nach oben

Journal of Polymer Research

Erschienen in:

01.01.2023 | Review paper

Advances towards development of industrially relevant short natural fiber reinforced and hybridized polypropylene composites for various industrial applications: a review

verfasst von: Atul Kumar Maurya, Gaurav Manik

Erschienen in: Journal of Polymer Research | Ausgabe 1/2023

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

There has been an apparent significant increase in the application of composite materials in diverse industrial sectors lately with a focus on improving performance properties and processing techniques. Among several advances noticed, the most significant one for composite industry has been the reinforcement of environment friendly natural fiber (NF) to the polymeric matrix for the fabrication of superior composites. This benign entry of NF in the composite industry has prominently decreased the carbon footprint and composite cost compared to the previously synthetic fiber reinforced ones. Motivated by the decreased cost and latent positive environmental effects, various engineering sectors have already started using these composite materials extensively. The scientific community has observed that hybridization of natural fibers with certain fillers helps to enhance the performance of these composites further. In line with this, the review aims to describe the developments related to the particulate hybridization with short industrially pertinent NF reinforced polypropylene (PP) composites. The effect of hybridization on the composite processability, interfacial interactions, mechanical properties, thermomechanical and thermal properties, and moisture absorption has been covered. The review also covers various challenges and prospects of NF/PP composites for application in the automotive, aerospace and other industries.

Vorheriger Artikel Molecular simulation of structural properties of polymer blend nanofilms

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Mahmud S, Hasan KMF, Jahid MA et al (2021) Comprehensive review on plant fiber-reinforced polymeric biocomposites. J Mater Sci 56:7231–7264. https://doi.org/10.1007/s10853-021-05774-9CrossRef

Hasan KMF, Horváth PG, Alpár T (2020) Potential natural fiber polymeric nanobiocomposites: a review. Polym 12:1072. https://doi.org/10.3390/POLYM12051072CrossRef

Jeyapragash R, Srinivasan V, Sathiyamurthy S (2020) Mechanical properties of natural fiber/particulate reinforced epoxy composites – A review of the literature. Mater Today Proc 22:1223–1227. https://doi.org/10.1016/J.MATPR.2019.12.146CrossRef

Zaini E, Azaman M, Jamali M, Ismail K (2018) Synthesis and characterization of natural fiber reinforced polymer composites as core for honeycomb core structure: a review. 22:525–550. https://doi.org/10.1177/1099636218758589

Pradeep SA, Iyer RK, Kazan H, Pilla S (2017) Automotive applications of plastics: past, present, and future. In: Kutz M (ed) Applied Plastics Engineering Handbook. Elsevier, Second, pp 651–673CrossRef

Mohammed L, Ansari MN, Pua G, Jawaid M, Islam MS (2015) A review on natural fiber reinforced polymer composite and its application. 15

Naveen J, Jawaid M, Amuthakkannan P, Chandrasekar M (2018) Mechanical and physical properties of sisal and hybrid sisal fiber-reinforced polymer composites. In: Jawaid M, Thariq M, Saba N (eds) Mechanical and physical testing of biocomposites, fibre-reinforced composites and hybrid composites. Elsevier, pp 427–440

Nurazzi NM, Asyraf MRM, Khalina A et al (2021) A review on natural fiber reinforced polymer composite for bullet proof and ballistic applications. Polym 13:646. https://doi.org/10.3390/POLYM13040646CrossRef

Piqué R, Romero S, Palomo A et al (2018) The production and use of cordage at the early Neolithic site of La Draga (Banyoles, Spain). Quat Int 468:262–270. https://doi.org/10.1016/J.QUAINT.2016.05.024CrossRef

10.

Goddard JJ, Kallis G, Norgaard RB (2019) Keeping multiple antennae up: Coevolutionary foundations for methodological pluralism. Ecol Econ 165:106420. https://doi.org/10.1016/J.ECOLECON.2019.106420CrossRef

11.

Mehmandost N, Soriano ML, Lucena R et al (2019) Recycled polystyrene-cotton composites, giving a second life to plastic residues for environmental remediation. J Environ Chem Eng 7:103424. https://doi.org/10.1016/J.JECE.2019.103424CrossRef

12.

Maurya AK, Gogoi R, Manik G (2021) Sisal fiber/fly ash reinforced hybrid polypropylene composite: An investigation into the thermal, rheological and crystallographic properties. In: Manik G, Kalia S, Sahoo SK et al (eds) 2nd International Congress on Advances in Mechanical and System Engineering (CAMSE 2021). Springer Singapore, Jalandhar, India

13.

Mansor MR, Nurfaizey AH, Tamaldin N, Nordin MNA (2019) Natural fiber polymer composites: Utilization in aerospace engineering. In: Biomass, Biopolymer-Based Materials, and Bioenergy: Construction, Biomedical, and other Industrial Applications. Woodhead Publishing, pp 203–224

14.

