nach oben

Journal of Polymer Research

Erschienen in:

01.11.2023 | Original Paper

Mechanical, barrier, antibacterial and biodegradable properties of carrageenan/natamycin/graphene hybrid bio nanocomposite film for active antimicrobial food packaging applications

verfasst von: M. Vishnuvarthanan, V. Ramji

Erschienen in: Journal of Polymer Research | Ausgabe 11/2023

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

The present research work describes the preparation of natamycin and graphene nanoparticles mixed carrageenan bio nanocomposite film and characterize with respect to food packaging applications. The carrageenan bio nanocomposite films were prepared by solvent casting method with various wt% (0.1, 0.2, 0.3) of graphene and natamycin. The films were characterized using Fourier Transform InfraRed spectroscopy (FTIR) and Scanning Electron Microscopy (SEM). The SEM results showed that the natamycin and graphene were properly distributed in the carrageenan matrix. The addition of graphene increased the surface hydrophobicity and decreased the porosity of films. The maximum opacity and tensile strength of the film was achieved in 0.3 wt% of graphene and the value was 94.58 % and 26.1 MPa respectively. The mixing of graphene significantly reduced the Oxygen Transmission Rate (OTR) and WaterVapour Transmission Rate (WVTR) of the bio nanocomposite film. The carrageenan/natamycin/graphene bio nanocomposite films exhibited a strong antibacterial activity against the foodborne gram-positive (S. aureus) and gram-negative pathogenic (E. coli) bacteria and it also showed a good biodegradable property. Conclusively, the carrageenan/natamycin/graphene bio nanocomposite films led to the suitable packaging material and they have high potential in active food packaging applications.

Vorheriger Artikel Impact of polymer particle purification on the structural and catalytic properties of in situ generated gold nanoparticles

Nächster Artikel The thermal stability and flame retardant effect of Al(OH)3 on NBR containing intumescent flame retardant

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Roy S, Rhim JW (2019) Preparation of carrageenan-based functional nanocomposite films incorporated with melanin nanoparticles. Colloids Surf B Biointerfaces 176:317–324. https://doi.org/10.1016/j.colsurfb.2019.01.023CrossRefPubMed

Pham BTT, Duong THT, Nguyen TT et al (2021) Development of polyvinyl (alcohol)/D-glucose/agar/silver nanoparticles nanocomposite film as potential food packaging material. J Polym Res 28. https://doi.org/10.1007/s10965-021-02761-1

Sabbagh F, Kiarostami K, Khatir NM et al (2021) Effect of zinc content on structural, functional, morphological, and thermal properties of kappa-carrageenan/NaCMC nanocomposites. Polym Test 93. https://doi.org/10.1016/j.polymertesting.2020.106922CrossRef

Covis R, Guegan JP, Jeftić J et al (2016) Structural and rheological properties of kappa (κ)-carrageenans covalently modified with cationic moieties. J Polym Res 23. https://doi.org/10.1007/s10965-016-0971-z

Alves VD, Castelló R, Ferreira AR et al (2011) Barrier properties of carrageenan/pectin biodegradable composite films. Procedia Food Sci 1:240–245. https://doi.org/10.1016/j.profoo.2011.09.038CrossRef

Kanmani P, Rhim JW (2014) Development and characterization of carrageenan/grapefruit seed extract composite films for active packaging. Int J Biol Macromol 68:258–266. https://doi.org/10.1016/j.ijbiomac.2014.05.011CrossRefPubMed

Goh K, Heising JK, Yuan Y et al (2016) Sandwich-architectured poly(lactic acid)-graphene composite food packaging films. ACS Appl Mater Interfaces 8:9994–10004. https://doi.org/10.1021/acsami.6b02498CrossRefPubMed

Geim AK, Novoselov KS (2007) The rise of graphene PROGRESS. Nat Mater 6:183–191CrossRefPubMed

Han Lyn F, Nur Hanani ZA (2022) Graphene-based polymer nanocomposites in food packaging and factors affecting the behaviour of graphene-based materials: a review. J Nanoparticle Res 24. https://doi.org/10.1007/s11051-022-05558-5

10.

Rossa V, Monteiro Ferreira LE, da Costa Vasconcelos S et al (2022) Nanocomposites based on the graphene family for food packaging: historical perspective, preparation methods, and properties. RSC Adv 12:14084–14111. https://doi.org/10.1039/d2ra00912aCrossRefPubMedPubMedCentral

11.

