nach oben

Journal of Polymer Research

Erschienen in:

01.11.2023 | Original Paper

Preparation and characterization of polysilazane-based thermal protective coating for CFRP

verfasst von: Zhaoyang Fan, Chao Xiong, Junhui Yin, Youchun Zou, Xiujie Zhu

Erschienen in: Journal of Polymer Research | Ausgabe 11/2023

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

As an excellent ceramic precursor, polysilazane could be cured at low temperatures, which provided a possibility for the preparation of thermal protective coatings for carbon fibers reinforced polymer (CFRP) composites. Hollow glass microspheres with low thermal conductivity were introduced into coatings. Meanwhile, the thermal protection effect of coatings was further enhanced. The dispersion and stability of hollow glass microspheres in polysilazane resin were improved by alkali treatment and grafting coupling agent. Results showed that the stability could be maintained within 2 h, which was feasible in engineering applications. Static thermal tests and hygrothermal aging tests were designed to evaluate the thermal insulation effect of the coating. After 10 min of heat assessment in air atmosphere, the three-point bending performance of coated samples was better than that of uncoated samples. The protection effect was more obvious when the test temperature was higher than the glass transition temperature of carbon fibers reinforced epoxy composites. The bending strength of the coated sample at 270 °C was 743.9 ± 11.9 MPa, which was higher than that of the uncoated sample at 210 °C (743.4 ± 22.3 MPa). According to the result of 5 cycles hygrothermal aging test, the negative effect of acid environments was greater than that of alkali or water. Dynamic thermomechanical analyzer results showed that the coating effectively prevented the damage of water, alkali, or acid environments on the epoxy resin. The above results indicated that the existence of polysilazane and hollow glass microsphere coating systems could further expand the high-temperature application of CFRP.

Vorheriger Artikel Fumarate metal organic frameworks as reactive and curing reaction alternant in hydrophobic bispropargyl ether based matrix resin system

Nächster Artikel Development of cornstarch-based shear thickening fluid and characterization of the effects of the addition of halloysite nanotubes-silica hybrid reinforcements

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Zheng H, Zhang W, Li B, Zhu J, Wang C, Song G, Wu G, Yang X, Huang Y, Ma L (2022) Recent advances of interphases in carbon fiber-reinforced polymer composites: A review. Compos B 233:109639. https://doi.org/10.1016/j.compositesb.2022.109639CrossRef

Liu L, Jia C, He J, Zhao F, Fan D, Xing L, Wang M, Wang F, Jiang Z, Huang Y (2015) Interfacial characterization, control and modification of carbon fiber-reinforced polymer composites. Compos Sci Technol 121:56–72. https://doi.org/10.1016/j.compscitech.2015.08.002CrossRef

Wang W, Sun L, Lu Y, Qi L, Wang W, Qiao H (2022) Laser induced breakdown spectroscopy online monitoring of laser cleaning quality on carbon fiber reinforced plastic. Opt Laser Technol 145:107481. https://doi.org/10.1016/j.optlastec.2021.107481CrossRef

Bora MO, Çoban O, Sinmazcelik T, Gunay V (2010) Effect of fiber orientation on scratch resistance in unidirectional carbon-fiber-reinforced polymer matrix composites. J Reinf Plast Compos 29(10):1476–1490. https://doi.org/10.1177/0731684409103953CrossRef

Han Q, Sheng Y, Liu X, Zhang X, Chen X, Li B, Han Z (2022) Carbon fiber reinforced epoxy composite combining superior electrochemical energy storage and mechanical performance. Chem Eng J 437(2):135228. https://doi.org/10.1016/j.cej.2022.135228CrossRef

Lemartinel A, Castro M, Fouché O, Luca JD, Feller J (2021) Strain mapping and damage tracking in carbon fiber reinforced epoxy composites during dynamic bending until fracture with quantum resistive sensors in array. J Compos Sci 5:60. https://doi.org/10.3390/jcs5020060CrossRef

Zheng X, Huang P, Chen G, Tan XM (2015) Fatigue behavior of FRP–concrete bond under hygrothermal environment. Constr Build Mater 95:898–909. https://doi.org/10.1016/j.conbuildmat.2015.07.172CrossRef