Gholampour A, Ozbakkaloglu T (2019) A review of natural fiber composites: properties, modification and processing techniques, characterization, applications. J Mater Sci 553(55):829–892. https://doi.org/10.1007/S10853-019-03990-YCrossRef

15.

Ashok RB, Srinivasa CV, Basavaraju B (2019) Dynamic mechanical properties of natural fiber composites—a review. Adv Compos Hybrid Mater 24(2):586–607. https://doi.org/10.1007/S42114-019-00121-8CrossRef

16.

Fiore V, Scalici T, Valenza A (2014) Characterization of a new natural fiber from Arundo donax L. as potential reinforcement of polymer composites. Carbohydr Polym 106:77–83. https://doi.org/10.1016/J.CARBPOL.2014.02.016CrossRef

17.

Komuraiah A, Kumar NS, Prasad BD (2017) The study of relationship between fracture angles of natural fiber with its micro fibril angle. Procedia Eng 173:1198–1202. https://doi.org/10.1016/J.PROENG.2016.12.117CrossRef

18.

Lotfi A, Li H, Dao DV, Prusty G (2019) Natural fiber–reinforced composites: A review on material, manufacturing, and machinability. 34:238–284. https://doi.org/10.1177/0892705719844546

19.

Yan L, Kasal B, Huang L (2016) A review of recent research on the use of cellulosic fibres, their fibre fabric reinforced cementitious, geo-polymer and polymer composites in civil engineering. Compos Part B Eng 92:94–132. https://doi.org/10.1016/J.COMPOSITESB.2016.02.002CrossRef

20.

Faruk O, Bledzki AK, Fink HP, Sain M (2012) Biocomposites reinforced with natural fibers: 2000–2010. Prog Polym Sci 37:1552–1596. https://doi.org/10.1016/J.PROGPOLYMSCI.2012.04.003CrossRef

21.

Ramesh M, Palanikumar K, Reddy KH (2017) Plant fibre based bio-composites: Sustainable and renewable green materials. Renew Sustain Energy Rev 79:558–584. https://doi.org/10.1016/J.RSER.2017.05.094CrossRef

22.

Mohanty AK, Misra M, Hinrichsen G (2000) Biofibres, biodegradable polymers and biocomposites: an overview. Macromol Mater Eng 277:1–24. https://doi.org/10.1002/(SICI)1439-2054(20000301)276:1CrossRef

23.

Polypropylene in the Automotive Industry - Extruders of plastic sheet and film. http://www.euroextrusions.com/polypropylene-automotive-industry/. Accessed 27 Sept 2018

24.

Patil A, Patel A, Purohit R (2017) An overview of Polymeric Materials for Automotive Applications. In: Materials Today: Proceedings. Elsevier, pp 3807–3815

25.

Markarian J (2007) Long fibre reinforced thermoplastics continue growth in automotive. Plast Addit Compd 9:20–24. https://doi.org/10.1016/S1464-391X(07)70025-9CrossRef

26.

Jansz J (1999) Polypropylene in automotive applications. 643–651. https://doi.org/10.1007/978-94-011-4421-6_87

27.

Kausar A (2017) Polyurethane composite foams in high-performance applications: a review. 57:346–369. https://doi.org/10.1080/03602559.2017.1329433

28.

Akindoyo JO, Beg MDH, Ghazali S et al (2016) Polyurethane types, synthesis and applications – a review. RSC Adv 6:114453–114482. https://doi.org/10.1039/C6RA14525FCrossRef

29.

Hanafi M, Sah M, Mohd A et al (2017) Mechanical properties of coconut shell powder reinforced PVC composites in automotive applications. J Mech Eng 14:49–61

30.

McKeen LW (2010) Styrenic Plastics. In: McKeen LW (ed) Fatigue and tribological properties of plastics and elastomers. Elsevier Inc., Second Edi, pp 51–71CrossRef

31.

Pious CV, Thomas S (2016) Polymeric materials—structure, properties, and applications. Print Polym Fundam Appl. https://doi.org/10.1016/B978-0-323-37468-2.00002-6CrossRef

32.

Acrylonitrile-butadiene-styrene (ABS) Uses and Market Data | ICIS. https://www.icis.com/explore/resources/news/2007/10/18/9071051/acrylonitrile-butadiene-styrene-abs-uses-and-market-data/. Accessed 2 Aug 2021

33.

Seubert C, Nietering K, Nichols M et al (2012) An overview of the scratch resistance of automotive coatings: exterior clearcoats and polycarbonate hardcoats. Coatings 2:221–234. https://doi.org/10.3390/COATINGS2040221CrossRef

34.

Anthony BT (1985) Lexan polycarbonate for automotive forward lighting. Mater Des 6:293–302. https://doi.org/10.1016/0261-3069(85)90011-1CrossRef

35.

Birch A, Dal Castel C, Kiziltas A, Mielewski D, Simon L. Development of cost effective and sustainable polyamide blends for automotive applications. In SPE Automotive Composites Conference & Exhibition 2015 (pp. 1-10)

36.

