Top

The International Journal of Advanced Manufacturing Technology

Published in:

04-08-2021 | Critical Review

Assessment of researches and case studies on Cloud Manufacturing: a bibliometric analysis

Authors: Daniel Alexandre Morelli, Paulo Sergio de Arruda Ignacio

Published in: The International Journal of Advanced Manufacturing Technology | Issue 3-4/2021

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

Cloud computing technology has been studied in the context of industry 4.0 as a tool applied to manufacturing services and resources. Such concept is widely known as Cloud Manufacturing. This paper aims at mapping the current state of academic researches on this field, promoting the understanding of trends, references and practical applications in real-life conditions. A bibliometric analysis was conducted using two different databases — Scopus and Web of Sciences — and VOSviewer’s text mining tools and techniques. From a sample of 1420 papers, this study identified the countries which had the largest volume of publications, the main journals related to the subject, the most influent articles, and four clusters by keywords occurrences: (i) “Optimization of manufacturing processes”, (ii) “Collaborative networks of manufacturing resources and services”, (iii) “Industry 4.0 and cloud computing systems”, and (iv) “Data reliability and cyber-security”. Finally, this work selected and analyzed the 159 articles with applied case studies, in order to stratify and to understand the most common approaches within the four pre-established categories. This article can contribute to researchers and developers searching for successful practical applications in digitalization of manufacturing chains, as well as to those who are looking for gaps in the still unexplored fields of Cloud Manufacturing. Both the assessment and the categorization of the case studies about Cloud Manufacturing are the differentials in this article.

next article A review on wire-arc additive manufacturing: typical defects, detection approaches, and multisensor data fusion-based model

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Benitez GB, Lima MJDRF, Lerman LV, Frank AG (2019) Understanding Industry 4.0: Definitions And insights from a cognitive map analysis. Brazil J Oper Prod Manag [recurso eletrônico]. Rio de Janeiro 16(2):192–200. https://doi.org/10.14488/BJOPM.2019.v16.n2.a3CrossRef

Charro A, Schaefer D (2018) Cloud Manufacturing as a new type of Product-Service System. Int J Comput Integr Manuf 31(10):1018–1033. https://doi.org/10.1080/0951192x.2018.1493228CrossRef

Wu D, Greer MJ, Rosen DW, Schaefer D (2013) Cloud manufacturing: Strategic vision and state-of-the-art. J Manuf Syst 32(4):564–579. https://doi.org/10.1016/j.jmsy.2013.04.008CrossRef

da Silva Bonifácio E, Singnorete NA, de Arruda Ignácio PS, Stoco WH (2020) Integração entre fornecedor e varejista para gestão de estoque através da tecnologia cloud-uma proposta para melhorar a performance do fluxo de informações. Brazil J Bus 2(3):2049–2056. https://doi.org/10.34140/bjbv2n3-014CrossRef

Li B, Zhang L, Wang S, Tao F, et al. (2010) Cloud manufacturing: a new service-oriented networked manufacturing model. Comput Integr Manuf Syst 16(1):1–7

Marston S, Li Z, Bandyopadhyay S, Zhang J, Ghalsasi A (2011) Cloud computing—The business perspective. Decis Support syst 51(1):176–189. https://doi.org/10.1109/HICSS.2011.102CrossRef

Sala-Zárate M, Colombo-Mendoza L (2012) Cloud computing: a review of PAAS, IAAS, SAAS services and providers. Lámpsakos, (7):47–57. https://doi.org/10.21501/21454086.844

Xu X (2012) From cloud computing to cloud manufacturing. Robot Comput-Integr Manuf 28 (1):75–86. https://doi.org/10.1016/j.rcim.2011.07.002CrossRef

Tao F, Cheng Y, Da Xu L, Zhang L, Li B (2014) CCIOt-CMfg: cloud computing and internet of things-based cloud manufacturing service system. IEEE Trans Indust Inform 10(2):1435–1442. https://doi.org/10.1109/TII.2014.2306383CrossRef

10.

