Top

Cluster Computing

Published in:

22-11-2017

A modeling and optimization method for heterogeneous objects based on complex networks theory

Authors: Denghui Zhang, Yiqi Zhou, Yang Guo

Published in: Cluster Computing | Special Issue 2/2019

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

Heterogeneous objects (HEO) which refer to product models with spatially different material compositions or structures have attracted extensive attention from different disciplines due to emerging techniques in design and manufacturing in the last decade. The recent additive manufacturing technologies have bridges the gap between the design and manufacture for HEO. The models are the core for additive manufacturing, while designing heterogeneous objects is still a complex task. In this paper, a novel HEO modeling method based on complex networks theory is first proposed. It models the hollowing Voronoi cell as nodes and force relationship among them as edges. The nodes are weighted by the stress distribution in the mode. The force-directed algorithm is applied to construct the initial porous model. A mixed genetic algorithm is then used to accurately adjust the count and distribution of porous structures, which is necessary to reduce consumption and printing costs. The volume minimized HEO model is archived finally.

previous article Design of the linear controller of a class of time-delay chaos

next article HSBCS framework based performance detection for DS-UWB Systems

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Wirtschaft"

Online-Abonnement

Mit Springer Professional "Wirtschaft" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 340 Zeitschriften

aus folgenden Fachgebieten:

Bauwesen + Immobilien
Business IT + Informatik
Finance + Banking
Management + Führung
Marketing + Vertrieb
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Gou, M., Qu, X., Zhu, W., Xiang, M., Yang, J., Zhang, K., Wei, Y., Chen, S.: Bio-inspired detoxification using 3D-printed hydrogel nanocomposites. Nat. Commun. 5, 3774 (2014). https://doi.org/10.1038/ncomms4774

Castro, N.J., Patel, R., Zhang, L.G.: Design of a novel 3D printed bioactive nanocomposite scaffold for improved osteochondral regeneration. Cell. Mol. Bioeng. 8, 416–432 (2015). https://doi.org/10.1007/s12195-015-0389-4

Compton, B.G., Lewis, J.A.: 3D-printing of lightweight cellular composites. Adv. Mater. 26, 5930–5935 (2014). https://doi.org/10.1002/adma.201401804

Shi, J., Zhu, L., Li, Z., Yang, J., Wang, X.: A design and fabrication method for a heterogeneous model of 3D bio-printing. IEEE Access 5, 5347–5353 (2017). https://doi.org/10.1109/ACCESS.2017.2692248

Gibson, I., Rosen, D.W., Stucker, B.: Design for additive manufacturing. In: Gibson, I., Rosen, D.W., Stucker, B. (eds.) Additive Manufacturing Technologies, pp. 299–332. Springer, New York (2010)

Conde-Rodríguez, F., Torres, J.C., García-Fernández, Á., Feito-Higueruela, F.R.: A comprehensive framework for modeling heterogeneous objects. Vis. Comput. 33, 1–15 (2017). https://doi.org/10.1007/s00371-015-1149-0

Kou, X.Y., Tan, S.T.: Heterogeneous object modeling: a review. Comput.-Aided Des. 39, 284–301 (2007). https://doi.org/10.1016/j.cad.2006.12.007

Wang, W., Wang, T.Y., Yang, Z., Liu, L., Tong, X., Tong, W., Deng, J., Chen, F., Liu, X.: Cost-effective printing of 3D objects with skin-frame structures. ACM Trans. Graph. 32(177), 1–177 (2013). https://doi.org/10.1145/2508363.2508382

Lu, L., Sharf, A., Zhao, H., Wei, Y., Fan, Q., Chen, X., Savoye, Y., Tu, C., Cohen-Or, D., Chen, B.: Build-to-last: strength to weight 3D printed objects. ACM Trans. Graph. 33, 97 (2014). https://doi.org/10.1145/2601097.2601168

10.

Stava, O., Vanek, J., Benes, B., Carr, N., Měch, R.: Stress relief: improving structural strength of 3D printable objects. ACM Trans. Graph. TOG 31, 48 (2012)

11.

Li, D., Dai, N., Jiang, X., Chen, X.: Interior structural optimization based on the density-variable shape modeling of 3D printed objects. Int. J. Adv. Manuf. Technol. 83, 1627–1635 (2016)

12.

Sá, A.M., Mello, V.M., Rodriguez Echavarria, K., Covill, D.: Adaptive voids: primal and dual adaptive cellular structures for additive manufacturing. Vis. Comput. 31, 799–808 (2015)

13.

Wang, D., Song, C., Barabási, A.-L.: Quantifying long-term scientific impact. Science 342, 127–132 (2013)

14.

