Top

Published in:

2021 | OriginalPaper | Chapter

Bonding Mechanism and Interface Enhancement of Bamboo Fiber Reinforced Composites

Authors : Asrafuzzaman, Kazi Faiza Amin, Ahmed Sharif, Md Enamul Hoque

Published in: Bamboo Fiber Composites

Publisher: Springer Singapore

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

Nowadays, the utilization of natural fiber-reinforced polymeric composites has increased due to its eco-friendly nature. Among all the natural fiber reinforced polymer composites, bamboo fibers have caught attention as reinforcement in the polymeric matrix due to its superior mechanical properties, sustainability, and recyclability. The bonding mechanism of the polymeric matrix, bamboo fiber reinforcement, and their interface plays a critical part in governing the properties and performance of the formed composite materials. Factors like moisture content and lignin tend to reduce the interfacial adhesion between matrix and reinforcement phases resulting in the formation of defects and loss of strength that degrades the quality of the composite materials. That is why the enhancement of interfacial bonding/adhesion is required to ensure optimal properties of bamboo reinforced composite materials. This article summarizes the chemical treatments and the interfacial agents such as mercerization, use of compatibilizers, and silane treatment that are employed to enhance the interfacial adhesion which eventually leads to an improvement of strength in tension, stiffness, flexural strength, interfacial shear strength and so forth.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

previous chapter Futuristic Prospects of Bamboo Fiber in Textile and Apparel Industries: Fabrication and Characterization

next chapter Lifecycle Assessment of Thermoplastic and Thermosetting Bamboo Composites

Tshai KY, Chai AB, Kong I, Hoque, ME, Tshai KH (2014) Hybrid fibre polylactide acid composite with empty fruit bunch: chopped glass strands. J Compos 2014: 1–7. (Article ID 987956). doi: https://doi.org/10.1155/2014/987956

Khalid M, Ratnam CT, Walvekar R, Ketabchi MR, Hoque ME (2017) Reinforced natural rubber nanocomposites: next generation advanced material. In: Jawaid M, Salit M, Alothman O (eds) Green biocomposites. green energy and technology. Springer, Switzerland. https://doi.org/https://doi.org/10.1007/978-3-319-49382-4_14

Das I, Sagadevan S, Chowdhury ZZ, Hoque ME (2018) (2018) Development, optimization and characterization of a two step sol–gel synthesis route for ZnO/SnO2 nanocomposite. J Mater Sci: Mater Electron 29:4128–4135. https://doi.org/10.1007/s10854-017-8357-5CrossRef

Hossain SKS, Hoque ME (2018) Polymer nanocomposite materials in energy storage: properties and applications. In: Jawaid M, Mansoob Khan M (eds) Polymer-based nanocomposites for energy and environmental applications, Woodhead Publishing, Elsevier, UK. https://doi.org/https://doi.org/10.1016/B978-0-08-102262-7.00009-X

Wahab MA, Islam N, Hoque ME, Young DJ (2018) Recent advances in silver nanoparticle containing biopolymer nanocomposites for infectious disease control—a mini review. Curr Anal Chem 14(6):198–202. https://doi.org/10.2174/1573411013666171009163829CrossRef

Sagadevan S, Fareen A, Hoque ME, Chowdhury ZZ, Johan MRB, Rafique RF, Aziz FA, Lett JA (2019) Nanostructured polymer biocomposites: pharmaceutical applications. In: Swain SK, Jawaid M (eds) Nanostructured polymer composites for biomedical application, Elsevier, UK. https://doi.org/https://doi.org/10.1016/B978-0-12-816771-7.00012-0

AL-Oqla FM, Sapuan SM, Anwer T, Jawaid M, Hoque ME (2015) Natural fiber reinforced conductive polymer composites as functional materials: a review. Synth Metals 206:42–54. dOI:https://doi.org/10.1016/j.synthmet.2015.04.014

Asim M, Abdan K, Jawaid M, Nasir M, Dashtizadeh Z, Ishak MR, Hoque ME, Deng Y (2015) A review on pineapple leaves fibre and its composites. Int J Polym Sci 950567:1–16. https://doi.org/10.1155/2015/950567CrossRef

Haniffah WH, Sapuan SM, Abdan K, Khalid M, Hasan M, Hoque ME (2015) Kenaf fibre reinforced polypropylene composites: effect of cyclic immersion on tensile properties. Int J Polym Sci 2015:1–6. (Article ID 872387)

10.

Hasan M, Hoque ME, Mir SS, Saba N, Sapuan SM (2015) Manufacturing of coir fibre-reinforced polymer composites by hot compression technique. In: Salit M, Jawaid M, Yusoff N, Hoque M (eds) Manufacturing of natural fibre reinforced polymer composites. Springer, Switzerland. https://doi.org/https://doi.org/10.1007/978-3-319-07944-8_15

11.

