Skip to main content
Disciplines
Automotive Business IT + Informatics Construction + Real Estate Electrical Engineering + Electronics Energy + Sustainability Insurance + Risk Finance + Banking Management + Leadership Marketing + Sales Mechanical Engineering + Materials
Events
DE
EN
Books
Journals
Topic Page
Marketing
Start single access now
Access for companies
EXTENDED SEARCH
Log in
Top
Published in:
Fundamental Laws of Gearing Read chapter Read first chapter

2022 | OriginalPaper | Chapter

10. Calculation of Gear Trains in Transmission Systems of Vehicles

Author : Vladimir B. Algin

Published in: Advances in Gear Theory and Gear Cutting Tool Design

Publisher: Springer International Publishing

Log in

Activate our intelligent search to find suitable subject content or patents.

search-config
loading …

Abstract

The architectonics of the gear train information model (digital twin), developed on the basis of the lifetime mechanics of machines, is presented, and its main components – concepts, representations, models and methods – are described. These provisions and methods were created within the framework of the scientific school founded by Igor Tsitovich, Corresponding Member of the Academy of Sciences of Belarus. Brief historic data are given. Currently, this direction is developing at the Joint Institute of Mechanical Engineering of the National Academy of Sciences of Belarus. The developed architectonics contains several new components: three method of gear trains synthesis, universal kinematic-quasi-static calculations for the gear transmissions of any configuration, simulation of dynamics based on concept of a regular mechanical systems, strength calculations in the lifetime form, space of operation conditions, reliability calculations according to multilevel “mechanics-dependability” scheme, and a special method for reliability calculation under the general load conditions of the components. Basic representations of the transmission (kinematic diagram, a set of dynamic schemes, life-strength curves, schemes of limiting states, etc.) appear in the development process and go through all stages of life cycle. These components are complemented at the operational stage by transmission diagnostics and evaluation of its lifetime expense as a complex item and serves as accumulators of new knowledge and data about the item and its operation conditions (environment). The methodological provisions developed for the transmissions are applicable to a wide range of engineering objects. They are also presented in the State standards of the USSR and the Republic of Belarus.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

