Top

The International Journal of Advanced Manufacturing Technology

Published in:

27-02-2024 | Critical Review

A state-of-the-art review on sustainability evaluation of machining processes involving the effects of advanced cooling technologies

Authors: Muhammad Jamil, Ning He, Zhao Wei, Ray Tahir Mushtaq, Aqib Mashood Khan, Hussien Hegab, Munish Kumar Gupta, Navneet Khanna

Published in: The International Journal of Advanced Manufacturing Technology | Issue 9-10/2024

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

Sustainable manufacturing has become a global and societal goal. Although its execution is much slower, the manufacturing sector is also slowing down the unsustainable practices. One of the difficulties in the implementation of sustainability is to re-engineer its evaluation for specific fields. This study brings sustainable manufacturing underpinned an overall performance index (OPI) by integrating machinability metrics, sustainability metrics, and their comprehensive sustainability evaluation. It involves quantitative and qualitative factors such as the operator’s health, shop floor environment, air quality, chip removal, and surface quality of the product in this assessment process. In this attempt, the application of the framework is presented for the assessment of sustainability through a case study with different green and hybrid lubri-cooling technologies in machining processes. These technologies have the potential to contribute to cleaner production by reducing the consumption of cutting fluid, cutting tools, energy, and carbon emissions. Considering these state-of-the-art cooling technologies, this research aims to explore their advantages and promote their application in engineering fields, thereby opening new possibilities for sustainable manufacturing practices.

previous article Experimental investigation on Ti2AlNb in high-efficiency short electric arc milling

next article Cathode design and structure optimization of the ECM for special-shaped deep holes

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Uhlmann E, Peukert B, Thom S et al (2017) Solutions for sustainable machining. J Manuf Sci E T ASME. https://doi.org/10.1115/1.4034850CrossRef

Hegab HA, Darras B, Kishawy HA (2018) Towards sustainability assessment of machining processes. J Clean Prod. https://doi.org/10.1016/j.jclepro.2017.09.197CrossRef

Sivalingam V, Liu H, Selvam B, Kai G, Kumar PG, Gupta MK, Korkmaz ME, Sun J (2024) Towards sustainability assessment, energy consumption, and carbon emissions in cryogenic drilling of Alloy 20: a new approach towards sustainable future and challenges. Int J Adv Manuf Technol 5:1–5

Korkmaz ME, Gupta MK, Yilmaz H, Ross NS, Boy M, Sivalingam VK, Chan CK, Raman J (2023) Towards specific cutting energy analysis in the machining of Inconel 601 alloy under sustainable cooling conditions. J Market Res 1(27):4074–4087

Javaid M, Haleem A, Singh RP, et al (2022) Understanding the adoption of Industry 4.0 technologies in improving environmental sustainability. Sustain Operations Comp. https://doi.org/10.1016/j.susoc.2022.01.008

Sartal A, Bellas R, Mejías AM, García-Collado A (2020) The sustainable manufacturing concept, evolution and opportunities within Industry 4.0: a literature review. Adv Mech Eng. https://doi.org/10.1177/1687814020925232

Hegab H, Shaban I, Jamil M, Khanna N (2023) Toward sustainable future: strategies, indicators, and challenges for implementing sustainable production systems. Sustain Mater Technol. https://doi.org/10.1016/j.susmat.2023.e00617CrossRef

Enyoghasi C, Badurdeen F (2021) Industry 4.0 for sustainable manufacturing: opportunities at the product, process, and system levels. Resour Conserv Recycl. https://doi.org/10.1016/j.resconrec.2020.105362

Jovane F, Koren Y, Boër CR (2003) Present and future of flexible automation: towards new paradigms. CIRP Ann Manuf Technol. https://doi.org/10.1016/S0007-8506(07)60203-0CrossRef

10.

Abubakr M, Abbas AT, Tomaz I et al (2020) Sustainable and smart manufacturing: an integrated approach. Sustainability 12:2280. https://doi.org/10.3390/su12062280CrossRef

11.

