nach oben

Erschienen in:

01.11.2023 | Original Paper

Efficiency assessment of the SEBS, SEP, and SBS copolymers in the compatibilization of the PS/ABS blend

verfasst von: Válmer Azevedo de Sousa Filho, Mario Alberto de Albuquerque Filho, Marcela Cristine de Alencar Lira, Thiago Cajú Pedrosa, Lindoval Serrano da Fonseca, Suelene Silva Araújo, Mariana Alves Henrique, Eduardo da Silva Barbosa Ferreira, Edcleide Maria Araújo, Carlos Bruno Barreto Luna

Erschienen in: Journal of Polymer Research | Ausgabe 11/2023

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Polystyrene (PS)/acrylonitrile-butadiene-styrene (ABS) blends were processed in a corrotational twin-screw extruder and molded by injection. Styrene-(ethylene-propylene) (SEP), styrene-(ethylene-butylene)-styrene (SEBS), and styrene-butadiene-styrene (SBS) copolymers were tested as compatibilizing agents. The rheological, mechanical, thermal, thermomechanical, spectroscopic, and morphological behavior were reported. The type of compatibilizer greatly influences the final performance of the PS/ABS, considering that the incorporation of SEP formed a brittle and incompatible blend. In contrast, SEBS containing styrene terminal groups on both sides of the molecular structure, formed a PS/ABS blend with greater ductility. However, it has lower performance compared to SBS. The torque rheometry increased, and the melt flow index (MFI) reduced significantly for the PS/ABS/SBS blend, indicating more significant interaction between the components. As a result, gains of 113.7% and 379.3% in impact strength and elongation at break compared to PS. In addition, elastic modulus, tensile strength, Shore D hardness, and heat deflection temperature (HDT) maintained high results, confirming a synergistic effect of the PS/ABS/SBS blend. By thermogravimetry (TG), a gain of around 22 °C was observed in the PS/ABS/SBS blend for a mass loss of 50%, possibly due to acrylonitrile. Scanning electron microscopy (SEM) and atomic force (AFM) analyses reinforced these excellent results, revealing better compatibility and a more homogeneous distribution of ABS in the PS matrix in the presence of SBS. The PS/ABS/SBS blend results indicate potential applications such as electronics, air conditioning grilles, and toys.

Vorheriger Artikel Synthesis of a single-component intumescent flame retardant and its high efficiency in imparting flame retardancy to polylactic acid

Nächster Artikel Robust silicone rubber with high transparency by loading with porous hollow glass microsphere

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Liu C, Li C, Hao Y, Yan X, Deng H, Pan H, Bian J, Wang D, Zhao Y, Zhang H (2023) Preparation and characterization of poly(butylene succinate-co-adipate)/poly(lactic acid) blends with enhanced compatibility, mechanical properties, and heat resistance. J Polym Res 30:379. https://doi.org/10.1007/s10965-023-03771-xCrossRef

Son Y, Lee S (2023) Compatibility between aliphatic polyketone terpolymer and Nylon6 polymer blend. J Polym Res 30:33. https://doi.org/10.1007/s10965-022-03414-7CrossRef

Robeson L (2014) Historical perspective of advances in the science and technology of polymer blends. Polymers 6(5):1251–1265. https://doi.org/10.3390/polym6051251CrossRef

la Mantia FP, Morreale M, Botta L, Mistretta MC, Ceraulo M, Scaffaro R (2017) Degradation of polymer blends: A brief review. Polym Degrad Stab 145(11):79–92. https://doi.org/10.1016/j.polymdegradstab.2017.07.011CrossRef

Yan X, Jia S, Zhang Y, Han L, Bian J, Yang H, Pan H, Wu G, Zhang H (2022) Influence of reaction compatibilization on mechanical and barrier properties of poly(lactic acid)/ethylene–methyl acrylate-glycidyl methacrylate terpolymer films. J Polym Res 29:80. https://doi.org/10.1007/s10965-022-02932-8CrossRef

Luna CBB, Siqueira DD, Ferreira ESB, Araújo EM, Wellen RMR (2021) Reactive processing of PA6/EPDM-MA blends as modifier for application and development of high-performance polypropylene. J Vinyl Addit Technol 27(4):736–756. https://doi.org/10.1002/vnl.21846CrossRef

