Top

Published in:

2019 | OriginalPaper | Chapter

Additive Manufacturing: New Trends in the 4^th Industrial Revolution

Authors : Luigi M. Galantucci, Maria Grazia Guerra, Michele Dassisti, Fulvio Lavecchia

Published in: Proceedings of the 4th International Conference on the Industry 4.0 Model for Advanced Manufacturing

Publisher: Springer International Publishing

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

Among the enabling technologies of the fourth industrial revolution, additive manufacturing (AM) is considered as a key factor for the success of the new production paradigm.

In this paper, the role of the AM technologies in the new scenery will be pointed out, focusing the attention on those factors enacting its success and its widespread diffusion among the most important companies of the main industrial sectors. These factors are mainly attributable to new materials of every kind, from polymers to metals passing from the composites, as well as, new processes, which open the possibility to reach new markets. The most relevant innovations will be reported, especially those related to the industrial implementation of AM. The issues related to the metrology of the additive manufacturing products and the sustainability of these manufacturing processes will be also described highlighting the main criticalities.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Wirtschaft"

Online-Abonnement

Mit Springer Professional "Wirtschaft" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 340 Zeitschriften

aus folgenden Fachgebieten:

Bauwesen + Immobilien
Business IT + Informatik
Finance + Banking
Management + Führung
Marketing + Vertrieb
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

previous chapter Zero Defect Manufacturing Strategies and Platform for Smart Factories of Industry 4.0

next chapter A Hidden Markov Model Based Approach to Modeling and Monitoring of Processes with Imperfect Maintenance

Pereira, A.C., Romero, F.: A review of the meanings and the implications of the Industry 4.0 concept. Procedia Manuf. 13, 1206–1214 (2017). https://doi.org/10.1016/j.promfg.2017.09.032CrossRef

Hosseini, M.: What will the future look like under Industry 4.0 and digital transformation in the healthcare space ? (2015). https://www.rolandberger.com/publications/publication_pdf/roland_berger_digital_transformation_in_healthcare_20150421.pdf. Accessed 25 Jan 2019

Galantucci, L.M., Lavecchia, F.: Direct digital manufacturing of ABS parts: an experimental study on effectiveness of proprietary software for shrinkage compensation. Int. J. Digit. Content Technol. Its Appl. 6, 546–555 (2012). https://doi.org/10.4156/jdcta.vol6.issue19.66CrossRef

Thompson, M.K., Moroni, G., Vaneker, T., Fadel, G., Campbell, R.I., Gibson, I., Bernard, A., Schulz, J., Graf, P., Ahuja, B., Martina, F.: Design for additive manufacturing: trends, opportunities, considerations, and constraints. CIRP Ann. - Manuf. Technol. 65, 737–760 (2016). https://doi.org/10.1016/j.cirp.2016.05.004CrossRef

Guo, N., Leu, M.C.: Additive manufacturing: technology, applications and research needs. Front. Mech. Eng. 8, 215–243 (2013). https://doi.org/10.1007/s11465-013-0248-8CrossRef

Wong, K.V., Hernandez, A.: A review of additive manufacturing. ISRN Mech. Eng. 2012, 1–10 (2012). https://doi.org/10.5402/2012/208760CrossRef

Michaels, D.: Europe Leads as Industrial 3-D Printing Takes Shape (2018). https://www.wsj.com/articles/europe-leads-as-industrial-3-d-printing-takes-shape-1493976603. Accessed 23 Jan 2019

McCue, T.J.: Wohlers Report 2018: 3D Printer Industry Tops $7 Billion (2018). https://www.forbes.com/sites/tjmccue/2018/06/04/wohlers-report-2018-3d-printer-industry-rises-21-percent-to-over-7-billion/#2aca53b2d1a4. Accessed 23 Jan 2019

Goldense, B.L.: Metal AM: Metal Additive Manufacturing Hits Critical Mass (2018). https://www.machinedesign.com/3d-printing/metal-am-metal-additive-manufacturing-hits-critical-mass. Accessed 22 Jan 2019

10.

McCue, T.J.: On Growth Path With Almost $3 Billion In Revenue (2018). https://www.forbes.com/sites/tjmccue/2018/08/30/3d-printing-service-bureaus-on-growth-path-with-almost-3-billion-in-revenue/#24fdad2d8d59. Accessed 23 Jan 2019

11.