Romero V, Borneo R, Passalacqua N, Aguirre A (2016) Biodegradable films obtained from triticale (x Triticosecale Wittmack) flour activated with natamycin for cheese packaging. Food Packag Shelf Life 10:54–59. https://doi.org/10.1016/j.fpsl.2016.09.003CrossRef

12.

Shin J, Liu X, Chikthimmah N, Lee YS (2016) Polymer surface modification using UV treatment for attachment of natamycin and the potential applications for conventional food cling wrap (LDPE). Appl Surf Sci 386:276–284. https://doi.org/10.1016/j.apsusc.2016.05.158CrossRef

13.

Mo X, Peng X, Liang X et al (2021) Development of antifungal gelatin-based nanocomposite films functionalized with natamycin-loaded zein/casein nanoparticles. Food Hydrocoll 113. https://doi.org/10.1016/j.foodhyd.2020.106506CrossRef

14.

Shen C, Cao Y, Rao J et al (2021) Application of solution blow spinning to rapidly fabricate natamycin-loaded gelatin/zein/polyurethane antimicrobial nanofibers for food packaging. Food Packag Shelf Life 29. https://doi.org/10.1016/j.fpsl.2021.100721

15.

Rhim JW, Wang LF (2014) Preparation and characterization of carrageenan-based nanocomposite films reinforced with clay mineral and silver nanoparticles. Appl Clay Sci 97–98:174–181. https://doi.org/10.1016/j.clay.2014.05.025CrossRef

16.

Pereira L, Amado AM, Critchley AT et al (2009) Identification of selected seaweed polysaccharides (phycocolloids) by vibrational spectroscopy (FTIR-ATR and FT-Raman). Food Hydrocoll 23:1903–1909. https://doi.org/10.1016/j.foodhyd.2008.11.014CrossRef

17.

Wang XH, Song XJ, Zhang DJ et al (2022) Preparation and characterization of natamycin-incorporated agar film and its application on preservation of strawberries. Food Packag Shelf Life 32. https://doi.org/10.1016/j.fpsl.2022.100863CrossRef

18.

Sirisha Nallan Chakravartula S, Lourenço RV, Balestra F et al (2020) Influence of pitanga (Eugenia uniflora L.) leaf extract and/or natamycin on properties of cassava starch/chitosan active films. Food Packag Shelf Life 24:100498. https://doi.org/10.1016/j.fpsl.2020.100498CrossRef

19.

Naderi Bab Anari H, Majdinasab M, Shaghaghian S, Khalesi M (2022) Development of a natamycin-based non-migratory antimicrobial active packaging for extending shelf-life of yogurt drink (Doogh). Food Chem 366. https://doi.org/10.1016/j.foodchem.2021.130606CrossRefPubMed

20.

Wang L, Gang X, Xiao Y et al (2023) Preparation of composite films composed of polyvinyl alcohol, shellac and carboxymethyl chitosan-CuO nanoparticles and their application in food preservation. J Polym Res 30:1–13. https://doi.org/10.1007/s10965-023-03438-7CrossRef

21.

Ollé Resa CP, Jagus RJ, Gerschenson LN (2014) Effect of natamycin, nisin and glycerol on the physicochemical properties, roughness and hydrophobicity of tapioca starch edible films. Mater Sci Eng C 40:281–287. https://doi.org/10.1016/j.msec.2014.04.005CrossRef

22.

Samyn P (2013) Wetting and hydrophobic modification of cellulose surfaces for paper applications. J Mater Sci 48:6455–6498. https://doi.org/10.1007/s10853-013-7519-yCrossRef

23.

Ramji V, Vishnuvarthanan M (2022) Chitosan ternary bio nanocomposite films incorporated with MMT K10 nanoclay and spirulina. Silicon 14:1209–1220. https://doi.org/10.1007/s12633-021-01045-zCrossRef

24.

Mayakrishnan V, Mohamed JK, Selvaraj N et al (2022) Effect of nano-biochar on mechanical, barrier and mulching properties of 3D printed thermoplastic polyurethane film. Polym Bull 80:6725–6747. https://doi.org/10.1007/s00289-022-04380-2CrossRef

25.

