Top

The International Journal of Advanced Manufacturing Technology

Published in:

04-01-2021 | ORIGINAL ARTICLE

Applying fuzzy grey relationship analysis and Taguchi method in polishing surfaces of magnetic materials by using magnetorheological fluid

Authors: Duytrinh Nguyen, Jinzhong Wu, Nguyen Minh Quang, Le Anh Duc, Phung Xuan Son

Published in: The International Journal of Advanced Manufacturing Technology | Issue 5-6/2021

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

With the development of mould manufacturing industry, the high precision polishing technologies of Ni–P-coated SKD11 steel are in high demand. In this work, the factors influencing the magnetic material polishing process were determined by investigating the force distribution of carbonyl iron (CIPs) and abrasive particles (APs) in the working surface of magnetorheological fluid (MRF). The influence of certain factors, such as the diameters of the CIPs and the APs and the current and working distance (K), on the polishing surface quality, was assessed by fuzzy grey and Taguchi analysis. Results showed that the values of the fuzzy grey relationships with the surface quality of the factors were 0.4914, 0.7797, 0.6686 and 0.7461. Result showed that the fuzzy grey relationship point of factors known as diameters of the AGs had the most remarkable influence on the polishing effect, and the effect of CIP diameter was insignificant. The MRF contained commercially available CIPs that had been successfully applied for polishing the surface of magnetic materials with extremely high accuracy (surface roughness Ra = 0.561 nm) without leaving scratches on the surface after polishing.

previous article Tribology performance of laser-peened MB8 magnesium alloy under different working conditions

next article Residual stress homogenization of SiCP/Al composites with thermal vibration coupling

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Lan X, Li C, Yang L, Xue C (2018) Deformation analysis and improvement method of the Ni-P mold core in the injection molding process. Int J Adv Manuf Technol 99(9–12):2659–2668. https://doi.org/10.1007/s00170-018-2584-7CrossRef

Liu Y, Zhao W, Zhou T, Liu X, Wang X (2017) Surface defect elimination in microgrooving of electroless nickel phosphide plating layer by brittleness enhancement. Int J Adv Manuf Technol 94(1–4):1327–1333. https://doi.org/10.1007/s00170-017-0940-7CrossRef

Lin Z-C, Lai W-L, Lin HY, Liu CR (1997) Residual stresses with different tool flank wear lengths in the ultra-precision machining of Ni-P alloys. J Mater Process Technol 65(1):116–126. https://doi.org/10.1016/0924-0136(95)02251-1CrossRef

Dai C, Yin Z, Ding W, Zhu Y (2019) Grinding force and energy modeling of textured monolayer CBN wheels considering undeformed chip thickness nonuniformity. Int J Mech Sci 157–158:221–230. https://doi.org/10.1016/j.ijmecsci.2019.04.046CrossRef

Zhao B, Ding W, Chen Z, Yang C (2019) Pore structure design and grinding performance of porous metal-bonded CBN abrasive wheels fabricated by vacuum sintering. J Manuf Process 44:125–132. https://doi.org/10.1016/j.jmapro.2019.06.001CrossRef

Wang J, Ding W, Zhu Y, Fu Y (2019) Micro-fracture variation and grinding performance of PCBN superabrasive grains in high-speed grinding. Int J Mech Sci 160:15–25. https://doi.org/10.1016/j.ijmecsci.2019.06.021CrossRef

Tian F, Li Z, Lv C, Liu G (2016) Polishing pressure investigations of robot automatic polishing on curved surfaces. Int J Adv Manuf Technol 87(1–4):639–646. https://doi.org/10.1007/s00170-016-8527-2CrossRef

Han G, Zhao J, Wang X (2016) Research on unbounded abrasive polishing process with assisted ultrasonic vibration of workpiece. Int J Adv Manuf Technol 88(1–4):209–218. https://doi.org/10.1007/s00170-016-8767-1CrossRef

Liang H, Yan Q, Lu J, Luo B, Xiao X (2019) Material removal mechanisms in chemical-magnetorheological compound finishing. Int J Adv Manuf Technol 103(1–4):1337–1348. https://doi.org/10.1007/s00170-019-03594-5CrossRef

10.

