Top

Published in:

2024 | OriginalPaper | Chapter

11. A Study on Machinability of High-Strength CFRP Composites: Influence of Coated Cutting Tools on Cutting Performance and Surface Quality

Authors : Rajneesh Raghav, Rahul S. Mulik

Published in: Polymer Composites: From Computational to Experimental Aspects

Publisher: Springer Nature Singapore

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

High-strength carbon fiber reinforced composites (CFRP) because of their outstanding mechanical properties and lightweight characteristics have drawn a lot of interest from the research community and various industries. Due to their remarkable properties CFRPs are being used everywhere but, there are certain challenges in their machining process, such as delamination, abrasive wear, and poor surface finish of obtained product. This challenge needs to be addressed with innovative and effective solutions. This study discusses one such key solution, i.e., using coated cutting tools to improve machining efficiency and productivity and produce a good surface finish. Furthermore, this chapter briefly discusses the application areas of CFRPs and the challenges associated with the machining of these composites. Moreover, by a systematic analysis of cutting parameters, tool coatings, and their interactions, this chapter explains the intricate relationship between tool selection and machining performance. In addition, this chapter will be a helpful resource for researchers, engineers, and practitioners for improving the machinability of CFRP composites.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

previous chapter Short and Micro Cellulose-Based Environmentally Friendly Polymer Composites

next chapter Reactive Extrusion: Filled Polymer Compounds and Its Applications

Praveenkumara J, Madhu P, Yashas Gowda TG, Sanjay MR, Siengchin S (2022) A comprehensive review on the effect of synthetic filler materials on fiber-reinforced hybrid polymer composites. J Text Inst (Taylor & Francis) 113(7):1231–1239. https://doi.org/10.1080/00405000.2021.1920151

Slamani M, Gauthier S, Chatelain JF (2015) A study of the combined effects of machining parameters on cutting force components during high speed robotic trimming of CFRPs. Meas J Int Meas Confed (Elsevier Ltd.) 59:268–283. https://doi.org/10.1016/j.measurement.2014.09.052

Makhdum F, Jennings LT, Roy A, Silberschmidt VV (2012) Cutting forces in ultrasonically assisted drilling of carbon fibre-reinforced plastics. J Phys Conf Ser 382(1)

Liu Y, Zwingmann B, Schlaich M (2015) Carbon fiber reinforced polymer for cable structures-a review. Polymers (Basel) 7(10):2078–2099CrossRef

Dydek K, Boczkowska A, Kozera R, Durałek P, Sarniak Ł, Wilk M, Łogin W (2021) Effect of Swcnt-Tuball paper on the lightning strike protection of CFRPS and their selected mechanical properties. Materials (Basel) 14(11)

Zhang J, Chevali VS, Wang H, Wang CH (2020) Current status of carbon fibre and carbon fibre composites recycling. Compos Part B Eng (Elsevier Ltd.) 193:108053. https://doi.org/10.1016/j.compositesb.2020.108053

Das TK, Ghosh P, Das NC (2019) Preparation, development, outcomes, and application versatility of carbon fiber-based polymer composites: a review. Adv Compos Hybrid Mater 2(2):214–233

Joost WJ (2012) Reducing vehicle weight and improving U.S. energy efficiency using integrated computational materials engineering. JOM 64(9):1032–1038

Jureczko M, Pawlak M, Mȩzyk A (2005) Optimisation of wind turbine blades. J Mater Process Technol 167(2–3):463–471CrossRef

10.

Zhang Q (2013) The “black revolution” of sports equipment: application of carbon fiber reinforced plastics (CFRP). Appl Mech Mater 440:69–73CrossRef

11.

Islam F, Ramkumar J, Milani AS (2015) A simplified damage prediction framework for milling of unidirectional carbon fiber-reinforced plastics. Adv Manuf Polym Compos Sci (Taylor & Francis) 1(4):175–184. https://doi.org/10.1080/20550340.2015.1117747

12.

Wang GD, Melly SK (2018) Three-dimensional finite element modeling of drilling CFRP composites using Abaqus/CAE: a review. Int J Adv Manuf Technol 94(1–4):599–614

13.

Nguyen-Dinh N, Hejjaji A, Zitoune R, Bouvet C, Salem M (2020) New tool for reduction of harmful particulate dispersion and to improve machining quality when trimming carbon/epoxy composites. Compos Part A Appl Sci Manuf (Elsevier) 131:105806. https://doi.org/10.1016/j.compositesa.2020.105806.