Pusavec F, Kopac J (2009) Achieving and implementation of sustainability principles in machining processes. J Adv Produc Eng Manag 3(4):58–69

12.

Jeswiet J, Kara S (2008) Carbon emissions and CES™ in manufacturing. CIRP Ann 57:17–20. https://doi.org/10.1016/j.cirp.2008.03.117CrossRef

13.

Hariyani, D., Mishra, S., Sharma, M. K., & Hariyani, P. (2022). Organizational barriers to the sustainable manufacturing system: A literature review. Environ Chall, 100606

14.

Yang L, Zou H, Shang C, et al (2023) Adoption of information and digital technologies for sustainable smart manufacturing systems for industry 4.0 in small, medium, and micro enterprises (SMMEs). Technol Forecast Soc Change. https://doi.org/10.1016/j.techfore.2022.122308

15.

Shahzad M, Qu Y, Rehman SU, Zafar AU (2022) Adoption of green innovation technology to accelerate sustainable development among manufacturing industry. J Innov Knowl. https://doi.org/10.1016/j.jik.2022.100231CrossRef

16.

Lynch ME, Williams K, Cabrera M, Beccuti T (2021) Surface finishing of additively manufactured IN718 lattices by electrochemical machining. Int J Adv Manuf Technol. https://doi.org/10.1007/s00170-020-05699-8CrossRef

17.

Marques A, Guimarães B, Cerqueira M et al (2023) Multi-material inconel 718 parts with highly conductive copper cooling channels for aerospace applications. Adv Eng Mater. https://doi.org/10.1002/adem.202201349CrossRef

18.

Kumar Mishra S, Ghosh S, Aravindan S (2020) Machining performance evaluation of Ti6Al4V alloy with laser textured tools under MQL and nano-MQL environments. J Manuf Process. https://doi.org/10.1016/j.jmapro.2020.02.014CrossRef

19.

Gautam A, Chetan BG, Dutta P (2022) Environment-friendly machining of aerospace-grade Ti alloy using SiAlON ceramic and AlTiN coated carbide inserts under sustainable biodegradable mist condition. CIRP J Manuf Sci Technol. https://doi.org/10.1016/j.cirpj.2022.08.006CrossRef

20.

Barreto R, Malagi RR, Chougula SR. (2020) optimization for machining parameters in turning of AISI 52100 steel for manufacturing services-genetic algorithm method. Int J Innov Technol. https://doi.org/10.35940/ijitee.b6624.019320

21.

Wang W, Salvatore F, Rech J (2020) Characteristic assessment and analysis of residual stresses generated by dry belt finishing on hard turned AISI52100. J Manuf Process 59:11–18. https://doi.org/10.1016/j.jmapro.2020.09.039CrossRef

22.

Ferri C, Minton T, Bin Che Ghani S, Cheng K (2014) Efficiency in contamination-free machining using microfluidic structures. CIRP J Manuf Sci Technol 7:97–105. https://doi.org/10.1016/j.cirpj.2013.12.001CrossRef

23.

Singh GR, Gupta MK, Mia M, Sharma VS (2018) Modeling and optimization of tool wear in MQL-assisted milling of Inconel 718 superalloy using evolutionary techniques. Int J Adv Manuf Technol. https://doi.org/10.1007/s00170-018-1911-3CrossRef

24.

Gajrani KK, Ram D, Ravi Sankar M (2017) Biodegradation and hard machining performance comparison of eco-friendly cutting fluid and mineral oil using flood cooling and minimum quantity cutting fluid techniques. J Clean Prod. https://doi.org/10.1016/j.jclepro.2017.07.217CrossRef

25.

Kaynak Y, Gharibi A (2018) Progressive tool wear in cryogenic machining: the effect of liquid nitrogen and carbon dioxide. J Manuf Mater Process. https://doi.org/10.3390/jmmp2020031CrossRef

26.

Zhu D, Zhang X, Ding H (2013) Tool wear characteristics in machining of nickel-based superalloys. Int J Mach Tools Manuf 64:60–77. https://doi.org/10.1016/j.ijmachtools.2012.08.001CrossRef

27.

