Top

Published in:

2019 | OriginalPaper | Chapter

Comparison of Methods for Computing a Target Point for Aspirations and Biopsies

Authors : Adam Ciszkiewicz, Grzegorz Milewski

Published in: Biomechanics in Medicine and Biology

Publisher: Springer International Publishing

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

The aim of this study was to compare three methods for computing a target point for use in autonomous or semi-autonomous aspirations and biopsies. Given a 3D binary image of the object of interest, the procedures computed the target point. The following approaches were tested: the method #1 - center of mass, the method #2 - largest projection area + largest empty circle and the method #3 - largest empty circle + largest empty circle. Each procedure was tested on four cases obtained from Magnetic Resonance Imaging scans used to diagnose Baker’s cysts. The methods were analyzed and compared in terms of their safety and computation time. In terms of safety, the best results were obtained with the third procedure, which used the largest empty circle + largest empty circle combination. The second method - the largest projection area + largest empty circle - offered good compromise between safety and computation time. It can be used to estimate target points for medical tool path planning in aspiration or biopsy.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Wirtschaft"

Online-Abonnement

Mit Springer Professional "Wirtschaft" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 340 Zeitschriften

aus folgenden Fachgebieten:

Bauwesen + Immobilien
Business IT + Informatik
Finance + Banking
Management + Führung
Marketing + Vertrieb
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

previous chapter Influence of Elevated Temperature During Crimping on Results of Numerical Simulation of a Bioresorbable Stent Deployment Process

next chapter Predictive Models in Biomechanics

Scheil-Adlung, X., Behrendt, T., Wong, L.: Health sector employment: a tracer indicator for universal health coverage in national Social Protection Floors. Hum. Resour. Health 13, 1–8 (2015). https://doi.org/10.1186/s12960-015-0056-9CrossRef

Ciszkiewicz, A., Milewski, G.: A novel kinematic model for a functional spinal unit and a lumbar spine. Acta Bioeng. Biomech. 18 (2016). https://doi.org/10.5277/abb-00324-2015-03

Sancisi, N., Parenti-Castelli, V.: A 1-Dof parallel spherical wrist for the modelling of the knee passive motion. Mech. Mach. Theory 45, 658–665 (2010). https://doi.org/10.1016/j.mechmachtheory.2009.11.009CrossRefMATH

Pappalardo, O.A., Sturla, F., Onorati, F., Puppini, G., Selmi, M., Luciani, G.B., Faggian, G., Redaelli, A., Votta, E.: Mass-spring models for the simulation of mitral valve function: looking for a trade-off between reliability and time-efficiency. Med. Eng. Phys. 47, 93–104 (2017). https://doi.org/10.1016/j.medengphy.2017.07.001CrossRef

Basafa, E., Farahmand, F.: Real-time simulation of the nonlinear visco-elastic deformations of soft tissues. Int. J. Comput. Assist. Radiol. Surg. 6, 297–307 (2011). https://doi.org/10.1007/s11548-010-0508-6CrossRef

Cicek, Y., Duysak, A.: The modelling of interactions between organs and medical tools: a volumetric mass-spring chain algorithm. Comput. Methods Biomech. Biomed. Eng. 17, 488–496 (2014). https://doi.org/10.1080/10255842.2012.694875CrossRef

Assi, K.C., Grenier, S., Parent, S., Labelle, H., Cheriet, F.: A physically based trunk soft tissue modeling for scoliosis surgery planning systems. Comput. Med. Imag. Graph. 40, 217–228 (2015). https://doi.org/10.1016/j.compmedimag.2014.11.002CrossRef

Mohammadi, A., Ahmadian, A., Rabbani, S., Fattahi, E., Shirani, S.: A combined registration and finite element analysis method for fast estimation of intraoperative brain shift; phantom and animal model study. Int. J. Med. Robot. Comput. Assist. Surg. 13, e1792 (2017). https://doi.org/10.1002/rcs.1792CrossRef

Villard, P.-F., Hammer, P.E., Perrin, D.P., del Nido, P.J., Howe, R.D.: Fast image-based mitral valve simulation from individualized geometry. Int. J. Med. Robot. Comput. Assist. Surg. 14, e1880 (2018). https://doi.org/10.1002/rcs.1880CrossRef

10.

Ciszkiewicz, A., Milewski, G.: Path planning for minimally-invasive knee surgery using a hybrid optimization procedure. Comput. Methods Biomech. Biomed. Eng. 21, 47–54 (2018). https://doi.org/10.1080/10255842.2017.1423289CrossRef

11.

Olszewski, R., Villamil, M.B., Trevisan, D.G., Nedel, L.P., Freitas, C.M.D.S., Reychler, H., Macq, B.: Towards an integrated system for planning and assisting maxillofacial orthognathic surgery. Comput. Methods Programs Biomed. 91, 13–21 (2008). https://doi.org/10.1016/j.cmpb.2008.02.007CrossRef

12.

Luboz, V., Ambard, D., Swider, P., Boutault, F., Payan, Y.: Computer assisted planning and orbital surgery: patient-related prediction of osteotomy size in proptosis reduction. Clin. Biomech. 20, 900–905 (2005). https://doi.org/10.1016/j.clinbiomech.2005.05.017CrossRef

13.

Adolphs, N., Haberl, E.-J., Liu, W., Keeve, E., Menneking, H., Hoffmeister, B.: Virtual planning for craniomaxillofacial surgery–7 years of experience. J. Craniomaxillofac. Surg. 42, e289–e295 (2014). https://doi.org/10.1016/j.jcms.2013.10.008CrossRef

14.