Jain VK, Saren KK, Raghuram V, Sankar MR (2016) Force analysis of magnetic abrasive nano-finishing of magnetic and non-magnetic materials. Int J Adv Manuf Technol 100(5–8):1137–1147. https://doi.org/10.1007/s00170-016-8954-0CrossRef

11.

Guo H, Wu Y (2015) Ultrafine polishing of optical polymer with zirconia-coated carbonyl-iron-particle-based magnetic compound fluid slurry. Int J Adv Manuf Technol 85(1–4):253–261. https://doi.org/10.1007/s00170-015-7929-xCrossRef

12.

Barylski A, Piotrowski N (2018) Non-conventional approach in single-sided lapping process: kinematic analysis and parameters optimization. Int J Adv Manuf Technol 100(1–4):589–598. https://doi.org/10.1007/s00170-018-2644-zCrossRef

13.

Chebbi R (2016) Bingham fluid contact line dynamics. J Adhes Sci Technol 30(15):1681–1688. https://doi.org/10.1080/01694243.2016.1158344CrossRef

14.

Singh M, Srivastava A, Bhunia D (2017) Evaluation of marble slurry incorporated concrete using nondestructive methods. Mater Today Proc 4(9):9842–9845. https://doi.org/10.1016/j.matpr.2017.06.278CrossRef

15.

Furuya T, Wu Y, Nomura M, Shimada K, Yamamoto K (2008) Fundamental performance of magnetic compound fluid polishing liquid in contact-free polishing of metal surface. J Mater Process Technol 201(1):536–541. https://doi.org/10.1016/j.jmatprotec.2007.11.299CrossRef

16.

Guan F, Hu H, Li S, Liu Z, Peng X, Shi F (2018) A novel Lap-MRF method for large aperture mirrors. Int J Adv Manuf Technol 95(9–12):4645–4657. https://doi.org/10.1007/s00170-017-1498-0CrossRef

17.

Wang Y, Yin S, Hu T (2018) Ultra-precision finishing of optical mold by magnetorheological polishing using a cylindrical permanent magnet. Int J Adv Manuf Technol 97(9-12):3583–3594. https://doi.org/10.1007/s00170-018-2199-zCrossRef

18.

Wu J, Zou Y, Sugiyama H (2015) Study on ultra-precision magnetic abrasive finishing process using low frequency alternating magnetic field. J Magn Magn Mater 386:50–59. https://doi.org/10.1016/j.jmmm.2015.03.041CrossRef

19.

Liang H, Lu J, Pan J, Yan Q (2017) Material removal process of single-crystal SiC in chemical-magnetorheological compound finishing. Int J Adv Manuf Technol 94(5–8):2939–2948. https://doi.org/10.1007/s00170-017-1098-zCrossRef

20.

Wu J, Yin S, Xing B, Zou Y (2019) Effect of magnetic pole on finishing characteristics in low-frequency alternating magnetic field for micro-groove surface. Int J Adv Manuf Technol 104(9–12):4745–4755. https://doi.org/10.1007/s00170-019-04362-1CrossRef

21.

Jiao L, Wu Y, Wang X, Guo H, Liang Z (2013) Fundamental performance of Magnetic Compound Fluid (MCF) wheel in ultra-fine surface finishing of optical glass. Int J Mach Tools Manuf 75:109–118. https://doi.org/10.1016/j.ijmachtools.2013.09.003CrossRef

22.

Wang Y, Wu Y, Nomura M (2016) Feasibility study on surface finishing of miniature V-grooves with magnetic compound fluid slurry. Precis Eng 45:67–78. https://doi.org/10.1016/j.precisioneng.2016.01.010CrossRef

23.