Sun X, Bateman R, Cheng K, Ghani SC (2012) Design and analysis of an internally cooled smart cutting tool for dry cutting. Proc Inst Mech Eng B J Eng Manuf 226:585–591. https://doi.org/10.1177/0954405411424670CrossRef

28.

Kishawy HA, Hegab H, Saad E (2018) Design for sustainable manufacturing: Approach, implementation, and assessment. Sustainability 10(10):3604CrossRef

29.

Iqbal A, Biermann D, Abbas H et al (2018) Machining β-titanium alloy under carbon dioxide snow and micro-lubrication: a study on tool deflection, energy consumption, and tool damage. Int J Adv Manuf Technol. https://doi.org/10.1007/s00170-018-2267-4CrossRef

30.

Supekar SD, Clarens AF, Stephenson DA, Skerlos SJ (2012) Performance of supercritical carbon dioxide sprays as coolants and lubricants in representative metalworking operations. J Mater Process Technol. https://doi.org/10.1016/j.jmatprotec.2012.07.020CrossRef

31.

Mia M, Dhar NR (2018) Effects of duplex jets high-pressure coolant on machining temperature and machinability of Ti-6Al-4V superalloy. J Mater Process Technol 252:688–696. https://doi.org/10.1016/j.jmatprotec.2017.10.040CrossRef

32.

Shokrani A, Al-Samarrai I, Newman ST (2019) Hybrid cryogenic MQL for improving tool life in machining of Ti-6Al-4V titanium alloy. J Manuf Process. https://doi.org/10.1016/j.jmapro.2019.05.006CrossRef

33.

Jamil M, He N, Gupta MK et al (2022) Tool wear mechanisms and its influence on machining tribology of face milled titanium alloy under sustainable hybrid lubri-cooling. Tribol Int 170:107497. https://doi.org/10.1016/j.triboint.2022.107497CrossRef

34.

Ferri C, Minton T, Ghani SBC, Cheng K (2014) Internally cooled tools and cutting temperature in contamination-free machining. Proc Inst Mech Eng C J Mech Eng Sci 228:135–145. https://doi.org/10.1177/0954406213480312CrossRef

35.

Paul S, Dhar NR, Chattopadhyay AB (2001) Beneficial effects of cryogenic cooling over dry and wet machining on tool wear and surface finish in turning AISI 1060 steel. J Mater Process Technol. https://doi.org/10.1016/S0924-0136(01)00839-1CrossRef

36.

Ding, Y., & Hong, S. Y. (1995). A study of the cutting temperatures in machining processes cooled by liquid nitrogen. Transactions-north American Manufacturing Research Institution of Sme, 115–120

37.

Hong SY, Markus I, Jeongcheol W (2001) New cooling approach and tool life improvement in cryogenic machining of titanium alloy Ti-6Al-4V. Int J Mach Tools Manuf. https://doi.org/10.1016/S0890-6955(01)00041-4CrossRef

38.

Shokrani A, Dhokia V, Newman ST (2016) Investigation of the effects of cryogenic machining on surface integrity in CNC end milling of Ti-6Al-4V titanium alloy. J Manuf Process. https://doi.org/10.1016/j.jmapro.2015.12.002CrossRef

39.

Musfirah AH, Ghani JA, Haron CHC (2017) Tool wear and surface integrity of inconel 718 in dry and cryogenic coolant at high cutting speed. Wear. https://doi.org/10.1016/j.wear.2017.01.031CrossRef

40.

Jamil M, He N, Zhao W et al (2021) Heat transfer efficiency of Cryogenic-LN2 and CO2-snow and their application in the Turning of Ti-6AL-4V. Int J Heat Mass Transf 166:120716. https://doi.org/10.1016/j.ijheatmasstransfer.2020.120716CrossRef

41.

