Top

Journal of Materials Science

Published in:

05-07-2022 | Materials for life sciences

A hybrid coating of polydopamine and nano-hydroxyapatite enhances surface properties of 3D printed poly(lactic-co-glycolic acid) scaffolds

Authors: Weitong Chen, Luke Nichols, Landon Teer, Kailey Clinton, Lauren B. Priddy

Published in: Journal of Materials Science | Issue 27/2022

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

Polydopamine (pDA)-based surface modification is a promising method to enhance the surface conditions of biomaterials and facilitate cell-material interactions. Traditionally, the pDA is coated before anchoring secondary bioactive factors, which requires an extra step and limits the availability of pDA on the surface, impeding the efficacy of pDA itself in enhancing cell function. In this study, for the first time, nano-hydroxyapatite (nHA) particles were immobilized on 3D printed poly(lactic-co-glycolic acid) (PLGA) scaffolds with a single step during dopamine polymerization. Unique micro-/nano-pores were produced during incubation of the PLGA substrate with Tris–HCl. Surprisingly, PLGA controls and pDA demonstrated higher surface roughness than nHA and pDA-nHA groups. The coating processes did not alter the strut width (cross-sectional area from top view). No visible differences in coating thickness were observed among groups. Both nHA and pDA alone increased the hydrophilicity of the PLGA surface, and the hybrid pDA-nHA coating further improved the hydrophilicity. The mechanical properties were not different between groups. Only the hybrid pDA-nHA coating showed increasing cell numbers from day 1 to 3 and day 3 to 5. Cell number on hybrid pDA-nHA scaffolds on day 5 was greatest among experimental groups, while cell number on pDA was the lowest at all timepoints. These results collectively highlight a novel, single-step method of self-polymerized, dopamine-induced nHA deposition for enhancing the surface properties of and cell-material interactions with 3D printed PLGA scaffolds, demonstrating the efficacy of pDA-based hybrid coatings in functionalizing polymer substrates for bone tissue engineering.

Graphical abstract

previous article Alendronate-loaded gelatin microparticles as templating agents for macroporous magnesium phosphate-based bone cements

next article Injectability study and rheological evaluation of Pluronic-derived thermosensitive hydrogels containing mesoporous bioactive glass nanoparticles for bone regeneration

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Available only for authorised users

Guo T, Lim CG, Noshin M et al (2018) 3D printing bioactive PLGA scaffolds using DMSO as a removable solvent. Bioprinting 10:1–8. https://doi.org/10.1016/j.bprint.2018.e00038CrossRef

Babilotte J, Martin B, Guduric V et al (2021) Development and characterization of a PLGA-HA composite material to fabricate 3D-printed scaffolds for bone tissue engineering. Mater Sci Eng C 118:111334. https://doi.org/10.1016/j.msec.2020.111334CrossRef

Nemani SK, Annavarapu RK, Mohammadian B et al (2018) Surface Modification of polymers: methods and applications. Adv Mater Interfaces 5:1801247. https://doi.org/10.1002/admi.201801247CrossRef

Sun X, Xu C, Wu G et al (2017) Poly(lactic-co-glycolic acid): applications and future prospects for periodontal tissue regeneration. Polymers (Basel) 9:189. https://doi.org/10.3390/polym9060189CrossRef

Chen W, Tucker L, Teer L, Priddy LB (2020) Dopamine-assisted nano-hydroxyapatite coating on 3d printed poly ( lactic-co-glycolic acid ) scaffolds. Biomed Sci Instrum 56:939527

Makadia HK, Siegel SJ (2011) Poly lactic-co-glycolic acid (PLGA) as biodegradable controlled drug delivery carrier. Polymers (Basel) 3:1377–1397. https://doi.org/10.3390/polym3031377CrossRef

Zhang X, Xiao Y, Lang M (2013) Synthesis and degradation behavior of miktoarm poly(ε-caprolactone) 2 -b-poly(L-lactone) 2 microspheres. Polym J 45:420–426. https://doi.org/10.1038/pj.2012.166CrossRef

Laurencin CT, Attawia M, Borden MD (1999) Advancements in tissue engineered bone substitutes: current opinion in orthopaedics. Curr Opin Orthop 10:445–451CrossRef

Kofron MD, Griswold A, Kumbar SG et al (2009) The implications of polymer selection in regenerative medicine: a comparison of amorphous and semi-crystalline polymer for tissue regeneration. Adv Funct Mater 19:1351–1359. https://doi.org/10.1002/adfm.200801327CrossRef

10.

