Hur J (2019) Targeted removal of organic foulants in landfill leachate in forward osmosis system integrated with biochar/activated carbon treatment. Water Res 160:217–227. https://doi.org/10.1016/j.watres.2019.05.076CrossRef

Mymrin V, Ribas HE, Pedroso DE, Pedroso CL, Klitzke W, Avanci MA, Goncalves AJ, Rolim PH (2022) Physical–chemical processes of sustainable materials’ production from hazardous toner waste, galvanic glass waste and spent foundry sand. J Mater Cycles Waste Manage 25:396–406. https://doi.org/10.1007/s10163-022-01557-9CrossRef

Akinwande AA, Balogun OA, Danso H, Romanovski V, Ademati AO, Oyediran AO (2023) Development of insulating masonry bricks from wood fiber and varying milled glass proportion. J Civil Eng Constr 12(1):40–54. https://doi.org/10.32732/jcec.2023.12.1.40CrossRef

Barnabas AA, Balogun OA, Akinwande AA, Ogbodo JF, Ademati AO, Dongo EI, Romanovski V (2023) Reuse of walnut shell waste in the development of fired ceramic bricks. Environ Sci Pollut Res 30(5):11823–11837. https://doi.org/10.1007/s11356-022-22955-4CrossRef

Abdulwahid MY, Akinwande AA, Kamarou M, Romanovski V, Al-Qasem IA (2023) The production of environmentally friendly building materials out of recycling walnut shell waste: a brief review. Biomass Convers Biorefinery. https://doi.org/10.1007/s13399-023-04760-2CrossRef

Kamarou M, Moskovskikh D, Chan HL, Wang H, Li T, Akinwande AA, Romanovski V (2023) Low energy synthesis of anhydrite cement from waste lime mud. J Chem Technol Biotechnol 98:789–796. https://doi.org/10.1002/JCTB.7284CrossRef

10.

Romanovski V, Klyndyuk A, Kamarou M (2021) Green approach for low-energy direct synthesis of anhydrite from industrial wastes of lime mud and spent sulfuric acid. J Environ Chem Eng 9(6):106711. https://doi.org/10.1016/j.jece.2021.106711CrossRef

11.

Zalyhina V, Cheprasova V, Romanovski V (2022) Paper industry slag for the production of building ceramics. J Chem Technol Biotechnol 97(11):3091–3099. https://doi.org/10.1002/JCTB.7174CrossRef

12.

Romanovski V, Zhang L, Su X, Smorokov A, Kamarou M (2022) Gypsum and high quality binders derived from water treatment sediments and spent sulfuric acid: chemical engineering and environmental aspects. Chem Eng Res Des 184:224–232. https://doi.org/10.1016/j.cherd.2022.06.008CrossRef

13.

Kamarou M, Korob N, Hil A, Moskovskikh D, Romanovski V (2021) Low-energy technology for producing anhydrite in the CaCO₃ – H₂SO₄ – H₂O system derived from industrial wastes. J Chem Technol Biotechnol 96(7):2065–2071. https://doi.org/10.1002/jctb.6740CrossRef

14.

Romanovski V, Su X, Zhang L, Paspelau A, Smorokov A, Sehat AA, Akinwande AA, Korob N, Kamarou M (2023) Approaches for filtrate utilization from synthetic gypsum production. Environ Sci Pollut Res. https://doi.org/10.1007/s11356-022-24584-3CrossRef

15.

Akinwande AA, Folorunso DO, Balogun OA, Romanovski V (2022) Mathematical modelling, multi-objective optimization, and compliance reliability of paper-derived eco-composites. Environ Sci Pollut Res 29(1):70135–70157. https://doi.org/10.1007/s11356-022-20714-zCrossRef

16.

Akinwande AA, Balogun OA, Romanovski V (2022) Modeling, multi-response optimization, and performance reliability of green metal composites produced from municipal wastes. Environ Sci Pollut Res. https://doi.org/10.1007/s11356-022-20023-5CrossRef

17.