Kim DM, Kim HI, Park HW (2021) Tool wear, economic costs, and CO2 emissions analysis in cryogenic assisted hard-turning process of AISI 52100 steel. Sustain Mater Technol. https://doi.org/10.1016/j.susmat.2021.e00349CrossRef

42.

Iqbal A, Zhao G, Zaini J et al (2021) Sustainable hole-making in a titanium alloy using throttle and evaporative cryogenic cooling and micro-lubrication. J Manuf Process. https://doi.org/10.1016/j.jmapro.2021.04.072CrossRef

43.

Pušavec F, Grguraš D, Koch M, Krajnik P (2019) Cooling capability of liquid nitrogen and carbon dioxide in cryogenic milling. CIRP Ann. https://doi.org/10.1016/j.cirp.2019.03.016CrossRef

44.

Cao A, Hua Y, Sun Z, Meng Z, Guo Z, Zhang N (2024) Study on reduction of pressureoscillation in low-velocity steam jet condensation. Ann Nucl Energy 197:110271. https://doi.org/10.1016/j.anucene.2023.110271CrossRef

45.

Fernández D, Sandá A, Bengoetxea I (2019) Cryogenic milling: study of the effect of CO2 cooling on tool wear when machining Inconel 718, grade EA1N steel and gamma TiAl. Lubricants 7:10. https://doi.org/10.3390/lubricants7010010CrossRef

46.

Hegab H, Damir A, Attia H (2021) Sustainable machining of Ti-6Al-4V using cryogenic cooling: an optimized approach. Procedia CIRP 101:346–349. https://doi.org/10.1016/j.procir.2021.02.036CrossRef

47.

Raza SW, Pervaiz S, Deiab I (2014) Tool wear patterns when turning of titanium alloy using sustainable lubrication strategies. Int J Precis Eng Manuf 15:1979–1985. https://doi.org/10.1007/s12541-014-0554-zCrossRef

48.

Qu S, Gong Y, Yang Y et al (2020) An investigation of carbon nanofluid minimum quantity lubrication for grinding unidirectional carbon fibre-reinforced ceramic matrix composites. J Clean Prod 249:119353. https://doi.org/10.1016/j.jclepro.2019.119353CrossRef

49.

Furness R, Stoll A, Nordstrom G, Martini G, Johnson J, Loch T, Klosinski R (2006) Minimum quantity lubrication (MQL) machining for complex powertrain components. International Manufacturing Science and Engineering Conference 47624:965–973

50.

Najiha MS, Rahman MM, Kadirgama K (2016) Parametric optimization of end milling process under minimum quantity lubrication with nanofluid as cutting medium using pareto optimality approach. Int J Automot Mech Eng 13:3345–3360. https://doi.org/10.15282/ijame.13.2.2016.5.0277CrossRef

51.

Sadeghi MH, Hadad MJ, Tawakoli T et al (2010) An investigation on surface grinding of AISI 4140 hardened steel using minimum quantity lubrication-MQL technique. IntJ Mater Form 3:241–251. https://doi.org/10.1007/s12289-009-0678-3CrossRef

52.

Dhar NR, Islam MW, Islam S, Mithu MAH (2006) The influence of minimum quantity of lubrication (MQL) on cutting temperature, chip and dimensional accuracy in turning AISI-1040 steel. J Mater Process Technol 171:93–99. https://doi.org/10.1016/j.jmatprotec.2005.06.047CrossRef

53.

Qu S, Yao P, Gong Y et al (2022) Environmentally friendly grinding of C/SiCs using carbon nanofluid minimum quantity lubrication technology. J Clean Prod 366:132898. https://doi.org/10.1016/j.jclepro.2022.132898CrossRef

54.

Said Z, Sundar LS, Tiwari AK et al (2022) Recent advances on the fundamental physical phenomena behind stability, dynamic motion, thermophysical properties, heat transport, applications, and challenges of nanofluids. Phys Rep 946:1–94. https://doi.org/10.1016/j.physrep.2021.07.002CrossRef

55.

