Top

Published in:

2023 | OriginalPaper | Chapter

A Review on Automotive Tires Significant Characteristic Identification for General Consumers

Authors : Ahmad Noor Syukri Zainal Abidin, Arief Hakimi Azmi, Khairil Anwar Abu Kassim, Ahmad Shahir Jamaludin, Mohd Nizar Mhd Razali

Published in: Proceedings of the 2nd Energy Security and Chemical Engineering Congress

Publisher: Springer Nature Singapore

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

A tire serves various types of services and distance overs its lifespan. Moreover, for the safety and comfort of vehicle occupants, tire performance is critical. An assessment of literatures on tire-related properties that contribute to better safety performance was conducted in this study. The review elaborates on the most discussed topics from the overall reviewed articles. This study highlights the significant characteristics that be further implemented in tires for specific situations or general consumers. It was determined that tire wear is resulted from several factors. Increasing slip angles cause higher abrasion and temperature on tire surface. Modelling of wear rate can be done realistically with computation. From the review, it is also known that knowledge of tire-pavement and/or ice interactions behavior is improving. Semi-empirical methods in simulation of tire and terrain interactions are a promising candidate for use in multi-body dynamic software (MBS) simulation and vehicle simulations. Thermal aging in rubber tires will result in lower tensile strength. Production of tire wear particles increase 2–3 fold with abrasion from increased slip angles. Carbon back type N220 possess the best tensile, tear, and conductivity qualities. Overall, not much information was able to be obtained with regards to types of tires. Nonetheless research on tire safety performance should be extended so that each of tire component can be continuously improved to enhance tire safety criteria, particularly among the less discussed areas, such as commercial vehicle tires.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

previous chapter Covid-19 Embedded with Aerosol Particles Travel Simulation Inside a Mosque

next chapter Evaluation of Palm Oil Leaves Extracts as a Potential Environment Friendly Corrosion Inhibitor for Metals

Cho JR, Choi JH, Kim YS (2011) Abrasive wear amount estimate for 3D patterned tire utilizing frictional dynamic rolling analysis. Tribol Int 44(7–8):850–858. https://doi.org/10.1016/J.TRIBOINT.2011.02.007CrossRef

Chang XD, Huang HB, Jiao RN, Liu JP (2020) Experimental investigation on the characteristics of tire wear particles under different non-vehicle operating parameters. Tribol Int 150:106354. https://doi.org/10.1016/J.TRIBOINT.2020.106354

Grosch KA, Schallamach A (1961) Tyre wear at controlled slip. Wear 4(5):356–371. https://doi.org/10.1016/0043-1648(61)90003-5CrossRef

Denier van der Gon HAC, Gerlofs-Nijland ME, Gehrig R, Gustafsson M, Janssen N, Harrison RM, Hulskotte J, Johansson C, Jozwicka M, Keuken M, Krijgsheld K, Ntziachristos L, Riediker M, Cassee FR (2012) The policy relevance of wear emissions from road transport, now and in the future—an international workshop report and consensus statement. J Air Waste Manag Assoc 63(2):136–149CrossRef

Huang M, Guibert M, Thévenet J, Fayolle C, Chaussée T, Guy L, Vanel L, Loubet J-L, Sotta P (2018) A new test method to simulate low-severity wear conditions experienced by rubber tire materials. Wear 410–411:72–82. https://doi.org/10.1016/J.WEAR.2018.06.004CrossRef

Holmes T, Lees G, Williams AR (1972) A combined approach to the optimisation of tyre and pavement interaction. Wear 20(3):241–276. https://doi.org/10.1016/0043-1648(72)90408-5CrossRef

Mané Z, Loubet J-L, Guerret C, Guy L, Sanseau O, Odoni L, Vanel L, Long DR, Sotta P (2013) A new rotary tribometer to study the wear of reinforced rubber materials. Wear 306(1–2):149–160. https://doi.org/10.1016/J.WEAR.2013.07.012

Nguyen VH, Zheng D, Schmerwitz F, Wriggers P (2018) An advanced abrasion model for tire wear. Wear 396–397:75–85. https://doi.org/10.1016/J.WEAR.2017.11.009CrossRef

Park I, Kim H, Lee S (2018) Characteristics of tire wear particles generated in a laboratory simulation of tire/road contact conditions. J Aerosol Sci 124:30–40. https://doi.org/10.1016/J.JAEROSCI.2018.07.005CrossRef

10.

Savkoor AR (1966) Some aspects of friction and wear of tyres arising from deformations, slip and stresses at the ground contact. Wear 9(1):66–78. https://doi.org/10.1016/0043-1648(66)90015-9CrossRef

11.

Serafinska A, Hassoun N, Kaliske M (2016) Numerical optimization of wear performance—utilizing a metamodel based friction law. Comput Struct 165:10–23. https://doi.org/10.1016/J.COMPSTRUC.2015.11.013CrossRef

12.

Vieira T, Ferreira RP, Kuchiishi AK, Bernucci LLB, Sinatora A (2015) Evaluation of friction mechanisms and wear rates on rubber tire materials by low-cost laboratory tests. Wear 328–329:556–562. https://doi.org/10.1016/J.WEAR.2015.04.001CrossRef

13.

Wu J, Chen L, Wang Y, Su B, Cui Z, Wang D (2019) Effect of temperature on wear performance of aircraft tire tread rubber. Polym Testing 79:106037. https://doi.org/10.1016/J.POLYMERTESTING.2019.106037CrossRef

14.