Wang Z, Zhao XL, Xian G, Wu G, Singh Raman RK, Al-Saadi S (2017) Durability study on interlaminar shear behavior of basalt-, glass- and carbon fiber reinforced polymer (B/G/CFRP) bars in seawater sea sand concrete environment. Constr Build Mater 156:985–1004. https://doi.org/10.1016/j.conbuildmat.2017.09.045CrossRef

Li X, Feng J, Jiang Y, Lin H, Feng J (2018) Preparation and properties of TaSi₂ -MoSi₂ -ZrO₂ -borosilicate glass coating on porous SiCO ceramic composites for thermal protection. Ceram Int 44(16):19143–19150. https://doi.org/10.1016/j.ceramint.2018.06.159CrossRef

10.

Uyanna O, Najafi H (2020) Thermal protection systems for space vehicles: A review on technology development, current challenges and future prospects. Acta Astronaut 176:341–356. https://doi.org/10.1016/j.actaastro.2020.06.047CrossRef

11.

He Y, Li Q, Kuila T, Kim NH, Jiang T, Lau K, Lee JH (2013) Micro-crack behavior of carbon fiber reinforced thermoplastic modified epoxy composites for cryogenic applications. Compos B 44(1):533–539. https://doi.org/10.1016/j.compositesb.2012.03.014CrossRef

12.

Ling Y, Zhang X, Yan L, Zhang H, Wang Y, Ge Y, Chen Z, Chen Y, Zou H, Liang M (2022) Silicone-grafted epoxy/carbon fiber composites with superior mechanical/ablation performance. Mater Chem Phys 275:125283. https://doi.org/10.1016/j.matchemphys.2021.125283CrossRef

13.

Liu D, Chen P, Yu Q, Ma K, Ding Z (2014) Improved mechanical performance of PBO fiber-reinforced bismaleimide composite using mixed O₂ /Ar plasma. Appl Surf Sci 305:630–637. https://doi.org/10.1016/j.apsusc.2014.03.150CrossRef

14.

Chen X, Liu H, Jiang R, Bai H (2022) Study on the macro- and micro-mechanical properties of quartz fiber reinforced polyimide resin matrix composite after thermal aging. Compos Struct 292:115666. https://doi.org/10.1016/j.compstruct.2022.115666CrossRef

15.

Ramaswamy K, Modi V, Rao PS, Martin PP, McCarthy CT, O’Higgins RM (2023) An investigation of the influence of matrix properties and fibre–matrix interface behaviour on the mechanical performance of carbon fibre-reinforced PEKK and PEEK composites. Compos A 165:107359. https://doi.org/10.1016/j.compositesa.2022.107359CrossRef

16.

Peng Q, Liu M, Huang Y, Ma G, Guo W, Wang H, Xing Z (2023) Preparation and properties of Al₂O₃ -PF composite functional protective coating on the surface of polymer matrix composites. Surf Coat Technol 456:129138. https://doi.org/10.1016/j.surfcoat.2022.129138CrossRef

17.

Demircan G, Kisa M, Ozen M, Acikgoz A, Isiker Y, Aytar E (2023) Nano-gelcoat application of glass fiber reinforced polymer composites for marine application: Structural, mechanical, and thermal analysis. Mar Pollut Bull 194:115412. https://doi.org/10.1016/j.marpolbul.2023.115412CrossRefPubMed

18.

Tian H, Wang C, Guo M, Cui Y, Gao J, Tang Z, Liang Y, Song C, Wang H, Jin G, Wei S (2020) Study on process and performance of thermal protective coating on polyimide resin matrix composite surface. Ceram Int 46(8):12744–12758. https://doi.org/10.1016/j.ceramint.2020.02.043CrossRef

19.

Rezzoug A, Abdi S, Kaci A, Yandouzi M (2017) Thermal spray metallisation of carbon fibre reinforced polymer composites: effect of top surface modification on coating adhesion and mechanical properties. Surf Coat Technol 333:13–23. https://doi.org/10.1016/j.surfcoat.2017.10.066CrossRef

20.

