Skip to main content
Disciplines
Automotive Business IT + Informatics Construction + Real Estate Electrical Engineering + Electronics Energy + Sustainability Insurance + Risk Finance + Banking Management + Leadership Marketing + Sales Mechanical Engineering + Materials
Events
DE
EN
Books
Journals
Topic Page
Marketing
Start single access now
Access for companies
EXTENDED SEARCH
Log in
Top
Tribology Letters
Published in: Tribology Letters 2/2018

01-06-2018 | Original Article

Characterization of the Tribological Behavior of the Textured Steel Surfaces Fabricated by Photolithographic Etching

Authors: Yufu Xu, Jingyuan Yu, Jian Geng, Rasha Abuflaha, Dustin Olson, Xianguo Hu, Wilfred T. Tysoe

Published in: Tribology Letters | Issue 2/2018

Log in

Activate our intelligent search to find suitable subject content or patents.

search-config
loading …

Abstract

A photolithography etching technique was used to fabricate textured surfaces on steel samples. The friction and wear behavior of the textured surfaces were studied with surface contact sliding. The influence of the diameter and the density of the dimples were investigated. The results show that the textured surfaces with appropriate diameters and densities had excellent friction reducing and antiwear properties. Large-diameter dimples can destroy the integrity of the lubricating film, and low- or high-density dimples produce more iron sulfates and fewer ferrous sulfides on the rubbing surfaces due to the tribo-reactions, which resulted in higher friction coefficients. The tribo-chemical films, oil micro-reservoir and wear debris-containing roles of the dimples together help the textured surfaces to provide improved antiwear properties.
previous article Tip-Enhanced Raman Spectroscopy Studies on Amorphous Carbon Films and Carbon Overcoats in Commercial Hard Disk Drives
next article Effect of Tribo-Oxidation on Friction and Wear Behaviour of HVOF Sprayed WC–10Co–4Cr Coating

