Skip to main content
Disciplines
Automotive Business IT + Informatics Construction + Real Estate Electrical Engineering + Electronics Energy + Sustainability Insurance + Risk Finance + Banking Management + Leadership Marketing + Sales Mechanical Engineering + Materials
Events
DE
EN
Books
Journals
Topic Page
Marketing
Start single access now
Access for companies
EXTENDED SEARCH
Log in
Top
The International Journal of Advanced Manufacturing Technology
Published in: The International Journal of Advanced Manufacturing Technology 9-10/2024

26-02-2024 | ORIGINAL ARTICLE

Chemical deposition and corrosion perspectives on the development of pipe union steel in automobile industry

Authors: Olumide Omoegun, Ojo Fayomi, Ayodeji Ayoola, Oluranti Agboola

Published in: The International Journal of Advanced Manufacturing Technology | Issue 9-10/2024

Log in

Activate our intelligent search to find suitable subject content or patents.

search-config
loading …

Abstract

Pipe union steel development in the automobile industry necessitates a diversified strategy, notably in terms of surface protection, durability enhancement, and corrosion resistance. This comprehensive research dives into the domain of chemical deposition technologies, primarily electroplating and its derivatives to strengthen steel surfaces against environmental, thermal, and cyclic stressors inherent in car exhaust systems. Electroplating is a flexible technology with numerous applications ranging from corrosion protection and microstructure formation to alloying and the development of high-magnetic force actuators. The research examines electroplating mechanisms, classifies chemical deposition methods, and defines the parameters of an ideal electroplating process. It assesses thin film electrodeposition and autocatalytic or electroless metal deposition, analyzing their benefits, disadvantages, and real-world applications in the automotive industry. It also investigates current research on electroplating applications, environmental problems, and pipe union steel challenges in engineering applications, such as fracture inclinations and material fatigue. Furthermore, this study investigates studies that address environmental contamination caused by electroplating applications, as well as novel methods for reducing hazardous waste. Several experimental and computational researches on steel compositions, alloys, and alternative coatings provide vital insights into enhancing the durability and corrosion resistance of pipe union steel for automotive applications.
previous article Multi-objective optimization of machining parameters in micro-milling LF 21 based on the AHP-entropy weight method
next article A novel prediction method for assembly accuracy of rudder systems considering clearance factors