Rizzi SC, Heath DJ, Coombes AGA et al (2001) Biodegradable polymer/hydroxyapatite composites: surface analysis and initial attachment of human osteoblasts. J Biomed Mater Res 55:475–486. https://doi.org/10.1002/1097-4636(20010615)55:4%3c475::AID-JBM1039%3e3.0.CO;2-QCrossRef

11.

Chen W, Tucker L, Bennett J et al (2019) Effects of alkali treatment time on nano- hydroxyapatite coating of 3d printed poly (lactic-co-glycolic acid) scaffolds. Bioceramics 31:21–29

12.

Dhert WJA, Klein CPAT, Wolke JGC et al (1991) Student research award in the graduate degree candidate category, 17th annual meeting of the society for biomaterials, scottsdale, AZ may 1–5, 1991. A mechanical investigation of fluorapatite, magnesiumwhitlockite, and hydroxylapatite plasma-sprayed coatings in goats. J Biomed Mater Res 25:1183–1200. https://doi.org/10.1002/jbm.820251002CrossRef

13.

Tian Q, Rivera-Castaneda L, Liu H (2017) Optimization of nano-hydroxyapatite/poly(lactic-co-glycolic acid) coatings on magnesium substrates using one-step electrophoretic deposition. Mater Lett 186:12–16. https://doi.org/10.1016/j.matlet.2016.09.072CrossRef

14.

Zhu J, Tang D, Lu Z et al (2020) Ultrafast bone-like apatite formation on highly porous poly(L-lactic acid)-hydroxyapatite fibres. Mater Sci Eng C 116:111168. https://doi.org/10.1016/j.msec.2020.111168CrossRef

15.

Chien C-Y, Tsai W-B (2013) Poly(dopamine)-assisted immobilization of Arg-Gly-Asp peptides, hydroxyapatite, and bone morphogenic protein-2 on titanium to improve the osteogenesis of bone marrow stem cells. ACS Appl Mater Interfaces. https://doi.org/10.1021/am401071fCrossRef

16.

Lee H, Dellatore SM, Miller WM, Messersmith PB (2007) Mussel-inspired surface chemistry for multifunctional coatings. Science (80- ) 318:426–430. https://doi.org/10.1126/science.1147241

17.

Ryu JH, Messersmith PB, Lee H (2018) Polydopamine surface chemistry: a decade of discovery. ACS Appl Mater Interfaces 10:7523–7540CrossRef

18.

Liu Y, Ai K, Lu L (2014) Polydopamine and its derivative materials: Synthesis and promising applications in energy, environmental, and biomedical fields. Chem Rev 114:5057–5115CrossRef

19.

Yan J, Yang L, Lin M-F et al (2013) Polydopamine spheres as active templates for convenient synthesis of various nanostructures. Small 9:596–603. https://doi.org/10.1002/smll.201201064CrossRef

20.

Ko E, Yang K, Shin J, Cho S-W (2013) Polydopamine-assisted osteoinductive peptide immobilization of polymer scaffolds for enhanced bone regeneration by human adipose-derived stem cells. Biomacromolecules. https://doi.org/10.1021/bm4008343CrossRef

21.

Lee H, Dellatore SM, Miller WM, Messersmith PB (2007) Mussel-inspired surface chemistry for multifunctional coatings. Science 318:426–430. https://doi.org/10.1126/science.1147241CrossRef

22.

Shin YM, Bin LY, Shin H (2011) Time-dependent mussel-inspired functionalization of poly(l-lactide-co-e{open}-caprolactone) substrates for tunable cell behaviors. Colloids Surf B Biointerfaces. https://doi.org/10.1016/j.colsurfb.2011.05.004CrossRef

23.

Kord Forooshani P, Polega E, Thomson K et al (2019) Antibacterial properties of mussel-inspired polydopamine coatings prepared by a simple two-step shaking-assisted method. Front Chem. https://doi.org/10.3389/fchem.2019.00631CrossRef

24.

