Skip to main content
Disciplines
Automotive Business IT + Informatics Construction + Real Estate Electrical Engineering + Electronics Energy + Sustainability Insurance + Risk Finance + Banking Management + Leadership Marketing + Sales Mechanical Engineering + Materials
Events
DE
EN
Books
Journals
Topic Page
Marketing
Start single access now
Access for companies
EXTENDED SEARCH
Log in
Top
The International Journal of Advanced Manufacturing Technology
Published in: The International Journal of Advanced Manufacturing Technology 5-8/2019

20-07-2019 | ORIGINAL ARTICLE

A part deformation control method via active pre-deformation based on online monitoring data

Authors: Xiaozhong Hao, Yingguang Li, Mengqiu Li, Changqing Liu

Published in: The International Journal of Advanced Manufacturing Technology | Issue 5-8/2019

Log in

Activate our intelligent search to find suitable subject content or patents.

search-config
loading …

Abstract

Pre-deformation of the workpiece in the elastic range is an effective deformation control method, as the machining deformation can be balanced by the pre-deformation. Different from the traditional pre-deformation control method based on experience or inaccurate prediction before machining, an innovative idea of online active pre-deformation control based on deformation monitoring data is proposed in this paper. The deformation monitoring data are used to analyze the workpiece state and predict the deformation of the next layer based on a cubic spline curve fitting approach, and then Kalman filter algorithm is used to control the error between the prediction deformation and the actual deformation so as to ensure the pre-deformation control accuracy. A real aircraft structural part is used to validate the proposed method, and the results show that the part deformation can be significantly reduced.
previous article Selective laser melting processing of 316L stainless steel: effect of microstructural differences along building direction on corrosion behavior
next article Investigations on the microstructure and mechanical properties of laser welded dissimilar galvanized steel–aluminum joints

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

inform now
Literature
1.
Denkena B, Boehnke D, León LD (2008) Machining induced residual stress in structural aluminum parts. Prod Eng 2(3):247–253CrossRef
2.
Jr MCS, Machado AR, Sales WF, Barrozo MAS, Ezugwu EO (2016) Machining of aluminum alloys: a review. Int J Adv Manuf Technol 86(9-12):3067–3080CrossRef
3.
Masoudi S, Amini S, Saeidi E (2015) Effect of machining-induced residual stress on the distortion of thin-walled parts. Int J Adv Manuf Technol 76(1):597–608CrossRef
4.
Bowden DM, Halley JE (2001) Aluminium reliability improvement program-final report 60606. The Boeing Company, Chicago
5.
Zhang G, Yu C, Shi RC, An L (2003) Experimental study on the milling of thin parts of titanium alloy (TC4). J Mater Process Technol 138(1):489–493
6.
Cerutti X, Mocellin K (2014) Prediction of post-machining distortion due to residual stresses using FEM and a massive removal approach. Key Eng Mater 611-612(1):1159–1165CrossRef
7.
Richter-Trummer V, Koch D, Witte A, Santos JFD, Castro PMSTD (2013) Methodology for prediction of distortion of workpieces manufactured by high speed machining based on an accurate through-the-thickness residual stress determination. Int J Adv Manuf Technol 68(9):2271–2281CrossRef
8.
Li JG, Wang SQ (2017) Distortion caused by residual stresses in machining aeronautical aluminum alloy parts: recent advances. Int J Adv Manuf Technol 89(1-4):997–1012CrossRef
9.
Denkena (2008) Milling induced residual stresses in structural parts out of forged aluminium alloys. Int J Mach Mach Mater 4(4):335–344
10.
Rai JK, Xirouchakis P (2008) Finite element method based machining simulation environment for analyzing part errors induced during milling of thin-walled components. Int J Mach Tool Manu 48(6):629–643CrossRef
11.
Huang X, Sun J, Li J (2015) Finite element simulation and experimental investigation on the residual stress-related monolithic component deformation. Int J Adv Manuf Technol 77(5):1035–1041CrossRef
12.
Lin Y, Luo Y, Tang L (2012) Research on machining deformation control methodology for thin-wall arc shaped frame. Mach Des Manuf 2:107–109 (in Chinese)
13.
Llanos I, Beristain A, Lanzagorta J L, Matzat H (2018) Case Study 2.3: Distortions in Aeronautical Structural Parts
14.
He ZY, Ren B (2010) Study on deformation of sheet metal parts during machining process. Equip Manuf Technol 4:101–103
15.
Cerutti X, Mocellin K (2016) Influence of the machining sequence on the residual stress redistribution and machining quality: analysis and improvement using numerical simulations. Int J Adv Manuf Technol 83(1-4):489–503CrossRef
16.
Li Y, Liu C, Hao X, James XG, Maropoulos PG (2015) Responsive fixture design using dynamic product inspection and monitoring technologies for the precision machining of large-scale aerospace parts. CIRP Ann Manuf Technol 64(1):173–176CrossRef
17.
Hao X, Li Y, Chen G, Liu C (2018) 6+ X locating principle based on dynamic mass centers of structural parts machined by responsive fixtures. Int J Mach Tools Manuf 125:112–122CrossRef
18.
Hao X, Li Y, Zhao Z, Liu C (2019) Dynamic machining process planning incorporating in-process workpiece deformation data for large-size aircraft structural parts. Int J Comput Integr Manuf 32(2):136–147CrossRef
19.
Chatelain JF, Lalonde JF, Tahan AS (2012) Effect of residual stresses embedded within workpieces on the distortion of parts after machining. Int J Mech 6:43–51
Metadata
Title
A part deformation control method via active pre-deformation based on online monitoring data
Authors
Xiaozhong Hao
Yingguang Li
Mengqiu Li
Changqing Liu
Publication date
20-07-2019
Publisher
Springer London
Published in
The International Journal of Advanced Manufacturing Technology / Issue 5-8/2019
Print ISSN: 0268-3768
Electronic ISSN: 1433-3015
DOI
https://doi.org/10.1007/s00170-019-04127-w

Other articles of this Issue 5-8/2019

The International Journal of Advanced Manufacturing Technology 5-8/2019 Go to the issue

ORIGINAL ARTICLE

EDM μ-drilling in Ti-6Al-7Nb: experimental investigation and optimization using NSGA-II

ORIGINAL ARTICLE

Effects of machining conditions on the hole wall delamination in both conventional and ultrasonic-assisted CFRP drilling

ORIGINAL ARTICLE

Ultrasonic cavitation and vibration hybrid-assisted micro-drilling of stainless steel

ORIGINAL ARTICLE

Parameter analysis of thermal behavior during laser melting of Ti-6Al-4V alloy powder

ORIGINAL ARTICLE

A novel method to reduce the distortion of ridged rectangular tube in H-typed rotary draw bending

ORIGINAL ARTICLE

Pulsed Nd:YAG laser spot welding of an AZ31 magnesium alloy

Premium Partners

    Image Credits