Bourell, D., Pierre, J., Leu, M., Levy, G., Rosen, D., Beese, A.M., Clare, A.: Materials for additive manufacturing. CIRP Ann. - Manuf. Technol. 66, 659–681 (2017). https://doi.org/10.1016/j.cirp.2017.05.009CrossRef

12.

ISO/ASTM Standard 5290, Standard Terminology for Additive Manufacturing – General Principles – Part 1: Terminology (2015)

13.

Desimone, I.J.M., Hill, C., Ermoshkin, A., Us, N.C., Samulski, E.T., Hill, C., Us, N.C., Lawton, A., Examiner, P., Del, J.S.: (12) United States Patent, 2 (2016)

14.

Stansbury, J.W., Idacavage, M.J.: 3D printing with polymers: challenges among expanding options and opportunities. Dent. Mater. 32, 54–64 (2016). https://doi.org/10.1016/j.dental.2015.09.018CrossRef

15.

Do, A.V., Khorsand, B., Geary, S.M., Salem, A.K.: 3D printing of scaffolds for tissue regeneration applications. Adv. Healthc. Mater. 4, 1742–1762 (2015). https://doi.org/10.1002/adhm.201500168CrossRef

16.

Tumbleston, J.R., Shirvanyants, D., Ermoshkin, N., Janusziewicz, R., Johnson, A.R., Kelly, D., Chen, K., Pinschmidt, R., Rolland, J.P., Ermoshkin, A., Samulski, E.T., Desimone, J.M.: Additive manufacturing. Continuous liquid interface production of 3D objects. Sicence 347, 1349–1352 (2015). https://doi.org/10.1126/science.aaa2397

17.

Carbon, Continuous Liquid Interface Production (CLIP) process (2019). https://www.carbon3d.com/. Accessed 22 Jan 2019

18.

Ligon, S.C., Liska, R., Stampfl, J., Gurr, M., Mülhaupt, R.: Polymers for 3D printing and customized additive manufacturing. Chem. Rev. 117, 10212–10290 (2017). https://doi.org/10.1021/acs.chemrev.7b00074CrossRef

19.

Miller, A.T., Safranski, D.L., Wood, C., Guldberg, R.E., Gall, K.: Deformation and fatigue of tough 3D printed elastomer scaffolds processed by fused deposition modeling and continuous liquid interface production. J. Mech. Behav. Biomed. Mater. 75, 1–13 (2017). https://doi.org/10.1016/j.jmbbm.2017.06.038CrossRef

20.

Wang, F., Wang, F.: Liquid resins-based additive manufacturing. J. Mol. Eng. Mater. 5(05), 1740004 (2017). https://doi.org/10.1142/S2251237317400044CrossRef

21.

de Beer, M.P., van der Laan, H.L., Cole, M.A., Whelan, R.J., Burns, M.A., Scott, T.F.: Rapid, continuous additive manufacturing by volumetric polymerization inhibition patterning. Sci. Adv. 5, eaau8723 (2019). https://doi.org/10.1126/sciadv.aau8723

22.

HP Jet Fusion 3D Printing Solution. Reinventing prototyping and manufacturing, Hewlett-Packard Development Company (2016). http://www8.hp.com/us/en/pdf/printers/3d-printers/4AA6-4892ENA-P.pdf. Accessed 10 Oct 2017

23.

HP, HP METAL JET (2019). https://www8.hp.com/us/en/printers/3d-printers/metals.html. Accessed 22 Jan 2019

24.

Thomas, H.R., Hopkinson, N., Erasenthiran, P.: High speed sintering – continuing research into a new rapid manufacturing process. In: Proceedings of 17th Solid Freedom Fabrication Symposium, pp. 682–691 (2006). http://sffsymposium.engr.utexas.edu/2006TOC%0Ahttp://sffsymposium.engr.utexas.edu/Manuscripts/2006/2006-59-Thomas.pdf

25.

Hopkinson, N., Dickens, P.: Analysis of rapid manufacturing - using layer manufacturing processes for production. Proc. Inst. Mech. Eng. Part C J. Mech. Eng. Sci. (2003). https://doi.org/10.1243/095440603762554596

26.

Bennett, M.R.: High Speed Sintering, Loughborough University (2019). https://www.highspeedsinteringtechnology.com/about/. Accessed 23 Jan 2019

27.

3D System, DMP Factory 500 (2019). https://www.3dsystems.com/3d-printers/dmp-factory-500. Accessed 22 Jan 2019

28.