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

inform now
Literature
1.
Wagner, J.J., Jenson, A.D., Sundararajan, S.: The effect of contact pressure and surface texture on running-in behavior of case carburized steel under boundary lubrication. Wear 376, 851–857 (2017)CrossRef
2.
Etsion, I.: Modeling of surface texturing in hydrodynamic lubrication. Friction 1, 195–209 (2013)CrossRef
3.
Brizmer, V., Kligerman, Y., Etsion, I.: A laser surface textured parallel thrust bearing. Tribol. Trans. 46, 397–403 (2003)CrossRef
4.
Kovalchenko, A., Erdemir, A., Ajayi, O., Etsion, I.: Tribological behavior of oil-lubricated laser textured steel surfaces in conformal flat and non-conformal contacts. Mater. Perform. Charact. 6, 1–23 (2017)
5.
Taee, M., Torabi, A., Akbarzadeh, S., Khonsari, M., Badrossamay, M.: On the performance of EHL contacts with textured surfaces. Tribol. Lett. 65, 85 (2017)CrossRef
6.
Sedlaček, M., Podgornik, B., Ramalho, A., Česnik, D.: Influence of geometry and the sequence of surface texturing process on tribological properties. Tribol. Int. 115, 268–273 (2017)CrossRef
7.
Su, B., Huang, L., Huang, W., Wang, X.: The load carrying capacity of textured sliding bearings with elastic deformation. Tribol. Int. 109, 86–96 (2017)CrossRef
8.
Chae, Y.H.: Effect of size for micro-scale dimples on surface under lubricated sliding contact. Key Eng. Mater. 345–346, 765–768 (2007)CrossRef
9.
Etsion, I., Halperin, G., Brizmer, V., Kligerman, Y.: Experimental investigation of laser surface textured parallel thrust bearings. Tribol. Lett. 17, 295–300 (2004)CrossRef
10.
Yu, H., Wang, X., Zhou, F.: Geometric shape effects of surface texture on the generation of hydrodynamic pressure between conformal contacting surfaces. Tribol. Lett. 37, 123–130 (2010)CrossRef
11.
Etsion, I.: State of the art in laser surface texturing. In: Luo, J., Meng, Y., Shao, T., Zhao, Q. (eds.) Advanced Tribology, pp. 761–762. Springer, Heidelberg (2009)CrossRef
12.
Etsion, I., Sher, E.: Improving fuel efficiency with laser surface textured piston rings. Tribol. Int. 42, 542–547 (2009)CrossRef
13.
Pettersson, U., Jacobson, S.: Influence of surface texture on boundary lubricated sliding contacts. Tribol. Int. 36, 857–864 (2003)CrossRef
14.
Ye, J., Zhang, H., Liu, X., Liu, K.: Low wear steel counterface texture design: a case study using micro-pits texture and alumina–PTFE nanocomposite. Tribol. Lett. 65, 165 (2017)CrossRef
15.
Daniel, C., Manderla, J., Hallmann, S., Emmelmann, C.: Influence of an angular hatching exposure strategy on the surface roughness during picosecond laser ablation of hard materials. Phys. Procedia 83, 135–146 (2016)CrossRef
16.
Hu, J., Xu, H.: Friction and wear behavior analysis of the stainless steel surface fabricated by laser texturing underwater. Tribol. Int. 102, 371–377 (2016)CrossRef
17.
Saeidi, F., Parlinska-Wojtan, M., Hoffmann, P., Wasmer, K.: Effects of laser surface texturing on the wear and failure mechanism of grey cast iron reciprocating against steel under starved lubrication conditions. Wear 386–387, 29–38 (2017)CrossRef
18.
Touche, T., Cayer-Barrioz, J., Mazuyer, D.: Friction of textured surfaces in ehl and mixed lubrication: effect of the groove topography. Tribol. Lett. 63, 25 (2016)CrossRef
19.
Xu, S., Shimada, K., Mizutani, M., Kuriyagawa, T.: Fabrication of hybrid micro/nano-textured surfaces using rotary ultrasonic machining with one-point diamond tool. Int. J. Mach. Tools Manuf. 86, 12–17 (2014)CrossRef
20.
Kawasegi, N., Ozaki, K., Morita, N., Nishimura, K., Yamaguchi, M.: Development and machining performance of a textured diamond cutting tool fabricated with a focused ion beam and heat treatment. Precis. Eng. 47, 311–320 (2017)CrossRef
21.
Holmes, P., Snell, J.: A vapour etching technique for the photolithography of silicon dioxide. Microelectron. Reliab. 5, 337–341 (1966)CrossRef
22.