Zhang Y, Li C, Jia D et al (2015) Experimental evaluation of the lubrication performance of MoS2/CNT nanofluid for minimal quantity lubrication in Ni-based alloy grinding. Int J Mach Tools Manuf 99:19–33. https://doi.org/10.1016/j.ijmachtools.2015.09.003CrossRef

56.

Zhang J, Li C, Zhang Y et al (2018) Experimental assessment of an environmentally friendly grinding process using nanofluid minimum quantity lubrication with cryogenic air. J Clean Prod 193:236–248. https://doi.org/10.1016/j.jclepro.2018.05.009CrossRef

57.

Duan Z, Li C, Zhang Y et al (2023) Mechanical behavior and semiempirical force model of aerospace aluminum alloy milling using nano biological lubricant. Front Mech Eng 18:4. https://doi.org/10.1007/s11465-022-0720-4CrossRef

58.

Jamil M, Khan AM, Hegab H et al (2020) Milling of Ti–6Al–4V under hybrid Al2O3-MWCNT nanofluids considering energy consumption, surface quality, and tool wear: a sustainable machining. Int J Adv Manuf Technol. https://doi.org/10.1007/s00170-020-05296-9CrossRef

59.

Khan AM, Jamil M, Mia M et al (2020) Sustainability-based performance evaluation of hybrid nanofluid assisted machining. J Clean Prod 257:120541. https://doi.org/10.1016/j.jclepro.2020.120541CrossRef

60.

Nguyen TK, Do I, Kwon P (2012) A tribological study of vegetable oil enhanced by nano-platelets and implication in MQL machining. Int J Precis Eng Manuf. https://doi.org/10.1007/s12541-012-0141-0CrossRef

61.

Jamil M, He N, Zhao W et al (2022) Tribology and machinability performance of hybrid Al2O3 -MWCNTs nanofluids-assisted MQL for milling Ti-6Al-4 V. Int J Adv Manuf Technol 119:2127–2144. https://doi.org/10.1007/s00170-021-08279-6CrossRef

62.

Khan AM, Zhao W, Li L, et al (2021) Assessment of cumulative energy demand, production cost, and CO2 emission from hybrid CryoMQL assisted machining. J Clean Prod 292. https://doi.org/10.1016/j.jclepro.2021.125952

63.

Çetindağ HA, Çiçek A, Uçak N (2020) The effects of CryoMQL conditions on tool wear and surface integrity in hard turning of AISI 52100 bearing steel. J Manuf Process 56:463–473. https://doi.org/10.1016/j.jmapro.2020.05.015CrossRef

64.

Pereira O, Català P, Rodríguez A et al (2015) The Use of Hybrid CO2+MQL in Machining Operations. Procedia Eng 132:492–499. https://doi.org/10.1016/j.proeng.2015.12.524CrossRef

65.

Jamil M, He N, Zhao W et al (2022) A novel low-pressure hybrid dry ice blasting system for improving the tribological and machining characteristics of AISI-52100 tool steel. J Manuf Process 80:152–160. https://doi.org/10.1016/j.jmapro.2022.05.056CrossRef

66.

Jamil M, He N, Zhao W et al (2022) Assessment of energy consumption, carbon emissions and cost metrics under hybrid MQL-Dry ice blasting system: a novel cleaner production technology for manufacturing sectors. J Clean Prod 360:132111. https://doi.org/10.1016/j.jclepro.2022.132111CrossRef

67.

Sartori S, Ghiotti A, Bruschi S (2017) Hybrid lubricating/cooling strategies to reduce the tool wear in finishing turning of difficult-to-cut alloys. Wear 376–377:107–114. https://doi.org/10.1016/j.wear.2016.12.047CrossRef

68.

Rahim EA, Sasahara H (2011) A study of the effect of palm oil as MQL lubricant on high speed drilling of titanium alloys. Tribol Int. https://doi.org/10.1016/j.triboint.2010.10.032CrossRef

69.

