Top

Measurement Techniques

Published in:

29-06-2017 | LINEAR AND ANGULAR MEASUREMENTS

Assessment of Surface Roughness Using Curvature Parameters of Peaks and Valleys of the Profile

Authors: O. S. Bashevskaya, S. V. Bushuev, A. A. Nikitin, Е. V. Romash, Yu. V. Poduraev

Published in: Measurement Techniques | Issue 2/2017

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

A methodology has been developed to assess the roughness of a surface from the parameters of the curvature of peaks and valleys of the profile based on computer spectral analysis. The dependence of these parameters on the type and modes of processing, as well as on the material, is established.

previous article Method for Certification Monitoring of Surface Inhomogeneities of Optics Based on Frequency Analysis of the Surface Profile

next article Effect of the Number of Check Points of a Surface Profile on the Error of Measuring Deviations from Straightness

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

GOST R ISO 25178-2-2014, Geometric Characteristics of Products. Surface Structure. Area. Part 2. Terms, Definitions, and Parameters of Surface Structure.

S. N. Grigor’ev, V. A. Sinopalnikov, M. V. Tereshin, and V. D. Gurin, “Monitoring parameters of the cutting process based on diagnostics of tool and material,” Izmer. Tekhn., No. 5, 46–48 (2012).

O. S. Bashevskaya, R. M. Gulieva, E. V. Romash, and E. A. Mel’nichenko, “Research on temperature deformations of terminal measures of length,” Vestn. MGTU Stankin, No. 4 (31), 36–40 (2014).

O. S. Bashevskaya, G. B. Kainer, and E. V. Romash, “Overall assessment using the thermal imaging method for the state of finished surfaces in mechanical engineering,” Kontrol. Diagnost., No. 2, 36–41 (2012).

S. N. Grigor’ev, M. P. Korochkin, S. V. Fedorov, et al., “Research of the process of electroerosive processing using vibroacoustic diagnostics,” Izmer. Tekhn., No. 8, 3–37 (2015).

D. Whitehouse, Metrology of Surfaces. Principles, Production Methods, and Devices: Scientific Edition [Russian translation], Izd. Dom Intellekt, Dolgoprudnyi (2009).

N. K. Foteev, Technology of Electroerosive Processing, Mashinostroenie, Moscow (1980).

P. P. Serebrenskii, Modern Electroerosive Technologies and Equipment, Lan’, St. Petersburg (2013).

R. Lich, Engineering Fundamentals of Measurements of Nanometer Accuracy: Textbook [Russian translation], Izd. Dom Intellekt, Dolgoprudnyi (2012).

10.

S. N. Grigor’ev and V. I. Vlasov, Electroerosive and Electrochemical Processing, ITO, Moscow (2010).

11.

O. S. Bashevskaya, S. V. Bushuev, A. A. Nikitin, et al., “Selection of parameters of roughness for assessing quality of product surface after electroerosive processing,” Izmer. Tekhn., No. 8, 20–22 (2015).

12.

O. S. Bashevskaya, A. A. Nikitin, and S. V. Bushuev, “Metrological research of microprofile and parameters of roughness for high-precision parts after electroerosive processing,” Vestn. MGTU Stankin, No. 1, 58–64 (2015).

13.

N. V. Korobova, A. Yu. Aksenenko, O. S. Bashevskaya, and A. A. Nikitin, “Research on effect of electroerosive processing modes on the microstructure and precision of the high-precision dimensions of small parts,” Metalloved. Term. Obrab. Met., No. 10, 11–15 (2015).

14.

S. N. Grigor’ev, “Monitoring the parameters of the cutting process based on diagnostics of tool and material,” Izmer. Tekhn., No. 5, 46–48 (2012).

15.

S. N. Grigor’ev, “Diagnostic systems as basis for technological improvement,” Proc. CIRP: 1st CIRP. Conf. High Performance Cutting-2012, K. Wegener (ed.) (2012), Vol. 1, pp. 599–604.

16.

P. S. Ignat’ev, K. V. Indukaev, P. A. Osipov, et al., “Use of interference microscopy to analyze micro- and nanorelief and surface defects of large-sized parts in various industries,” Vestn. MGTU Stankin, 2, No. 4, 150–155 (2011).

Title: Assessment of Surface Roughness Using Curvature Parameters of Peaks and Valleys of the Profile
Authors: O. S. Bashevskaya
S. V. Bushuev
A. A. Nikitin
Е. V. Romash
Yu. V. Poduraev
Publication date: 29-06-2017
Publisher: Springer US
Published in: Measurement Techniques / Issue 2/2017
Print ISSN: 0543-1972
Electronic ISSN: 1573-8906
DOI: https://doi.org/10.1007/s11018-017-1161-z

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 2/2017

Measurements of Characteristics of Clutter

Method for Measuring the Time Intervals of the Correlation Functions of a Sequence of Femtosecond Laser Pulses

Calculation of the Main Magnetization Curve of Structural Steels Based on Parameter Measurements of the Limit Hysteresis Loop

Compact Multifunction Nuclear-Magnetic Spectrometer

Method of Generating Vibration Test Signals

Metrological Capabilities of the National Primary Standard for the Units of Relative Humidity of Gases, Molar (Volume) Fraction of Moisture, and Temperature of the Dew/Frost Point, GET 151-2014