Shinde NG, Dilip D, Patel M A short review on automobile dashboard materials. https://doi.org/10.1088/1757-899X/810/1/012033

37.

Begum SA, Rane AV, Kanny K (2020) Applications of compatibilized polymer blends in automobile industry. Compat Polym Blends Micro Nano Scale Phase Morphol Interphase Charact Prop. https://doi.org/10.1016/B978-0-12-816006-0.00020-7CrossRef

38.

Chirayil CJ, Joy J, Maria HJ et al (2016) Polyolefins in automotive industry. 265–283. https://doi.org/10.1007/978-3-319-25982-6_11

39.

Atakan R, Sezer S, Karakas H (2018) Development of nonwoven automotive carpets made of recycled PET fibers with improved abrasion resistance. J Ind Text 49:835–857. https://doi.org/10.1177/1528083718798637CrossRef

40.

Sales JCS, de Castro AM, Ribeiro BD, Coelho MAZ (2022) Post-Consumer Poly(ethylene terephthalate) (PET) Depolymerization by Yarrowia lipolytica: A Comparison between Hydrolysis Using Cell-Free Enzymatic Extracts and Microbial Submerged Cultivation. Molecules 27(21):7502. https://doi.org/10.3390/molecules27217502

41.

Maurya AK, Gogoi R, Manik G (2021) Study of the moisture mitigation and toughening effect of fly-ash particles on sisal fiber-reinforced hybrid polypropylene composites. J Polym Environ 297(29):2321–2336. https://doi.org/10.1007/S10924-021-02043-3CrossRef

42.

Maurya AK, Gogoi R, Manik G (2021) Mechano-chemically activated fly-ash and sisal fiber reinforced PP hybrid composite with enhanced mechanical properties. Cellulose. https://doi.org/10.1007/s10570-021-03995-4CrossRef

43.

Koohestani B, Darban AK, Mokhtari P et al (2019) Comparison of different natural fiber treatments: a literature review. Int J Environ Sci Technol 16:629–642. https://doi.org/10.1007/s13762-018-1890-9CrossRef

44.

Pickering KL, Efendy MGA, Le TM (2016) A review of recent developments in natural fibre composites and their mechanical performance. Compos Part A Appl Sci Manuf 83:98–112. https://doi.org/10.1016/J.COMPOSITESA.2015.08.038CrossRef

45.

Biagiotti J, Puglia D, Kenny JM (2008) A review on natural fibre-based composites-part I. 1:37–68. https://doi.org/10.1300/J395V01N02_04

46.

Koohestani B (2017) Effect of saline admixtures on mechanical and microstructural properties of cementitious matrices containing tailings. Constr Build Mater 156:1019–1027. https://doi.org/10.1016/J.CONBUILDMAT.2017.09.048CrossRef

47.

Kabir MM, Wang H, Lau KT, Cardona F (2012) Chemical treatments on plant-based natural fibre reinforced polymer composites: An overview. Compos Part B Eng 43:2883–2892. https://doi.org/10.1016/J.COMPOSITESB.2012.04.053CrossRef

48.

El-Abbassi FE, Assarar M, Ayad R, Lamdouar N (2015) Effect of alkali treatment on Alfa fibre as reinforcement for polypropylene based eco-composites: Mechanical behaviour and water ageing. Compos Struct 133:451–457. https://doi.org/10.1016/J.COMPSTRUCT.2015.07.112CrossRef

49.

Homan W, Heron AJ (2004) Wood modification developments. Heron 49

50.

Väisänen T, Haapala A, Lappalainen R, Tomppo L (2016) Utilization of agricultural and forest industry waste and residues in natural fiber-polymer composites: a review. Waste Manag 54:62–73. https://doi.org/10.1016/J.WASMAN.2016.04.037CrossRef

51.

Lu JZ, Professor A, McNabb HS, Professor J (2000) Chemical coupling in wood fiber and polymer composites: a review of coupling agents and treatments. Wood Fiber Sci 88–104

52.

George J, Sreekala MS, Thomas S (2001) A review on interface modification and characterization of natural fiber reinforced plastic composites. Polym Eng Sci 41:1471–1485. https://doi.org/10.1002/PEN.10846CrossRef

53.

Gogoi R, Kumar N, Mireja S et al (2019) Effect of hollow glass microspheres on the morphology, rheology and crystallinity of short bamboo fiber-reinforced hybrid polypropylene composite. JOM 71:548–558. https://doi.org/10.1007/s11837-018-3268-3CrossRef

54.

Kumar J, Maurya AK, Gupta HS et al (2022) Development of eco-friendly bio-composite by reinforcing pineapple fruit waste crown fiber to ethylene-propylene rubber modified polyethylene. Polym Compos 43:8259–8273. https://doi.org/10.1002/PC.26997CrossRef

55.