Zhang L, Luo Y, Tao F, Li B, et al. (2014) Cloud manufacturing: a new manufacturing paradigm. Enterprise Inf Syst 8(2):167–187. https://doi.org/10.1080/17517575.2012.683812CrossRef

11.

Wang XV, Xu X (2013) An interoperable solution for cloud manufacturing. Robot Comput-Integr Manuf 29(4):232–247. https://doi.org/10.1016/j.rcim.2013.01.005CrossRef

12.

Tao F, Zuo Y, Da Xu L, Zhang L (2014) Iot-based intelligent perception and access of manufacturing resource toward cloud manufacturing. IEEE Trans Indust Inform 10(2):1547–1557. https://doi.org/10.1109/TII.2014.2306397CrossRef

13.

Tao F, Zhang L, Venkatesh VC, Luo Y, Cheng Y (2011) Cloud manufacturing: a computing and service-oriented manufacturing model. Proc Inst Mech Eng Part B: J Eng Manuf 225(10):1969–1976. https://doi.org/10.1177/0954405411405575CrossRef

14.

Gao R, Wang L, Teti R, Dornfeld D, Kumara S, Mori M, Helu M (2015) Cloud-enabled prognosis for manufacturing. CIRP Ann 64(2):749–772. https://doi.org/10.1016/j.cirp.2015.05.011CrossRef

15.

Camatti JA, Arthus MG, Silva AL, Cesar FIG, Ignacio PSA (2016) O impacto da produção enxuta no desempenho dos trabalhadores: uma análise bibliométrica. VI Congresso Brasileiro de Engenharia de Produç,ão, APREPRO, Anais VI 2016

16.

Yang GY, Wang L, Ren J, Zhang Y, et al. (2015) Evidence base of clinical studies on Tai Chi: a bibliometric analysis. PloS one 10(3):e0120655. https://doi.org/10.1371/journal.pone.0120655CrossRef

17.

Van Eck NJ, Waltman L (2010) Software survey: VOSviewer, a computer program for bibliometric mapping. Scientometrics 84(2):523–538. https://doi.org/10.1007/s11192-009-0146-3CrossRef

18.

De Oliveira RI, Sousa SO, De Campos FC (2019) Lean manufacturing implementation: bibliometric analysis 2007–2018. Int J Adv Manuf Technol 101(1):979–988. https://doi.org/10.1007/s00170-018-2965-y

19.

Pyramids Population of the World (2020), https://www.populationpyramid.net/, Accessed: February 9, 2021

20.

Scimago Institutions Ranking (2020), Journal Rankings, powered by SCOPUS, https://www.scimagojr.com/journalrank.php, Accessed: February 10, 2021

21.

Wang L, Törngren M, Onori M (2015) Current status and advancement of cyber-physical systems in manufacturing. J Manuf Syst 37:517–527. https://doi.org/10.1016/j.jmsy.2015.04.008CrossRef

22.

Tao F, LaiLi Y, Xu L, Zhang L (2012) FC-PACO-RM: A parallel method for service composition optimal-selection in cloud manufacturing system. IEEE Trans Indust Inform 9(4):2023–2033. https://doi.org/10.1109/TII.2012.2232936CrossRef

23.

Babiceanu RF, Seker R (2016) Big Data and virtualization for manufacturing cyber-physical systems: A survey of the current status and future outlook. Comput Ind 81:128–137. https://doi.org/10.1016/j.compind.2016.02.004CrossRef

24.

Tao F, Cheng Y, Zhang L, Nee AY (2017) Advanced manufacturing systems: socialization characteristics and trends. J Intell Manuf 28(5):1079–1094. https://doi.org/10.1007/s10845-015-1042-8CrossRef

25.

Ren L, Zhang L, Wang L, Tao F, Chai X (2017) Cloud manufacturing: key characteristics and applications. Int J Comput Integr Manuf 30(6):501–515. https://doi.org/10.1080/0951192X.2014.902105CrossRef

26.

