Top

Acta Mechanica

Published in:

08-07-2020 | Original Paper

Analytical solution of axisymmetric indentation of multi-layer coating on elastic substrate body

Authors: Kotaro Miura, Makoto Sakamoto, Yuji Tanabe

Published in: Acta Mechanica | Issue 10/2020

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

We consider the axisymmetric contact problem of a multi-elastic layer with various elastic constants bonded to an elastic semi-infinite substrate indented by rigid flat-ended cylindrical and spherical indenters. The transfer matrix method is applied to each elastic layer, and dual integral equations are reduced to an infinite system of simultaneous equations by expressing the normal contact stress at the surface elastic layer as an appropriate series with Chebyshev orthogonal polynomials. Numerical results demonstrate the effects of the elastic constant of each elastic layer and the semi-infinite elastic substrate on the radial distribution of the normal contact stress and normal displacement of the free surface of the elastic layer, stress singularity factor at the edge of the cylindrical indenter, and axial load of a rigid indenter which penetrates the multi-layer material to a constant depth. The results of axial load are in good agreement with previously reported results. The numerical results are given for several combinations of the shear modulus of each elastic layer and the substrate. These results will contribute to the establishment of indentation tests for composite materials and serve as guidelines for the design of appropriate mechanical properties of layered materials.

previous article An a priori error analysis of a Lord–Shulman poro-thermoelastic problem with microtemperatures

next article Characterization and dynamical stability of fully nonlinear strain solitary waves in a fluid-filled hyperelastic membrane tube

Available only for authorised users

Harding, J.W., Sneddon, I.N.: The elastic stresses produced by the indentation of the plane surface of a semi-infinite elastic solid by a rigid punch. Math. Proc. Camb. Philos. Soc. 41, 16 (1945). https://doi.org/10.1017/S0305004100022325MathSciNetCrossRefMATH

Sneddon, I.N.: The relation between load and penetration in the axisymmetric boussinesq problem for a punch of arbitrary profile. Int. J. Eng. Sci. 3, 47–57 (1965). https://doi.org/10.1016/0020-7225(65)90019-4MathSciNetCrossRefMATH

Muki, R.: Asymmetric problems of the theory of elasticity for a semi infinite solid and a thick plate. Prog. Solid Mech. 1, 399–439 (1960)MathSciNet

Lebedev, N.N., Ufliand, I.S.: Axisymmetric contact problem for an elastic layer. J. Appl. Math. Mech. 22, 442–450 (1958). https://doi.org/10.1016/0021-8928(58)90059-5MathSciNetCrossRefMATH

Hayes, W.C., Keer, L.M., Herrmann, G., Mockros, L.F.: A mathematical analysis for indentation tests of articular cartilage. J. Biomech. 5, 541–551 (1972). https://doi.org/10.1016/0021-9290(72)90010-3CrossRef

Argatov, I., Daniels, A.U., Mishuris, G., Ronken, S., Wirz, D.: Accounting for the thickness effect in dynamic spherical indentation of a viscoelastic layer: application to non-destructive testing of articular cartilage. Eur. J. Mech. A/Solids 37, 304–317 (2013). https://doi.org/10.1016/j.euromechsol.2012.07.004MathSciNetCrossRefMATH

Argatov, I.I., Sabina, F.J.: Asymptotic analysis of the substrate effect for an arbitrary indenter. Q. J. Mech. Appl. Math. 66, 75–95 (2013). https://doi.org/10.1093/qjmam/hbs020MathSciNetCrossRefMATH

Dhaliwal, R.S.: Punch problem for an elastic layer overlying an elastic foundation. Int. J. Eng. Sci. 8, 273–288 (1970). https://doi.org/10.1016/0020-7225(70)90058-3CrossRefMATH

Yu, H.Y., Sanday, S.C., Rath, B.B.: The effect of substrate on the elastic properties of films determined by the indentation test—axisymmetric boussinesq problem. J. Mech. Phys. Solids 38, 745–764 (1990). https://doi.org/10.1016/0022-5096(90)90038-6CrossRef

10.

Korsunsky, A.M., Constantinescu, A.: The influence of indenter bluntness on the apparent contact stiffness of thin coatings. Thin Solid Films 517, 4835–4844 (2009). https://doi.org/10.1016/j.tsf.2009.03.018CrossRef

11.

Keer, L.M., Kim, S.H., Eberhardt, A.W., Vithoontien, V.: Compliance of coated elastic bodies in contact. Int. J. Solids Struct. 27, 681–698 (1991). https://doi.org/10.1016/0020-7683(91)90028-ECrossRefMATH

12.

Sakamoto, M., Zhu, Q.F., Hara, T.: An axisymmetric contact problem of rigid spheres coated with transversely isotropic layers. Theor. Appl. Mech. Jpn. 44, 51–62 (1995)

13.

Gao, H., Chiu, C.H., Lee, J.: Elastic contact versus indentation modeling of multi-layered materials. Int. J. Solids Struct. 29, 2471–2492 (1992). https://doi.org/10.1016/0020-7683(92)90004-DCrossRef

14.

Argatov, I.: Frictionless and adhesive nanoindentation: asymptotic modeling of size effects. Mech. Mater. 42, 807–815 (2010). https://doi.org/10.1016/j.mechmat.2010.04.002CrossRef

15.