Mihalic M, Sobczak L, Pretschuh C, Unterweger C (2019) Increasing the impact toughness of cellulose fiber reinforced polypropylene composites—influence of different impact modifiers and production scales. J Compos Sci 3:82. https://doi.org/10.3390/JCS3030082CrossRef

56.

Sain M, Suhara P, Law S, Bouilloux A (2005) Interface modification and mechanical properties of natural fiber-polyolefin composite products. J Reinf Plast Compos 24:121–130. https://doi.org/10.1177/0731684405041717CrossRef

57.

Sarikaya E, Çallioğlu H, Demirel H (2019) Production of epoxy composites reinforced by different natural fibers and their mechanical properties. Compos Part B Eng 167:461–466. https://doi.org/10.1016/J.COMPOSITESB.2019.03.020CrossRef

58.

Panaitescu DM, Vuluga Z, Sanporean CG et al (2019) High flow polypropylene/SEBS composites reinforced with differently treated hemp fibers for injection molded parts. Compos Part B Eng 174:107062. https://doi.org/10.1016/J.COMPOSITESB.2019.107062CrossRef

59.

Mochane M, Mokhena T, Mokhothu T et al (2019) Recent progress on natural fiber hybrid composites for advanced applications: A review. Express Polym Lett 13:159–198. https://doi.org/10.3144/expresspolymlett.2019.15CrossRef

60.

Asumani OML, Reid RG, Paskaramoorthy R (2012) The effects of alkali–silane treatment on the tensile and flexural properties of short fibre non-woven kenaf reinforced polypropylene composites. Compos Part A Appl Sci Manuf 43:1431–1440. https://doi.org/10.1016/J.COMPOSITESA.2012.04.007CrossRef

61.

Puch F, Hopmann C (2015) Experimental investigation of the influence of the compounding process and the composite composition on the mechanical properties of a short flax fiber–reinforced polypropylene composite. Polym Compos 36:2282–2290. https://doi.org/10.1002/PC.23141CrossRef

62.

Sullins T, Pillay S, Komus A, Ning H (2017) Hemp fiber reinforced polypropylene composites: The effects of material treatments. Compos Part B Eng 114:15–22. https://doi.org/10.1016/J.COMPOSITESB.2017.02.001CrossRef

63.

Feng Y, Hu Y, Zhao G et al (2011) Preparation and mechanical properties of high-performance short ramie fiber-reinforced polypropylene composites. J Appl Polym Sci 122:1564–1571. https://doi.org/10.1002/APP.34281CrossRef

64.

Rana AK, Mandal A, Bandyopadhyay S (2003) Short jute fiber reinforced polypropylene composites: effect of compatibiliser, impact modifier and fiber loading. Compos Sci Technol 63:801–806. https://doi.org/10.1016/S0266-3538(02)00267-1CrossRef

65.

Sanjay MR, Arpitha GR, Yogesha B (2015) Study on mechanical properties of natural - glass fibre reinforced polymer hybrid composites: a review. Mater Today Proc 2:2959–2967. https://doi.org/10.1016/J.MATPR.2015.07.264CrossRef

66.

Pradeep SA, Iyer RK, Kazan H, Pilla S (2017) automotive applications of plastics: past, present, and future. Appl Plast Eng Handb Process Mater Appl Second Ed. https://doi.org/10.1016/B978-0-323-39040-8.00031-6CrossRef

67.

Fawaz J, Vikas M (2014) In: Mittal V (ed) Polymer nanotube nanocomposites: a review of synthesis methods, properties and applications. Polymer Nanotubes Nanocomposites: Synthesis, Properties and Applications, p 1–44

68.

Zhao D, Zhou Z (2014) Applications of lightweight composites in automotive industries.https://doi.org/10.1021/bk-2014-1175.ch009

69.

Joshi SV, Drzal LT, Mohanty AK, Arora S (2004) Are natural fiber composites environmentally superior to glass fiber reinforced composites? Compos Part A Appl Sci Manuf 35:371–376. https://doi.org/10.1016/J.COMPOSITESA.2003.09.016CrossRef

70.

Adesina OT, Jamiru T, Sadiku ER, Ogunbiyi OF, Beneke LW (2019) Mechanical evaluation of hybrid natural fibre–reinforced polymeric composites for automotive bumper beam: a review. Int J Adv Manuf Technol. 103(5):1781–1797CrossRef

71.

Boland CS, De KR, Keoleian GA et al (2016) Life cycle impacts of natural fiber composites for automotive applications: effects of renewable energy content and lightweighting. J Ind Ecol 20:179–189. https://doi.org/10.1111/JIEC.12286CrossRef

72.

Mohanty AK, Misra M, Drzal LT (2005) Natural fibers, biopolymers, and biocomposites. CRC PressCrossRef

73.