Skulan, D.: Practical guidance from design to production. 25 Years Automot. Part Supplied Conf. - Precis. Met. Assoc. (2018). https://www.pma.org/apsc/assets/presentations/Skulan.pdf. Accessed 26 Jan 2019

29.

Renishaw, RenAM 500Q (2017). https://www.renishaw.com/en/renam-500q--42781. Accessed 23 Jan 2019

30.

Stratasys, FORTUS 380MC Carbon Fiber Edition (2018). https://www.stratasys.com/3d-printers/fortus-380-carbon-fiber-edition. Accessed 22 Jan 2019

31.

Mark, G.: A Revolutionary New Way to Manufacture Metal Parts (2017). https://markforged.com/blog/adam/. Accessed 23 Jan 2019

32.

Markforged, Metal X (2017). https://markforged.com/metal-x/. Accessed 22 Jan 2019

33.

Markforged, The world’s strongest 3D printing materials (2019). https://markforged.com/materials/. Accessed 6 Jan 2019

34.

Scott, C.: Roboze Unveils the New ARGO 500 3D Printer at formnext (2017). https://3dprint.com/194165/roboze-argo-500-3d-printer/. Accessed 23 Jan 2019

35.

Roboze, Technology Engineering and research serving worldwide manufacturing (2019). https://www.roboze.com/en/technology.html. Accessed 22 Jan 2019

36.

Cicala, G., Pergolizzi, E., Piscopo, F., Carbone, D., Recca, G.: Hybrid composites manufactured by resin infusion with a fully recyclable bioepoxy resin. Compos. Part B Eng. 132, 69–76 (2018). https://doi.org/10.1016/j.compositesb.2017.08.015CrossRef

37.

Cicala, G., Latteri, A., Del Curto, B., Lo Russo, A., Recca, G., Farè, S.: Engineering thermoplastics for additive manufacturing: a critical perspective with experimental evidence to support functional applications. J. Appl. Biomater. Funct. Mater. 15, 10–18 (2017). https://doi.org/10.5301/jabfm.5000343CrossRef

38.

Jeanmonod, D.J., Rebecca, K., et al.: Suzuki, We are IntechOpen, the world’ s leading publisher of Open Access books Built by scientists, for scientists TOP 1% Control of a Proportional Hydraulic System. Intech Open. 2, 64 (2018). https://doi.org/10.5772/32009

39.

Regina, F., Lavecchia, F., Galantucci, L.M.: Preliminary study for a full colour low cost open source 3D printer, based on the combination of fused deposition modelling (FDM) or fused filament fabrication (FFF) and inkjet printing. Int. J. Interact. Des. Manuf. 12, 979–993 (2018). https://doi.org/10.1007/s12008-017-0432-xCrossRef

40.

Galantucci, L.M., Percoco, G., Spina, R.: Evaluation of rapid prototypes obtained from reverse engineering. Proc. Inst. Mech. Eng. Part B J. Eng. Manuf. 217, 1543–1552 (2003)

41.

Li, L., Li, C., Tang, Y., Du, Y.: An integrated approach of reverse engineering aided remanufacturing process for worn components. Robot. Comput. Integr. Manuf. 48, 39–50 (2017). https://doi.org/10.1016/j.rcim.2017.02.004CrossRef

42.

Wilson, J.M., Piya, C., Shin, Y.C., Zhao, F., Ramani, K.: Remanufacturing of turbine blades by laser direct deposition with its energy and environmental impact analysis. J. Clean. Prod. 80, 170–178 (2014). https://doi.org/10.1016/j.jclepro.2014.05.084CrossRef

43.

Gao, J., Chen, X., Yilmaz, O., Gindy, N.: An integrated adaptive repair solution for complex aerospace components through geometry reconstruction. Int. J. Adv. Manuf. Technol. 36, 1170–1179 (2008). https://doi.org/10.1007/s00170-006-0923-6CrossRef

44.

Xue, L., Donovan, M., Li, Y., Chen, J., Wang, S., Campbell, G.: Integrated rapid 3D mapping and laser additive repair of gas turbine engine components. In: 32nd International Congress on Applications of Lasers & Electro-Optics, ICALEO 2013, pp. 318–325 (2013)

45.