Darweesh MH, Stoll B, Taweel SHE (2023) Compatibilization of polypropylene/high-density polyethylene blends using poly(propylene-co-ethylene). J Appl Polym Sci 140(15). https://doi.org/10.1002/app.53687CrossRef

Shi W, Chen Z (2023) Mechanical, rheological, and crystallinity properties of polylactic acid/polyethylene glycol-polydimethylsiloxane copolymer blends by melt blending. J Appl Polym Sci 140(4). https://doi.org/10.1002/app.53346CrossRef

Doan TTL, Muller MT, Nguyen HM (2022) Effects of different polyolefin copolymers on properties of melt mixed polypropylene blends. J Appl Polym Sci 139(30). https://doi.org/10.1002/app.52691CrossRef

10.

Casamento F, D’Anna A, Arrigo R, Frache A (2021) Rheological behavior and morphology of poly(lactic acid)/low-density polyethylene blends based on virgin and recycled polymers: Compatibilization with natural surfactants. J Appl Polym Sci 138(25):50590. https://doi.org/10.1002/app.50590CrossRef

11.

Song L, Zhang Q, Hao Y, Cong F, Chi W, Li Y, Liu Z, Shi Y (2022) Influence of the structure of sub-micrometer core-shell rubber particles and matrix composition on the mechanical properties, morphological structure and deformation mechanism of rubber-modified polyphenylene oxide/polystyrene blends. J Appl Polym Sci 139(42). https://doi.org/10.1002/app.53032CrossRef

12.

Ferreira ESB, Nascimento EP, Luna CBB, Filho EAS, Wellen RMR, Araújo EM (2023) Tailoring the performance of poly(lactic acid)-based reactive blends: The effect of vinyl acetate and dicumyl peroxide contente. J Appl Polym Sci 140(35). https://doi.org/10.1002/app.54353CrossRef

13.

Wang D, Li F, Xu X, Zhong L, Guan C, Gao Y, Jiang W, Liang H (2022) Brittle ductile transition of POE toughened HDPE and its lowest rigidity loss: effect of HDPE molecular weight. J Polym Res 29:38. https://doi.org/10.1007/s10965-021-02882-7CrossRef

14.

Xu Y, Zhao C, Guo Z, Dong W, Liu X, Guo W (2022) EPDM-g-MAH toughened bio-based polyamide 56 to prepare thermoplastic polyamide elastomer and the performance characterization. J Appl Polym Sci 139(24):52346. https://doi.org/10.1002/app.52346CrossRef

15.

Luna CBB, Ferreira ESB, Costa ARM, Almeida YMB, Melo JBCA, Araújo EM (2023) Toward reactive processing of polyamide 6 based blends with polyethylene grafted with maleic anhydride and acrylic acid: effect of functionalization degree. Macromol React Eng 2300031. https://doi.org/10.1002/mren.202300031

16.

Júnior AJA, Saron C (2023) Mechanical recycling of expanded polystyrene and tire rubber waste as compatibilized and toughened blends. J Appl Polym Sci 140(32). https://doi.org/10.1002/app.54267CrossRef

17.

Ujcic M, Levak M, Penava NV, Bajsic EG, Kosar V (2023) Thermal degradation and thermal kinetic of SEBS block copolymer compatibilized PS/HDPE blends. J Elastomers Plast 55(1):82–98. https://doi.org/10.1177/00952443221140473CrossRef

18.

Raza Y, Raza H, Ahmad A, Quazi MM, Abid M, Kazmi MR, Rahman SMS, Zulfattah ZM, Fattah LMR (2021) Production and investigation of mechanical properties of graphene/polystyrene nanocomposites. J Polym Res 28:217. https://doi.org/10.1007/s10965-021-02560-8CrossRef

19.

Zhou C, Wu S, Yang B, Gao Y, Wu G, Zhang H (2015) Toughening polystyrene by core-shell rubber particles: analysis of the internal structure and properties. Polym Polym Compos 23(5). https://doi.org/10.1177/096739111502300505

20.