inform now
previous chapter Design of Technological Systems for Gear Finishing
next chapter Multispeed Planetary-Layshaft Transmissions with Multipower Flow
Literature
1.
Agarski B., Kljajin M., Budak I., Tadic B., Vukelic D., Bosak M., Hodolic J. Application of multi-criteria assessment in evaluation of motor vehicles’ environmental performances. Technical Gazette, 19, pp. 221–226 (2012).
2.
Algin V. Algorithm for obtaining structures of planetary gearboxes. In: Proceeding 3rd scientific and technical conference. “Development and application of computer techniques and tools for automated information processing”, BPI, Minsk, pp. 63–610. (1974) (in Russian).
3.
Algin V. B. Dynamic schemes of mobile machines: Operational-and-informational materials. Minsk: INDMASH AN BSSR, 1978 (in Russian).
4.
Algin V.B., Pavlovsky V.Ya, Paddubka S.M. Vehicle and tractor transmission dynamics. Ed. I. Tsitovich. Minsk: Nauka & Tekhnika, 1986 (in Russian).
5.
Algin V. Analysis and Classification of Structural and Kinematic Diagrams for Power Trains and Their Units. In: Proc. Scientific Seminar: Terminology of the Mechanism and Machine Science, Minsk, Belarus, pp. 19–26 (2010).
6.
Algin V. Approaches and Techniques for Calculating Real Reliability of Machine as a System of Different Dependent Components and Complicated Logic of Limiting States. In: Proc. 13th World Congress in Mechanism and Machine Science, Guanajuato, México, 6 p. (2011).
7.
Algin V. B. Calculation of Mobile Technics: Kinematics, Dynamics, Life, Belaruskaya Navuka, Minsk, 2014 (in Russian).
8.
Algin V. From Newton’s Mechanics to Dynamics of Regular Mechanical Systems with Variable States and Power Flows. In: Proc. 14th IFToMM World Congress, Taipei, рp. 130–139 (2015).
9.
Algin V. History and Current State of the Belarusian Scientific School of Calculation and Design of Transmissions of Mobile Machines. In: Gears and Transmissions in Belarus: Design, Technology, Estimation of Properties. Eds. Algin V. and Starzhisky V. Minsk: Belaruskaya Navuka, 2017, pp. 10–76 (in Russian).
10.
Algin V., Ishin M., Paddubka, S. Models and approaches in design and diagnostics of vehicles planetary transmissions. In: IOP Conference Series: Material Science and Engineering 393 012042, 10 p. (2018).
11.
Algin V., Ishin M., Paddubka, S., Starzhinsky, V., Shil’ko, S., Rackov, M., Čavić, M.: Development of Information Model of Power Transmissions in The Light of Industry 10.0. In: Int. Scient. Journal “Mathematical Modeling” 4, 54–63 (2020).
12.
13.
Automobiles: construction, designing and calculation. Transmission: Tutorial for a specialty «Automobiles and tractors». Ed. A. Grishkevich. Minsk: Vysheyshaya shkola, 1985 (in Russian).
14.
Bertsche B. Reliability in automotive and mechanical engineering, Springer, 2008.
15.
Chatterjee G and Tsai L. Enumeration of Epicyclic-type Automatic Transmission Gear Trains, Transactions of SAE 941012, pp. 153-164 (1994).
16.
Ding H., Liu S., Huang P., Cai C., Huang Z. Automatic Structural Synthesis of Epicyclic Gear Trains with One Main Shaft. In: Proc. of the ASME 2015 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference IDETC/CIE 2015, Boston, USA pp. 1–10 (2015).
17.
18.
Designing and calculation of wheel cross-country machines: text-book for technical colleges; N.F. Bocharov and I.S. Tsitovich (eds.). Moscow: Mashinostroenie, 1983 (in Russian).
19.
Designing automobile transmission: handbook; Ed. A. Grishkevich. Moscow: Mashinostroenie, 1984 (in Russian).
20.
21.
EA033682 (B1) ― 2019-11-15: Main Box of Planetary Gearbox, Planetary Gearbox and Method for Manufacture Thereof
22.
EA201700590(A1) ― 2019-04-30: Planetary Gearbox Main Box, Planetary Gearbox
23.
Ershov A. On the information model of the machine. In: Microprocessor means and systems. 1985, 10. P. 2 (in Russian).
24.
Fiondella L. and Gokhale S.S. Estimating system reliability with correlated component failures. In: Int. Journal of Reliability and Safety, Vol. 4, No.2/3, pp. 188–205 (2010).
25.