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

inform now
Literature
1.
Feng Y, McGuire GE, Shenderova OA, Ke H, Burkett SL (2016) Fabrication of copper/carbon nanotube composite thin films by periodic pulse reverse electroplating using nanodiamond as a dispersing agent. Thin Solid Films 615:116–121CrossRef
2.
Charles UA, Ibrahim MA, Teridi MAM (2018) Electrodeposition of organic–inorganic tri-halide perovskites solar cell. J Power Sources 378:717–731CrossRef
3.
Nazeer AA, Madkour M (2018) Potential use of smart coatings for corrosion protection of metals and alloys: a review. J Molec Liq 253:11–22CrossRef
4.
Babaei-Sati R, Parsa JB, Vakili-Azghandi M (2019) Electrodeposition of polypyrrole/metal oxide nanocomposites for corrosion protection of mild steel—a comparative study. Synth Metals 247:183–190CrossRef
5.
Liu Z, Liu Y, He BJ, Xu W, Jin G, Zhang X (2019) Application and suitability analysis of the key technologies in nearly zero energy buildings in China. Renew Sust Energy Rev 101:329–345CrossRef
6.
Jiang J, Li D (2016) Theoretical analysis and experimental confirmation of exhaust temperature control for diesel vehicle NOx emissions reduction. Appl Energy 174:232–244CrossRef
7.
8.
Avateffazeli M, Webster G, Tahmasbi K, Haghshenas M (2022) Very high cycle fatigue at elevated temperatures: a review on high temperature ultrasonic fatigue. J Space Safety Eng 9(4):488–551CrossRef
9.
Molero G et al (2019) Experimental and numerical determination of adhesive strength in semirigid multi-layer polymeric systems. Polym Test 75:85–92CrossRef
10.
Shuoran D, Zewen Z, Cong L, Tan Z, Mohammad MH, Hung-Jue S (2021) Experimental observation and finite element method modeling on scratch-induced delamination of multilayer polymeric structures. Poly Eng Sci 61(6):1742–1754CrossRef
11.
12.
Zyoud A, Abdul-Rahman NN, Campet G, Park D, Kwon H, Kim TW, Hilal HS (2016) Enhanced PEC characteristics for CdSe polycrystalline film electrodes prepared by combined electrochemical/chemical bath depositions. J Electroanaly Chem 774:7–13CrossRef
13.
Weidler N, Schuch J, Knaus F, Stenner P, Hoch S, Maljusch A, Jaegermann W (2017) X-ray photoelectron spectroscopic investigation of plasma-enhanced chemical vapor deposited NiOx, NiOx (OH)y, and CoNiO x (OH) y: influence of the chemical composition on the catalytic activity for the oxygen evolution reaction. J Phys Chem 121(12):6455–6463
14.
Xu J, Ren W, Lian Z, Yu P, Yu H (2020) A review: development of the maskless localized electrochemical deposition technology. Int J Adv Manuf Technol 110:1731–1757CrossRef
15.
16.
John XJ, Zhang KH (2019) Fundamentals of nano/microfabrication and scale effect. Mol Sensors Nanodevices (Second Edition) 2:43–111
17.
Chen J, Zhao G, Matsuda K, Zou Y (2019) Microstructure evolution and corrosion resistance of Ni–Cu–P amorphous coating during crystallization process. Appl Surface Sc 484:835–844CrossRef
18.
Faraji S, Ani FN (2015) The development supercapacitor from activated carbon by electroless plating—a review. Renew Sust Energy Rev 42:823–834CrossRef
19.
20.
ZhaiT DC, Lu L, Zhang C, Yang D (2015) Autocatalytic deposition of copper coating on poly (ether ether ketone)/multiwalled carbon nanotubes composites via a palladium-free and simplified electroless process. Mater Lett 147:46–49CrossRef
21.
Srinivasan KN, John S (2009) Electroless nickel deposition from methane sulfonate bath. J Alloys Compd 486(1–2):447–450CrossRef
22.
Yating L, Jingli P, Chunhui L, Jiacong S, Qiao X, Jien Y, Hanxin W, Yuanyan W, Jiyan S (2022) Long-term and high-bioavailable potentially toxic elements (PTEs) strongly influence the microbiota in electroplating sites. Sc Total Env 814:151933CrossRef
23.
Rodrigues SK, Machado W, Guerra JV, Geraldes M, Morales S, Vinzón SB (2020) Changes in Cd and Zn distribution in sediments after closure of an electroplating industry, Sepetiba bay, Brazil. Mar Pollut Bull 161(Part A):111758CrossRef
24.
Yu Y, Wang H, Hu J (2021) Co-treatment of electroplating sludge, copper slag, and spent cathode carbon for recovering and solidifying heavy metals. J Haz Mat 417(5):126020
25.
Chou IC, Kuo YM, Chang-Chien GP, Tsai MH (2012) Electroplating sludge metal recovering with vitrification using mineral powder additive. Res Conserv Recyc 58:45–49CrossRef
26.
Yuji F, Masahiro S, Tadashi K, Susumu A (2022) Electroplated Ni-P film for power devices without cracks induced by high temperature heating. Microelectron Reliab 133:114547CrossRef
27.