Wang F, Chang L, Hu Y, Wu G, Liu H (2019) Synthesis and properties of in-situ bulk high impact polystyrene toughened by high cis-1,4 polybutadiene. Polymers 11(5):791. https://doi.org/10.3390/polym11050791CrossRefPubMedPubMedCentral

21.

Coutinho FMB, Costa MPM, Guimarães MJOC, Soares BG (2007) Comparative study of different types of polybutadiene on the toughening of polystyrene. Polímeros: Ciência e Tecnologia 17(4):318-324. https://doi.org/10.1590/S0104-14282007000400011

22.

Fang Z, Guo Z, Zha L (2004) Toughening of Polystyrene with Ethylene-Propylene-Diene Terpolymer (EPDM) Compatibilized by Styrene-Butadiene-Styrene Block Copolymer (SBS). Macromol Mater Eng 289(8):743–748. https://doi.org/10.1002/mame.200300356CrossRef

23.

Luna CBB, Silva DF, Araújo EM, Mélo TJA, Bezerra EOT, Siqueira DD, Oliveira AD (2019) Blends of Polystyrene/Shoes Waste (SBRr): Influence of Mixture Sequence and Compatibilizer. Macromol Symp 383(1):1800046. https://doi.org/10.1002/masy.201800046CrossRef

24.

Banerjee R, Ray SS, Ghosh AK (2017) Investigations on Blending and Foaming Behavior of Styrene-Ethylene-Butylene-Styrene/Polystyrene Blends. Int Polym Proc 32(4):434–445. https://doi.org/10.3139/217.3362CrossRef

25.

Zhou J, Du XH, Yue W (2016) Study on the blend of SBS and polystryrene and properties of their mixture. 4th international conference on renewable energy and environmental technology. Adv Eng Res 112:1-4

26.

Zhang J, Chen H, Zhou Y, Ke C, Lu H (2013) Compatibility of waste rubber powder/polystyrene blends by the addition of styrene grafted styrene butadiene rubber copolymer: Effect on morphology and properties. Polym Bull 70:2829–2841. https://doi.org/10.1007/s00289-013-0991-3CrossRef

27.

Valentini F, Dorigato A, Pegoretti A (2020) Evaluation of the role of devulcanized rubber on the thermo-mechanical properties of polystyrene. J Polym Environ 28:1737–1748. https://doi.org/10.1007/s10924-020-01717-8CrossRef

28.

Luna CBB, Silva DF, Araújo EM, Mélo TJA, Oliveira AD (2016) Efeito dos agentes de compatibilização SBS e SEBS-MA no desempenho de misturas de poliestireno/resíduo de borracha de SBR. Matéria (Rio J.) 21(3):632–646. https://doi.org/10.1590/S1517-707620160003.0061CrossRef

29.

Hirayama D, Nunnenkamp LA, Braga FHG, Saron C (2022) Enhanced mechanical properties of recycled blends acrylonitrile–butadiene–styrene/high–impact polystyrene from waste electrical and electronic equipment using compatibilizers and virgin polymers. J Appl Polym Sci 139(13):51873. https://doi.org/10.1002/app.51873CrossRef

30.

Liu J, Jiang D, Li Z (2022) Annealing-induced high impact toughness of immiscible isotactic polypropylene/poly(acrylonitrile-butadiene-styrene) blend. Polym Adv Technol 33(6):1933–1943. https://doi.org/10.1002/pat.5653CrossRef

31.

Luna CBB, Siqueira DD, Araújo EM, Nascimento EP, Melo JBCA (2022) Evaluation of the SEBS copolymer in the compatibility of PP/ABS blends through mechanical, thermal, thermomechanical properties, and morphology. Polym Adv Technol 33(1):111–124. https://doi.org/10.1002/pat.5495CrossRef

32.

Chen B, Evans JRG (2011) Mechanical properties of polymer-blend nanocomposites with organoclays: Polystyrene/ABS and high impact polystyrene/ABS. J Polym Sci Part B Polym Phys 49(6):443-454. https://doi.org/10.1002/polb.22202

33.

Tang T, Huang B (1994) Interfacial behaviour of compatibilizers in polymer blends. Polymer 35(2):281–285. https://doi.org/10.1016/0032-3861(94)90691-2CrossRef

34.