Napalkova, L., Rozenblit, J.W., Hwang, G., Hamilton, A.J., Suantak, L.: An optimal motion planning method for computer-assisted surgical training. Appl. Soft Comput. 24, 889–899 (2014). https://doi.org/10.1016/j.asoc.2014.08.054CrossRef

15.

Vrooijink, G.J., Abayazid, M., Patil, S., Alterovitz, R., Misra, S.: Needle path planning and steering in a three-dimensional non-static environment using two-dimensional ultrasound images. Int. J. Rob. Res. 33, 1361–1374 (2014). https://doi.org/10.1177/0278364914526627CrossRef

16.

Hassouna, M.S., Farag, A.A., Hushek, S.G.: 3D path planning for virtual endoscopy. Int. Congr. Ser. 1281, 115–120 (2005). https://doi.org/10.1016/j.ics.2005.03.142CrossRef

17.

Zarychta, P., Badura, P., Pietka, E.: Comparative analysis of selected classifiers in posterior cruciate ligaments computer aided diagnosis. Bull. Polish Acad. Sci. Tech. Sci. 65, 63–70 (2017). https://doi.org/10.1515/bpasts-2017-0008CrossRef

18.

Szwarc, P., Kawa, J., Rudzki, M., Pietka, E.: Automatic brain tumour detection and neovasculature assessment with multiseries MRI analysis. Comput. Med. Imag. Graph. 46, 178–190 (2015). https://doi.org/10.1016/j.compmedimag.2015.06.002CrossRef

19.

Shan, L., Zach, C., Charles, C., Niethammer, M.: Automatic atlas-based three-label cartilage segmentation from MR knee images. Med. Image Anal. 18, 1233–1246 (2014). https://doi.org/10.1016/j.media.2014.05.008CrossRef

20.

Araújo, T., Abayazid, M., Rutten, M.J.C.M., Misra, S.: Segmentation and three-dimensional reconstruction of lesions using the automated breast volume scanner (ABVS). Int. J. Med. Robot. Comput. Assist. Surg. (2016). https://doi.org/10.1002/rcs.1767CrossRef

21.

Abdolali, F., Zoroofi, R.A., Otake, Y., Sato, Y.: Automatic segmentation of maxillofacial cysts in cone beam CT images. Comput. Biol. Med. 72, 108–119 (2016). https://doi.org/10.1016/j.compbiomed.2016.03.014CrossRef

22.

Markiewicz, T., Dziekiewicz, M., Osowski, S., Maruszynski, M., Kozlowski, W., Boguslawska-Walecka, R.: Thresholding techniques for segmentation of atherosclerotic plaque and lumen areas in vascular arteries. Bull. Polish Acad. Sci. Tech. Sci. 63, 269–280 (2015). https://doi.org/10.1515/bpasts-2015-0031CrossRef

23.

Ciszkiewicz, A., Lorkowski, J., Milewski, G.: A novel planning solution for semi-autonomous aspiration of Baker’s cysts. Int. J. Med. Robot. Comput. Assist. Surg. 14, e1882 (2018). https://doi.org/10.1002/rcs.1882CrossRef

24.

Mason, D.: SU-E-T-33: Pydicom: An Open Source DICOM Library. Med. Phys. 38, 3493 (2011). https://doi.org/10.1118/1.3611983CrossRef

25.

van der Walt, S., Colbert, S.C., Varoquaux, G.: The NumPy array: a structure for efficient numerical computation. Comput. Sci. Eng. 13, 22–30 (2011). https://doi.org/10.1109/MCSE.2011.37CrossRef

26.

Toussaint, G.T.: Computing largest empty circles with location constraints. Int. J. Comput. Inf. Sci. 12, 347–358 (1983). https://doi.org/10.1007/BF01008046MathSciNetCrossRefMATH

27.

Moustris, G.P., Hiridis, S.C., Deliparaschos, K.M., Konstantinidis, K.M.: Evolution of autonomous and semi-autonomous robotic surgical systems: a review of the literature. Int. J. Med. Robot. Comput. Assist. Surg. 7, 375–392 (2011). https://doi.org/10.1002/rcs.408CrossRef

28.

Herghelegiu, P.-C., Manta, V., Perin, R., Bruckner, S., Gröller, E.: Biopsy planner–visual analysis for needle pathway planning in deep seated brain tumor biopsy. In: Computer Graphics Forum, pp. 1085–1094. Wiley Online Library (2012)

29.

Liang, K., Rogers, A.J., Light, E.D., von Allmen, D., Smith, S.W.: 3D ultrasound guidance of autonomous robotic breast biopsy: feasibility study. Ultrasound Med. Biol. 36, 173–177 (2010). https://doi.org/10.1016/j.ultrasmedbio.2009.08.014CrossRef

Title: Comparison of Methods for Computing a Target Point for Aspirations and Biopsies
Authors: Adam Ciszkiewicz
Grzegorz Milewski
Publisher: Springer International Publishing
Book: Biomechanics in Medicine and Biology
Print ISBN: 978-3-319-97285-5

Electronic ISBN: 978-3-319-97286-2

Copyright Year: 2019
DOI: https://doi.org/10.1007/978-3-319-97286-2_8

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Springer Professional "Wirtschaft"

Premium Partner