Suda S, Yokota H, Inasaki I, Wakabayashi T (2002) A synthetic ester as an optimal cutting fluid for minimal quantity lubrication machining. CIRP Ann Manuf Technol 51:95–98. https://doi.org/10.1016/S0007-8506(07)61474-7CrossRef

70.

Grützmacher PG, Rosenkranz A, Rammacher S et al (2017) The influence of centrifugal forces on friction and wear in rotational sliding. Tribol Int. https://doi.org/10.1016/j.triboint.2017.07.021CrossRef

71.

Bacci da Silva M, Wallbank J (1999) Cutting temperature: prediction and measurement methods—a review. J Mater Process Technol 88:195–202. https://doi.org/10.1016/S0924-0136(98)00395-1CrossRef

72.

Sen B, Mia M, Mandal UK, Mondal SP (2020) Synergistic effect of silica and pure palm oil on the machining performances of Inconel 690: a study for promoting minimum quantity nano doped-green lubricants. J Clean Prod 258:120755. https://doi.org/10.1016/j.jclepro.2020.120755CrossRef

73.

Mark Benjamin D, Sabarish VN, Hariharan MV, Samuel Raj D (2018) On the benefits of sub-zero air supplemented minimum quantity lubrication systems: an experimental and mechanistic investigation on end milling of Ti-6-Al-4-V alloy. Tribol Int 119:464–473. https://doi.org/10.1016/j.triboint.2017.11.021CrossRef

74.

Caudill J, Schoop J, Jawahir IS (2019) Numerical modeling of cutting forces and temperature distribution in high speed cryogenic and flood-cooled milling of Ti-6Al-4V. Procedia CIRP 82:83–88. https://doi.org/10.1016/j.procir.2019.04.055CrossRef

75.

Danish M, Gupta MK, Rubaiee S et al (2021) Influence of hybrid Cryo-MQL lubri-cooling strategy on the machining and tribological characteristics of Inconel 718. Tribol Int 163:107178. https://doi.org/10.1016/j.triboint.2021.107178CrossRef

76.

Usca ÜA, Uzun M, Şap S et al (2022) Tool wear, surface roughness, cutting temperature and chips morphology evaluation of Al/TiN coated carbide cutting tools in milling of Cu–B–CrC based ceramic matrix composites. J Market Res. https://doi.org/10.1016/j.jmrt.2021.12.063CrossRef

77.

Wang JY, Liu CR, Wang KK (1999) The effect of tool flank wear on the heat transfer, thermal damage and cutting mechanics in finish hard tuning. CIRP Ann 48:53–58. https://doi.org/10.1016/S0007-8506(07)63130-8CrossRef

78.

Iqbal A, Al-Ghamdi KA, Hussain G (2016) Effects of tool life criterion on sustainability of milling. J Clean Prod. https://doi.org/10.1016/j.jclepro.2016.08.162CrossRef

79.

Bhushan RK (2013) Optimization of cutting parameters for minimizing power consumption and maximizing tool life during machining of Al alloy SiC particle composites. J Clean Prod 39:242–254. https://doi.org/10.1016/j.jclepro.2012.08.008CrossRef

80.

Khan AM, He N, Zhao W et al (2021) Cryogenic-LN2 and conventional emulsion assisted machining of hardened steel: comparison from sustainability perspective. Proc Inst Mech Eng B J Eng Manuf. https://doi.org/10.1177/0954405420971992CrossRef

81.

Makhesana MA, Patel KM, Bagga PJ (2022) Evaluation of surface roughness, tool wear and chip morphology during machining of nickel-based alloy under sustainable hybrid nanofluid-MQL strategy. Lubricants 10:315. https://doi.org/10.3390/lubricants10110315CrossRef

82.

Airao J, Nirala CK, Bertolini R et al (2022) Sustainable cooling strategies to reduce tool wear, power consumption and surface roughness during ultrasonic assisted turning of Ti-6Al-4V. Tribol Int 169:107494. https://doi.org/10.1016/j.triboint.2022.107494CrossRef

83.