Gharaei A., Lu J., Stoll O., Zheng X., West S., Kiritsis D. (2020) Systems Engineering Approach to Identify Requirements for Digital Twins Development. In: Lalic B., Majstorovic V., Marjanovic U., von Cieminski G., Romero D. (eds) Advances in Production Management Systems. The Path to Digital Transformation and Innovation of Production Management Systems. APMS 2020. IFIP Advances in Information and Communication Technology, vol 591. Springer, Cham. pp. 82-90, https://​doi.​org/​10.​1007/​978-3-030-57993-7_​10 (2020).
26.
Grieves, M. Product Lifecycle Management: Driving the Next Generation of Lean Thinking. New York: McGraw-Hill (2006).
27.
28.
Grieves, M.: Virtually Intelligent Product Systems: Digital and Physical Twins. In: S. Flumerfelt, et al. (eds.) Complex Systems Engineering: Theory and Practice, pp. 175–200. American Institute of Aeronautics and Astronautics (2019).CrossRef
29.
30.
Grinberg A., Algin V. Information models and resources of machines. In: Proceed-ings of the International Conference “Mechanics of Machines on the Threshold of the Third Millennium”, pp. 272–281. IMM NAS Belarus, Minsk (2001) (in Russian).
31.
GOST 27.301–83 State standard of the USSR. Reliability in technique. Prognosis of product reliability during designing. General requirements (in Russian).
32.
Hähnel A., Lemaire M., Rieuneau F., and Petit F. Machines and mechanisms design for reliability. In: 12th IFToMM World Congress, Besançon, France, pp. 1– 7 (2007).
33.
Hsu C-H, Yeh Y-C and Yang Z-R. Epicyclic Gear Mechanisms for Multi-Speed Automotive Automatic Transmissions, Proceedings of the National Science Council, Part A 25(1) 63-69 (2001).
34.
ISO/DIS 23247-1 Automation systems and integration – Digital Twin framework for manufacturing — Part 1: Overview and general principles (2020).
35.
ISO 281: 2007 Rolling bearings – Dynamic load ratings and rating life.
36.
ISO 6336-1: 2019 Calculation of load capacity of spur and helical gears. – Part 1: Basic principles, introduction and general influence factors.
37.
ISO 6336-6: 2019 Calculation of load capacity of spur and helical gears – Part 6: Calculation of service life under variable load.
38.
ISO/IEC/IEEE 42010: 2011 Systems and software engineering – Architecture description.
39.
Kapur K.C., Lamberson L.R. Reliability in engineering design, New York, John Willey & Sons (1977).
40.
Keuthen M. REXS – Standardized Gear Unit Model. In: International Conference on Gears 2019. Garching/Munich, Germany, pp. 701–712 (2019).
41.
Kissling U, Stolz U., Türich A. Combining gear design with manufacturing process decisions. In: International Conference on Gears 2019. Garching/Munich, Germany, pp. 1532–1544 (2019).
42.
43.
Meis J-A, Teklote F., Borowski M. Simulation of the tooth root strength under consideration of material quality, finishing process and size effects. In: International Conference on Gears 2019. Garching/Munich, Germany, pp. 161–171 (2019).
44.
Mohamed M., Garnett R., Ferguson M., Kanaroglou P. Electric buses: A review of alternative powertrains. In: Renewable and sustainable energy reviews, 62, pp. 673-684 (2016).
45.
Paddubka S., Algin V., Starzhinsky V., Shil’ko S. Development of Mechanism and Machine Science in Belarus by an Example of Gears and Gear Transmissions. IOP Conference Series: Material Science and Engineering 393 012043, 9 p. (2018).
46.
Raghavan M. Synthesis of Transmissions with Four Planetary Gearsets. In: Proc. 14th IFToMM World Congress, Taipei, Taiwan, pp. 1-5 (2015).
47.
Rathore, M.M., Shah, S.A., Shukla, D., Bentafat, E., Bakiras, S. The Role of AI, Machine Learning, and Big Data in Digital Twinning: A Systematic Literature Review, Challenges, and Opportunities. In: IEEE Access, 9, 32030–32052 (2021).
48.
RD 37.001.010-83. Management directive. Selection and calculation of automobile rolling bearings. Moscow: Minavtoprom, 1984 (in Russian).
49.
RD 50-639-87. Methodical instructions. Calculation of reliability indexes. General provisions. Moscow: Publishing house of standards, 1987 (in Russian).
50.
Rovdo V.I. Statistical methods of research of loadings the transport and traction machines: The dissertation on competition of a scientific degree of Cand. Tech. Sci. Minsk: BPI, 1973 (in Russian).
51.
52.
