Skip to main content
Top

2017 | OriginalPaper | Chapter

Comparative Analysis of Gain-Scheduled Wheel Slip Reset Controllers with Different Reset Strategies in Automotive Brake Systems

Authors : Miguel Cerdeira-Corujo, Adriana Costas, Emma Delgado, Antonio Barreiro

Published in: CONTROLO 2016

Publisher: Springer International Publishing

Activate our intelligent search to find suitable subject content or patents.

search-config
loading …

Abstract

Wheel slip control bases its effectiveness on operating in the maximum adherence zone, guaranteeing the correct handling of the vehicle. The use of brake-by-wire systems and electromechanical actuators, make possible the control of each wheel slip independently, improving the performance of braking systems. Several controllers are proposed to enhance the overall effectiveness of the braking maneuver. To do this, several reset strategies are compared: reset control with zero crossing, fixed reset band and variable reset band. The improvements achieved proceed from the betterment of the outputs of the system such as the transient time and the overshooting. The robustness of the system to changes in the friction conditions is also improved by reset control and reset bands.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Literature
1.
go back to reference Johansen, T.A., Petersen, I., Kalkkuhl, J., Lüdemann, J.: Gain-scheduled wheel slip control in automotive brake systems. IEEE Trans. Control Syst. Technol. 11(6), 799–811 (2003)CrossRef Johansen, T.A., Petersen, I., Kalkkuhl, J., Lüdemann, J.: Gain-scheduled wheel slip control in automotive brake systems. IEEE Trans. Control Syst. Technol. 11(6), 799–811 (2003)CrossRef
2.
go back to reference De Castro, R., Araujo, R.E., Freitas, D.: Wheel slip control of EVs based on sliding mode technique with conditional integrators. IEEE Trans. Ind. Electron. 60(8), 3256–3271 (2013)CrossRef De Castro, R., Araujo, R.E., Freitas, D.: Wheel slip control of EVs based on sliding mode technique with conditional integrators. IEEE Trans. Ind. Electron. 60(8), 3256–3271 (2013)CrossRef
3.
go back to reference Freeman, R.: Robust Slip Control for a Single Wheel. University of California, Santa Barbara (1995) Freeman, R.: Robust Slip Control for a Single Wheel. University of California, Santa Barbara (1995)
4.
go back to reference Yu, J.: A robust adaptive wheel-slip controller for antilock brake system. In: Proceedings of the 36th IEEE Conference on Decision and Control (1997) Yu, J.: A robust adaptive wheel-slip controller for antilock brake system. In: Proceedings of the 36th IEEE Conference on Decision and Control (1997)
5.
go back to reference Yi, J., Álvarez, L., Horowitz, R., De Wit, C.C.: Adaptive emergency braking control using a dynamic tire/road friction model. In: Proceedings of the 39th IEEE Conference on Decision and Control (2000) Yi, J., Álvarez, L., Horowitz, R., De Wit, C.C.: Adaptive emergency braking control using a dynamic tire/road friction model. In: Proceedings of the 39th IEEE Conference on Decision and Control (2000)
6.
go back to reference Lüdemann, J.: Heterogeneous and Hybrid Control with Application in Automotive Systems, University of Glasgow (2002) Lüdemann, J.: Heterogeneous and Hybrid Control with Application in Automotive Systems, University of Glasgow (2002)
7.
go back to reference Liu, Y., Sun, J.: Target slip tracking using gain-scheduling for antilock braking systems. In: Proceedings of the 1995 American Control Conference (1995) Liu, Y., Sun, J.: Target slip tracking using gain-scheduling for antilock braking systems. In: Proceedings of the 1995 American Control Conference (1995)
8.
go back to reference Clegg, J.: A nonlinear integrator for servomechanisms. Trans. Am. Inst. Electr. Eng. Part II: Appl. Ind. 77(1), 41–42 (1958) Clegg, J.: A nonlinear integrator for servomechanisms. Trans. Am. Inst. Electr. Eng. Part II: Appl. Ind. 77(1), 41–42 (1958)
9.
go back to reference Horowitz, I.: Quantitative feedback theory. In: IEE Proceedings D Control Theory and Applications (1982) Horowitz, I.: Quantitative feedback theory. In: IEE Proceedings D Control Theory and Applications (1982)
10.
go back to reference Horowitz, I., Rosembaum, P.: Non-linear design for cost of feedback reduction in systems with large parameter uncertainty. Int. J. Control 21(6), 977–1001 (1975)CrossRefMATH Horowitz, I., Rosembaum, P.: Non-linear design for cost of feedback reduction in systems with large parameter uncertainty. Int. J. Control 21(6), 977–1001 (1975)CrossRefMATH
11.