Volkov, S., Aizikovich, S., Wang, Y.S., Fedotov, I.: Analytical solution of axisymmetric contact problem about indentation of a circular indenter into a soft functionally graded elastic layer. Acta Mech. Sin. 29, 196–201 (2013). https://doi.org/10.1007/s10409-013-0022-5MathSciNetCrossRefMATH

16.

Selvadurai, A.P.S., Katebi, A.: An adhesive contact problem for an incompressible non-homogeneous elastic halfspace. Acta Mech. 226, 249–265 (2015). https://doi.org/10.1007/s00707-014-1171-8MathSciNetCrossRefMATH

17.

Liu, T.J., Wang, Y.S., Xing, Y.M.: Fretting contact of two elastic solids with graded coatings under torsion. Int. J. Solids Struct. 49, 1283–1293 (2012). https://doi.org/10.1016/j.ijsolstr.2012.02.011CrossRef

18.

Liu, T.J., Wang, Y.S., Xing, Y.M.: The axisymmetric partial slip contact problem of a graded coating. Meccanica 47, 1673–1693 (2012). https://doi.org/10.1007/s11012-012-9547-0MathSciNetCrossRefMATH

19.

Liu, T.J., Wang, Y.S., Zhang, C.: Axisymmetric frictionless contact of functionally graded materials. Arch. Appl. Mech. 78, 267–282 (2008). https://doi.org/10.1007/s00419-007-0160-yCrossRefMATH

20.

Liu, T.J., Xing, Y.M.: Analysis of graded coatings for resistance to contact deformation and damage based on a new multi-layer model. Int. J. Mech. Sci. 81, 158–164 (2014). https://doi.org/10.1016/j.ijmecsci.2014.02.009CrossRef

21.

Constantinescu, A., Korsunsky, A.M., Pison, O., Oueslati, A.: Symbolic and numerical solution of the axisymmetric indentation problem for a multilayered elastic coating. Int. J. Solids Struct. 50, 2798–2807 (2013). https://doi.org/10.1016/j.ijsolstr.2013.04.017CrossRef

22.

Wei, Y., Ji, Y., Weiqiu, C.: A three-dimensional solution for laminated orthotropic rectangular plates with viscoelastic interfaces. Acta Mech. Solida Sin. 19, 181–188 (2006). https://doi.org/10.1007/s10338-006-0622-8CrossRef

23.

Ai, Z.Y., Zhang, Y.F.: The analysis of a rigid rectangular plate on a transversely isotropic multilayered medium. Appl. Math. Model. 39, 6085–6102 (2015). https://doi.org/10.1016/j.apm.2015.01.054MathSciNetCrossRefMATH

24.

Stan, G., Adams, G.G.: Adhesive contact between a rigid spherical indenter and an elastic multi-layer coated substrate. Int. J. Solids Struct. 87, 1–10 (2016). https://doi.org/10.1016/j.ijsolstr.2016.02.043CrossRef

25.

Zhang, H., Wang, W., Zhang, S., Zhao, Z.: Semi-analytical solution of three-dimensional steady state thermoelastic contact problem of multilayered material under friction heating. Int. J. Therm. Sci. 127, 384–399 (2018). https://doi.org/10.1016/j.ijthermalsci.2018.02.006CrossRef

26.

Miura, K., Sakamoto, M., Kobayashi, K.: Analytical solution of axisymmetric indentation of an elastic layer-substrate body. Theor. Appl. Mech. Jpn. 64, 81–101 (2018)

27.

Miura, K., Sakamoto, M., Kobayashi, K., Pramudita, J.A., Tanabe, Y.: An analytical solution for the axisymmetric problem of a penny-shaped crack in an elastic layer sandwiched between dissimilar materials. Mech. Eng. J. 5, 18-00125–18–00125 (2018). https://doi.org/10.1299/mej.18-00125CrossRef

28.

Love, A.E.H.: A Treatise on the Mathematical Theory of Elasticity. Cambridge University Press, Cambridge (1927)MATH

29.

Bateman, H.: Tables of Integral Transforms. McGraw-Hill, New York (1954)

30.

Moriguchi, S., Udagawa, K., Hitomatsu, S.: Mathematical Formulas, vol. 3. Iwanami, Tokyo (1987). (in Japanese)

Title: Analytical solution of axisymmetric indentation of multi-layer coating on elastic substrate body
Authors: Kotaro Miura
Makoto Sakamoto
Yuji Tanabe
Publication date: 08-07-2020
Publisher: Springer Vienna
Published in: Acta Mechanica / Issue 10/2020
Print ISSN: 0001-5970
Electronic ISSN: 1619-6937
DOI: https://doi.org/10.1007/s00707-020-02752-1

Springer Professional

Analytical solution of axisymmetric indentation of multi-layer coating on elastic substrate body

Abstract

Premium Partners

Springer Professional

Abstract

Please log in to get access to your license.

Other articles of this Issue 10/2020

Theoretical analysis and experimental measurement of coupling dynamic characteristics for transversely isotropic rectangular plate based on modified FSDT assumption

Active tunability of band gaps for a novel elastic metamaterial plate

Evaluation of the integrals of Green’s function of Lamb’s model used in contact problems

Sensitivity analysis of statistical energy analysis models based on interval perturbation approach

Vibrational analysis of Love waves in a viscoelastic composite multilayered structure

A microstructure-dependent anisotropic magneto-electro-elastic Mindlin plate model based on an extended modified couple stress theory

Premium Partners