Novovic D, Dewes RC, Aspinwall DK et al (2004) The effect of machined topography and integrity on fatigue life. Int J Mach Tools Manuf. https://doi.org/10.1016/j.ijmachtools.2003.10.018CrossRef

84.

Ghanem F, Braham C, Fitzpatrick ME, Sidhom H (2002) Effect of near-surface residual stress and microstructure modification from machining on the fatigue endurance of a tool steel. J Mater Eng Perform. https://doi.org/10.1361/105994902770343629CrossRef

85.

Xu M, Ni X, Liu Q, Chen C, Deng X, Wang, X.,... Yu, R. (2024) Ultra-high pressure improved gelation and digestive properties of Tai Lake whitebait myofibrillar protein. Food Chem: X 21:101061. https://doi.org/10.1016/j.fochx.2023.101061CrossRef

86.

Liang X, Liu Z (2018) Tool wear behaviors and corresponding machined surface topography during high-speed machining of Ti-6Al-4V with fine grain tools. Tribol Int 121:321–332. https://doi.org/10.1016/j.triboint.2018.01.057CrossRef

87.

Li X, Liu Z, Liang X (2019) Tool Wear, Surface topography, and multi-objective optimization of cutting parameters during machining AISI 304 austenitic stainless steel flange. Metals (Basel) 9:972. https://doi.org/10.3390/met9090972CrossRef

88.

Chen Y, Wang G, Song L, Shen X, Wang J, Huo, J.,... Nie, Q. (2017) Unraveling the Crystallization Kinetics of Supercooled Liquid GeTe by Ultrafast Calorimetry. Cryst Growth Des 17(7):3687–3693. https://doi.org/10.1021/acs.cgd.7b00259CrossRef

89.

Khan AM, Zhao W, Li L et al (2021) Assessment of cumulative energy demand, production cost, and CO2 emission from hybrid CryoMQL assisted machining. J Clean Prod 292:125952. https://doi.org/10.1016/j.jclepro.2021.125952CrossRef

90.

Hands D, Sheehan MJ, Wong B, Lick HB (1996) Comparison of metalworking fluid mist exposures from machining with different levels of machine enclosure. Am Ind Hyg Assoc J 57:1173–1178. https://doi.org/10.1080/15428119691014305CrossRef

91.

Adler DP, Hii WW-S, Michalek DJ, Sutherland JW (2006) Examining the role of cutting fluids in machining and efforts to address associated environmental/health concerns. Mach Sci Technol 10:23–58. https://doi.org/10.1080/10910340500534282CrossRef

92.

Lv T, Xu X, Yu A et al (2021) Ambient air quantity and cutting performances of water-based Fe3O4 nanofluid in magnetic minimum quantity lubrication. Int J Adv Manuf Technol 115:1711–1722. https://doi.org/10.1007/s00170-021-07231-yCrossRef

93.

Park K-H, Olortegui-Yume J, Yoon M-C, Kwon P (2010) A study on droplets and their distribution for minimum quantity lubrication (MQL). Int J Mach Tools Manuf 50:824–833. https://doi.org/10.1016/j.ijmachtools.2010.05.001CrossRef

94.

Shokrani, A., Dhokia, V., & Newman, S. T. (2016). Modelling and verification of energy consumption in CNC milling. In: Sustainable Design and Manufacturing, Springer International Publishing. pp 123–133

95.

Xu P, Lan D, Wang F, Shin I (2023) In-memory computing integrated structure circuit based on nonvolatile flash memory unit. Electronics 12(14):3155. https://doi.org/10.3390/electronics12143155CrossRef

96.

Dong H, Geng Y, Xi F, Fujita T (2013) Carbon footprint evaluation at industrial park level: a hybrid life cycle assessment approach. Energy Policy 57:298–307. https://doi.org/10.1016/j.enpol.2013.01.057CrossRef

97.

Pereira O, Rodríguez A, Fernández-Abia AI et al (2016) Cryogenic and minimum quantity lubrication for an eco-efficiency turning of AISI 304. J Clean Prod 139:440–449. https://doi.org/10.1016/j.jclepro.2016.08.030CrossRef

98.