Yuan Y, Wang H, Fu Y et al (2022) Sodium alginate/gum arabic/glycerol multicomponent edible films loaded with natamycin: Study on physicochemical, antibacterial, and sweet potatoes preservation properties. Int J Biol Macromol 213:1068–1077. https://doi.org/10.1016/j.ijbiomac.2022.06.040CrossRefPubMed

26.

Valapa RB, Pugazhenthi G, Katiyar V (2015) Effect of graphene content on the properties of poly(lactic acid) nanocomposites. RSC Adv 5:28410–28423. https://doi.org/10.1039/c4ra15669bCrossRef

27.

Castaño J, Guadarrama-Lezama AY, Hernández J et al (2017) Preparation, characterization and antifungal properties of polysaccharide–polysaccharide and polysaccharide–protein films. J Mater Sci 52:353–366. https://doi.org/10.1007/s10853-016-0336-3CrossRef

28.

Roy S, Rhim JW (2021) Fabrication of bioactive binary composite film based on gelatin/chitosan incorporated with cinnamon essential oil and rutin. Colloids Surfaces B Biointerfaces 204. https://doi.org/10.1016/j.colsurfb.2021.111830CrossRefPubMed

29.

Zhou H, Tong H, Lu J et al (2021) Preparation of bio-based cellulose acetate/chitosan composite film with oxygen and water resistant properties. Carbohydr Polym 270. https://doi.org/10.1016/j.carbpol.2021.118381CrossRefPubMed

30.

Rouf TB, Schmidt G, Kokini JL (2018) Correction to: Zein-Laponite nanocomposites with improved mechanical, thermal and barrier properties. J Mater Sci 53:13317. https://doi.org/10.1007/s10853-018-2600-1CrossRef

31.

Montero B, Rico M, Barral L et al (2021) Preparation and characterization of bionanocomposite films based on wheat starch and reinforced with cellulose nanocrystals. Cellulose 28:7781–7793. https://doi.org/10.1007/s10570-021-04017-zCrossRef

32.

Kale RD, Gorade VG (2018) Preparation of acylated microcrystalline cellulose using olive oil and its reinforcing effect on poly(lactic acid) films for packaging application. J Polym Res 25:1–14. https://doi.org/10.1007/s10965-018-1470-1CrossRef

33.

Ramji V, Vishnuvarthanan M (2022) Influence of NiO supported silica nanoparticles on mechanical, barrier, optical and antibacterial properties of polylactic acid (PLA) bio nanocomposite films for food packaging applications. Silicon 14:531–538. https://doi.org/10.1007/s12633-020-00839-xCrossRef

34.

Abdullah ZW (2018) Recent advances and perspectives on starch nanocomposites for packaging applications. J Mater Sci 53:15319–15339. https://doi.org/10.1007/s10853-018-2613-9CrossRef

35.

Shanmugam R, Mayakrishnan V, Kesavan R (2021) Mechanical, barrier, adhesion and antibacterial properties of pullulan / graphene bio nanocomposite coating on spray coated nanocellulose film for food packaging applications. J Polym Environ 30:1749–1757. https://doi.org/10.1007/s10924-021-02311-2CrossRef

Titel: Mechanical, barrier, antibacterial and biodegradable properties of carrageenan/natamycin/graphene hybrid bio nanocomposite film for active antimicrobial food packaging applications
verfasst von: M. Vishnuvarthanan
V. Ramji
Publikationsdatum: 01.11.2023
Verlag: Springer Netherlands
Erschienen in: Journal of Polymer Research / Ausgabe 11/2023
Print ISSN: 1022-9760
Elektronische ISSN: 1572-8935
DOI: https://doi.org/10.1007/s10965-023-03791-7

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 11/2023

Volatile and non-volatile additives for Polymer Solar cells from Fullerene to non-fullerene systems

APDS modified several bisphenol A polyimides with low dielectric constant under high frequency

Preparation and characterization of polysilazane-based thermal protective coating for CFRP

Average properties of the self-condensing vinyl polymerization system of comonomers with any initial size distribution

Increasing the thermal stability of α-diimine nickel (II) catalyst by camphorquinone as a great backbone and investigating the steric effects of this backbone in ethylene polymerization

Novel ultra high impact strength light weight transparent polycarbonate laminated composite for aviation and defence

Premium Partner

Marktübersichten