Asha AB, Sharif A, Hoque ME (2017) Interface interaction of jute fiber reinforced PLA biocomposites for potential applications. In: Jawaid M, Salit M, Alothman O (eds) Green biocomposites. Green energy and technology. Springer, Switzerland. https://doi.org/https://doi.org/10.1007/978-3-319-49382-4_13

12.

Janssen JJA (2000) Designing and building with bamboo. International Network for Bamboo and Rattan (INBAR technical report). Available at: https://books.google.com.bd/books?id=D6stAAAACAAJ.

13.

Zakikhani P, Zahari R, Sultan MTH, Majid DL (2014) Bamboo fibre extraction and its reinforced polymer composite material. Int J Chem Biomol Metallurg Mater Sci Eng 8(4):271–274

14.

Saxena M, Gowri VS (2003) Studies on bamboo polymer composites with polyester amide polyol as interfacial agent. Polym Compos 24(3):428–36

15.

Osorio L, Trujillo E, Van Vuure AW, Verpoest I (2011) Morphological aspects and mechanical properties of single bamboo fibers and flexural characterization of bamboo/epoxy composites. J Reinf Plast Compos 30(5):396–408. https://doi.org/10.1177/0731684410397683CrossRef

16.

Verma D (2016)Green approaches to biocomposite materials science and engineering. IGI Global, Pennsylvania. doi: 10.4018/978-1-5225-0424-5

17.

Jain S, Kumar R, Jindal UC (1992) Mechanical behaviour of bamboo and bamboo composite. J Mater Sci 27(17):4598–4604. https://doi.org/10.1007/BF01165993CrossRef

18.

Walter L (2002) The anatomy of bamboo culms. International Network for Bamboo and Rattan (INBAR), p 128. doi: https://doi.org/10.1007/BF00994018

19.

Okubo K, Fujii T, Yamamoto Y (2004) Development of bamboo-based polymer composites and their mechanical properties. Compos a Appl Sci Manuf 35(3):377–383. https://doi.org/10.1016/j.compositesa.2003.09.017CrossRef

20.

El-Abbassi FE, Assarar M, Ayad R, Lamdouar N (2015) ‘Effect of alkali treatment on Alfa fibre as reinforcement for polypropylene based eco-composites: Mechanical behaviour and water ageing. Compos Struct 133:451–457. https://doi.org/10.1016/J.COMPSTRUCT.2015.07.112CrossRef

21.

Saheb DN, Jog JP (1999) ‘<Saheb (1999) NF composition 7- kenaf.pdf>’. 18(4):351–363. doi: https://doi.org/10.1002/(SICI)1098-2329(199924)18

22.

Liu D, Song J, Anderson D, Chang P, Hua Y (2012) Bamboo fiber and its reinforced composites: structure and properties. Cellulose 19(5):1449–1480. https://doi.org/10.1007/s10570-012-9741-1CrossRef

23.

Ismail H, Edyham MR, Wirjosentono B (2002) Bamboo fibre filled natural rubber composites: the effects of filler loading and bonding agent. Polym Testing 21(2):139–144. https://doi.org/10.1016/S0142-9418(01)00060-5CrossRef

24.

John MJ, Thomas S (2008) Biofibres and biocomposites. Carbohyd Polym 71(3):343–364. https://doi.org/10.1016/j.carbpol.2007.05.040CrossRef

25.

Zhou Y, Fan M, Chen L (2016) Interface and bonding mechanisms of plant fibre composites: an overview, Composites part B: engineering. Elsevier Ltd. doi: 10.1016/j.compositesb.2016.06.055

26.

Madhukar MS, Drzal LT (1992) Fiber-matrix adhesion and its effect on composite mechanical properties: IV. Mode I and mode II fracture toughness of graphite/epoxy composites. J Compos Mater 26(7):936–968. https://doi.org/10.1177/002199839202600701CrossRef

27.

Kuk Kim KJ, Pal K (2011) Recent advances in the processing of wood-plastic composites. Springer. doi: 10.1007/978-3-642-14877-4

28.

Chen H, Miao M, Ding X (2009) Influence of moisture absorption on the interfacial strength of bamboo/vinyl ester composites. Compos A Appl Sci Manuf 40:2013–2019. https://doi.org/10.1016/j.compositesa.2009.09.003CrossRef

29.

Tae Kang J, Kim S (2011) Improvement in the mechanical properties of polylactide and bamboo fiber biocomposites by fiber surface modification. Macromol Res 19:789–796. https://doi.org/10.1007/s13233-011-0807-yCrossRef

30.

Das M, Chakraborty D (2009a) Effects of alkalization and fiber loading on the mechanical properties and morphology of bamboo fiber composites. II. Resol matrix. J Appl Polym Sci 112(1):447–453. https://doi.org/10.1002/app.29383CrossRef

31.