Atar, G., Ternyak, O., Greental, D., Eger, D., Chechelnitsky, G., Mazurski, N., et al.: Fabrication and characterization of large-core Yb/Al-codoped fused silica waveguides using dry etching. Opt. Mater. 38, 265–271 (2014)CrossRef
23.
Zhang, J., Meng, Y.: A study of surface texturing of carbon steel by photochemical machining. J. Mater. Process. Technol. 212, 2133–2140 (2012)CrossRef
24.
Costa, H., Hutchings, I.: Hydrodynamic lubrication of textured steel surfaces under reciprocating sliding conditions. Tribol. Int. 40, 1227–1238 (2007)CrossRef
25.
Gachot, C., Rosenkranz, A., Hsu, S.M., Costa, H.L.: A critical assessment of surface texturing for friction and wear improvement. Wear 372, 21–41 (2017)CrossRef
26.
Braun, D., Greiner, C., Schneider, J., Gumbsch, P.: Efficiency of laser surface texturing in the reduction of friction under mixed lubrication. Tribol. Int. 77, 142–147 (2014)CrossRef
27.
Li, K., Yao, Z., Hu, Y., Gu, W.: Friction and wear performance of laser peen textured surface under starved lubrication. Tribol. Int. 77, 97–105 (2014)CrossRef
28.
Zhang, H., Ding, B., Chen, T.: A high efficiency industrial polysilicon solar cell with a honeycomb-like surface fabricated by wet etching using a photoresist mask. Appl. Surf. Sci. 387, 1265–1273 (2016)CrossRef
29.
Pettersson, U., Jacobson, S.: Friction and wear properties of micro textured DLC coated surfaces in boundary lubricated sliding. Tribol. Lett. 17, 553–559 (2004)CrossRef
30.
Xiong, D., Qin, Y., Li, J., Wan, Y., Tyagi, R.: Tribological properties of PTFE/laser surface textured stainless steel under starved oil lubrication. Tribol. Int. 82, 305–310 (2015)CrossRef
31.
Xie, M., Tang, H., Yao, H.: Failure analysis of tire separation in two-sized tires on Airbus planes. Eng. Fail. Anal. 61, 21–27 (2016)CrossRef
32.
Zheng, X., Xu, Y., Geng, J., Peng, Y., Olson, D., Hu, X.: Tribological behavior of Fe3O4/MoS2 nanocomposites additives in aqueous and oil phase media. Tribol. Int. 102, 79–87 (2016)CrossRef
33.
Xu, Y., Peng, Y., Dearn, K.D., You, T., Geng, J., Hu, X.: Fabrication and tribological characterization of laser textured boron cast iron surfaces. Surf. Coat. Technol. 313, 391–401 (2017)CrossRef
34.
Yu, H., He, J., Sun, L., Tanaka, S., Fugetsu, B.: Influence of the electrochemical reduction process on the performance of graphene-based capacitors. Carbon 51, 94–101 (2013)CrossRef
35.
Bordes, A., Eom, K., Fuller, T.F.: The effect of fluoroethylene carbonate additive content on the formation of the solid-electrolyte interphase and capacity fade of Li-ion full-cell employing nano Si–graphene composite anodes. J. Power Sources 257, 163–169 (2014)CrossRef
36.
Zhou, J.G., Thompson, J., Cutler, J., Blyth, R., Kasrai, M., Bancroft, G.M., et al.: Resolving the chemical variation of phosphates in thin ZDDP tribofilms by X-ray photoelectron spectroscopy using synchrotron radiation: evidence for ultraphosphates and organic phosphates. Tribol. Lett. 39, 101–107 (2010)CrossRef
37.
Bhattacharya, P., Nandasiri, M.I., Lv, D., Schwarz, A.M., Darsell, J.T., Henderson, W.A., et al.: Polyamidoamine dendrimer-based binders for high-loading lithium–sulfur battery cathodes. Nano Energy 19, 176–186 (2016)CrossRef
38.
Su, L., Hei, J., Wu, X., Wang, L., Zhou, Z.: Ultrathin layered hydroxide cobalt acetate nanoplates face-to-face anchored to graphene nanosheets for high-efficiency lithium storage. Adv. Funct. Mater. 27, 1605544 (2017)CrossRef
39.
De Bonis, A., Lovaglio, T., Galasso, A., Santagata, A., Teghil, R.: Iron and iron oxide nanoparticles obtained by ultra-short laser ablation in liquid. Appl. Surf. Sci. 353, 433–438 (2015)CrossRef
40.
Blanco, D., González, R., Viesca, J., Fernández-González, A., Bartolomé, M., Battez, A.H.: Antifriction and antiwear properties of an ionic liquid with fluorine-containing anion used as lubricant additive. Tribol. Lett. 65, 66 (2017)CrossRef
41.
Strauss, E., Ardel, G., Livshits, V., Burstein, L., Golodnitsky, D., Peled, E.: Lithium polymer electrolyte pyrite rechargeable battery: comparative characterization of natural pyrite from different sources as cathode material. J. Power Sources 88, 206–218 (2000)CrossRef