Ajji A, Utracki LA (1996) Interphase and compatibilization of polymer blends. Polym Eng Sci 36(12):1574–1585. https://doi.org/10.1002/pen.10554CrossRef

35.

Koning C, Duin MV, Pagnoulle C, Jerome R (1998) Strategies for compatibilization of polymer blends. Prog Polym Sci 23(4):707–757. https://doi.org/10.1016/S0079-6700(97)00054-3CrossRef

36.

Sombatsompop N (2002) Extrudate swell and texture of PS, LDPE, ABS, PVC melts and their blends in extrusion capillary flow using a magnetic die. J Appl Polym Sci 86(2):509–517. https://doi.org/10.1002/app.11015CrossRef

37.

Piorkowska E, Argon AS, Cohen RE (1993) Izod impact strength of polystyrene-based blends containing low molecular weight polybutadiene. Polymer 34(21):4435–4444. https://doi.org/10.1016/0032-3861(93)90150-9CrossRef

38.

Bedjaouui K, Krache R, Fernández AM, Guessoum M (2019) The effect of compatibilizer SEBS on the mechanical, morphological and thermal properties of the polystyrene/poly (styrene-co-acrylonitrile) copolymer blends. Mater Res Express 6(10):105334. https://doi.org/10.1088/2053-1591/ab38e7CrossRef

39.

Jaidev K, Biswal M, Mohanty S, Nayak SK (2021) Compatibility effect of r-ABS/r-HIPS/r-PS blend recovered from waste keyboard plastics: evaluation of mechanical, thermal and morphological performance. J Polym Res 28:129. https://doi.org/10.1007/s10965-021-02481-6

40.

Gohatre OK, Biswal M, Mohanty S, Nayak SK (2021) An effective sustainable approach towards recycling and value addition of waste poly(vinyl chloride) and acrylonitrile butadiene styrene (ABS) recovered from electronic waste (e-waste). J Polym Res 28:328. https://doi.org/10.1007/s10965-021-02678-9CrossRef

41.

Ekinci A, Oksuz M, Ates M, Aydin I (2022) Thermal and mechanical properties of polypropylene/post-consumer poly (ethylene terephthalate) blends: bottle-to-bottle recycling. J Polym Res 29:433. https://doi.org/10.1007/s10965-022-03229-6CrossRef

42.

Spontak RJ, Patel NP (2000) Thermoplastic elastomers: fundamentals and applications. Curr Opin Colloid Interface Sci 5(5–6):333–340. https://doi.org/10.1016/S1359-0294(00)00070-4CrossRef

43.

Abreu FOMS, Forte MMC, Liberman SA (2006) Morphology and mechanical properties of polypropylenes/TPEs blends. Polímeros: Ciência e Tecnologia 16(1):71-78. https://doi.org/10.1590/S0104-14282006000100015

44.

Nachtigall BMS, Libio IC, Grassi VG, Pizzol MFD (2012) Toughened polystyrene with improved photoresistance: Effects of the compatibilizers. J Appl Polym Sci 126(1):179–185. https://doi.org/10.1002/app.36546CrossRef

45.

Silva PTV, Luna CBB, Filho EAS, Nascimento EP, Araújo EM (2023) Tailoring polyamide 6 to exhibit super-tough behavior and high thermomechanical stability: The role of AES and EPDM-MA hybridization. J Appl Polym Sci e54470. https://doi.org/10.1002/app.54470

46.

Costa ARM, Lima JC, Santos R, Barreto LS, Hnerique MA, Carvalho LH, Almeida YMD (2021) Rheological, thermal and morphological properties of polyethylene terephthalate/polyamide 6/rice husk ash composites. J Appl Polym Sci 138(36):50916. https://doi.org/10.1002/app.50916CrossRef

47.

Andrade DSC, Canedo EL, Carvalho LH, Barbosa R, Alves TS (2021) Characterization of Poly(Ethylene Terephthalate) by Torque Rheometry. Mater Res 24(2). https://doi.org/10.1590/1980-5373-MR-2020-0238CrossRef

48.

Sousa FM, Costa ARM, Reul LTA, Cavalcanti FB, Carvalho LH, Almeida TG, Canedo EL (2019) Rheological and thermal characterization of PCL/PBAT blends. Polym Bull 76:1573–1593. https://doi.org/10.1007/s00289-018-2428-5CrossRef

49.