Das M, Chakraborty D (2009b) The effect of alkalization and fiber loading on the mechanical properties of bamboo fiber composites, part 1—polyester resin matrix. J Appl Polym Sci 112(1):489–495. https://doi.org/10.1002/app.29342CrossRef

32.

Huda MS, Drzal LT, Misra M, Mohanty AK (2006) Wood-fiber-reinforced poly(lactic acid) composites: evaluation of the physicomechanical and morphological properties. J Appl Polym Sci 102(5):4856–4869. https://doi.org/10.1002/app.24829CrossRef

33.

Li X, Tabil L, Panigrahi S (2007) Chemical treatments of natural fiber for use in natural fiber-reinforced composites: a review. J Polym Environ 15:25–33. https://doi.org/10.1007/s10924-006-0042-3CrossRef

34.

Mi Y, Chen X, Guo Q (1997) Bamboo fiber-reinforced polypropylene composites: crystallization and interfacial morphology. J Appl Polym Sci 64(7):1267–1273. https://doi.org/10.1002/(sici)1097-4628(19970516)64:7%3c1267::aid-app4%3e3.3.co;2-bCrossRef

35.

Jiang L, Chen F, Qian J, Huang J, Wolcott M, Liu L, Zhang J (2010) Reinforcing and toughening effects of bamboo pulp fiber on poly(3-hydroxybutyrate-C0-3-hydroxyvalerate) fiber composites. Ind Eng Chem Res 49(2):572–577. https://doi.org/10.1021/ie900953zCrossRef

36.

Jiang L, Huang J, Qian J, Chen F, Zhang J, Wolcott M, Zhu Y (2008) Study of poly(3-hydroxybutyrate- co -3-hydroxyvalerate) (PHBV)/bamboo pulp fiber composites: effects of nucleation agent and compatibilizer. J Polym Environ 16:83–93. https://doi.org/10.1007/s10924-008-0086-7CrossRef

37.

Zhou Y, Fan M, Chen L, Zhuang J (2015) Lignocellulosic fibre mediated rubber composites: an overview. Compos B Eng 76:180–191. https://doi.org/10.1016/j.compositesb.2015.02.028CrossRef

38.

Kalia S, Kaith BS, Kaur I (2009) Pretreatments of natural fibers and their application as reinforcing material in polymer composites-a review. Polym Eng Sci 49:1253–1272. https://doi.org/10.1002/pen.21328CrossRef

39.

Wong KJ, Yousif BF, Low KO (2010) The effects of alkali treatment on the interfacial adhesion of bamboo fibres. Proc Inst Mech Eng Part L J Mater Des Appl 224(3):139–148. https://doi.org/10.1243/14644207JMDA304CrossRef

40.

Okubo K, Fujii T (2013) Improvement of interfacial adhesion in bamboo polymer composite enhanced with microfibrillated cellulose. Polym Compos Biocompos 3:317–329. https://doi.org/10.1002/9783527674220.ch9CrossRef

41.

Lu T, Liu S, Jiang M, Xu X, Wang Y, Wang Z, Gou J, Hui D, Zhou Z (2014) Effects of modifications of bamboo cellulose fibers on the improved mechanical properties of cellulose reinforced poly(lactic acid) composites. Compos Part B Eng 62:191–197. https://doi.org/10.1016/j.compositesb.2014.02.030CrossRef

42.

Wang F, Lu M, Zhou S, Lu Z (2019) Molecules effect of fiber surface modification on the interfacial adhesion and thermo-mechanical performance of unidirectional epoxy-based composites reinforced with bamboo fibers. Molecules 24(15):2682

43.

Zhang X, Wang F, ML Keer (2015) Influence of surface modification on the microstructure and thermo-mechanical properties of bamboo fibers. Materials 8:6597–6608. https://doi.org/10.3390/ma8105327CrossRef

44.

Fuentes C, Tran LQN, Van Hellemont M, Janssens V, Dupont C, Vuure AW, Verpoest I (2013) ‘Effect of physical adhesion on mechanical behaviour of bamboo fibre reinforced thermoplastic composites. Coll Surf A Phys Eng Aspects 418:7–15. doi: 10.1016/j.colsurfa.2012.11.018

Title: Bonding Mechanism and Interface Enhancement of Bamboo Fiber Reinforced Composites
Authors: Asrafuzzaman
Kazi Faiza Amin
Ahmed Sharif
Md Enamul Hoque
Publisher: Springer Singapore
Book: Bamboo Fiber Composites
Print ISBN: 978-981-15-8488-6

Electronic ISBN: 978-981-15-8489-3

Copyright Year: 2021
DOI: https://doi.org/10.1007/978-981-15-8489-3_12

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Premium Partners