He W, Xu L (2015) A state-of-the-art survey of cloud manufacturing. Int J Comput Integr Manuf 28(3):239–250. https://doi.org/10.1080/0951192X.2013.874595CrossRef

27.

Qu T, Lei SP, Wang Z, et al. (2016) Iot-based real-time production logistics synchronization system under smart cloud manufacturing. Int J Adv Manuf Technol 84(1-4):147–164. https://doi.org/10.1007/s00170-015-7220-1CrossRef

28.

Ren L, Zhang L, Tao F, et al. (2015) Cloud manufacturing: from concept to practice. Enterprise Inf Syst 9(2):186–209. https://doi.org/10.1080/17517575.2013.839055CrossRef

29.

Huang B, Li C, Yin C, Zhao X (2013) Cloud manufacturing service platform for small-and medium-sized enterprises. Int J Adv Manuf Technol 65(9-12):1261–1272. https://doi.org/10.1007/s00170-012-4255-4CrossRef

30.

Valizadeh S, Fatahi Valilai O, Houshmand M (2020) Flexible flow line scheduling considering machine eligibility in a digital dental laboratory. Int J Prod Res 58 (21):6513–6531. https://doi.org/10.1080/00207543.2019.1683247CrossRef

31.

Simeone A, Zeng Y, Caggiano A (2020) Intelligent decision-making support system for manufacturing solution recommendation in a cloud framework. Int J Adv Manuf Technol:1–16. https://doi.org/10.1007/s00170-020-06389-1

32.

Wang L, Guo S, Li X, Du B, Xu W (2018) Distributed manufacturing resource selection strategy in cloud manufacturing. Int J Adv Manuf Technol 94(9):3375–3388. https://doi.org/10.1007/s00170-016-9866-8CrossRef

33.

Liu Y, Xu X, Zhang L, Tao F (2016) An extensible model for multitask-oriented service composition and scheduling in cloud manufacturing. J Comput Inf Sci Eng 16(4). https://doi.org/10.1115/1.4034186

34.

Simeone A, Deng B, Caggiano A (2020) Resource efficiency enhancement in sheet metal cutting industrial networks through cloud manufacturing. Int J Adv Manuf Technol 107(3):1345–1365. https://doi.org/10.1007/s00170-020-05083-6CrossRef

35.

Li X, Yin C, Liu F (2017) A trust estimation method of machine tool resources in the cloud environment. J Stat Comput Simul 87(13):2572–2580. https://doi.org/10.1080/00949655.2017.1349130MathSciNetMATHCrossRef

36.

Mourtzis D, Vlachou E, Milas N, Tapoglou N, Mehnen J (2019) A cloud-based, knowledge-enriched framework for increasing machining efficiency based on machine tool monitoring. Proc Inst Mech Eng Part B: J Eng Manuf 233(1):278–292. https://doi.org/10.1177/0954405417716727CrossRef

37.

Yang Y, Yang B, Wang S, Liu W, Jin T (2019) An improved grey wolf optimizer algorithm for energy-aware service composition in cloud manufacturing. Int J Adv Manuf Technol 105(7):3079–3091. https://doi.org/10.1007/s00170-019-04449-9CrossRef

38.

Zhou L, Zhang L, Zhao C, Laili Y, Xu L (2018) Diverse task scheduling for individualized requirements in cloud manufacturing. Enterprise Inf Syst 12(3):300–318. https://doi.org/10.1080/17517575.2017.1364428CrossRef

39.

Ren M, Ren L, Jain H (2018) Manufacturing service composition model based on synergy effect: a social network analysis approach. Appl Soft Comput 70:288–300. https://doi.org/10.1016/j.asoc.2018.05.039CrossRef

40.

Zhao C, Luo X, Zhang L (2020) Modeling of service agents for simulation in cloud manufacturing. Robot Comput Integr Manuf 64(101910). https://doi.org/10.1016/j.rcim.2019.101910

41.