Kong Y, Li Y, Hu G, Cao N, Ling Y, Pan D, Shao Q, Guo Z (2018) Effects of polystyrene-b-poly(ethylene/propylene)-b-polystyrene compatibilizer on the recycled polypropylene and recycled high-impact polystyrene blends. Polym Adv Technol 29(8):2344–2351. https://doi.org/10.1002/pat.4346CrossRef

50.

Chen CC, White JL (1993) Compatibilizing agents in polymer blends: interfacial tension, phase morphology and mechanical properties. Polym Eng Sci 33(14):923–930. https://doi.org/10.1002/pen.760331409CrossRef

51.

Morais DDS, França DC, Araújo EM, Carvalho LH, Wellen RMR, Oliveira AD, Mélo TJA (2019) Tayloring PS/PCL blends: characteristics of processing and properties. REM, Int Eng J 72(1):87–95. https://doi.org/10.1590/0370-44672017720137CrossRef

52.

Kets KV, Jacques J, Delva L, Ragaert K (2021) Contribution of compatibilizer backbone to degradation and retained functionality of multiple extruded polypropylene/poly(ethylene terephthalate) blends. J Appl Polym Sci 138(12):50044. https://doi.org/10.1002/app.50044CrossRef

53.

Shao W, Liu L, Wang Y, Hua X, Zhang F, Shi Y (2022) Crystallization, structure, and properties of polypropylene random copolymer (PPR)/high-density polyethylene/polypropylene grafted maleic anhydride((HDPE/PP)-g-MAH) blends. J Polym Res 29:354. https://doi.org/10.1007/s10965-022-03211-2CrossRef

54.

Mello FB, Nachtigall SMB, Salles CA, Amico SC (2018) Compatibilization and mechanical properties of compression-molded polypropylene/high-impact polystyrene blends. Prog Rubber Plast Recycl 34(3):117–127. https://doi.org/10.1177/1477760618798275CrossRef

55.

Coutinho FMB, Costa MPM, Guimarães MJOC, Soares BG (2008) Preparation and characterization of high-impact polystyrene using different types of polybutadiene. J Appl Polym Sci 108(1):406–413. https://doi.org/10.1002/app.27656CrossRef

56.

Jesus LCC, Luz SM, Leão RM, Zattera AJ, Amico SC (2019) Comportamento térmico de compósitos de poliestireno reciclado reforçado com celulose de bagaço de cana. Matéria (Rio J.) 24(3):12421. https://doi.org/10.1590/S1517-707620190003.073CrossRef

57.

Castro LDC, Oliveira AD, Kersch M, Altstadt V, Pessan LA (2016) Effects of mixing protocol on morphology and properties of PA6/ABS blends compatibilized with MMA-MA. J Appl Polym Sci 133(27):43612. https://doi.org/10.1002/app.43612CrossRef

58.

Ferreira LAS, Pessan LA, Júnior EH (1997) Comportamento Mecânico e Termo-Mecânico de Blendas Poliméricas PBT/ABS. Polímeros: Ciência e Tecnologia 7(1):67-72. https://doi.org/10.1590/S0104-14281997000100011

59.

Takemori MT (1979) Towards an understanding of the heat distortion temperature of thermoplastics. Polym Eng Sci 19(15):1104–1109. https://doi.org/10.1002/pen.760191507CrossRef

60.

Chipara M, Lozano K, Chipara D, Delgado C, Padilla V (2022) On a novel approach to the thermogravimetric analysis of polymers: Polystyrene. MRS Commun 12:917–923. https://doi.org/10.1557/s43579-022-00274-6CrossRef

61.

Bermúdez AYL, Salazar R (2008) Synthesis and characterization of the polystyrene -asphaltene graft copolymer by FTIR spectroscopy. CT&F - Cienc Tecn Fut 3(4):157–167CrossRef

62.

Galindo RB, Miranda CC, Urbina BAP, Facio AC, Valdés SS, Padilha JM, Cerda LAG, Perera YA, Fernández OSR (2021) Encapsulation of silver nanoparticles in a polystyrene matrix by miniemulsion polymerization and its antimicrobial activity. ISRN Nanotechnol 186851. https://doi.org/10.5402/2012/186851

63.