Liu Y, Xu C, Gu Y et al (2019) Polydopamine-modified poly(L-lactic acid) nanofiber scaffolds immobilized with an osteogenic growth peptide for bone tissue regeneration. RSC Adv 9:11722–11736. https://doi.org/10.1039/c8ra08828dCrossRef

25.

Li Y, Yang W, Li X et al (2015) Improving osteointegration and osteogenesis of three-dimensional porous Ti6Al4V scaffolds by polydopamine-assisted biomimetic hydroxyapatite coating. ACS Appl Mater Interfaces 7:5715–5724. https://doi.org/10.1021/acsami.5b00331CrossRef

26.

Luo R, Tang L, Wang J et al (2013) Improved immobilization of biomolecules to quinone-rich polydopamine for efficient surface functionalization. Colloids Surf B Biointerfaces 106:66–73. https://doi.org/10.1016/j.colsurfb.2013.01.033CrossRef

27.

Ho CC, Ding SJ (2014) Structure, properties and applications of mussel-inspired polydopamine. J Biomed Nanotechnol 10:3063–3084CrossRef

28.

Huang S, Liang N, Hu Y et al (2016) Polydopamine-assisted surface modification for bone biosubstitutes. Biomed Res Int 2016:2389895. https://doi.org/10.1155/2016/2389895CrossRef

29.

Jiang J, Huang Y, Wang Y et al (2017) Mussel-inspired dopamine and carbon nanotube leading to a biocompatible self-rolling conductive hydrogel film. Mater (Basel, Switzerland). https://doi.org/10.3390/ma10080964CrossRef

30.

Wang H, Qin Z, Liu Y et al (2017) Design and preparation of porous polymer particles with polydopamine coating and selective enrichment for biomolecules. RSC Adv 7:45311–45319. https://doi.org/10.1039/c7ra08175hCrossRef

31.

Holten-Andersen N, Mates TE, Toprak MS et al (2009) Metals and the integrity of a biological coating: the cuticle of mussel byssus. Langmuir 25:3323–3326. https://doi.org/10.1021/la8027012CrossRef

32.

Jia L, Han F, Wang H et al (2019) Polydopamine-assisted surface modification for orthopaedic implants. J Orthop Transl 17:82–95. https://doi.org/10.1016/j.jot.2019.04.001CrossRef

33.

Ryu J, Ku SH, Lee H, Park CB (2010) Mussel-inspired polydopamine coating as a universal route to hydroxyapatite crystallization. Adv Funct Mater 20:2132–2139. https://doi.org/10.1002/adfm.200902347CrossRef

34.

Xu Y, Li H, Wu J et al (2018) Polydopamine-induced hydroxyapatite coating facilitates hydroxyapatite/polyamide 66 implant osteogenesis: An in vitro and in vivo evaluation. Int J Nanomed 13:8179–8193. https://doi.org/10.2147/IJN.S181137CrossRef

35.

Zhou Z, Zheng B, Gu Y et al (2020) New approach for improving anticorrosion and biocompatibility of magnesium alloys via polydopamine intermediate layer-induced hydroxyapatite coating. Surf Interfaces 19:100501. https://doi.org/10.1016/j.surfin.2020.100501CrossRef

36.

Zhang M, Zhang J, Ban L et al (2020) Polydopamine regulated hydroxyapatite microspheres grown in the three-dimensional honeycomb-like mollusk shell-derived organic template for osteogenesis. Biofabrication. https://doi.org/10.1088/1758-5090/ab8f20CrossRef

37.

Wang Z, Li P, Jiang Y et al (2017) Mussel-inspired nanostructured coatings assembled using polydopamine nanoparticles and hydroxyapatite nanorods for biomedical applications. Biosurface Biotribol 3:1–10. https://doi.org/10.1016/J.BSBT.2017.01.001CrossRef

38.

Jo S, Kang SM, Park SA et al (2013) Enhanced adhesion of preosteoblasts inside 3DPCL scaffolds by polydopamine coating and mineralization. Macromol Biosci 13:1389–1395. https://doi.org/10.1002/mabi.201300203CrossRef

39.

Kasemset S, Lee A, Miller DJ et al (2012) Effect of polydopamine deposition conditions on fouling resistance, physical properties, and permeation properties of reverse osmosis membranes in oil/water separation. J Memb Sci 425–426:208–216. https://doi.org/10.1016/j.memsci.2012.08.049CrossRef

40.