Heralić, A., Christiansson, A.K., Lennartson, B.: Height control of laser metal-wire deposition based on iterative learning control and 3D scanning. Opt. Lasers Eng. 50, 1230–1241 (2012). https://doi.org/10.1016/j.optlaseng.2012.03.016CrossRef

46.

Yilmaz, O., Gindy, N., Gao, J.: A repair and overhaul methodology for aeroengine components. Robot. Comput. Integr. Manuf. 26, 190–201 (2010). https://doi.org/10.1016/j.rcim.2009.07.001CrossRef

47.

Bovalino, Y.M.: ADDITIVE MANUFACTURING Secret Weapon: This Supersonic Blaster Rebuilds Jet Parts With Flying Powder (2017). https://www.ge.com/reports/secret-weapon-supersonic-blaster-rebuilds-jet-parts-flying-powder/. Accessed 23 Jan 2019

48.

Everton, S.K., Hirsch, M., Stravroulakis, P., Leach, R.K., Clare, A.T.: Review of in-situ process monitoring and in-situ metrology for metal additive manufacturing. JMADE 95, 431–445 (2016). https://doi.org/10.1016/j.matdes.2016.01.099CrossRef

49.

Galantucci, L.M., Guerra, M.G., Lavecchia, F.: Photogrammetry applied to small and micro scaled objects: a review (2018). https://doi.org/10.1007/978-3-319-89563-5_4

50.

Lavecchia, F., Guerra, M.G., Galantucci, L.M.: Performance verification of a photogrammetric scanning system for micro-parts using a three-dimensional artifact: adjustment and calibration. Int. J. Adv. Manuf. Technol. (2018). https://doi.org/10.1007/s00170-018-1806-3

51.

Wilm, J., Madruga, D.G., Jensen, J.N., Gregersen, S.S., Doest, M.E.B., Guerra, M.G., Aanæs, H., De Chiffre, L.: Effects of subsurface scattering on the accuracy of optical 3D measurements using miniature polymer step gauges. In: European Society for Precision Engineering and Nanotechnology, Conference and Proceedings - 18th International Conference and Exhibition on EUSPEN 2018, European Society for Precision Engineering and Nanotechnology, Venice, pp. 449–450 (2018). http://orbit.dtu.dk/en/publications/effects-of-subsurface-scattering-on-the-accuracy-of-optical-3d-measurements-using-miniature-polymer-step-gauges(4ec1fe50-e7eb-44ef-8def-6beda94b4d02).html

52.

Guerra, M.G., Volpone, C., Galantucci, L.M., Percoco, G.: Photogrammetric measurements of 3D printed microfluidic devices. Addit. Manuf. 21 (2018). https://doi.org/10.1016/j.addma.2018.02.013

53.

Cerardi, A., Meneghello, R., Concheri, G., Savio, G.: Form errors estimation in free-form 2D and 3D geometries. In: Proceedings of International Conference on Innovative Methods in Product Design, Venice, 15th–17th June, no. I (2011). https://www.researchgate.net/publication/232957835_Form_errors_estimation_in_free-form_2D_and_3D_geometries

54.

Galantucci, L.M., Lavecchia, F., Percoco, G.: Quantitative analysis of a chemical treatment to reduce roughness of parts fabricated using fused deposition modeling. CIRP Ann. - Manuf. Technol. 59, 247–250 (2010). https://doi.org/10.1016/j.cirp.2010.03.074CrossRef

55.

Jin, Y., Wan, Y., Zhang, B., Liu, Z.: Modeling of the chemical finishing process for polylactic acid parts in fused deposition modeling and investigation of its tensile properties. J. Mater. Process. Technol. 240, 233–239 (2017). https://doi.org/10.1016/j.jmatprotec.2016.10.003CrossRef

56.

Boschetto, A., Bottini, L.: Roughness prediction in coupled operations of fused deposition modeling and barrel finishing. J. Mater. Process. Technol. 219, 181–192 (2015). https://doi.org/10.1016/j.jmatprotec.2014.12.021CrossRef

57.

Thompson, A., Maskery, I., Leach, R.K.: X-ray computed tomography for additive manufacturing: a review. Int. J. Metrol. Qual. Eng. 8, 17 (2017)CrossRef

58.

Ford, S., Despeisse, M., Viljakainen, A.: Extending product life through additive manufacturing: the sustainability implications. In: Global Cleaner Production and Consumption Conference (2015). https://doi.org/10.13140/rg.2.1.4561.9282

59.

