nach oben

Geotechnical and Geological Engineering

Erschienen in:

01.08.2008 | Original Paper

Theoretical Concept to Understand Plan and Design Smooth Blasting Pattern

verfasst von: S. K. Mandal, M. M. Singh, S. Dasgupta

Erschienen in: Geotechnical and Geological Engineering | Ausgabe 4/2008

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Considering different mechanical cutting tools for excavation of rock, drilling and blasting is said to be inexpensive and at the same time most acceptable and compatible to any geo-excavation condition. Depending upon strength properties of in-situ rock mass, characteristics of joint pattern and required quality of blasting, control blasting techniques viz., pre-split and smooth blasting are commonly implemented to achieve an undamaged periphery rock-wall. To minimize magnitude of damage or overbreak, the paper emphasized that in-situ stresses and re-distribution of stresses during the process of excavation should be considered prior to selection of explosive parameters and implementation of any suitable blast pattern. Rock structure being not massive in nature, the paper firstly explains the influence of discontinuities and design parameters on smooth-wall blasting. Considering the empirical equations for estimation of stress wave’s magnitude and its attenuation characteristics through transmitting medium, the paper has put forward a mathematical model for smooth blasting pattern. The model firstly illustrates that rock burden for each hole should be sub-divided into thin micro strips/slabs to understand the characteristics of wave transmission through the medium and lastly with the help of beam theory of structural dynamics have put forward a mathematical model to analyze and design an effective smooth blasting pattern to achieve an undamaged periphery rock-wall.

Vorheriger Artikel Equivalent Continuum Simulations of Geocell Reinforced Sand Beds Supporting Strip Footings

Nächster Artikel Factors Affecting Consolidation Related Prediction of Singapore Marine Clay by Observational Methods

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Abraham FF (1994) Instability dynamics of fracture. A computer simulation investigation. Phys Rev Lett 73:272CrossRef

Barton NR (1976) The shear strength of rock and rock joints. Int J Mech Min Sci Geomech Abstr 131(10):1–24

Barton NR, Choubey V (1977) The shear strength of rock joints in the theory and practice. Rock Mech 10(12):1–54CrossRef

Barton NR, Lien R, Lunde J (1974) Engineering classification of rock masses for design of tunnel support. Rock Mech 6(4):189–239CrossRef

Bermudez PG, Jimeno CL, Sanchidrian JA (1999) Improvement of productivity in quarrying dimension stone using blasting and drilling techniques. In: VIth international symposium on rock fragmentation by blasting. South African Institute of Moining and Metallurgy, Johhanesburg, pp 241–246

Birkimer DL (1971) A possible fracture criteria for the dynamic tensile strength of rock. In: Proceedings of the 12th symposium rock mechanism (Ed. Clark GB), Baltimore, Maryland, pp 573–590

Blastingtechnology, talking technically, M/s Atlas Copco, (internet search), 1990. Extract from Stig Olofsson’s book entitled “Applied Explosive technology for Construction and Mining published by Apples, PO Box, 71, S-64043, Arla, Sweden

Bogdanoff I (1996) Vibration measurement in the damage zone in tunnel blasting. Rock fragmentation by blasting FRAGBLAST-5, Balkema Publisher

Brent GF, Smith GE (1999) The detection of blast damage by borehole pressure measurement. In: Proceedings of the 6th symposium on rock fragmentation by blasting FRAGBLAST-6, Johannesburg, South Africa

Brown ET, Green SJ, Sinha KP (1981) The influence of rock anisotropy on hole deviation in rotary drilling—a review. J Rock Mech Min Sci Geomech Abstr 18:387–401CrossRef

Chiappetta RF (1991) Pre-splitting and controlled blasting techniques including air decks and dimension stone criteria. In: Chiappetta RF (ed) Proceedings of blast technology, instrumentation and explosives applications seminar, san Diego, USA

Chiappetta FR (1994) New findings on the impact of an explosive VOD on blast results. In: Proceedings of the 12th annual conference on explosive and blasting technology Austin, Texas, January

Clader P (1977) Pit slope manual. Canmet Report 77–14. Chapter 7, 13–22. CANMET Canada Centre for Mineral & Energy Technology, Ministry of Supply & Services, Canada

Colback PSB, Wild BL (1965) The influence of moisture content on the compressive strength of rock. In: Proceedings of 3rd Canadian rock mechanic symposium, Toronto, pp 65–83