Huang Z, Wu Z, Ma B et al (2018) Enhanced in vitro biocompatibility and osteogenesis of titanium substrates immobilized with dopamine-assisted superparamagnetic Fe3O4 nanoparticles for hBMSCs. R Soc Open Sci. https://doi.org/10.1098/rsos.172033CrossRef

41.

Chen S, Chen Y, Lei Y, Yin Y (2009) Novel strategy in enhancing stability and corrosion resistance for hydrophobic functional films on copper surfaces. Electrochem Commun 11:1675–1679. https://doi.org/10.1016/j.elecom.2009.06.021CrossRef

42.

Kang K, Choi IS, Nam Y (2011) A biofunctionalization scheme for neural interfaces using polydopamine polymer. Biomaterials 32:6374–6380. https://doi.org/10.1016/j.biomaterials.2011.05.028CrossRef

43.

Sheng WB, Li W, Zhang GX et al (2015) Study on the UV-shielding and controlled-release properties of a polydopamine coating for avermectin. New J Chem 39:2752–2757. https://doi.org/10.1039/c4nj01744gCrossRef

44.

Chien C-Y, Liu T-Y, Kuo W-H et al (2013) Dopamine-assisted immobilization of hydroxyapatite nanoparticles and RGD peptides to improve the osteoconductivity of titanium. J Biomed Mater Res Part A 101A:740–747. https://doi.org/10.1002/jbm.a.34376CrossRef

45.

Yu X, Walsh J, Wei M (2013) Covalent immobilization of collagen on titanium through polydopamine coating to improve cellular performances of MC3T3-E1 cells. RSC Adv 4:7185–7192. https://doi.org/10.1039/C3RA44137GCrossRef

46.

Gao X, Song J, Ji P et al (2016) Polydopamine-templated hydroxyapatite reinforced polycaprolactone composite nanofibers with enhanced cytocompatibility and osteogenesis for bone tissue engineering. ACS Appl Mater Interfaces 8:3499–3515. https://doi.org/10.1021/acsami.5b12413CrossRef

47.

Lee JS, Yi JK, An SY, Heo JS (2014) Increased osteogenic differentiation of periodontal ligament stem cells on polydopamine film occurs via activation of integrin and PI3K signaling pathways. Cell Physiol Biochem 34:1824–1834. https://doi.org/10.1159/000366381CrossRef

48.

Lee DJ, Tseng HC, Wong SW et al (2015) Dopaminergic effects on in vitro osteogenesis. Bone Res. https://doi.org/10.1038/boneres.2015.20CrossRef

49.

Wang CX, Ge XY, Wang MY et al (2020) Dopamine D1 receptor-mediated activation of the ERK signaling pathway is involved in the osteogenic differentiation of bone mesenchymal stem cells. Stem Cell Res Ther 11:12. https://doi.org/10.1186/s13287-019-1529-xCrossRef

50.

Wang L, Han L, Xue P et al (2021) Dopamine suppresses osteoclast differentiation via cAMP/PKA/CREB pathway. Cell Signal 78:109847CrossRef

51.

Zhou J, Guo X, Zheng Q et al (2017) Improving osteogenesis of three-dimensional porous scaffold based on mineralized recombinant human-like collagen via mussel-inspired polydopamine and effective immobilization of BMP-2-derived peptide. Colloids Surf B Biointerfaces 152:124–132. https://doi.org/10.1016/j.colsurfb.2016.12.041CrossRef

52.

Kaushik N, Nguyen LN, Kim JH et al (2020) Strategies for using polydopamine to induce biomineralization of hydroxyapatite on implant materials for bone tissue engineering. Int J Mol Sci 21:1–19CrossRef

53.

Park J, Lee SJ, Jung TG et al (2021) Surface modification of a three-dimensional polycaprolactone scaffold by polydopamine, biomineralization, and BMP-2 immobilization for potential bone tissue applications. Colloids Surf B Biointerfaces 199:111528. https://doi.org/10.1016/j.colsurfb.2020.111528CrossRef

54.