14.

Sheikh-Ahmad J, Davim JP (2012) Tool wear in machining processes for composites. Mach Technol Compos Mater 116–153

15.

Bouzakis KD, Michailidis N, Skordaris G, Bouzakis E, Biermann D, M’Saoubi R (2012) Cutting with coated tools: coating technologies, characterization methods and performance optimization. CIRP Ann - Manuf Technol CIRP 61(2):703–723. https://doi.org/10.1016/j.cirp.2012.05.006

16.

Arenas Cabello FJ (2015) “Eco Sostenible,” Ecosostenible N^o. 41, 2008, 30–37. ISSN-e 1699-3942

17.

Mkaddem A, Ben Soussia A, El Mansori M (2013) Wear resistance of CVD and PVD multilayer coatings when dry cutting fiber reinforced polymers (FRP). Wear (Elsevier B.V.) 302(1–2):946–954. https://doi.org/10.1016/j.wear.2013.03.017

18.

Wang X, Kwon PY, Sturtevant C, Kim DDW, Lantrip J (2013) Tool wear of coated drills in drilling CFRP. J Manuf Process (The Society of Manufacturing Engineers) 15(1):127–135. https://doi.org/10.1016/j.jmapro.2012.09.019

19.

Davim JP, Mata F (2008) Chemical vapour deposition (CVD) diamond coated tools performance in machining of PEEK composites. Mater Des 29(8):1568–1574CrossRef

20.

Wang X, Shen X, Yang G, Sun F (2017) Evaluation of boron-doped-microcrystalline/nanocrystalline diamond composite coatings in drilling of CFRP. Surf Coat Technol (Elsevier) 330:149–162. https://doi.org/10.1016/j.surfcoat.2017.10.002

21.

Raghav R, Kumar A, Mulik RS (2023) Comparison of CrN and CrTiN hard coatings developed on SiAlON tool inserts via magnetron sputtering process. J Mater Eng Perform 11665

22.

Belmonte M, Oliveira FJ, Lanna MA, Silva CRM, Corat EJ, Silva RF (2004) Turning of CFRC composites using Si₃N₄ and thin CVD diamond coated Si₃N₄ tools. Mater Sci Forum 455–456:609–613CrossRef

23.

Asaithambi S, Gowri S (2013) Study on machinability of CFRP composite using tin coated PCBN and uncoated PCBN cutting tool. IOSR J Mech Civ Eng 2320–2334

24.

Davim JP, Reis P (2003) Drilling carbon fiber reinforced plastics manufactured by autoclave-experimental and statistical study. Mater Des 24(5):315–324CrossRef

25.

Eneyew ED, Ramulu M (2014) Experimental study of surface quality and damage when drilling unidirectional CFRP composites. J Mater Res Technol (Korea Institute of Oriental Medicine) 3(4):354–362. https://doi.org/10.1016/j.jmrt.2014.10.003

26.

Karpat Y, Bahtiyar O (2015) Tool geometry based prediction of critical thrust force while drilling carbon fiber reinforced polymers. Adv Manuf (Shanghai University) 3(4):300–308

27.

An Q, Ming W, Cai X, Chen M (2015) Study on the cutting mechanics characteristics of high-strength UD-CFRP laminates based on orthogonal cutting method. Compos Struct (Elsevier Ltd.) 131:374–383. https://doi.org/10.1016/j.compstruct.2015.05.035

28.

Gao C, Xiao J, Xu J, Ke Y (2016) Factor analysis of machining parameters of fiber-reinforced polymer composites based on finite element simulation with experimental investigation. Int J Adv Manuf Technol 83(5–8):1113–1125CrossRef

29.

Liu H, Xie W, Sun Y, Zhang J, Chen N (2018) Investigations on micro-cutting mechanism and surface quality of carbon fiber-reinforced plastic composites. Int J Adv Manuf Technol 94(9–12):3655–3664

Title: A Study on Machinability of High-Strength CFRP Composites: Influence of Coated Cutting Tools on Cutting Performance and Surface Quality
Authors: Rajneesh Raghav
Rahul S. Mulik
Publisher: Springer Nature Singapore
Book: Polymer Composites: From Computational to Experimental Aspects
Print ISBN: 978-981-9708-87-1

Electronic ISBN: 978-981-9708-88-8

Copyright Year: 2024
DOI: https://doi.org/10.1007/978-981-97-0888-8_11

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Premium Partners