Cunningham CVB (2000) The effect of timing precision on control of blasting effects. In: Holmberg R (ed) Conference on explosive and blasting technique. Balkema Publisher, Rotterdam, pp 123–127

Cunningham CVB, Goetzsche AF (1996) The specification of blast damage limitations in tunneling contracts. Tunnel Undergr Space Technol 5(3):23–27

Daehnke A, Rossmanith HP, Knasmiller (1996) Blast induced dynamic fracture propagation. In: Proceedings of the 5th international symposium on rock fragmentation by blasting, pp 13–24

Dunn P, Cocker A (1995) Pre-splitting wall control for surface coal mines. In: Proceedings of EXPLO’95 conference Brisbane 407 Sept, AusIMM, Melbourne, pp 307–314

Fordyee DL, Fourney WL, Dick RD, Wang XJ (1993) Effects of joints on stress wave transmission. In: Proceedings of 4th international symposium on rock fragmentation, pp 211–219

Fourney WL (1993) A discussion of blast-induced overbreak around excavation. In: Proceedings of the 4th international symposium on rock fragmentation by Blasting (Ed. Rossamanith), Vienna, Austria, pp 161–166

Fourney WL, Dick RD (1995) The utilization of explosive loading as a non-destructive evaluation tool in geological materials. Int J Solids Struct 32(17/18):2511–2522 CrossRef

Forsyth WW (1993) A discussion of blast-induced overbreak around underground excavations. Rock fragmentation by blasting, FRAGBLAST-4, pp 161–166

Forsyth WW, Moss AE (1990) Observations of blasting and damage around development openings. In: 92nd Canadian institute min metall annual general meeting, Ottawa

Freeman R, Roberts B (2002) Blast design & Optimization at Carrol Cave, Missori, 10820 Mining Industry Project: Formulation, University of South Australia, Faculty of Engg and Env, School of Geosciences, Minerals & Civil Engg, Online Search, Yahoo

Gunnar N (2001) Drilling accuracy in underground construction, World Tunnelling (Internet Search)

Guo ZQ (1982) Wave in solid objects. Earthquake Publishing House, Beijing

Hagan TN (1982) Controlling blast induced cracking around large caverns. In: Proceedings of the ISRM symposium on rock mechanics related to caverns and pressure shafts, Achen, West Germany, pp 1155–1167

Harries G (1978) Breakage of rock by explosives. Rock breaking—equipment and technology. Australian Institute of Mining and Metallurgy, Parkville, Victoria

Henrych J (1979) The dynamics of explosion and its use. Elsevier Scientific Publishing Company, Amsterdam The Netherlands

Hoek E (1998) Rock engineering (Course notes by Everest Hoek) 312 pp

Hoek E, Bray JW (1977) Rock slope engineering. Institution of Min Metall, London, 401 pp

Holmberg R, Persson PA (1979) Design of tunnel perimeter blast hole patterns to prevent rock damage. IMM Proceedings on tunnelling, London, 12–16 March, pp 280–283

Holmberg R, Persson PA (1980) Design of tunnel perimeter blasthole patterns to prevent rock damage. Trans Inst Min Metall vol A: 37–70, London, UK

Hustrulid W (1994) The practical blast damage zone in drift driving at the Kiruna Mine. In: Skadezon vid tunnel & tunnel driving. Swedish rock engineering research Report No. 8, SveBeFo, Stockholm, pp 75–125

Hustrulid W (1999) Blasting principles for open pit mining, vol 1 & 2, Sect. 10.4.4 (vol 1) and Chapter, 14 (vol 2). A. A. Balkema, Rotterdam

Hustrulid W, Bennet R, Ashland F, Lenjani M (1992) A new method for predicting the extension of the blast damaged zone. In: Proceedings of blasting conference, Nitro Nobel, 15–16 January

Johansson CH, Persson PA (1970) Detonics of high explosives. Academic Press, London, 330 pp

Johansson CH, Persson PA (1974) Fragmentation systems 3rd International Congress Rock Mechanism Denver, pp 1957–1966

John M (1974) Time-dependence of fracture process materials. Advance in Rock Mech, Proceedings of 3rd congress of the international society for rock mechanism, National Academy of Sciences, Washington, DC, vol IIA, pp 330–335

Katsabanis PD, Yeung C (1993) Effects of low amplitude shock waves on commercial explosives—the sympathetic detonation problem. In: Proceedings of the 4th symposium on rock fragmentation by Blasting_FRAGBLAST-4, Vienna, Austria