Schlecht B., Schulze T. Improved tooth contact analysis by using virtual gear twins. How helpful is AI for finding best gear design? In: International Conference on Gears. Garching/Munich, pp. 203–2015 (2019).
53.
Stahl K. Forward. In: Proceeding of International Conference on Gears 2019. Garching/Munich, Germany (2019).
54.
STB 2465-2016 State standard of the Republic of Belarus. Dependability in technics. Dependability management of technically complicated items (in Russian).
55.
STB 2466-2016 State standard of the Republic of Belarus. Dependability in Technics. Dependability Calculation of Technically Complicated Items (in Russian).
56.
STB 2578-2020 State standard of the Republic of Belarus. Dependability in technics. Estimation of lifetime expense for technically complicated items (in Russian).
57.
STB 2579-2020 State standard of the Republic of Belarus. Dependability in technics Vibration monitoring of the state of spur gears of drives of technically complicated items. Assessment of residual life (in Russian).
58.
Stefanovic-Marinovic J., Petkovic M., Stanimirovic I., Milovancevic M. A model of planetary gear multicriteria optimization, Transactions of FAMENA 35(4), pp. 21–34 (2011).
59.
Tsai L. An Application of the Linkage Characteristic Polynomial to the Topological Synthesis of Epicyclic Gear Trains, ASME Journal of Mechanisms, Transmissions, and Automation in Design 109(3) 329-336 (1987).CrossRef
60.
Tsitovich I.S. Calculations on limiting states of shaft, gears and bearings of the automobile. Minsk: BPI, 1960 (in Russian).
61.
Tsitovich I.S. Forecast, searches and results of researches of problem laboratory of automobiles. Collection of papers devoted to 50th anniversary of BPI. Minsk: BPI, 1975, pp. 65–76 (in Russian).
62.
Tsitovich I.S., Kanonik I.V., Vavulo V.A. Transmissions of the automobile. Minsk: Nauka & Tekhnika, 1979 (in Russian).
63.
Tsitovich I.S., Algin V. B. Vehicle dynamics. Minsk: Nauka & Tekhnika, 1981 (in Russian).
64.
Tsitovich I.S., Mitin B.E., Dzjun V.A. Reliability of transmissions of cars and tractors. Minsk: Nauka & Tekhnika, 1985 (in Russian).
65.
Tsitovich I.S. Algin V.B., Gritskevich V.V. Analysis and synthesis of planetary gearboxes of cars and tractors. Minsk: Nauka & Tekhnika, 1987 (in Russian).
66.
US 2220174 Speed changing device / Ravigneaux P. – Publ. date 05.11.1940.
67.
US 2856794 Planetary transmission for self-propelled vehicle / Simpson H. W. – Publ. date 21.10.1958.
68.
US 5106352 Multispeed automatic transmission for automobile vehicles / Lepelletier P. A. G. – Publ. date: 21.010.1992.
69.
Vavulo V.A. Calculations of gears and bearings of automobile transmission: Methodical manual on course of studies and degree work. Minsk: BNTU, 1990 (in Russian).
70.
Vintr M. Reliability assessment for components of complex mechanisms and machines. In: 12th IFToMM World Congress, Besançon (France), 4 p. (2007).
71.
Yin, P.L., Wang, J.H., Lu, C.X., Digital Twin of Gear Measuring Center (DTGMC). In: International Conference on Gears 2019. Garching/Munich, Germany, pp. 1521–1531 (2019).
72.
Algin V., Kim H.-E. Reliability and Lifetime of Mechanical Units in Operation and Test. In: Key Engineering Materials, Vols. 326–328, pp. 549–552 (2006).
73.
Algin V., Ivanov V. Kinematic and dynamic computation of vehicle transmission based on regular constructs. In: Proc. 12th IFToMM World Congress, Besançon (France), eds. Merlet J.-P. and Dahan M. Paper A14, pp. 1–6 (2007).
74.
Algin V., Ivanov V. Application of Regular Rotational and Translational Constructs to Vehicle Dynamics Problems. In: Proc. 7th European Conference on Structural Dynamics, Edited by Michael J. Brennan, Institute of Sound and Vibration Research, University of Southampton, Southampton, UK. Paper E16, pp. 1–12 (2008).
Metadata
Title
Calculation of Gear Trains in Transmission Systems of Vehicles
Author
Vladimir B. Algin
Copyright Year
2022
Book
Advances in Gear Theory and Gear Cutting Tool Design

Print ISBN: 978-3-030-92261-0

Electronic ISBN: 978-3-030-92262-7

Copyright Year: 2022

DOI
https://doi.org/10.1007/978-3-030-92262-7_10

Premium Partners

    Image Credits