Yahaya R, Sapuan SM, Jawaid M et al (2016) (2016) Investigating ballistic impact properties of woven kenaf-aramid hybrid composites. Fibers Polym 172(17):275–281. https://doi.org/10.1007/S12221-016-5678-6CrossRef

74.

da Luz FS, Garcia Filho FDC, Oliveira MS et al (2020) Composites with natural fibers and conventional materials applied in a hard armor: a comparison. Polym 12:1920. https://doi.org/10.3390/POLYM12091920CrossRef

75.

Yahaya R, Sapuan SM, Jawaid M et al (2014) Quasi-static penetration and ballistic properties of kenaf–aramid hybrid composites. Mater Des 63:775–782. https://doi.org/10.1016/J.MATDES.2014.07.010CrossRef

76.

Anidha S, Latha N, Muthukkumar M (2020) Effect of polyaramid reinforced with sisal epoxy composites: Tensile, impact, flexural and morphological properties. J Mater Res Technol 9:7947–7954. https://doi.org/10.1016/J.JMRT.2020.04.081CrossRef

77.

Jambari S, Yahya Y, Abdullah MR, Jawaid M (2017) Woven Kenaf/Kevlar Hybrid Yarn as potential fiber reinforced for anti-ballistic composite material. Fibers Polym 18:563–568. https://doi.org/10.1007/s12221-017-6950-0CrossRef

78.

Salman SD, Leman Z, Sultan MT, Ishak MR, Cardona F (2016) Ballistic impact resistance of plain woven kenaf/aramid reinforced polyvinyl butyral laminated hybrid composite. BioResources 11(3):7282–7295

79.

Elseify LA, Midani M, El-Badawy A, Jawaid M (2021) Manufacturing automotive components from sustainable natural fiber composites. Springer International Publishing, ChamCrossRef

80.

Boegler O, Kling U, Empl D, Isikveren AT (2015) Potential of sustainable materials in wing structural design (pp. 16-18). Bonn, Germany: Deutsche Gesellschaft für Luft-und Raumfahrt-Lilienthal-Oberth eV.

81.

Kling U, Empl D, Boegler O, Isikveren AT (2015) Future aircraft wing structures using renewable materials. Proc Dtsch Luft- und Raumfahrtkongress 8785:370118

82.

Black S (2015) Looking to lighten up aircraft interiors? Try natural fibers! | CompositesWorld

83.

De F, Eloy S, Rony R et al (2015) Comparison between mechanical properties of bio and synthetic composites for use in aircraft interior structures. In: Meeting on Aeronautical Composite Materials and Structures – MACMS 2015

84.

Bhatnagar A, Sain M (2016) Processing of cellulose nanofiber-reinforced composites. 24:1259–1268. https://doi.org/10.1177/0731684405049864

85.

Walsh J, Kim HI, Suhr J (2017) Low velocity impact resistance and energy absorption of environmentally friendly expanded cork core-carbon fiber sandwich composites. Compos Part A Appl Sci Manuf 101:290–296. https://doi.org/10.1016/J.COMPOSITESA.2017.05.026CrossRef

86.

Manan NH, Majid DL, Romli FI (2016) Mould design and manufacturing considerations of honeycomb biocomposites with transverse fibre direction for aerospace application. IOP Conf Ser Mater Sci Eng 152:012013. https://doi.org/10.1088/1757-899X/152/1/012013CrossRef

87.

Chok EYL, Majid DLAA, Harmin MY (2017) Effect of low velocity impact damage on the natural frequency of composite plates. In: IOP Conference Series: Materials Science and Engineering. IOP Publishing, p 012025

88.

Haris MY, Laila D, Zainudin ES et al (2011) Preliminary review of biocomposites materials for aircraft radome application. Key Eng Mater 471–472:563–567. https://doi.org/10.4028/WWW.SCIENTIFIC.NET/KEM.471-472.563CrossRef

89.

Ghori SW, Siakeng R, Rasheed M et al (2018) The role of advanced polymer materials in aerospace. In: Sustainable Composites for Aerospace Applications. Woodhead Publishing, pp 19–34

90.

Muhammad A, Rahman MR, Baini R, Bin Bakri MK (2021) Applications of sustainable polymer composites in automobile and aerospace industry. In: Advances in Sustainable Polymer Composites. LTD, pp 185–207

91.

Rowell RM (2008) Natural fibres: types and properties. In: Properties and Performance of Natural-Fibre Composites. Woodhead Publishing, pp 3–66

92.

Haameem M, Abdul Majid MS, Afendi M et al (2016) Effects of water absorption on Napier grass fibre/polyester composites. Compos Struct 144:138–146. https://doi.org/10.1016/J.COMPSTRUCT.2016.02.067CrossRef

93.

Dhakal HN, Zhang ZY, Richardson MOW (2007) Effect of water absorption on the mechanical properties of hemp fibre reinforced unsaturated polyester composites. Compos Sci Technol 67:1674–1683. https://doi.org/10.1016/J.COMPSCITECH.2006.06.019CrossRef

94.