Çamlı KY, Demirsöz R, Boy M et al (2022) Performance of MQL and nano-MQL lubrication in machining ER7 steel for train wheel applications. Lubricants. https://doi.org/10.3390/lubricants10040048CrossRef

99.

Demirsöz R, Korkmaz ME, Gupta MK (2022) A novel use of hybrid Cryo-MQL system in improving the tribological characteristics of additively manufactured 316 stainless steel against 100 Cr6 alloy. Tribol Int. https://doi.org/10.1016/j.triboint.2022.107613CrossRef

100.

Gajrani KK (2020) Assessment of cryo-MQL environment for machining of Ti-6Al-4V. J Manuf Process 60:494–502. https://doi.org/10.1016/j.jmapro.2020.10.038CrossRef

101.

Khan AM, Liang L, Mia M et al (2021) Development of process performance simulator (PPS) and parametric optimization for sustainable machining considering carbon emission, cost and energy aspects. Renew Sustain Energy Rev 139:110738. https://doi.org/10.1016/j.rser.2021.110738CrossRef

102.

Al-Sharafi A, Sahin AZ, Yilbas BS (2015) Overall performance index for hybrid power plants. Energy Convers Manag 100:103–116. https://doi.org/10.1016/j.enconman.2015.04.067CrossRef

103.

Mustafa AM, Barabadi A, Markeset T, Naseri M (2021) An overall performance index for wind farms: a case study in Norway Arctic region. Int J Syst Assur Eng Manag 12:938–950. https://doi.org/10.1007/s13198-021-01165-0CrossRef

104.

Jamil M, He N, Wei Z et al (2023) A novel quantifiable approach of estimating energy consumption, carbon emissions and cost factors in manufacturing of bearing steel based on triple bottom-line approach. Sustain Mater Technol 36:e00593. https://doi.org/10.1016/J.SUSMAT.2023.E00593CrossRef

105.

Khan AM, Gupta MK, Hegab H, et al (2020) Energy-based cost integrated modelling and sustainability assessment of Al-GnP hybrid nanofluid assisted turning of AISI52100 steel. J Clean Prod 257. https://doi.org/10.1016/j.jclepro.2020.120502

106.

Jamil M, He N, Zhao W et al (2021) Tribological behavior of WC-6Co against Ti–6Al–4V alloy under novel cryogenic ethanol-ester oil dry-ice hybrid lubri-cooling. Tribol Int 156:106812. https://doi.org/10.1016/j.triboint.2020.106812CrossRef

107.

Ramanan KV, Ramesh Babu S, Jebaraj M, Nimel Sworna Ross K (2021) Face turning of Incoloy 800 under MQL and nano-MQL environments. Mater Manuf Processes 36:1769–1780. https://doi.org/10.1080/10426914.2021.1944191CrossRef

Title: A state-of-the-art review on sustainability evaluation of machining processes involving the effects of advanced cooling technologies
Authors: Muhammad Jamil
Ning He
Zhao Wei
Ray Tahir Mushtaq
Aqib Mashood Khan
Hussien Hegab
Munish Kumar Gupta
Navneet Khanna
Publication date: 27-02-2024
Publisher: Springer London
Published in: The International Journal of Advanced Manufacturing Technology / Issue 9-10/2024
Print ISSN: 0268-3768
Electronic ISSN: 1433-3015
DOI: https://doi.org/10.1007/s00170-024-13303-6

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 9-10/2024

Variation of the vibrational treatment on mechanical properties and weld residual stress

Vacuum-oxygen-low recycling process of aluminium composites manufactured from steel machining chips

Multi-step cutting depth optimization method based on the removal mechanism of SiCp/Al

A novel prediction method for assembly accuracy of rudder systems considering clearance factors

A novel path planning method of robotic grinding for free-form weld seam based on 3D point cloud

Process parameter optimization of K477 and GH4169 for defect control in laser-directed energy deposition using Taguchi design of experiments

Premium Partners