Ziping Z, Gang Y, Yuejun O, Xiamei H, Bonian H, Jun Z, Zhenjun W (2009) Studies on influence of zinc immersion and fluoride on nickel electroplating on magnesium alloys AZ91D. Appl Surf Sc 255(17):7773–7779CrossRef
28.
Uhlmann E, Jaczkowski R (2018) Mechanical pre-treatment before electroplating of aluminium alloy AlSi2. Surf Coat Tech 352(25):483–488CrossRef
29.
Rezaei M, Arabi-Jeshvaghani R, Shehverdi HR, Mojaver R, Torkamany MJ (2017) Formation of Ni-rich aluminide layers on an A356 aluminium alloy by a combined electroplating/lase alloying treatment: microstructure and tribological characteristics. J Manuf Proc 29:310–319CrossRef
30.
Kale VN, Rajesh J, Maiyalagan T, Lee CW, Gnanamuthu RM (2022) Fabrication of Ni-Mg-Ag alloy electrodeposited material on the aluminium surface using anodizing technique and their enhanced corrosion resistance for engineering application. Mat Chem Phy 282:125900CrossRef
31.
Feng M, Feng R, Pan Y, Li R, Yang R, Gong B (2022) Preparation of Si thin films on copper foil using pulse current electrodeposition. Mat Lett 324:132793CrossRef
32.
Ho PH, Ambrosetti M, Groppi G, Tronconi E, Fornasari G, Vaccari A, Benito P (2019) Electrodeposition of CeO2 and Pd-CeO2 on small pore size metallic foams: selection of deposition parameters. Catal Today 334:37–47CrossRef
33.
Aldykiewicz AJ, Davenport AJ, Isaacs HS (1996) Studies of the formation of cerium‐rich protective films using x‐ray absorption near‐edge spectroscopy and rotating disk electrode methods. J Electrochem Soc 143(1):143–147. https://​doi.​org/​10.​1149/​1.​1836400
34.
Zhou Y, Switzer JA (1996) Growth of cerium (iv) oxide films by the electrochemical generation of base method. J Alloys Compds 237(1–2):1–5CrossRef
35.
Yan TN, Xue W, Lu CH (2010) Superiorities of aluminum alloy drilling pipe and its application prospects in deep holes for geological exploration. Exploration Eng 37(2):27–29
36.
Cheng J, Sun Y, Yu Y, Wu J, Chen J, Liu J (2022) Effect of interference magnitude on ultimate strength and failure analysis of aluminum-drill-pipe-body-tool-joint-assemblies with Johnson-Cook model. Eng Fail Anal 137:106281CrossRef
37.
Yan Z, Zhien L, Wang X, Zheng H, Xu Y (2014) Cracking failure analysis and optimization on exhaust manifold of engine with CFD-FEA coupling. SAE Int J Passenger Cars - Mech Sys 7(2):873–881CrossRef
38.
Barrans SM, Khodabakhshi G, Xu Q (2014) Contact pressure distribution in joints formed by V-band clamps. Adv Mat Res 1016:34–38
39.
Xiang SM, Zhu BH, Jonsson S (2018) High-temperature corrosion-fatigue behavior of ductile cast irons for exhaust manifolds applications. Mat Sc Forum 925:369–376CrossRef
40.
Du S, Hamdi M (2020) Experimental and FEM analysis of mar behavior on amorphous polymers. Wear 203155:444–445
41.
Du S, Hamdi M, Sue HJ (2020) Finite element modeling on barrel mar behavior of amorphous polymers. ANTEC Conf Proc 1:363–367
42.
Shuoran D, Michael M, Marouen H, Hung-Jue S (2020) Quantitative modeling of scratch behavior of amorphous polymers at elevated temperatures. Polymer 197:122504CrossRef
43.
44.
45.
Hamid ZA, Aal AA (2009) New environmentally friendly noncyanide alkaline electrolyte for copper electroplating. Surf Coat Tech 203(10–11):1360–1365CrossRef
46.
Sato E, Tanoue T (1995) Present and future trends of materials for automotive exhaust system. Nippon Steel Technical Rep 354:11–16
47.
Willers A, Arens J, Mariani S, Pels H, Maessen JG, Hackeng TM, Swol J (2021) New trends, advantages and disadvantages in anticoagulation and coating methods used in extracorporeal life support devices. Membranes 11(8):617CrossRef
48.
Fayomi OSI, Akande IG, Abioye OP, Fakehinde OB (2019) New trend in thin film composite coating deposition: a mini review. Procedia Manuf 35:1007–1012CrossRef
49.
Choudhury M (2015) Experimental studies and analysis of (Zinc) coating on pipeline material
50.
Mainier FB, Dos Santos RGS, Mainier RJ (2022) Evaluation of uniformity on zinc-coated (galvanised) steel pipes applied to natural gas installations in civil construction. Aust J Civ Eng 20(2):444–453CrossRef
51.
Raja V, Kavitha M, Chokkalingam B, Ashraya TS (2020) Effect of interlayers on mechanical properties of aluminium casting over stainless steel pipe for heat exchanger applications. Trans Indian Inst Met 73:1555–1560CrossRef
52.
53.
Tao K, Zhou X, Cui H, Zhang J (2008) Preparation and properties of a nanostructured NiCrC alloy coating for boiler tubes protection. Mater Trans 49(9):2159–2162CrossRef
54.