Li B, Liu S, Guo Y, Du Z, Lei Z, Ding Z (2020) Multi-Core And Cross-Chain evaluation method based on Multi-Core mesh collaboration relationship. IEEE Access 8:151829–151846. https://doi.org/10.1109/ACCESS.2020.3014212CrossRef

42.

Argoneto P, Renna P (2016) Supporting capacity sharing in the cloud manufacturing environment based on game theory and fuzzy logic. Enterprise Inf Syst 10(2):193–210. https://doi.org/10.1080/17517575.2014.928950CrossRef

43.

Cai X, Li W, He F, Li X (2015) Customized encryption of computer aided design models for collaboration in cloud manufacturing environment. J Manuf Sci Eng 137(4). https://doi.org/10.1115/1.4030592

44.

Cheng Y, Tao F, Zhao D, Zhang L (2017) Modeling of manufacturing service supply–demand matching hypernetwork in service-oriented manufacturing systems. Robot Comput Integr Manuf 45:59–72. https://doi.org/10.1016/j.rcim.2016.05.007CrossRef

45.

Wang XV, Wang L (2017) A cloud-based production system for information and service integration: an internet of things case study on waste electronics. Enterprise Inf Syst 11(7):952–968. https://doi.org/10.1080/17517575.2016.1215539CrossRef

46.

Zhang C, Zhao F, Wang Z (2019) Modeling of cloud 3D printing service Hyper-Network in Service-Oriented manufacturing systems. IEEE Access 8:16225–16235. https://doi.org/10.1109/ACCESS.2019.2962248CrossRef

47.

Rasouli MR (2020) An architecture for IoT-enabled intelligent process-aware cloud production platform: a case study in a networked cloud clinical laboratory. Int J Prod Res 58(12):3765–3780. https://doi.org/10.1080/00207543.2019.1634847CrossRef

48.

Li Z, Barenji AV, Huang GQ (2018) Toward a blockchain cloud manufacturing system as a peer to peer distributed network platform. Robot Comput-Integr Manuf 54:133–144. https://doi.org/10.1016/j.rcim.2018.05.011CrossRef

49.

Zhu X, Shi J, Huang S, Zhang B (2020) Consensus-oriented cloud manufacturing based on blockchain technology: an exploratory study. Pervas Mob Comput 62(101113). https://doi.org/10.1016/j.pmcj.2020.101113

50.

Yu C, Zhang L, Zhao W, Zhang S (2020) A blockchain-based service composition architecture in cloud manufacturing. Int J Comput Integr Manuf 33(7):701–715. https://doi.org/10.1080/0951192X.2019.1571234CrossRef

51.

Nguyen NT, Leu MC, Liu XF (2018) RTEThernet: Real-time communication for manufacturing cyberphysical systems. Trans Emerg Telecommun Technol 29(7):e3433. https://doi.org/10.1002/ett.3433

52.

Cao Y, Wang S, Kang L, Gao Y (2016) A TQCS-based service selection and scheduling strategy in cloud manufacturing. Int J Adv Manuf Technol 82(1-4):235–251. https://doi.org/10.1007/s00170-015-7350-5CrossRef

53.

Xu W, Tian S, Liu Q, Xie Y, Zhou Z, Pham DT (2016) An improved discrete bees algorithm for correlation-aware service aggregation optimization in cloud manufacturing. Int J Adv Manuf Technol 84(1-4):17–28. https://doi.org/10.1007/s00170-015-7738-2CrossRef

54.

Hu Y, Zhu F, Zhang L, Lui Y, Wang Z (2019) Scheduling of manufacturers based on chaos optimization algorithm in cloud manufacturing. Robot Comput Integr Manuf 58:13–20. https://doi.org/10.1016/j.rcim.2019.01.010CrossRef

55.