Mokhothu TH, John MJ (2017) Bio-based coatings for reducing water sorption in natural fibre reinforced composites. Sci Rep 71(7):1–8. https://doi.org/10.1038/s41598-017-13859-2CrossRef

95.

Munirah Abdullah N, Ahmad I (2012) Effect of chemical treatment on mechanical and water-sorption properties coconut fiber-unsaturated polyester from recycled PET. ISRN Mater Sci 2012:1–8. https://doi.org/10.5402/2012/134683CrossRef

96.

Wu J, Yu D, Chan C-M et al (2000) Effect of fiber pretreatment condition on the interfacial strength and mechanical properties of wood Fiber/PP composites. Appl Polym Sci 76:1000–1010. https://doi.org/10.1002/(SICI)1097-4628(20000516)76:7CrossRef

97.

Agrawal R, Saxena NS, Sharma KB et al (2000) Activation energy and crystallization kinetics of untreated and treated oil palm fibre reinforced phenol formaldehyde composites. Mater Sci Eng A 277:77–82. https://doi.org/10.1016/S0921-5093(99)00556-0CrossRef

98.

Wu Y, Xia C, Cai L et al (2018) Water-resistant hemp fiber-reinforced composites: In-situ surface protection by polyethylene film. Ind Crops Prod 112:210–216. https://doi.org/10.1016/J.INDCROP.2017.12.014CrossRef

99.

Mrad H, Alix S, Migneault S et al (2018) Numerical and experimental assessment of water absorption of wood-polymer composites. Measurement 115:197–203. https://doi.org/10.1016/J.MEASUREMENT.2017.10.011CrossRef

100.

Panthapulakkal S, Sain M (2016) Studies on the water absorption properties of short hemp—glass fiber hybrid polypropylene composites. 41:1871–1883. https://doi.org/10.1177/0021998307069900

101.

Akil HM, Cheng LW, Mohd Ishak ZA et al (2009) Water absorption study on pultruded jute fibre reinforced unsaturated polyester composites. Compos Sci Technol 69:1942–1948. https://doi.org/10.1016/J.COMPSCITECH.2009.04.014CrossRef

102.

Alamri H, Low IM (2012) Effect of water absorption on the mechanical properties of n-SiC filled recycled cellulose fibre reinforced epoxy eco-nanocomposites. Polym Test 31:810–818. https://doi.org/10.1016/J.POLYMERTESTING.2012.06.001CrossRef

103.

Selmi A (2014) Void effect on carbon fiber epoxy composites. In 2nd International conference on emerging trends in engineering and technology, ICETET2014 (pp 179-183)

104.

Mehdikhani M, Gorbatikh L, Verpoest I, Lomov SV (2018) Voids in fiber-reinforced polymer composites: a review on their formation, characteristics, and effects on mechanical performance. 53:1579–1669. https://doi.org/10.1177/0021998318772152

105.

Ismail A, Jawaid M, Naveen J (2019) Void content, tensile, vibration and acoustic properties of kenaf/bamboo fiber reinforced epoxy hybrid composites. Materials. https://doi.org/10.3390/ma12132094CrossRef

106.

Calabrese L, Fiore V, Scalici T, Valenza A (2018) Experimental assessment of the improved properties during aging of flax/glass hybrid composite laminates for marine applications. J Appl Polym Sci. https://doi.org/10.1002/app.47203CrossRef

107.

Ramlee NA, Jawaid M, Zainudin ES, Yamani SAK (2019) Tensile, physical and morphological properties of oil palm empty fruit bunch/sugarcane bagasse fibre reinforced phenolic hybrid composites. J Mater Res Technol 8:3466–3474. https://doi.org/10.1016/J.JMRT.2019.06.016CrossRef

108.

Bucknall CB (1977) Impact strength. Toughened Plast 272–304.https://doi.org/10.1007/978-94-017-5349-4_10

109.

Sain M, Suhara P, Law S, Bouilloux A (2016) Interface modification and mechanical properties of natural fiber-polyolefin composite products. J Reinf Plast Compos 24:121–130. https://doi.org/10.1177/0731684405041717CrossRef

110.

Dubnikova IL, Berezina SM, Antonov AV (2004) Effect of rigid particle size on the toughness of filled polypropylene. J Appl Polym Sci 94:1917–1926. https://doi.org/10.1002/APP.21017CrossRef

111.

Malkapuram R, Kumar V, Negi YS (2008) Recent development in natural fiber reinforced polypropylene composites. 28:1169–1189. https://doi.org/10.1177/0731684407087759

112.

Ruksakulpiwat Y, Suppakarn N, Sutapun W, Thomthong W (2007) Vetiver–polypropylene composites: physical and mechanical properties. Compos Part A Appl Sci Manuf 38:590–601. https://doi.org/10.1016/J.COMPOSITESA.2006.02.006CrossRef

113.