Katsabanis PD, Yeung C, Fritz G, Heater R (1994) Explosives malfunction from sympathetic detonation to shock desentitization. In: Proceedings of the tenth symposium on explosive and blasting research, Austin, Texas, January

Keegan MM, Bennett P, Adamson W (2000) A preliminary study of explosive selection for optimum perimeter/wall control in development blasting. In: Holmberg R (ed) Conference on explosive and blasting technique. Balkema Publisher, Rotterdam, pp 327–333

Khoshrou SH, Mohanty B (1996) Role of discontinuity on stress field in wall control blasting. In: Mohanty B (ed) Rock fragmentation by blasting. Balkema, Rotterdam, pp 207–216

Kolsky H (1983) Stress waves in solids. Dover Publications Inc, New York

Korea HighWay Corporation (2000) Design guide of the optimum blasting patterns for minimizing overbreak

Kou S, Rustan A (1992) Burden related to blasthole diameter in rock blasting. Int J Rock Mech Min Sci Geomech Abstr 29(6):543–553CrossRef

Krauland N (1994) Experiences from damage zones in the mining business. In: Skadezonvid (ed) Tunneldriving. Swedish Rock Engineering Research Report No 8, SveBeFo, Stockholm

Laubscher DH (1975) Class distinction in rock masses, coal, gold base minerals, S Africa, 23 August, pp 37–50

Laubscher DH (1977) Geomechanic classification of jointed rock masses—mining applications. J Inst Eng, UK, pp A1–A48

Laubscher DH, Taylor HW (1976) The importance of geomechanics of jointed rock masses in mining operations. International symposium on exploration for rock engineering, Johannesburg, 1–5 November

Laubscher DH, Taylor HW (1990) A geomechanics classification system for rating of rock mass in mine design. J S Afr Inst Min Metall 90(10):257–273

Lee RA, Rodgers JA, Whitaker KC (2000) The origin and effects of inter-deck pressure in decked blasts. In: Holmberg R (ed) Conference on explosive and blasting technique. Balkema Publisher, Rotterdam, pp 347–353

Lewandowski T, Luan Mai VK, Danell R (1996) Influence of discontinuities on presplitting effectiveness. In: Proceedings of the 5th international symposium on rock fragmentation by blasting, Montreal, Canada, August, pp 217–225

Li W, Chen J (2001) Study on smooth blasting results in jointed and fractured rock. J China Univ Geosci 12(2):145–149

Liqing L, Katsabanis PD (1996) Numerical modeling of the effects of air decking/decoupling in production and controlled blasting. In: Proceedings of 5th international symposium on rock fragmentation by blasting, Montreal, pp 319–330

Liu Q (2002) Estimation of dynamic pressure around a fully loaded blasthole in rock. In: VIIth international symposium on rock fragmentation by blasting, Beijing, China, pp 267–272

Liu Q, Tidman JP (1995) Estimation of the dynamic pressure around a fully loaded borehole. Canmet/MRL technical report 95–014, Canmet/MRL expermental mine, PO Box 1300, Valda’r Quebec

Mandal SK, Singh MM, Bhagat NK, Dasgupta S (2005) Causes of overbreak and influence of blast parameters for smooth undamaged wall. In: International symposium on advances in mining technology and management, IIT, Kharagpur, November 30–December 2

Mandal SK, Singh MM, Bhagat NK, Dasgupta S (2006) Charge parameters and its impact on ground vibration. First Asian Mining Congress, Indian Mining, Geological and Metalurgical Institute, Kolkata, 16–18 Jan, pp 405–411

Mandal SK, Singh MM, Bhagat NK, Dasgupta S (2007) Model for energy-based evaluation of blast waves to assess safety of structures. Int J Mining, Reclamat Environ 21(2):111–125CrossRef

McKenzie CK, Scherpenisse CR, Arriagada J, Jones JP (1995) Aplication of computer assisted modelling to final wall blast design. In: Proceedings of Expo’95 conference, pp 289–290 (Australasia Inst of Min and Metallurgy)

McKnow AF (1986) Perimeter control blasting for underground excavations in fractured and weathered rock. Bulletin of the association of Engineering geologists XXIII(4):461–478

Muller B, Bohnke R (2002) Theoretical simulation and practical results at the optimization of blasts in rock masses based on momentum theory. In: VII international symposium on rock fragmentation by blasting, Beijing, China, 11–15 August, pp 226–235

Nie S (1999) Borehole pressure in blast holes, measurement in granite blocks versus estimation. SveBeFo Report 42, Stockholm, Sweden