Chen W, Nichols L, Brinkley F et al (2020) Alkali treatment facilitates functional nano-hydroxyapatite coating of 3D printed polylactic acid scaffolds. Mater Sci Eng C. https://doi.org/10.1016/j.msec.2020.111686CrossRef

55.

Alippilakkotte S, Sreejith L (2018) Benign route for the modification and characterization of poly(lactic acid) (PLA) scaffolds for medicinal application. J Appl Polym Sci. https://doi.org/10.1002/app.46056CrossRef

56.

Hejazi I, Seyfi J, Hejazi E et al (2015) Investigating the role of surface micro/nano structure in cell adhesion behavior of superhydrophobic polypropylene/nanosilica surfaces. Colloids Surfaces B Biointerfaces 127:233–240. https://doi.org/10.1016/j.colsurfb.2015.01.054CrossRef

57.

Li C, Zhang J, Han J, Yao B (2021) A numerical solution to the effects of surface roughness on water–coal contact angle. Sci Rep 11:459. https://doi.org/10.1038/s41598-020-80729-9CrossRef

58.

Latifi SM, Shankar R, Donahue HJ (2020) Polydopamine coating on titanium affects osteoblastic differentiation to a greater degree than does surface roughness. Adv Mater Phys Chem 10:339–349. https://doi.org/10.4236/ampc.2020.1012027CrossRef

59.

Ito S (2003) A chemist’s view of melanogenesis. Pigment Cell Res 16:230–236. https://doi.org/10.1034/J.1600-0749.2003.00037.XCrossRef

60.

Ball V (2018) Polydopamine films and particles with catalytic activity. Catal Today 301:196–203. https://doi.org/10.1016/j.cattod.2017.01.031CrossRef

61.

Liebscher J, Mrówczyński R, Scheidt HA et al (2013) Structure of polydopamine: a never-ending story? Langmuir 29:10539–10548. https://doi.org/10.1021/la4020288CrossRef

62.

Hong S, Na YS, Choi S et al (2012) Non-covalent self-assembly and covalent polymerization co-contribute to polydopamine formation. Adv Funct Mater 22:4711–4717. https://doi.org/10.1002/adfm.201201156CrossRef

63.

Li M, Liu X, Xu Z et al (2016) Dopamine modified organic-inorganic hybrid coating for antimicrobial and osteogenesis. ACS Appl Mater Interfaces 8:33972–33981. https://doi.org/10.1021/acsami.6b09457CrossRef

64.

Lim C, Huang J, Kim S et al (2016) Nanomechanics of poly(catecholamine) coatings in aqueous solutions. Angew Chemie Int Ed 55:3342–3346. https://doi.org/10.1002/anie.201510319CrossRef

65.

Della Vecchia NF, Luchini A, Napolitano A et al (2014) Tris buffer modulates polydopamine growth, aggregation, and paramagnetic properties. Langmuir 30:9811–9818. https://doi.org/10.1021/la501560zCrossRef

66.

Lakshminarayanan R, Madhavi S, Sim CPC (2018) Oxidative polymerization of dopamine: a high-definition multifunctional coatings for electrospun nanofibers - an overview. In: Dopamine - Health and Disease

67.

Chen L, Shao L, Wang F et al (2019) Enhancement in sustained release of antimicrobial peptide and BMP-2 from degradable three dimensional-printed PLGA scaffold for bone regeneration. RSC Adv 9:10494–10507. https://doi.org/10.1039/c8ra08788aCrossRef

68.

Xu Z, Wang N, Liu P et al (2019) Poly(dopamine) coating on 3D-printed poly-lactic-co-glycolic acid/β-tricalcium phosphate scaffolds for bone tissue engineering. Molecules. https://doi.org/10.3390/molecules24234397CrossRef

69.

Seo CH, Furukawa K, Montagne K et al (2011) The effect of substrate microtopography on focal adhesion maturation and actin organization via the RhoA/ROCK pathway. Biomaterials 32:9568–9575. https://doi.org/10.1016/j.biomaterials.2011.08.077CrossRef

70.

Lu J, Rao MP, MacDonald NC et al (2008) Improved endothelial cell adhesion and proliferation on patterned titanium surfaces with rationally designed, micrometer to nanometer features. Acta Biomater 4:192–201. https://doi.org/10.1016/j.actbio.2007.07.008CrossRef

71.