Zinge C, Kandasubramanian B (2020) Nanocellulose based biodegradable polymers. Eur Polym J 133:109758. https://doi.org/10.1016/J.EURPOLYMJ.2020.109758CrossRef

114.

Tessema A, Zhao D, Moll J et al (2017) Effect of filler loading, geometry, dispersion and temperature on thermal conductivity of polymer nanocomposites. Polym Test 57:101–106. https://doi.org/10.1016/J.POLYMERTESTING.2016.11.015CrossRef

115.

Zhang W (2014) Nanoparticle aggregation: principles and modeling. Adv Exp Med Biol 811:19–43. https://doi.org/10.1007/978-94-017-8739-0_2CrossRef

116.

Nichols G, Byard S, Bloxham MJ et al (2002) A review of the terms agglomerate and aggregate with a recommendation for nomenclature used in powder and particle characterization. J Pharm Sci 91:2103–2109. https://doi.org/10.1002/JPS.10191CrossRef

117.

Vatansever E, Arslan D, Nofar M (2019) Polylactide cellulose-based nanocomposites. Int J Biol Macromol 137:912–938. https://doi.org/10.1016/J.IJBIOMAC.2019.06.205CrossRef

118.

Yue L, Maiorana A, Khelifa F et al (2018) Surface-modified cellulose nanocrystals for biobased epoxy nanocomposites. Polymer (Guildf) 134:155–162. https://doi.org/10.1016/J.POLYMER.2017.11.051CrossRef

119.

Dundu M, Gao X (2014) Construction Materials and Structures: Proceedings of the First International Conference on Construction Materials and Structures

120.

Singh H, Singh T (2019) Effect of fillers of various sizes on mechanical characterization of natural fiber polymer hybrid composites: a review. Mater Today Proc 18:5345–5350. https://doi.org/10.1016/J.MATPR.2019.07.560CrossRef

121.

Agarwal J, Mohanty S, Nayak SK (2021) Influence of cellulose nanocrystal/sisal fiber on the mechanical, thermal, and morphological performance of polypropylene hybrid composites. Polym Bull 78:1609–1635. https://doi.org/10.1007/S00289-020-03178-4/TABLES/2CrossRef

122.

Krishnaiah P, Manickam S, Ratnam CT et al (2020) Surface-treated short sisal fibers and halloysite nanotubes for synergistically enhanced performance of polypropylene hybrid composites. https://doi.org/10.1177/0892705720946063

123.

Essabir H, Bensalah MO, Rodrigue D et al (2016) Structural, mechanical and thermal properties of bio-based hybrid composites from waste coir residues: fibers and shell particles. Mech Mater 93:134–144. https://doi.org/10.1016/J.MECHMAT.2015.10.018CrossRef

124.

Arrakhiz FZ, Benmoussa K, Bouhfid R, Qaiss A (2013) Pine cone fiber/clay hybrid composite: Mechanical and thermal properties. Mater Des 50:376–381. https://doi.org/10.1016/J.MATDES.2013.03.033CrossRef

125.

Oladele IO, Ibrahim IO, Akinwekomi AD, Talabi SI (2019) Effect of mercerization on the mechanical and thermal response of hybrid bagasse fiber/CaCO3 reinforced polypropylene composites. Polym Test 76:192–198. https://doi.org/10.1016/J.POLYMERTESTING.2019.03.021CrossRef

126.

Upadhyaya P, Garg M, Kumar V, Nema AK (2012) The effect of water absorption on mechanical properties of wood flour/wheat husk polypropylene hybrid composites. Mater Sci Appl 2012:317–325. https://doi.org/10.4236/MSA.2012.35047CrossRef

127.

Najafi A, Kord B, Abdi A, Ranaee S (2011) The impact of the nature of nanoclay on physical and mechanical properties of polypropylene/reed flour nanocomposites. 25:717–727. https://doi.org/10.1177/0892705711412813

128.

Mirbagheri J, Tajvidi M, Hermanson JC, Ghasemi I (2007) Tensile properties of wood flour/kenaf fiber polypropylene hybrid composites. J Appl Polym Sci 105:3054–3059. https://doi.org/10.1002/APP.26363CrossRef

129.

Idumah CI, Hassan A (2016) Characterization and preparation of conductive exfoliated graphene nanoplatelets kenaf fibre hybrid polypropylene composites. Synth Met 212:91–104. https://doi.org/10.1016/J.SYNTHMET.2015.12.011CrossRef

130.

Mohd HA, Abu Bakar MB, Masri MN et al (2020) Mechanical and thermal properties of hybrid non-woven kenaf fibre mat-graphene nanoplatelets reinforced polypropylene composites. Mater Sci Forum 1010:124–129. https://doi.org/10.4028/WWW.SCIENTIFIC.NET/MSF.1010.124CrossRef

131.

Lee CH, Sapuan SM, Hassan MR (2017) Mechanical and thermal properties of kenaf fiber reinforced polypropylene/magnesium hydroxide composites. 12:50–58. https://doi.org/10.1177/155892501701200206

132.