Nyberg U, Fjellborg S (2000) Controlled drifting and estimation of blast damage. In: Holmberg R (ed) Proceedings of first world conference on explosive and blasting technology. A. A. Balkema, Rotterdam, pp 207–216

Nyberg U, Fjellborg S, Olsson M, Outcherlony F (2000) Judging blast damage in drift perimeters. Vibration measurements, damage prediction and fracture mapping in magnetite. SwedishRock Engineering Research Report No. 50. SveBeFo, Stockholm

Olsson M, Bergqvist I (1993) Crack lengths from explosives in small diameter boreholes. In: Rossamanith (ed) Proceedings of 4th international symposium on rock fragmentation by blasting. Balkema, Rotterdam, pp 193–196

Olsson M, Bergqvist I (1996) Crack lengths from explosive in multiple hole blasting. In: Proceedings of the 5th international symposium on rock fragmentation by blasting. Balkema, Rotterdam, pp 187–191

Outcherlony F (1997) Prediction of crack lengths in rock after cautious blasting with zero inter-hole delay. Int J Blast Fragment, pp 417–444

Ouchterlony F, Sjoberg C, Jonsson BA (1993) Blast damage prediction from vibration measurements at the SKB underground Laboratories at Aspo in Sweden. In: Proceedings of the 9th annual symposium on explosive and blasting research. ISEE, Cliveland, USA, pp 189–197

Ouchterlony F, Olsson M, Bavik SO (2000) Perimeter blasting in a 130 m road cut in Gneiss with holes with radial bottom slots. In: Holmberg R (ed) Proceedings of 1st world conference on explosive and blasting technique, pp 225–234

Palmstorm A (1996) Rmi—a system for characterizing rock mass strength for use in rock engineering. J Rock Mech Tunnel Technol, India 29(1):69–108

Paventi M, Lizotte Y, Scoble M, Mohanty B (1996) Mesauring rock mass damage in drifting. In: Mohanty B (ed) Rock fragmentation by blasting. Balkema, Rotterdam, pp 131–138

Persson PA, Holmberg R, Lee J (1993) Rock blasting and explosive engineering. CRC Press, Boca Raton

Price DG, Knill JL (1966) A study of the tensile strength of isotropic rocks. In: Proceedings of 1st congress international society rock mechanism Lisbon, pp 439–442

Pusch R, Stanfors R (1992) The zone of disturbance around blasted tunnels at depth. Int J Rock Mech Min Sci Geomech Abstr 29(5):447–456CrossRef

Pusch R, Stanfors R (1993) Disturbance of rock around blasted tunnels. In: Proceedings of the IVth international symposium on rock fragmentation by blasting—FRAGBLAST-4, Vienna/Austria, 5–8 July, pp 153–160

Sanchidrian JA, Bermudez PG, Jimeno CL (1998) On borehole pressure and spacing in cautious blasting with an extension to water filled holes. Int J Blast Fragment, FRAGBLAST 2:235–248

Sanchidrian JA, Segarra P, Lopez LM (2007) Energy components in rock blasting. Int J Rock Mech Mining Sci 44(1):130–147CrossRef

Scoble M, Lizotte Y, Paventi M (1996) Rock mass damage from blasting: characterization and impact. In: Franklin J, Katsabanis P (eds) Proceedings of the workshop on measurement of blast fragmentation. A. A. Balkema, pp 225–235

Seto M, Nag DK, Vutukuri VS (1996) Evaluation of rock mass damage using acoustic emission technique in the laboratory. In: Mohanty B (ed) Proceedings of the 5th international symposium on rock fragmentation by blasting. Montreal, Canada, pp 139–145

Simha KRY (1996) Effect of open joint on stress wave propagation. In: Mohanty B (ed) Vth international symposium on rock fragmentation by blasting, pp 81–86

Singh MM (1981) Strength of rock physical properties of rocks and minerals, vol 2. McGraw-Hill Book Co, New York, pp 83–121

Singh SP (1992) Investigation of blast damage mechanism in underground mines. Report to the Mining Research Directorate, Laurentian University

Singh SP (1995) Mechanics of cut blasting. Trans Instit Mining Metallur 104:A134–A138

Singh SP (1996) Mechanics of tracer blasting. In: Geotechnical and Geological Engineering 14. Chapman & Hall, London, pp 41–50

Singh SP (1998) The effects of rock mass characterization on blasthole deviation. CIM Bull 91(1016):90–95

Singh SP (2000) The influence of rock mass characterization on overbreak control. In: Proceedings of the 26th annual conference on explosive and blasting techniques. Anaheim 2:117–129