Despeisse, M., Ford, S.: The role of additive manufacturing in improving resource efficiency and sustainability. In: Umeda, S., Nakano, M., Mizuyama, H., Hibino, H., Kiritsis, D., von Cieminski, G. (eds.) Advances in Production Management Systems: Innovative Production Management Towards Sustainable Growth, pp. 129–136. Springer (2015)

60.

Sreenivasan, R., Bourell, D.L.: Sustainability study in selective laser sintering – an energy perspective. Minerals, Metals and Materials Society/AIME, 420 Commonwealth Dr., P. O. Box 430 Warrendale PA 15086 USA, 9 (2010)

61.

Bourell, D.L., Leu, M., Rosen, D.: Roadmap for additive manufacturing-Identifying the future of freeform processing, The Univer, Austin, Texas (2009). http://wohlersassociates.com/roadmap2009A.pdf

62.

Ford, S., Despeisse, M., Viljakainen, A.: Extending product life through additive manufacturing: the sustainability implications. Glob. Clean. Prod. Consum. Conf., 1–4 (2015). https://doi.org/10.13140/rg.2.1.4561.9282

63.

Despeisse, M., Baumers, M., Brown, P., Charnley, F., Ford, S.J., Garmulewicz, A., Knowles, S., Minshall, T.H.W., Mortara, L., Reed-Tsochas, F.P., Rowley, J.: Unlocking value for a circular economy through 3D printing: a research agenda. Technol. Forecast. Soc. Change. 115, 75–84 (2017). https://doi.org/10.1016/j.techfore.2016.09.021CrossRef

64.

Kerbrat, O., Le Bourhis, F., Mognol, P., Hascoët, J.-Y.: Environmental impact assessment studies in additive manufacturing. In: Muthu, S.S., Savalani, M.M. (eds.) Handbook of Sustainability in Additive Manufacturing, vol. 2, pp. 31–63. Springer, Singapore (2016)

65.

Faludi, J., Iribarne, M., Bayley, C., Bhogal, S.: Comparing environmental impacts of additive manufacturing vs traditional machining via life-cycle assessment. Rapid Prototyp. J. 21, 14–33 (2015). https://doi.org/10.1108/RPJ-07-2013-0067CrossRef

66.

Verma, A., Rai, R., DART Lab: Energy efficient modeling and optimization of additive manufacturing processes, p. 12

67.

Baumers, M., Tuck, C., Bourell, D.L., Sreenivasan, R., Hague, R.: Sustainability of additive manufacturing: measuring the energy consumption of the laser sintering process. Proc. Inst. Mech. Eng. Part B J. Eng. Manuf. 225, 2228–2239 (2011). https://doi.org/10.1177/0954405411406044CrossRef

68.

Meteyer, S., Xu, X., Perry, N., Zhao, Y.F.: Energy and material flow analysis of binder-jetting additive manufacturing processes. Procedia CIRP 15, 19–25 (2014). https://doi.org/10.1016/j.procir.2014.06.030CrossRef

69.

Huang, Y., Leu, M.C., Mazumder, J., Donmez, A.: Additive manufacturing: current state, future potential, gaps and needs, and recommendations. J. Manuf. Sci. Eng. 137, 014001–014001–014001–014010 (2015). https://doi.org/10.1115/1.4028725CrossRef

70.

Thomas, D.S., Gilbert, S.W.: Costs and Cost Effectiveness of Additive Manufacturing, National Institute of Standards and Technology (2014)

71.

Le Bourhis, F., Kerbrat, O., Dembinski, L., Hascoet, J.-Y., Mognol, P.: Predictive model for environmental assessment in additive manufacturing process. Procedia CIRP 15, 26–31 (2014). https://doi.org/10.1016/j.procir.2014.06.031CrossRef

Title: Additive Manufacturing: New Trends in the 4th Industrial Revolution
Authors: Luigi M. Galantucci
Maria Grazia Guerra
Michele Dassisti
Fulvio Lavecchia
Publisher: Springer International Publishing
Book: Proceedings of the 4th International Conference on the Industry 4.0 Model for Advanced Manufacturing
Print ISBN: 978-3-030-18179-6

Electronic ISBN: 978-3-030-18180-2

Copyright Year: 2019
DOI: https://doi.org/10.1007/978-3-030-18180-2_12

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Springer Professional "Wirtschaft"

Premium Partners