Wright KR, Botha TR, Els PS (2019) Effects of age and wear on the stiffness and friction properties of an SUV tyre. J Terrramech 84:21–30. https://doi.org/10.1016/J.JTERRA.2019.04.001CrossRef

15.

Abdolmaleki H, Jafari A, Tabatabaeifar A, Hajiahmad A, Goli H (2015) Development and evaluation of an in-situ tire testing facility with variable side slip angles. J Terrramech 59:49–58. https://doi.org/10.1016/J.JTERRA.2015.03.002CrossRef

16.

Bauer DR, Baldwin JM, Ellwood KR (2007) Rubber aging in tires. part 2: accelerated oven aging tests. Polym Degrad Stab 92(1):110–117. https://doi.org/10.1016/J.POLYMDEGRADSTAB.2006.08.014CrossRef

17.

Azura AR, Leow SL (2019) Effect of carbon black loading on mechanical, conductivity and ageing properties of natural rubber composites. Mater Today Proc 17:1056–1063. https://doi.org/10.1016/J.MATPR.2019.06.512CrossRef

18.

Rodriguez N, Dorogin L, Chew KT, Persson BNJ (2018) Adhesion, friction and viscoelastic properties for non-aged and aged styrene butadiene rubber. Tribol Int 121:78–83. https://doi.org/10.1016/J.TRIBOINT.2018.01.037CrossRef

19.

Zhang Z, Sun J, Lai Y, Wang Y, Liu X, Shi S, Chen X (2018) Effects of thermal aging on uniaxial ratcheting behavior of vulcanised natural rubber. Polym Testing 70:102–110. https://doi.org/10.1016/J.POLYMERTESTING.2018.06.030CrossRef

20.

Fu J-F, Yu W-Q, Dong X, Chen L-Y, Jia H-S, Shi L-Y, Zhong Q-D, Deng W (2013) Mechanical and tribological properties of natural rubber reinforced with carbon blacks and Al₂O₃ nanoparticles. Mater Des 49:336–346. https://doi.org/10.1016/J.MATDES.2013.01.033CrossRef

21.

D’Apuzzo M, Evangelisti A, Nicolosi V (2020) An exploratory step for a general unified approach to labelling of road surface and tyre wet friction. Accid Anal Prev 138:105462. https://doi.org/10.1016/J.AAP.2020.105462CrossRef

22.

Xie M, Tang H, Yao H (2016) Failure analysis of tire separation in two-sized tires on airbus planes. Eng Fail Anal 61:21–27. https://doi.org/10.1016/J.ENGFAILANAL.2015.07.006CrossRef

23.

Jimenez E, Sandu C (2019) Towards a real-time pneumatic tire performance prediction using an advanced tire-ice interface model. J Terrramech 81:43–56. https://doi.org/10.1016/J.JTERRA.2018.04.004CrossRef

24.

Bhoopalam AK, Sandu C (2014) Review of the state of the art in experimental studies and mathematical modeling of tire performance on Ice. J Terrramech 53:19–35. https://doi.org/10.1016/J.JTERRA.2014.03.007CrossRef

25.

Taheri S, Sandu C, Taheri S, Pinto E, Gorsich D (2015) A technical survey on terramechanics models for tire–terrain interaction used in modeling and simulation of wheeled vehicles. J Terrramech 57:1–22. https://doi.org/10.1016/J.JTERRA.2014.08.003CrossRef

26.

El-Sayegh Z, El-Gindy M, Johansson I, Öijer F (2020) Development and validation of off-road tire-gravelly soil interaction using advanced computational techniques. J Terrramech 91:45–51. https://doi.org/10.1016/j.jterra.2020.05.004CrossRef

27.

Yang P, Zang M, Zeng H, Guo X (2020) The interactions between an off-road tire and granular terrain: GPU-based DEM-FEM simulation and experimental validation. Int J Mech Sci 179:105634. https://doi.org/10.1016/j.ijmecsci.2020.105634CrossRef

28.

Senatore C, Sandu C (2011) Off-road tire modeling and the multi-pass effect for vehicle dynamics simulation. J Terrramech 48(4):265–276. https://doi.org/10.1016/j.jterra.2011.06.006CrossRef

29.

Recuero A, Serban R, Peterson B, Sugiyama H, Jayakumar P, Negrut D (2017) A high-fidelity approach for vehicle mobility simulation: Nonlinear finite element tires operating on granular material. J Terrramech 72:39–54. https://doi.org/10.1016/J.JTERRA.2017.04.002CrossRef

30.

Babulal Y, Stallmann MJ, Els PS (2015) Parameterisation and modelling of large off-road tyres for on-road handling analyses. J Terrramech 61:77–85. https://doi.org/10.1016/J.JTERRA.2015.07.001CrossRef

31.

Title: A Review on Automotive Tires Significant Characteristic Identification for General Consumers
Authors: Ahmad Noor Syukri Zainal Abidin
Arief Hakimi Azmi
Khairil Anwar Abu Kassim
Ahmad Shahir Jamaludin
Mohd Nizar Mhd Razali
Publisher: Springer Nature Singapore
Book: Proceedings of the 2nd Energy Security and Chemical Engineering Congress
Print ISBN: 978-981-19-4424-6

Electronic ISBN: 978-981-19-4425-3

Copyright Year: 2023
DOI: https://doi.org/10.1007/978-981-19-4425-3_33