Ademati AO, Akinwande AA, Balogun OA, Romanovski V (2022) Optimization of bamboo-fiber-reinforced composite-clay bricks for development of low-cost farm-settlements towards boosting rural agri-business in Africa. J Mater Civ Eng 34(12):04022335. https://doi.org/10.1061/(ASCE)MT.1943-5533.0004489CrossRef

18.

Akinwande AA, Balogun OA, Romanovski V, Danso H, Kamarou M, Ademati AO (2022) Mechanical performance and Taguchi optimization of kenaf fiber/cement-paperboard composite for interior application. Environ Sci Pollut Res 29:52675–52688. https://doi.org/10.1007/s11356-022-19449-8CrossRef

19.

Akinwande AA, Balogun OA, Romanovski V, Ademati AO, Adetula YV (2022) Recycling of synthetic waste wig fiber in the production of cement-adobe for building envelope: physio-hydric properties. Environ Sci Pollut Res 29:34075–34091. https://doi.org/10.1007/s11356-022-18649-6CrossRef

20.

Zalyhina V, Cheprasova V, Romanovski V (2021) Pigments from spent chloride-ammonium zinc plating electrolytes. J Chem Technol Biotechnol 96(10):2767–2774. https://doi.org/10.1002/jctb.6822CrossRef

21.

Zalyhina V, Cheprasova V, Belyaeva V, Romanovski V (2021) Pigments from spent Zn, Ni, Cu, and Cd electrolytes from electroplating industry / Environmental Science and Pollution. Research 28:32660–32668. https://doi.org/10.1007/s11356-021-13007-4CrossRef

22.

Martsul VN, Zalygina OS, Shibeka LA, Likhacheva AV, Ramanouski VI (2012) Some applications of galvanic manufacture waste/Proceedings of BSTU. Chemistry and technology of inorganic substances. Vol. 3, pp 66–70

23.

Martsul VN, Likhacheva AV, Shibeka LA, Zalygina OS, Ramanouski VI, Khodin VV (2012) Inventory of galvanic sludge and deposits of the treatment facilities formed at the enterprises of the Republic of Belarus. In: Proceedings of BSTU. Chemistry and technology of inorganic substances. 3; pp 71–77

24.

Martsul VN, Zalygina OS, Likhacheva AV, Romanovski VI (2013) Treatment of electroplating shop wastewater at enterprises of the Republic of Belarus. In: Proceedings of BSTU. Chemistry and technology of inorganic substances. Vol. 3, pp 57–62

25.

Matsukevich I, Kulinich N, Romanovski V (2022) Direct reduced iron and zinc recovery from electric arc furnace dust. J Chem Technol Biotechnol 97(11):3091–3099. https://doi.org/10.1002/jctb.7205CrossRef

26.

Hurynovich A, Kwietniewski M, Romanovski V (2021) Evaluation of the possibility of utilization of sewage sludge from Wastewater Treatment Plant – case study. Desalin Water Treat 227:16–25. https://doi.org/10.5004/dwt.2021.27199CrossRef

27.

Smorokov A, Kantaev A, Bryankin D, Miklashevich A, Kamarou M, Romanovski V (2023) Low-temperature method for desiliconization of polymetallic slags by ammonium bifluoride solution. Environ Sci Pollut Res 30(5):30271–30280. https://doi.org/10.1007/s11356-022-24230-yCrossRef

28.

Smorokov A, Kantaev A, Bryankin D, Miklashevich A, Kamarou M, Romanovski V (2023) A novel low-energy approach of leucoxene concentrate desiliconization by ammonium bifluoride solutions. J Chem Technol Biotechnol 98(3):726–733. https://doi.org/10.1002/jctb.7277CrossRef

29.

Smorokov A, Kantaev A, Bryankin D, Miklashevich A, Kamarou M, Romanovski V (2022) Low-temperature desiliconization of activated zircon concentrate by NH4HF2 solution. Miner Eng 189:107909. https://doi.org/10.1016/j.mineng.2022.107909CrossRef

30.

Sithole NT, Tsotetsi NT, Mashifana T, Sillanpää M (2022) Alternative cleaner production of sustainable concrete from waste foundry sand and slag. J Clean Prod 336:130399. https://doi.org/10.1016/j.jclepro.2022.130399CrossRef

31.