Knight, S., Nguyen, H.X., Falkner, N., Bowden, R., Roughan, M.: The internet topology zoo. IEEE J. Sel. Areas Commun. 29, 1765–1775 (2011)

15.

Pagani, G.A., Aiello, M.: The power grid as a complex network: a survey. Phys. Stat. Mech. Appl. 392, 2688–2700 (2013). https://doi.org/10.1016/j.physa.2013.01.023

16.

Zhao, Z., Zhao, L.Z.: Small-world phenomenon: toward an analytical model for data exchange in product lifecycle management. Int. J. Intern. Manuf. Serv. 1, 213–230 (2008). https://doi.org/10.1504/IJIMS.2008.021195

17.

Michailidis, N., Smyrnaios, E., Maliaris, G., Stergioudi, F., Tsouknidas, A.: Experimental and computational investigation of porous materials under mechanical loads. In: ResearchGate (2012)

18.

Fang, Q., Zhang, J., Zhang, Y., Wu, H., Gong, Z.: A 3D mesoscopic model for the closed-cell metallic foams subjected to static and dynamic loadings. Int. J. Impact Eng. 82, 103–112 (2015)

19.

Gan, Y.X., Chen, C., Shen, Y.P.: Three-dimensional modeling of the mechanical property of linearly elastic open cell foams. Int. J. Solids Struct. 42, 6628–6642 (2005). https://doi.org/10.1016/j.ijsolstr.2005.03.002

20.

Kou, X.Y., Tan, S.T.: A simple and effective geometric representation for irregular porous structure modeling. Comput.-Aided Des. 42, 930–941 (2010)

21.

Wei, X., Zhang, Y., Hughes, T.J., Scott, M.A.: Truncated hierarchical Catmull–Clark subdivision with local refinement. Comput. Methods Appl. Mech. Eng. 291, 1–20 (2015)

22.

Watts, D.J., Strogatz, S.H.: Collective dynamics of "small-world" networks. Nature 393, 440–442 (1998). https://doi.org/10.1038/30918

23.

Newman, M.E.J., Watts, D.J.: Renormalization group analysis of the small-world network model. Phys. Lett. A. 263, 341–346 (1999). https://doi.org/10.1016/S0375-9601(99)00757-4

24.

Barabási, A.-L., Albert, R.: Emergence of scaling in random networks. Science 286, 509–512 (1999)

25.

Song, C., Havlin, S., Makse, H.A.: Self-similarity of complex networks. Nature 433, 392–395 (2005). https://doi.org/10.1038/nature03248

26.

Fruchterman, T.M.J., Reingold, E.M.: Graph drawing by force-directed placement. Softw. Pract. Exp. 21, 1129–1164 (1991). https://doi.org/10.1002/spe.4380211102

27.

Loop, C.: Smooth subdivision surfaces based on triangles (1987)

28.

Geuzaine, C., Remacle, J.-F.: Gmsh: A 3-D finite element mesh generator with built-in pre- and post-processing facilities. Int. J. Numer. Methods Eng. 79, 1309–1331 (2009). https://doi.org/10.1002/nme.2579

29.

Cimrman, R.: SfePy - Write Your Own FE Application. ArXiv14046391 Cs (2014)

30.

Zuo, Z.H., Xie, Y.M.: A simple and compact Python code for complex 3D topology optimization. Adv. Eng. Softw. 85, 1–11 (2015). https://doi.org/10.1016/j.advengsoft.2015.02.006

31.

Yang, Z., Shen, J.: Product structure evolutionary design method based on IGA and 3D printing. In: Proceedings Seventh International Symposium on Computational Intelligence and Design. pp. 63–66 (2015)

Title: A modeling and optimization method for heterogeneous objects based on complex networks theory
Authors: Denghui Zhang
Yiqi Zhou
Yang Guo
Publication date: 22-11-2017
Publisher: Springer US
Published in: Cluster Computing / Issue Special Issue 2/2019
Print ISSN: 1386-7857
Electronic ISSN: 1573-7543
DOI: https://doi.org/10.1007/s10586-017-1378-2

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Springer Professional "Wirtschaft"

Other articles of this Special Issue 2/2019

Fault diagnosis of neural network classified signal fractal feature based on SVM

Encrypted network behaviors identification based on dynamic time warping and k-nearest neighbor

An intelligent data aware and energy censoring scheme for wireless sensor networks

Evaluation system construction of health policy based on system dynamics and complex network

Local weighted regression statistical analysis based mathematical education evaluation

An improved routing algorithm for advanced metering infrastructure in smart grid

Premium Partner