Singh SP, Xavier P (2005) Causes, impact and control of overbreak in underground excavations. Tunnel Undergr Space Technol 20:63–71CrossRef

Sjoberg C (1979) Cracking zones around slender borehole charges. In: Proceedings of annual discussion meeting BK-79. Swedish rock construction committee, Stockholm, pp 53–98

Sjoberg C, Larsson B, Lindstrom M, Palmqvist K (1997) A blasting method for controlled crack extension and safety underground. ASF Project No. 77/224, Nitro Consult, Gothenburg

Song J, Kim K (1995) Micro-mechanical modelling to study smooth blasting. SME annual meeting, Denver, Colorado

Szuladzinski G (1993) response of rock medium to expl. borehole pressure. In: Proceedings off the 4th symposium on rock fragmentation by blasting, FRAGBLAST-4, Vienna, Austria

Tariq SM, Worsey PN (1996) An investigation into the effect of varying joint aperture and nature of surface on pre-splitting. In: Proceedings of 12th symposium on explosive and blasting research, Orlando, pp 186–195

Taylor LM, Chen EP, Kuszamul JS (1986) Microcrack induced damage accumulation in brittle rock under dynamic loading. Comput Methods Appl Mech Eng 55:301–320CrossRef

Tezuka M, Hasui A, Kudo Y, Nakagawa K (1999) A study of blasting damage in surrounding rock mass of Cavern. Challenges for the 21st century, Proceedings of world tunnel congress’99 blasting. Balkema, pp 791–797

Thuro K, Plinninger RJ, Zah S, Schutz S (2001a) Scale effects in rock strength propertiues. Part-I: Unconfined compressive test and Brazilian Test. ISRM regional symposium. EUROCK 2001. Rock Mechanics a Challenge for Society, ESPOO, Finland, 3–7 June

Thuro K, Plinninger RJ, Zah S, Schutz S (2001b) Scale effects in rock strength propertiues. Part-2: Point load test and point load strength index. ISRM regional Symp. EUROCK 2001. Rock Mechanics a Challenge for Society, ESPOO, Finland, 3–7 June

Worsey P, Qu S (1987) Effect of joint separation and filling on presplit blasting. In: Proceedings of the 3rd mini symposium on explosive and blasting research, Miami, USA, pp 26–40

Worsey P, Farmer IW, Matheson GD (1981) The mechanics of presplitting in discontinuous rock. In: Proceedings of the 22nd US rock mechanics symposium UO, Missouri, Rolla, USA, pp 205–210

Wu MB, Gao JB (1987) Experimental study on dynamic properties of the Yangquan coal. Chinese J Coal 3:31–37

Wu A, Lin B, Wang H, Zhang K (2002) Study of blasting without pre-cut slot by using cylindrical explosive, VII international symposium on rock fragmentation by blasting, Beijing, China, 11–15 August, pp 208–211

Yamamoto M, Ichijo T, Moorooka K, Kaneko K (1999) Experimental and theoretical study on smooth blasting with electronic delay detonators. Int J Blast Fragment 3:3–24

Yang RL, Bawden WF, Talebi S, Rocque P (1993) An integrated technique for vibration dian Mining and Metallurgical Buletin, 86, 972

Yang RL, Bawden WF, Katsabanis PD (1996) A new constitutive model of blast damage. Int J Rock Mech, Mining Sci Geomech, Abstr 33:245–254

Titel: Theoretical Concept to Understand Plan and Design Smooth Blasting Pattern
verfasst von: S. K. Mandal
M. M. Singh
S. Dasgupta
Publikationsdatum: 01.08.2008
Verlag: Springer Netherlands
Erschienen in: Geotechnical and Geological Engineering / Ausgabe 4/2008
Print ISSN: 0960-3182
Elektronische ISSN: 1573-1529
DOI: https://doi.org/10.1007/s10706-008-9177-4

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 4/2008

Equivalent Continuum Simulations of Geocell Reinforced Sand Beds Supporting Strip Footings

Numerical Simulation of Bed Separation Development and Grout Injecting into Separations

Assessment and Control of Ore Dilution in Long Hole Mining: Case Studies

Measurement and Analysis of Pore Water Pressure in Large Caverns and Shafts in a Hydro-electric Project

Dynamic Response of Machine Foundation on Layered Soil: Cone Model Versus Experiments

Factors Affecting Consolidation Related Prediction of Singapore Marine Clay by Observational Methods