Priyadarshini M, Giri JP (2022) Use of recycled foundry sand for the development of green concrete and its quantification. J Build Eng 52:104474. https://doi.org/10.1016/j.jobe.2022.104474CrossRef

32.

Cunha S, Costa D, Aguiar JB, Castro F (2023) Mortars with the incorporation of treated ceramic molds shells wastes. Constr Build Mater 365:130074. https://doi.org/10.1016/j.conbuildmat.2022.130074CrossRef

33.

Gautam L, Jain JK, Jain A, Kalla P (2022) Valorization of bone-china ceramic powder waste along with granite waste in self-compacting concrete. Constr Build Mater 315:125730. https://doi.org/10.1016/j.conbuildmat.2021.125730CrossRef

34.

Schwarz M, Salva J, Vanek M, Poništ J, Prepilková V, Lobotková M, Turčániová E (2022) Assessment of possibilities of using waste foundry sand–review. Int J Mater Res 1:1

35.

Cioli F, Abbà A, Alias C, Sorlini S (2022) Reuse or disposal of waste foundry sand: an insight into environmental aspects. Appl Sci 12(13):6420. https://doi.org/10.3390/app12136420CrossRef

36.

Anjum F, Naz MY, Ghaffar A, Kamran K, Shukrullah S, Ullah S (2022) Sustainable insulating porous building materials for energy-saving perspective: stones to environmentally friendly bricks. Constr Build Mater 318:125930. https://doi.org/10.1016/j.conbuildmat.2021.125930CrossRef

37.

Filippenkov AA, Maizel SG, Afonaskin AV, Churkin BS, Hoffman EB, Churkin AB, Kategorenko A, Yu I (Ed.) Milyaev VM (Ed.) (2018). Foundry technology: textbook. (2nd ed., revised and supplemented ed.) Russian State Vocational Pedagogical University. ISBN 978–5–8050–0641–9

38.

Quijorna N, Coz A, Andres A, Cheeseman C (2012) Recycling of Waelz slag and waste foundry sand in red clay bricks. Resour Conserv Recycl 65:1–10. https://doi.org/10.1016/j.resconrec.2012.05.004CrossRef

39.

Alonso-Santurde R, Andrés A, Viguri JR, Raimondo M, Guarini G, Zanelli C, Dondi M (2011) Technological behaviour and recycling potential of spent foundry sands in clay bricks. J Environ Manage 92(3):994–1002. https://doi.org/10.1016/j.jenvman.2010.11.004CrossRef

40.

Alonso-Santurde R, Coz A, Viguri JR, Andrés A (2012) Recycling of foundry by-products in the ceramic industry: green and core sand in clay bricks. Constr Build Mater 27(1):97–106. https://doi.org/10.1016/j.conbuildmat.2011.08.022CrossRef

41.

Hossiney N, Das P, Mohan MK, George J (2018) In-plant production of bricks containing waste foundry sand—a study with Belgaum foundry industry. Case Stud Constr Mater 9:e00170. https://doi.org/10.1016/j.cscm.2018.e00170CrossRef

Titel: Recycling of fine fraction of spent foundry sands into fireclay bricks
verfasst von: Volha Zalyhina
Victoria Cheprasova
Valentin Romanovski
Publikationsdatum: 19.10.2023
Verlag: Springer Japan
Erschienen in: Journal of Material Cycles and Waste Management / Ausgabe 1/2024
Print ISSN: 1438-4957
Elektronische ISSN: 1611-8227
DOI: https://doi.org/10.1007/s10163-023-01825-2

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 1/2024

Blast furnace sludge loaded with phosphate: a potential low-cost fertilizer

Response surface design, modelling and analysis on pyrolysis of waste high-density polyethylene (HDPE)

Research on the process of carbon thermal reduction for recovery and resynthesis of LiNi0.6Co0.2Mn0.2O2

Relationship between the demand for food delivery and takeaway services and the associated plastic packaging waste during the COVID-19 pandemic

Role of knowledge and attitude of public and private school students for plastic pollution awareness, usage, and management in Lahore, Pakistan

Addition of coco coir and rice hull ash improves the quality of seedling substrate based on green waste compost for Cucurbitaceae vegetable seedlings