Barman A, Das M (2018) Nano-finishing of bio-titanium alloy to generate different surface morphologies by changing magnetorheological polishing fluid compositions. Precis Eng 51:145–152. https://doi.org/10.1016/j.precisioneng.2017.08.003CrossRef

24.

Dabholkar A, Sundaram MM (2012) Study of micro-abrasive tool-making by pulse plating using Taguchi method. Mater Manuf Process 27(11):1233–1238. https://doi.org/10.1080/10426914.2012.663143CrossRef

25.

Yin S, Nguyen D, Chen F, Tang Q, Duc LA (2018) Application of compressed air in the online monitoring of surface roughness and grinding wheel wear when grinding Ti-6Al-4V titanium alloy. Int J Adv Manuf Technol 101(5–8):1315–1331. https://doi.org/10.1007/s00170-018-2909-6CrossRef

26.

Kadier A, Abdeshahian P, Simayi Y, Ismail M, Hamid AA, Kalil MS (2015) Grey relational analysis for comparative assessment of different cathode materials in microbial electrolysis cells. Energy 90:1556–1562. https://doi.org/10.1016/j.energy.2015.06.108CrossRef

27.

Kasman Ş (2013) Multi-response optimization using the Taguchi-based grey relational analysis: a case study for dissimilar friction stir butt welding of AA6082-T6/AA5754-H111. Int J Adv Manuf Technol 68(1-4):795–804. https://doi.org/10.1007/s00170-012-4720-0CrossRef

28.

Singh S (2012) Optimization of machining characteristics in electric discharge machining of 6061Al/Al2O3p/20P composites by grey relational analysis. Int J Adv Manuf Technol 63(9–12):1191–1202. https://doi.org/10.1007/s00170-012-3984-8CrossRef

29.

Li G-D, Yamaguchi D, Nagai M (2007) A grey-based rough decision-making approach to supplier selection. Int J Adv Manuf Technol 36(9–10):1032–1040. https://doi.org/10.1007/s00170-006-0910-yCrossRef

30.

Abhang LB, Hameedullah M (2012) Determination of optimum parameters for multi-performance characteristics in turning by using grey relational analysis. Int J Adv Manuf Technol 63(1–4):13–24. https://doi.org/10.1007/s00170-011-3857-6CrossRef

31.

Younas M, Jaffery SHI, Khan M, Khan MA, Ahmad R, Mubashar A, Ali L (2019) Multi-objective optimization for sustainable turning Ti6Al4V alloy using grey relational analysis (GRA) based on analytic hierarchy process (AHP). Int J Adv Manuf Technol 105(1):1175–1188. https://doi.org/10.1007/s00170-019-04299-5CrossRef

Title: Applying fuzzy grey relationship analysis and Taguchi method in polishing surfaces of magnetic materials by using magnetorheological fluid
Authors: Duytrinh Nguyen
Jinzhong Wu
Nguyen Minh Quang
Le Anh Duc
Phung Xuan Son
Publication date: 04-01-2021
Publisher: Springer London
Published in: The International Journal of Advanced Manufacturing Technology / Issue 5-6/2021
Print ISSN: 0268-3768
Electronic ISSN: 1433-3015
DOI: https://doi.org/10.1007/s00170-020-06567-1

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 5-6/2021

Milling stability prediction based on the hybrid interpolation scheme of the Newton and Lagrange polynomials

Stability of micro-milling thin-walled part process

Parameterized multipoint-line analytical modeling of a mobile heat source for thermal field prediction in laser beam welding

A novel method with Newton polynomial-Chebyshev nodes for milling stability prediction

Simulation of sheet metal forming processes by presenting a bending-dependent inverse isogeometric methodology

STEP/STEP-NC-compliant manufacturing information of 3D printing for FDM technology

Premium Partners