Guermazi N, Elleuch K, Ayedi HF (2009) The effect of time and aging temperature on structural and mechanical properties of pipeline coating. Mater Des 30(6):2006–2010CrossRef
55.
Bigdeli F, Javidi M, Pakshir M (2021) A comparative study of mechanical properties and corrosion behavior of fusion-bonded epoxy and liquid epoxy coatings and their service life in drill pipe applications. Mater Res Express 8(2):025506CrossRef
56.
Riahi E, Yu X, Najafi M, Sever VF (2019) D-load strength of concrete pipes with epoxy linings. J Pipeline Syst Eng Pract 10(4):04019030CrossRef
57.
Phan N, Watanabe N, Saito Y, Hayashi S, Katayama N, Nagano H (2020) Flat-evaporator-type loop heat pipe with hydrophilic polytetrafluoroethylene porous membranes. Phys Fluids 32(4):047108
58.
Saremi-Yarahmadi S, Binner J, Vaidhyanathan B (2018) Erosion and mechanical properties of hydrothermally-resistant nanostructured zirconia components. Ceram Int 44(9):10539–10544CrossRef
59.
Encinas-Sánchez V, Macías-García A, García-Martín G, Pérez Trujillo FJ, Rodríguez-Rego JM (2023) Zirconia-based coatings for the protection of ferritic-martensitic steels in a molten salt environment for CSP technology. J Sol-Gel Sci Technol 106(3):816–826CrossRef
60.
Kilicaslan A, Zabeida O, Bousser E, Schmitt T, Klemberg-Sapieha JE, Martinu L (2019) Hard titanium nitride coating deposition inside narrow tubes using pulsed DC PECVD processes. Surf Coat Technol 377:124894CrossRef
61.
Poelma RH, Morana B, Vollebregt S, Schlangen E, van Zeijl HW, Fan X, Zhang GQ (2014) Tailoring the mechanical properties of high-aspect-ratio carbon nanotube arrays using amorphous silicon carbide coatings. Adv Func Mater 24(36):5737–5744CrossRef
62.
Song N, Liu H, Fang J (2016) Fabrication and mechanical properties of multi-walled carbon nanotube reinforced reaction bonded silicon carbide composites. Ceram Int 42(1):351–356CrossRef
63.
Aly K, Lubna M, Bradford PD (2021) Low density, three-dimensionally interconnected carbon nanotube/silicon carbide nanocomposites for thermal protection applications. J Eur Ceram Soc 41(1):233–243CrossRef
64.
Bakshi SR, Lahiri D, Agarwal A (2010) Carbon nanotube reinforced metal matrix composites-a review. Int Mater Rev 55(1):41–64CrossRef
65.
Neubauer E, Kitzmantel M, Hulman M, Angerer P (2010) Potential and challenges of metal-matrix-composites reinforced with carbon nanofibers and carbon nanotubes. Compos Sci Technol 70(16):2228–2236CrossRef
66.
Dehaghani ST, Dolatabadi A, McDonald A (2021) Thermally sprayed metal matrix composite coatings as heating systems. Appl Therm Eng 196:117321CrossRef
67.
Ogle K, Wolpers M (2003) Phosphate conversion coatings. ASM Handb 13:712–719
68.
Churikova TN, Samkova NP (2018) Selection of conversion layer applied beneath thread lubricant coating. Metallurgist 61(9–10):905–911CrossRef
69.
Adediran AA (2018) Conversion coating pretreatment enhances pipeline integrity. Am J Chem Appl 53–56
70.
Kuprin SS, Belous VA, Voyevodin VN, Bryk VV, Vasilenko RL, Ovcharenko VD, ..., V'yugov PN (2015) Vacuum-arc chromium-based coatings for protection of zirconium alloys from the high-temperature oxidation in air. J Nucl Mater 465:400–406
Metadata
Title
Chemical deposition and corrosion perspectives on the development of pipe union steel in automobile industry
Authors
Olumide Omoegun
Ojo Fayomi
Ayodeji Ayoola
Oluranti Agboola
Publication date
26-02-2024
Publisher
Springer London
Published in
The International Journal of Advanced Manufacturing Technology / Issue 9-10/2024
Print ISSN: 0268-3768
Electronic ISSN: 1433-3015
DOI
https://doi.org/10.1007/s00170-024-13199-2

Other articles of this Issue 9-10/2024

The International Journal of Advanced Manufacturing Technology 9-10/2024 Go to the issue

ORIGINAL ARTICLE

Modeling for ultrasonic vibration-assisted helical grinding of SiC particle-reinforced Al-MMCs

ORIGINAL ARTICLE

Residual stresses in gear form grinding by considering carburizing heat treatment: multi-field coupled numerical simulation and experimental verification

ORIGINAL ARTICLE

Tailoring grain structure including grain size distribution, morphology, and orientation via building parameters on 316L parts produced by laser powder bed fusion

ORIGINAL ARTICLE

Effective, versatile and inexpensive extruder system for direct ink writing of high-viscosity pastes

Critical Review

Cathode design and structure optimization of the ECM for special-shaped deep holes

Application

Research on gear profile deviation detection method based on linear structured light

Premium Partners

    Image Credits