42.
Ferris, F., Tazaki, K., Fyfe, W.: Iron oxides in acid mine drainage environments and their association with bacteria. Chem. Geol. 74, 321–330 (1989)CrossRef
43.
Xu, Y., Peng, Y., Zheng, X., Wang, H., Hu, X.: Influence of microalgal bio-oil on the lubrication properties of engine oil. Oil Gas Sci. Technol. 71, 29 (2016)CrossRef
44.
Minfray, C., Martin, J., De Barros, M., Le Mogne, T., Kersting, R., Hagenhoff, B.: Chemistry of ZDDP tribofilm by ToF-SIMS. Tribol. Lett. 17, 351–357 (2004)CrossRef
45.
You, Y.-L., Li, D.-X., Si, G.-J., Deng, X.: Investigation of the influence of solid lubricants on the tribological properties of polyamide 6 nanocomposite. Wear 311, 57–64 (2014)CrossRef
46.
Loehlé, S., Matta, C., Minfray, C., Le Mogne, T., Iovine, R., Obara, Y., et al.: Mixed lubrication of steel by C18 fatty acids revisited. Part II: influence of some key parameters. Tribol. Int. 94, 207–216 (2016)CrossRef
47.
Qi, X., Ma, J., Jia, Z., Yang, Y., Gao, H.: Effects of weft density on the friction and wear properties of self-lubricating fabric liners for journal bearings under heavy load conditions. Wear 318, 124–129 (2014)CrossRef
48.
Xian, Y., Wang, Y., Wen, S., Nie, Q., Deng, J.: Floatability and oxidation of pyrite with different spatial symmetry. Miner. Eng. 72, 94–100 (2015)CrossRef
49.
Patel, M., Aswath, P.: Role of thermal, mechanical and oxidising treatment on structure and chemistry of carbon black and its impact on wear and friction Part I: extreme pressure condition. Tribol. Mater. Surf. Interfaces 9, 1–18 (2015)CrossRef
50.
Baldwin, B.A.: Relationship between surface composition and wear: an X-ray photoelectron spectroscopic study of surfaces tested with organosulfur compounds. ASLE Trans. 19, 335–344 (1976)CrossRef
51.
Fantauzzi, M., Elsener, B., Atzei, D., Rigoldi, A., Rossi, A.: Exploiting XPS for the identification of sulfides and polysulfides. RSC Adv. 5, 75953–75963 (2015)CrossRef
52.
Barros, M.I.D., Bouchet, J., Raoult, I., Mogne, T.L., Martin, J.M., Kasrai, M., et al.: Friction reduction by metal sulfides in boundary lubrication studied by XPS and XANES analyses. Wear 254, 863–870 (2003)CrossRef
53.
Zhou, L.H., Wei, X.C., Ma, Z.J., Mei, B.: Anti-friction performance of FeS nanoparticle synthesized by biological method. Appl. Surf. Sci. 407, 21–28 (2017)CrossRef
54.
Singh, R.K., Gupta, P., Sharma, O.P., Ray, S.S.: Homogeneous synthesis of cellulose fatty esters in ionic liquid (1-butyl-3-methylimidazolium chloride) and study of their comparative antifriction property. J. Ind. Eng. Chem. 24, 14–19 (2015)CrossRef
Metadata
Title
Characterization of the Tribological Behavior of the Textured Steel Surfaces Fabricated by Photolithographic Etching
Authors
Yufu Xu
Jingyuan Yu
Jian Geng
Rasha Abuflaha
Dustin Olson
Xianguo Hu
Wilfred T. Tysoe
Publication date
01-06-2018
Publisher
Springer US
Published in
Tribology Letters / Issue 2/2018
Print ISSN: 1023-8883
Electronic ISSN: 1573-2711
DOI
https://doi.org/10.1007/s11249-018-1003-4

Other articles of this Issue 2/2018

Tribology Letters 2/2018 Go to the issue

Original Article

Sliding Behaviour of Friction Material Against Cermet Coatings: Pin-on-Disc Study of the Running-in Stage

Original Paper

Surface Engineering Design of Alumina/Molybdenum Fibrous Monolithic Ceramic to Achieve Excellent Lubrication in a High Vacuum Environment

Original Paper

Ultralow Friction Between Steel Surfaces Achieved by Lubricating with Liquid Crystal After a Running-in Process with Acetylacetone

Original Paper

Tribological Behavior of Carbon Nanotube-Reinforced AZ91D Composites Processed by Cyclic Extrusion and Compression

Original Paper

Self-Lubricating PTFE-Based Composites with Black Phosphorus Nanosheets

Original Paper

Effect of Tribo-Oxidation on Friction and Wear Behaviour of HVOF Sprayed WC–10Co–4Cr Coating

Premium Partners

    Image Credits