Luo Y, Zhang L, Tao F, Ren L, Liu Y, Zhang Z (2013) A modeling and description method of multidimensional information for manufacturing capability in cloud manufacturing system. Int J Adv Manuf Technol 69(5-8):961–975. https://doi.org/10.1007/s00170-013-5076-9CrossRef

56.

Yu Y, Xu W (2020) Optimized configuration of manufacturing resources for middle and lower batch customization enterprises in cloud manufacturing environment. Complexity 2020. https://doi.org/10.1155/2020/5619758

57.

Chen T, Wang YC (2016) Estimating simulation workload in cloud manufacturing using a classifying artificial neural network ensemble approach. Robot Comput Integr Manuf 38:42–51. https://doi.org/10.1016/j.rcim.2015.09.011CrossRef

58.

Liu YK, Zhang XS, Zhang L, Tao F, Wang LH (2019) A multi-agent architecture for scheduling in platform-based smart manufacturing systems. Front Inf Technol Electron Eng 20(11):1465–1492. https://doi.org/10.1631/FITEE.1900094CrossRef

59.

Zhou L, Zhang L, Ren L, Wang J (2019) Real-time scheduling of cloud manufacturing services based on dynamic data-driven simulation. IEEE Trans Ind Inf 15(9):5042–5051. https://doi.org/10.1109/TII.2019.2894111CrossRef

60.

Jiang H, Liu CY (2019) Scheduling optimization of cloud resource supply chain through Multi-Objective particle swarm optimization. Int J Simul Modell 18(1):163–174. https://doi.org/10.2507/IJSIMM18(1)CO3MathSciNetCrossRef

61.

Talhi E, Huet JC, Fortineau V, Lamouri S (2020) A methodology for cloud manufacturing architecture in the context of Industry 4.0. Bullet Polish Acad Sci Techn Sci 68(2). https://doi.org/10.24425/bpasts.2020.131849

62.

Tao F, Cheng J, Cheng Y, Gu S, Zheng T, Yang H (2017) SDMSIm: a manufacturing service supply–demand matching simulator under cloud environment. Robot Comput-Integr Manuf 45:34–46. https://doi.org/10.1016/j.rcim.2016.07.001CrossRef

63.

Liang H, Sun L (2019) Improve cloud manufacturing supply chain note-enterprises optimize combination of the Cuckoo search. Concurr Comput Pract Exper 31(10):e4764. https://doi.org/10.1002/cpe.4764CrossRef

64.

Lojka T, Bundzel M, Zolotová I. (2016) Service-oriented architecture and cloud manufacturing. Acta Polytech Hungarica 13(6):25–44. https://doi.org/10.12700/aph.13.6.2016.6.2

65.

Li C, Zhang M, He H, Li C, Chang Y, Shang Y (2015) Research of Improved ZigBee-based AODVjr Routing Algorithm in Cloud Manufacturing. Int J Online Eng 11(2). https://doi.org/10.3991/ijoe.v11i2.4252

Title: Assessment of researches and case studies on Cloud Manufacturing: a bibliometric analysis
Authors: Daniel Alexandre Morelli
Paulo Sergio de Arruda Ignacio
Publication date: 04-08-2021
Publisher: Springer London
Published in: The International Journal of Advanced Manufacturing Technology / Issue 3-4/2021
Print ISSN: 0268-3768
Electronic ISSN: 1433-3015
DOI: https://doi.org/10.1007/s00170-021-07782-0

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 3-4/2021

Investigation of the wear behavior of abrasive grits in a dry machining Inconel 718 narrow-deep-groove with a single-layer cubic boron nitride grinding wheel

Investigation of ultrasonic-assisted CNC cutting of honeycomb cores

Experimental and numerical investigation of forming defects and stress analysis in laser-welded blanks during deep drawing process

A review on wire-arc additive manufacturing: typical defects, detection approaches, and multisensor data fusion-based model

A generalized analysis of energy saving strategies through experiment for CNC milling machine tools

Study on the ultrasonic guided wave and online visual monitoring for ultrasonic precise bonding

Premium Partners