go back to reference Seron, M.M., Braslavsky, J.H., Goodwin, G.C.: Fundamental Limitations in Filtering and Control. Springer Science & Business Media (2012) Seron, M.M., Braslavsky, J.H., Goodwin, G.C.: Fundamental Limitations in Filtering and Control. Springer Science & Business Media (2012)
13.
go back to reference Baños, A., Vidal, A.: Definition and tuning of a PI+CI reset controller. In: Control Conference (ECC), 2007 European (2007) Baños, A., Vidal, A.: Definition and tuning of a PI+CI reset controller. In: Control Conference (ECC), 2007 European (2007)
14.
go back to reference Baños, A., Barreiro, A.: Reset Control Systems. Springer Science & Business Media (2011) Baños, A., Barreiro, A.: Reset Control Systems. Springer Science & Business Media (2011)
15.
go back to reference Vidal, A., Baños, A.: QFT-based design of PI+CI reset compensators: application in process control. In: 16th Mediterranean Conference on Control and Automation (2008) Vidal, A., Baños, A.: QFT-based design of PI+CI reset compensators: application in process control. In: 16th Mediterranean Conference on Control and Automation (2008)
16.
go back to reference Vidal, A., Baños, A.: Reset compensation for temperature control: experimental application on heat exchangers. Chem. Eng. J. 159(1), 170–181 (2010)CrossRef Vidal, A., Baños, A.: Reset compensation for temperature control: experimental application on heat exchangers. Chem. Eng. J. 159(1), 170–181 (2010)CrossRef
17.
go back to reference Delgado, E., Barreiro, A., Díaz-Cacho, M., Falcón, P.: Wheel slip reset controller in automotive brake systems. In: International Electric Vehicle Conference (IEVC). IEEE, Florence, Italy (2014) Delgado, E., Barreiro, A., Díaz-Cacho, M., Falcón, P.: Wheel slip reset controller in automotive brake systems. In: International Electric Vehicle Conference (IEVC). IEEE, Florence, Italy (2014)
18.
go back to reference Lee, C., Hedrick, K., Yi, K.: Real-time slip-based estimation of maximum tire-road friction coefficient. IEEE/ASME Trans. Mechatron. 9(2), 454–458 (2004)CrossRef Lee, C., Hedrick, K., Yi, K.: Real-time slip-based estimation of maximum tire-road friction coefficient. IEEE/ASME Trans. Mechatron. 9(2), 454–458 (2004)CrossRef
19.
go back to reference Rajamani, R., Phanomchoeng, G., Piyabongkarn, D., Lew, J.Y.: Algorithms for real-time estimation of individual wheel tire-road friction coefficients. IEEE/ASME Trans. Mechatron. 17(6), 1183–1195 (2012)CrossRef Rajamani, R., Phanomchoeng, G., Piyabongkarn, D., Lew, J.Y.: Algorithms for real-time estimation of individual wheel tire-road friction coefficients. IEEE/ASME Trans. Mechatron. 17(6), 1183–1195 (2012)CrossRef
20.
go back to reference Solyom, S., Rantzer, A., Lüdemann, J.: Synthesis of a model-based tire slip controller. Veh. Syst. Dyn. 41(6), 475–499 (2004)CrossRef Solyom, S., Rantzer, A., Lüdemann, J.: Synthesis of a model-based tire slip controller. Veh. Syst. Dyn. 41(6), 475–499 (2004)CrossRef
21.
go back to reference Pacejka, H.B., Bakker, E.: The magic formula tyre model. Veh. Syst. Dyn. 1–18 (1992) Pacejka, H.B., Bakker, E.: The magic formula tyre model. Veh. Syst. Dyn. 1–18 (1992)
22.
go back to reference Pacejka, H.B.: Tire and Vehicle Dynamics. Elsevier (2005) Pacejka, H.B.: Tire and Vehicle Dynamics. Elsevier (2005)
23.
go back to reference Aström, K.J., Hägglund, T.: The future of PID control. Control Eng. Pract. 9(11), 1163–1175 (2001)CrossRef Aström, K.J., Hägglund, T.: The future of PID control. Control Eng. Pract. 9(11), 1163–1175 (2001)CrossRef
24.
go back to reference Baños, A., Vidal, A.: Design of PI+CI Reset Compensators for second order plants. In: IEEE International Symposium on Industrial Electronics (2007) Baños, A., Vidal, A.: Design of PI+CI Reset Compensators for second order plants. In: IEEE International Symposium on Industrial Electronics (2007)
25.
go back to reference Mercader, P., Baños, A.: Robust PI compensators design for FOPDT systems with large uncertainty. In: 14th International Conference on Control, Automation and Systems (ICCAS) (2014) Mercader, P., Baños, A.: Robust PI compensators design for FOPDT systems with large uncertainty. In: 14th International Conference on Control, Automation and Systems (ICCAS) (2014)
26.
go back to reference Davó Navarro, M.: Analysis and Design of Reset Control Systems (2015) Davó Navarro, M.: Analysis and Design of Reset Control Systems (2015)
Metadata
Title
Comparative Analysis of Gain-Scheduled Wheel Slip Reset Controllers with Different Reset Strategies in Automotive Brake Systems
Authors
Miguel Cerdeira-Corujo
Adriana Costas
Emma Delgado
Antonio Barreiro
Copyright Year
2017
DOI
https://doi.org/10.1007/978-3-319-43671-5_63