Huang W, Cheng H, Zhang C, Zhou Y, Cao X (2015) Thermal ablation of stabilized zirconia/metal coated polyimide matrix composites via plasma spray process. Plasma Chem Plasma Process 35(4):587–603. https://doi.org/10.1007/s11090-015-9612-2CrossRef

21.

Huang W, Gan X, Zhu L (2017) Fabrication and property of novel double-layer coating deposited on polyimide matrix composites by atmospheric plasma spraying. Ceram Int 44(5):5473–5485. https://doi.org/10.1016/j.ceramint.2017.12.181CrossRef

22.

Duguet T, Senocq F, Laffont L, Vahlas C (2013) Metallization of polymer composites by metalorganic chemical vapor deposition of cu: surface functionalization driven films characteristics. Surf Coat Technol 230:254–259. https://doi.org/10.1016/j.surfcoat.2013.06.065CrossRef

23.

Maurer C, Schulz U (2013) Erosion resistant titanium based PVD coatings on CFRP. Wear 302(1–2):937–945. https://doi.org/10.1016/j.wear.2013.01.045CrossRef

24.

Maurer C, Schulz U (2014) Solid particle erosion of thick PVD coatings on CFRP. Wear 317(1–2):246–253. https://doi.org/10.1016/j.wear.2014.05.016CrossRef

25.

Huang W, Zhen W, Xu J, Fan X, Ying W, Zou B, Cao X (2013) Novel thermal protection coating based on Zr_0.75Ce_0.25O₂/phosphate duplex system for polyimide matrix composites fabricated via a combined sol-gel/sealing treatment process. Corros Sci 74:22–34. https://doi.org/10.1016/j.corsci.2013.04.003CrossRef

26.

Huang W, Zou B, Yu Z, Meng X, Wang C, Cao X, Wang Z (2012) Fabrication of novel thermal barrier coating on polymer composites via the combined sol-gel/sealing treatment process. Appl Surf Sci 258(22):9058–9066. https://doi.org/10.1016/j.apsusc.2012.05.161CrossRef

27.

Liu A, Guo M, Zhao M, Hong M, Hu S (2006) Arc sprayed erosion-resistant coating for carbon fiber reinforced polymer matrix composite substrates. Surf Coat Technol 200(9):3073–3077. https://doi.org/10.1016/j.surfcoat.2005.01.042CrossRef

28.

Maurer C, Schulz U (2013) Erosion resistant titanium based PVD coatings on CFRP. Wear 302:937–945. https://doi.org/10.1016/j.wear.2013.01.045CrossRef

29.

Rezzoug A, Abdi S, Kaci A, Yandouzi M (2018) Thermal spray metallisation of carbon fibre reinforced polymer composites: Effect of top surface modification on coating adhesion and mechanical properties. Surf Coat Technol 333:13–23. https://doi.org/10.1016/j.surfcoat.2017.10.066CrossRef

30.

Przemysław G, Tomasz S (2018) A novel application of alumina fiber mats as TBC protection for CFRP/epoxy laminates –Laboratory tests and numerical modeling. J Eur Ceram Soc 38(8):2920–2927. https://doi.org/10.1016/j.jeurceramsoc.2018.01.008CrossRef

31.

Przemysław G, Tomasz S (2019) Description of thermal protection against heat transfer of carbon fiber reinforced plastics (CFRP) coated by stiffened ceramic mat (TBC). Compos Struct 229–111489. https://doi.org/10.1016/j.compstruct.2019.111489

32.

Jia Y, Ajayi TD, Wahls BH, Ramakrishnan KR, Ekkad S, Xu C (2020) Multifunctional ceramic composite system for simultaneous thermal protection and electromagnetic interference shielding for carbon fiber-reinforced polymer composites. ACS Appl Mater Interfaces 12(52):58005–58017. https://doi.org/10.1021/acsami.0c17361

33.

Fallah P, Rajagopalan S, McDonald A, Yue S (2018) Development of hybrid metallic coatings on carbon fiber-reinforced polymers (CFRPs) by cold spray deposition of copper-assisted copper electroplating process. Surf Coat Technol 400:126231. https://doi.org/10.1016/j.surfcoat.2020.126231CrossRef

34.