Boujmal R, Kakou CA, Nekhlaoui S et al (2017) Alfa fibers/clay hybrid composites based on polypropylene: mechanical, thermal, and structural properties. 31:974–991. https://doi.org/10.1177/0892705717729197

133.

Venkateswara Rao T, Somaiah Chowdary M, Siva Sanakara Babu C, Mohan Sumanth C (2019) Effect of bamboo fiber on mechanical properties of fly ash with polypropylene composites. Lect Notes Mech Eng. https://doi.org/10.1007/978-981-13-1780-4_42CrossRef

134.

Islam M, Sharif A, Hussain M, Hassan I (2019) Synergic effect of recycled cotton fabric and wood saw dust reinforced biodegradable polypropylene composites. Bangladesh J Sci Ind Res 54:21–30. https://doi.org/10.3329/BJSIR.V54I1.40727CrossRef

135.

Saba N, Tahir PM, Jawaid M (2014) A review on potentiality of nano filler/natural fiber filled polymer hybrid composites. Polym 6:2247–2273. https://doi.org/10.3390/POLYM6082247CrossRef

136.

Extruder Processing Zone (EPZ) is the heart of a Co-rotating Twin-Screw Extruder. http://atozplastics.com/upload/literature/Extruder-Processing-Zone-EPZ-Co-rotating-Twin-Screw-Extruder-quality-compounded-material-output.asp. Accessed 7 Mar 2022

137.

Araújo JR, Waldman WR, De Paoli MA (2008) Thermal properties of high density polyethylene composites with natural fibres: coupling agent effect. Polym Degrad Stab 93:1770–1775. https://doi.org/10.1016/J.POLYMDEGRADSTAB.2008.07.021CrossRef

138.

Essabir H, Raji M, Bouhfid R, Qaiss AEK (2016) Nanoclay and natural fibers based hybrid composites: mechanical morphological, thermal and rheological properties. https://doi.org/10.1007/978-981-10-0950-1_2

139.

Maurya AK, Gogoi R, Sethi SK, Manik G (2021) A combined theoretical and experimental investigation of the valorization of mechanical and thermal properties of the fly ash-reinforced polypropylene hybrid composites. J Mater Sci. https://doi.org/10.1007/S10853-021-06383-2CrossRef

140.

L Lv L, Ding X, Gu H, Hu G (2015) The effect of SEBS and POE on properties of polypropylene. 2:188–194

141.

Vigneshwaran S, Sundarakannan R, John KM et al (2020) Recent advancement in the natural fiber polymer composites: A comprehensive review. J Clean Prod 277:124109. https://doi.org/10.1016/J.JCLEPRO.2020.124109CrossRef

142.

Maurya AK, Gogoi R, Manik G (2022) Thermal behavior of elastomer blends and composites. 149–169. https://doi.org/10.1016/B978-0-323-85832-8.00008-0

143.

Veerasimman A, Shanmugam V, Rajendran S et al (2021) Thermal properties of natural fiber sisal based hybrid composites–a brief review. J Nat Fibers. https://doi.org/10.1080/15440478.2020.1870619CrossRef

144.

Sui G, Fuqua MA, Ulven CA, Zhong WH (2009) A plant fiber reinforced polymer composite prepared by a twin-screw extruder. Bioresour Technol 100:1246–1251. https://doi.org/10.1016/J.BIORTECH.2008.03.065CrossRef

145.

Maurya AK, Gogoi R, Manik G (2022) Recycling and reinforcement potential for the fly ash and sisal fiber reinforced hybrid polypropylene composite. Polym Compos 43:1060–1077. https://doi.org/10.1002/PC.26434CrossRef

Titel: Advances towards development of industrially relevant short natural fiber reinforced and hybridized polypropylene composites for various industrial applications: a review
verfasst von: Atul Kumar Maurya
Gaurav Manik
Publikationsdatum: 01.01.2023
Verlag: Springer Netherlands
Erschienen in: Journal of Polymer Research / Ausgabe 1/2023
Print ISSN: 1022-9760
Elektronische ISSN: 1572-8935
DOI: https://doi.org/10.1007/s10965-022-03413-8

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 1/2023

Facile fabrication of F-POSS star polymer coated superhydrophobic cotton fabric by successive metal-free PET-RAFT and thiol–ene click chemistry for efficient oil/water separation

Polyurethane/MoS2 composites: gas barrier, hygrothermal aging and recycling

Fire behavior and transparent properties of polyvinyl chloride film with different plasticized systems

Superior fatigue and mechanical properties of ethylene-propylene diene monomer rubber incorporated with Zr-based metal–organic framework

Investigation of thermo-oxidative aging of silicone-based adhesives: substantiating separability between environmental and mechanical damages

Highly efficient phosphorous-containing flame retardant for transparent epoxy resin with good mechanical properties

Premium Partner

Marktübersichten