Smith BC (2021) The infrared spectra of polymers III: Hydrocarbon polymers. Spectroscopy 36(11):22–25. https://doi.org/10.56530/spectroscopy.mh7872q7

64.

Olongal M, Raphael LR, Raghavan P, Nair MAM, Athiyanathil S (2021) Maleic anhydride grafted acrylonitrile butadiene styrene (ABS)/zinc oxide nanocomposite: an anti-microbial material. J Polym Res 28:284. https://doi.org/10.1007/s10965-021-02632-9CrossRef

65.

Pinto EP, Da Fonseca Filho H, Ramos GQ (2015) O microscópio de força atômica (AFM): importante ferramenta no estudo da morfologia de superfícies na escala nanométrica. Estação científica – UNIFAP 3(2):41-50

66.

Komorowka DC, Grzebyta JN, Gawdzinska K, Mysiukiewicz O, Tomasik M (2021) Polyethylene/polyamide blends made of waste with compatibilizer: processing, morphology rheological and thermo-mechanical behavior. Polymers 13(14):2385. https://doi.org/10.3390/polym13142385CrossRef

67.

Seo J, Kearney LT, Datta S, Toomey MD, Keum JK, Naskar AK (2022) Tailoring compatibilization potential of maleic anhydride-grafted polypropylene by sequential rheochemical processing of polypropylene and polyamide 66 blends. Polym Eng Sci 62(8):2419–2434. https://doi.org/10.1002/pen.26016CrossRef

68.

Sundararaj U, Macosko C (1995) Drop breakup and coalescence in polymer blends: the effects of concentration and compatibilization. Macromolecules 28(8):2647–2657. https://doi.org/10.1021/ma00112a009CrossRef

69.

Bedjaoui K, Navarro R, Krache R, Valentin JL, Calderon RH, Torres AF, Fernandez AM (2022) Toughening of immiscible rPS/SAN blends by SEBS elastomers: properties and morphology. J Mater Sci Chem Eng 10(3):42–62. https://doi.org/10.4236/msce.2022.103004CrossRef

70.

Cavanaugh TJ, Buttle K, Turner JN, Nauman EB (1998) The study of various styrene-butadiene copolymers as compatibilisers in bulk blends of polystyrene/polybutadiene. Polymer 39(18):4191–4197. https://doi.org/10.1016/S0032-3861(98)00058-5CrossRef

71.

Utracki LA (2002) Compatibilization of polymer blends. Can J Chem Eng 80(1008–1016):2002. https://doi.org/10.1002/cjce.5450800601CrossRef

Titel: Efficiency assessment of the SEBS, SEP, and SBS copolymers in the compatibilization of the PS/ABS blend
verfasst von: Válmer Azevedo de Sousa Filho
Mario Alberto de Albuquerque Filho
Marcela Cristine de Alencar Lira
Thiago Cajú Pedrosa
Lindoval Serrano da Fonseca
Suelene Silva Araújo
Mariana Alves Henrique
Eduardo da Silva Barbosa Ferreira
Edcleide Maria Araújo
Carlos Bruno Barreto Luna
Publikationsdatum: 01.11.2023
Verlag: Springer Netherlands
Erschienen in: Journal of Polymer Research / Ausgabe 11/2023
Print ISSN: 1022-9760
Elektronische ISSN: 1572-8935
DOI: https://doi.org/10.1007/s10965-023-03811-6

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 11/2023

Microcrystalline cellulose reinforced polylactic acid composites: comparison of fabrication method and cellulose content

Ambidextrous polyanthracene/poly(ethylene glycol) copolymer for high capacity silicon anode in Li-ion batteries

Robust silicone rubber with high transparency by loading with porous hollow glass microsphere

Synergistic effects of graphite and carbon nanotube hybrid fillers on key properties of epoxidized natural rubber nanocomposites

Tuning the porosity of hypercrosslinked styrene-divinylbenzene copolymers for efficient adsorption of rifampicin from aqueous media

Novel ultra high impact strength light weight transparent polycarbonate laminated composite for aviation and defence

Premium Partner

Marktübersichten