M N, F E, S M, A K, (2012) Engineering microscale topographies to control the cell-substrate interface. Biomaterials 33:5230–5246. https://doi.org/10.1016/J.BIOMATERIALS.2012.03.079CrossRef

72.

Wan T, Li L, Guo M et al (2019) Immobilization via polydopamine of dual growth factors on polyetheretherketone: improvement of cell adhesion, proliferation, and osteo-differentiation. J Mater Sci 54:11179–11196. https://doi.org/10.1007/s10853-018-03264-zCrossRef

73.

Tsai W-B, Chen W-T, Chien H-W et al (2011) Poly(dopamine) coating of scaffolds for articular cartilage tissue engineering. Acta Biomater 7:4187–4194. https://doi.org/10.1016/j.actbio.2011.07.024CrossRef

74.

Ku SH, Ryu J, Hong SK et al (2010) General functionalization route for cell adhesion on non-wetting surfaces. Biomaterials 31:2535–2541. https://doi.org/10.1016/j.biomaterials.2009.12.020CrossRef

75.

Chien H-W, Kuo W-H, Wang M-J et al (2012) Tunable micropatterned substrates based on poly(dopamine) deposition via microcontact printing. Langmuir 28:5775–5782. https://doi.org/10.1021/la300147pCrossRef

76.

Alas GR, Agarwal R, Collard DM, García AJ (2017) Peptide-functionalized poly[oligo(ethylene glycol) methacrylate] brushes on dopamine-coated stainless steel for controlled cell adhesion. Acta Biomater 59:108–116. https://doi.org/10.1016/j.actbio.2017.06.033CrossRef

77.

Wu C, Zhang Y, Zhou Y et al (2011) A comparative study of mesoporous glass/silk and non-mesoporous glass/silk scaffolds: Physiochemistry and in vivo osteogenesis. Acta Biomater 7:2229–2236. https://doi.org/10.1016/j.actbio.2010.12.019CrossRef

78.

Liu Z, Qu S, Zheng X et al (2014) Effect of polydopamine on the biomimetic mineralization of mussel-inspired calcium phosphate cement in vitro. Mater Sci Eng C 44:44–51. https://doi.org/10.1016/j.msec.2014.07.063CrossRef

79.

Kao CT, Lin CC, Chen YW et al (2015) Poly(dopamine) coating of 3D printed poly(lactic acid) scaffolds for bone tissue engineering. Mater Sci Eng C 56:165–173. https://doi.org/10.1016/j.msec.2015.06.028CrossRef

80.

Deng Y, Yang WZ, Shi D et al (2019) Bioinspired and osteopromotive polydopamine nanoparticle-incorporated fibrous membranes for robust bone regeneration. NPG Asia Mater. https://doi.org/10.1038/s41427-019-0139-5CrossRef

81.

Wang X, Jiang M, Zhou Z et al (2017) 3D printing of polymer matrix composites: A review and prospective. Compos Part B Eng 110:442–458. https://doi.org/10.1016/j.compositesb.2016.11.034CrossRef

Title: A hybrid coating of polydopamine and nano-hydroxyapatite enhances surface properties of 3D printed poly(lactic-co-glycolic acid) scaffolds
Authors: Weitong Chen
Luke Nichols
Landon Teer
Kailey Clinton
Lauren B. Priddy
Publication date: 05-07-2022
Publisher: Springer US
Published in: Journal of Materials Science / Issue 27/2022
Print ISSN: 0022-2461
Electronic ISSN: 1573-4803
DOI: https://doi.org/10.1007/s10853-022-07442-y

Springer Professional

Abstract

Graphical abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 27/2022

Small-angle X-ray scattering performances of single crystal and polycrystalline diamond windows in a heated environment

Synthesis, properties, and applications of MBenes (two-dimensional metal borides) as emerging 2D materials: a review

Significant enhancement of surface area and structural distortion of carbon nitride by recrystallization method

Nanoarchitectonics of (110) directed polyethylene glycol stabilized cerium nanoparticles for UV filtering applications

Injectability study and rheological evaluation of Pluronic-derived thermosensitive hydrogels containing mesoporous bioactive glass nanoparticles for bone regeneration

Effect of chromium content on precipitation in Cu–Cr–Zr alloys

Premium Partners