Cui Y, Wang C, Tang Z (2021) Erosion resistance improvement of polymer matrix composites by detonation-sprayed multilayered coatings. J Therm Spray Tech 30:394–404. https://doi.org/10.1007/s11666-020-01120-8CrossRef

35.

Pan B, Ren P, Zhou T, Cai Z, Zhao X, Zhou H, Xiao L (2020) Microstructure and property of thermal insulation coating on the carbon fiber reinforced epoxy resin composites. J Inorg Mater 35(8):947–952. https://doi.org/10.15541/jim20190532

36.

Jia Y, Ajayi TD, Ramakrishnan KR, Negi A, Liu J, Ekkad S, Xu C (2020) A skin layer made of cured polysilazane and yttria stabilized zirconia for enhanced thermal protection of carbon fiber reinforced polymers (CFRPs). Surf Coat Technol 404:126481. https://doi.org/10.1016/j.surfcoat.2020.126481CrossRef

37.

Huang W, Cheng H, Zhang C, Zhou Y, Cao X (2015) Thermal ablation of stabilized zirconia/metal coated polyimide matrix composites via plasma spray process. Plasma Chem Plasma Process 35:587–603. https://doi.org/10.1007/s11090-015-9612-2CrossRef

38.

Huang W, Zhao Y, Fan X, Meng X, Wang Y, Cai X, Cao X, Wang Z (2013) Effect of bond coats on thermal shock resistance of thermal barrier coatings deposited onto polymer matrix composites via air plasma spray process. J Therm Spray Technol 22:918. https://doi.org/10.1007/s11666-013-9942-7CrossRef

39.

Huang W, Fan X, Zhao Y, Zhou X, Meng X, Wang Y, Zou B, Cao X, Wang Z (2012) Fabrication of thermal barrier coatings onto polyimide matrix composites via air plasma spray process. Surf Coat Technol 207:421. https://doi.org/10.1016/j.surfcoat.2012.07.042CrossRef

40.

Huang W, Cheng H, Zhou Y (2015) Oxidation behavior of plasma-sprayed stabilized zirconia/Al coated polymer matrix composites. RSC Adv 5:72331. https://doi.org/10.1039/C5RA11270BCrossRef

41.

Zhu L, Huang W, Cheng H, Cao X (2014) Thermal shock resistance of stabilized zirconia/metal coat on polymer matrix composites by thermal spraying process. J Therm Spray Technol 23:1312. https://doi.org/10.1007/s11666-014-0144-8CrossRef

42.

Bauer F, Decker U, Dierdorf A, Ernst H, Heller R, Liebe H, Mehnert R (2005) Preparation of moisture curable polysilazane coatings: Part I. Elucidation of low temperature curing kinetics by FT-IR spectroscopy. Prog Org Coat 53:183–190. https://doi.org/10.1016/j.porgcoat.2005.02.006CrossRef

Titel: Preparation and characterization of polysilazane-based thermal protective coating for CFRP
verfasst von: Zhaoyang Fan
Chao Xiong
Junhui Yin
Youchun Zou
Xiujie Zhu
Publikationsdatum: 01.11.2023
Verlag: Springer Netherlands
Erschienen in: Journal of Polymer Research / Ausgabe 11/2023
Print ISSN: 1022-9760
Elektronische ISSN: 1572-8935
DOI: https://doi.org/10.1007/s10965-023-03814-3

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 11/2023

Synthesis of a novel siloxane-based crosslink agent and its application in emulsion copolymerization of butyl acrylate and methyl methacrylate

Robust silicone rubber with high transparency by loading with porous hollow glass microsphere

Artificial intelligence-based optimization for ring-opening metathesis polymerization of proton exchange membrane

Impact of polymer particle purification on the structural and catalytic properties of in situ generated gold nanoparticles

Synthesis of ultrahigh molecular weight poly(butyl acrylate) in the presence of palladium nanoparticles

Synergistic effects of graphite and carbon nanotube hybrid fillers on key properties of epoxidized natural rubber nanocomposites

Premium Partner

Marktübersichten